PentaxメーカーOptio S50の使用説明書/サービス説明書
ページ先へ移動 of 138
• Printed on recycl ed paper • Specific ations and ext ernal dimen sions are subj ect to change without notice . 57418 Copyright © PENTAX Cor poration 2004 01-200408 Pr inted in the Philippine s PENTAX Corporation 2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.
Thank you for purchasing the PENTAX Optio S50 Digital Camera. Please read this manual before using t he camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand all the camera’s capabilities.
1 Sufficient attention has been paid to the safety of this product but ple ase pay particular attention to the warnings indicated by the following symbols during use. Warning • Do not attempt to take the camera apart or remodel the camera. Hi gh voltages are present within th e camera, and there i s therefore a danger of electric shocks.
2 Caution • Never try to disassemble or short t he battery. Also, do not dispose of the battery in fire, as i t may explode. • Do not charge any bat teries other than rechargeable Ni-MH batt eries. The battery could explod e or catch fire. Of the batteri es that can be used in this camera, only the Ni-MH battery ca n be recharge d.
3 Caution • Do not place heavy objects on the AC plug cord, allow heavy obje cts to drop onto it or allow the AC plug cord to become dama ged due to excessive bending. If the AC plug cord becomes damaged, consu lt a PENTAX Service Center. • Do not short or touch the ou tput termina ls of the pro duct while it is still plugged in.
4 • Take the international warrant y card with you when you tra vel abroad. Also take the Wo rldwide Service Network t hat is included in the package.
5 • If the camera is subjected t o rapid temperatu re changes, co ndensation may form on the inside and out side of the camera . Therefore put the ca mera in a bag or plastic bag, a nd take the camera out when the dif ference in t emperature has subsided.
6 FOR SAFE USE OF YOUR CAMERA ............................................. 1 Care to be Taken During Handling ................................................... 4 Contents .......................................................................... ..
7 Setting the Functions (Program Mode) ............................ ............... 42 Selecting the Picture Mode According to the Shooting Scene (Picture Mode) ................................................................................ 43 Taking Pictures of Dark Scenes (Night-Scene Mode) .
8 Playing Back Movies ...................................................................... 88 Displaying Shooting Information in Playback Mode ....................... 89 Nine Image Display ............................................................
9 This operating manual contains the followin g chapters. 1 Getting Started ––––––––––––– –––––––––––––– –––––––––––––– This chapter explains what you nee d to do after pu rchasing the camera bef ore you start taking pictures.
10 Items marked with an asterisk ( ∗ ) are also available as optional accessories. For other optional accessories, refe r to “Optional Accessories” (p.
11 Front Back Names of Parts Shutter relea se button Remote control receiver Self-timer lamp Power switch Flash PC/AV ter minal Lens DC input terminal Terminal cover Speaker Viewfinder Microphone Card cover Viewfinder Battery cover Tripod socket Focus status lamp (green) Flash status lamp (red) Strap lug LCD monitor Mode dial e_kb376.
12 Guide Indications A guide to a vailable button operations appears on the LCD mon itor during operation. The buttons are indicated as shown below. Names of Operating Parts Four-way co ntroller ( 2 ).
13 1 Getting Started Getting Started Attaching the Strap Pass the narrow end of the strap thr ough the strap lug and pass the other end through the loop.
14 1 Getting Started Powering the Camera Insert the batter ies in the camera. Use two AA alkaline, AA lithium, AA Ni-MH, or AA nickel mangan ese batteries or one CR-V3 battery. 1 Open the b attery co ver. Slide the battery cove r in the direction ind icated by the arrow an d flip the co ver open .
15 Getting Started 1 • Number of Recorda ble Images and Playba ck Time (at 23°C with new batteries) • The still p icture storage capacity is based on measuring conditions in accordance with CIPA standards and the playback time is based on PENTAX measuring conditions.
16 Getting Started 1 If you intend to use the LCD monitor for a long time or connect the camera to a PC, use of the AC adapter D-AC5 is recommended. 1 Make sure that the ca mera is turned off and open the terminal cover. 2 Connect the DC terminal on the AC adapt er to the DC input terminal on the camera.
17 1 Getting Started Installing the SD Memory Card This camera uses an SD Memory Card. Captured imag es are recorded on the SD Memory Card if a card is inserted ( appears on the LCD monitor) or in the built-in memory if no card is inserted ( appears on the LCD monitor).
18 Getting Started 1 Precaution s When Us ing an SD M emory Car d • Make sure t hat the camera is turned off before opening the card cover. • The SD Memory Card is equipped with a write-protect switch.
19 Getting Started 1 Choose the number of recorded pixels and quality best suited to your purpose. Higher quality levels and numbers of recorded pixels produce clearer images for printing, but th e resulting incre ase in data volume reduces the total number of pictures that can be taken.
20 Getting Started 1 Appropriate Quality According to Use (Auto Select Mo de) The default sett ing is Super. The Number of Recordable Images by Size and Quality • The above table indicates the app rox. num ber of images when using th e built- in memory (approx.
21 1 Getting Started Turning the Camera On and Off 1 Press the power switch. The camera turns on. The lens cover ope ns and the l ens extends when t he camera is t urned on. 2 Press the power switch ag ain. The camera tur ns off. When the camera is turned on in the Playback On ly mode, the lens does not extend.
22 Getting Started 1 Voice Recording Only mod e is for recordi ng sound only. The lens does not extend in this mode. You can use the camera as a voice recorder. 1 Set the mod e dial to O and p ress the pow er switch. The camera turns on in Voice Recordi ng Only mode.
23 1 Getting Started Initial Settings If the Initial Settings screen or Date Adjust screen appears when you turn the camera on, follow the procedure below to set the display language and/or current date a nd time. If the Initial Settings screen appears 1 p.
24 Getting Started 1 Set the current date and time and the display style. 1 Use the four-way controller ( 23 ) to choose the date and time display st yle. 2 Press the four-way contr oller ( 5 ). 2 and 3 appear above and below [24H]. 3 Use the four-way controller ( 23 ) to select [24H] (24-hour display) o r [12H] (12-hour display) .
25 Getting Started 1 8 Repeat Step 7 to change th e [year], [hour] and [minutes]. Choose AM or PM if you selected [ 12h] in Step 3. 9 Press the OK button when yo u have finished the settings. The camera is ready to take pictures . If you set the date and time using the MENU button, you wil l return to the Menu screen.
26 2 Quick Start Quick Start Taking Still Pictures The standard pro cedure for taking still p ictures is described bel ow. The flash fires automatically depe nding on the light conditions. 1 Press the power switch. The camera turns on. 2 Set the mod e dial to R .
27 2 Quick Start The shutter relea se button works in a two-step action as follows. Press halfway The focus and exposure are locked when the shutter relea se button is pressed lightly (halfway). The shutter speed and aperture settings onl y appear on the LCD mo nitor when the shutter release button is p ressed halfway.
28 2 Quick Start Quick Start Playing Back Still Pictures You can display the still picture you have just taken. 1 Press the Q Playback bu tton after taking a pict ure.
29 2 Quick Start 1 Press the Q Playback bu tton after taking a pictu re. The image appears on the LCD monit or. 2 Press the four-way contr oller ( 3 ). You can delet e the image di splayed on the LCD monitor by pre ssing the i but ton, using the four- way controller ( 2 ) to select [Del ete] and pressing the OK button.
30 3 Common Operations Common Operations Using the Button Functions Q Playback button Switches to the Playb ack mode. Press it and hold it down to retr act the lens. ( 1 p.28) Zoom button You can change the shooting area by pressing the Zoom button. ( 1 p.
31 Common Operations 3 i button Deletes the image displayed on the LCD monitor. ( 1 p.92 ) Q Playback button Switches to the Capture mode. ( 1 p.28 ) Zoom/ f / y button Press f during norm al playback to display nine im ages at once.
32 Common Operations 3 Shutter release button When pressed, starts record ing, and when pressed again, st ops recording. ( 1 p.80) Q Playback button Switches to the Playb ack mode. When pressed again, returns to Voice Recording mode. ( 1 p.80) Four-way controller (in Playback mode) ( 2 ) Star ts playback.
33 3 Common Operations Using the Menus When you press the MENU button, the menus appear on the LCD monitor. You can set functions, save the setti ngs and change the camera settings on these men us. When you are making settings from a menu, a guide to operation appears on the LCD monitor.
34 Common Operations 3 Example of Menu Operation AWB Recorded Pixels Quality Level White Balance Focusing Area Multi Auto AE Metering Sensitivity 2560 Rec. Mode MENU OK OK O K OK Exit E x i t Exit AWB 2560 Recorded Pixels Quality Level Focusing Area Multi Auto AE Metering Sensitivity Rec.
35 Common Operations 3 The [ A Rec. Mode] menu appears when you press the MENU button in Capture mode, and the [ Q Playback] menu appears when you press the MENU button in Playback mode.
36 Common Operations 3 Pressing the zoom bu tton ( x ) while a menu is displayed enlarges the menu. Press w to return to the original display. Example of Menu Opera tion Enlarging a Menu Display If yo.
37 Common Operations 3 [ A Rec. Mode] Me nu Yes ... Adjustable # ... Any changes made are invalid in d , H and = modes. No ... A ny changes made are invalid. You can change the setting on the menu, but any changes you make are invalid in actual operation.
38 Common Operations 3 [ Q Playback] Menu [ B Set-up] Menu ∗ The “Fn settings” is not available in the mode. Item Description Page Protect For protecting images from dele tion p.95 DPOF For setting the printi ng service to print out images p.104 Slideshow For playing back recorded images successively p.
39 Memo e_kb376.book Page 39 Tuesday, Au gust 10, 2004 1:46 PM.
40 4 Taking Pictures Taking Pictures Setting the Shooting Functions - (Auto Select) mode is the simplest way to take pictures without having to set any functions. The camera automatically chooses the optimal settings for t he shooti ng scene wh en the shut ter release button is pressed halfwa y.
41 Taking Pictures 4 You can display the Help screen while taking or viewing pi ctures in Auto Select mode. The Help screen describes the function of each button, such as the four-way contro ller keys and zoom button. 1 Set the mod e dial to - . 2 Press the 0 button.
42 Taking Pictures 4 In R (Program) mode, the camera automatically sets the shutter speed and aperture for taking sti ll pictures . However, you can sel ect other functions such as the flash mode or conti nuous shooting mode. 1 Set the mod e dial to R .
43 Taking Pictures 4 You can select the Picture mode according to the shooting sce ne. There are ten available modes in Picture mode. 1 Set the mod e dial to d .
44 Taking Pictures 4 3 Use the four-way controller ( 2345 ) to choose the Picture mode. 4 Press the OK button. The Picture mode i s selected. 5 Press the shutter relea se button halfway. The focus frame turns green if the subject is in focus. 6 Press the shutter relea se button fully.
45 Taking Pictures 4 You can take pictur es of dark scenes, such as nightscapes, with the appropriate settin gs. 1 Set the mod e dial to . . 2 Press the shutter relea se button halfway. The focus frame turns green if the subject is in focus. 3 Press the shutter relea se button fully.
46 Taking Pictures 4 This mode lets you take landscape views using the optimal settings. 1 Set the mod e dial to H . 2 Press the shutter relea se button halfway. The focus frame turns green if the subject is in focus. 3 Press the shutter relea se button fully.
47 Taking Pictures 4 This mode lets you take movies. Sound can be recorded at the same time. 1 Set the mod e dial to C . The following in formation appears on th e LCD monitor. 1 Flash Off icon 2 Movie mode icon 3 Card/Built-in memory 4 Recordable time 2 Press the shutter relea se button.
48 Taking Pictures 4 Recording starts when you keep the shutter release button pressed for more than one second. Pictures will be taken for as long as you keep the button pressed. Recording stops when you take your finge r off the shutter release button.
49 Taking Pictures 4 • Sound will not b e recorded in Marine Movie mode. • The optical zoom is not availabl e during shooting in Marine Movie mode. Only the digital zoom can be used during shooting. • The flash will not discharge in Marine Movie mode.
50 Taking Pictures 4 - d R + C . H = You can use the zoom to change the shooting area. 1 Press the Zoom/ w / x butt on in Capture mode. x (Tele) : enlarges the subject. w (Wide) : enlarges the area captured by the camera. The digital zoom functi on is turned on in initial setti ngs.
51 Taking Pictures 4 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Digital Zoom]. 3 Use the four-way controller ( 45 ) to select P (Off). 4 Press the OK button. The camera is ready to take pictu res.
52 Taking Pictures 4 - d R + C . H = 1 Press the four-way contr oller ( 2 ) in Captur e mode to display g or r on the LCD monitor. 2 Press the shutter relea se button halfway. The focus frame turns green if th e subject is in focus. 3 Press the shutter relea se button fully.
53 Taking Pictures 4 - d R + . H = Pictures are taken continuously while the shutter release button is pressed. 1 Press the four-way contr oller ( 2 ) in Capture mode to display j on the LCD monitor. 2 Press the shutter relea se button halfway. The focus frame turns green if th e subject is in focus.
54 Taking Pictures 4 - d R + C . H = You can switch the Drive mode to Remo te Control mode and take pictures using the remote control unit for Pentax camera s (optional). The remote control receiver is on the front of the camera. Operate the remote control unit to ward the camera lens.
55 Taking Pictures 4 Life of the Battery for the Rem ote Control Unit A signal can be sent from the remote control unit to the camera approximately 30,000 times. Contact your nearest PENTA X customer se rvice center if the battery needs changing. (A charge is made for changing the battery.
56 Taking Pictures 4 + You can take two imag es in succession an d place them side b y side to form a single picture. The first image is positioned in th e left half of the picture and the second image in the righ t half. 1 Set the mod e dial to + . 2 Press the four-way contr oller ( 3 ).
57 Taking Pictures 4 + You can take a numb er of images and join them together to form a panorama picture. The software (ACDSee for PENTAX) on the CD-ROM (S-SW26) provided w ith the camera a nd a computer are necessary for joining the images.
58 Taking Pictures 4 6 Take the first image. Press the shutter rele ase button to take the first image. The right edge of the image appears in semi-tra nsparent form o n the left of the LCD monitor. 7 Move the camera to the right and take the second image.
59 4 Taking Pictures Setting the Shooting Functions Capture mode is for taking pictures and Playback mode is for playing back or deleting i mages. • To change from Capture mode to Playback mode, p ress the Q Playback button.
60 Taking Pictures 4 The LCD monitor display changes each time you press the DISPLAY button. Display On Shooting information is displa yed when the power is turned on.
61 Taking Pictures 4 - d R + C . H = Focus mode 1 Press the four-way contr oller ( 5 ) in Captur e mode. The focus mode c hanges each ti me the button is pressed and the icon appears on the LCD monitor. The camera is ready to take pictu res in the selected foc us mode.
62 Taking Pictures 4 When the mode is set to z (Manual Focus), the central portion of the picture is enlarged to full screen on the LCD monitor for focus adjustment. Pressing the four-way controll er ( 23 ) displays the indi cator on the LCD monitor. Use the indicator as a guide while adjustin g the focus with the four-way controller ( 23 ).
63 Taking Pictures 4 - d R + . H = Flash Mode s 1 Press the four-way contr oller ( 4 ) in Captur e mode. The flash mode chan ges each time the butt on is pressed a nd the icon appears on the LCD mo nitor. The camera is ready to take pictu res in the selected fl ash mode.
64 Taking Pictures 4 d R + . H = You can choose the number of recorded pixel s from [2560×1920], [2304×1728], [2048× 1536], [1600×1 200], [1024× 768] and [640×480]. The more pixels there are, the larger the picture and the bigger the file size. The data volume also varies depending on the quality level setting ( 1 p.
65 Taking Pictures 4 d R + . H = You can choose the image compression rate. The more stars, the clearer the qua lity and the larger the volume. The data volume also varies dependin g on the recorded pixels setting ( 1 p.64). Quality Levels 1 Press the MENU button in Capture mode.
66 Taking Pictures 4 - You can set the recorded pixels and quality together in Auto Select Mode. The combination of recorded pixels and quality for each setting is shown below. Image Quality * The letter M on screen indicates megaby tes ( MB). 1 MB is 1 million pixels.
67 Taking Pictures 4 R + C . You can take pictur es in natural colors by adjusting th e white bala nce according to the light conditions at the time of shooting. White Balance 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [White Balance].
68 Taking Pictures 4 Have a blank sheet of white paper ready. 1 Select [ K ] (manual) on the [White Balan ce] screen. 2 Point the camera at the blank sheet of paper so that it fills the frame of the LCD monitor . 3 Press the OK button. The white bala nce is auto matically adjusted.
69 Taking Pictures 4 d R + . H = You can change the a utofocus area (Fo cusing Area). Focusing Area 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Fo cusing Area]. 3 Use the four-way controller ( 45 ) to change the setting .
70 Taking Pictures 4 d R + C . H = You can choose which part of the screen to use to measure the brightness and determine the exposure. AE Metering Modes 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [AE Metering].
71 Taking Pictures 4 d R + . H = You can select the sensiti vity to su it the b rightness of the surroundi ngs. Sensitivity 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Sensitivit y].
72 Taking Pictures 4 C You can choose 30 fps (frames per second) or 15 fps for the frame rate. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Frame Rate]. 3 Use the four-way controller ( 45 ) to change the frame rat e.
73 Taking Pictures 4 d R + . H = You can choose the Instant Review ti me from 0.5 sec., 1 sec., 2 sec., 3 sec., 5 sec. and Off (no display). 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Instant Review].
74 Taking Pictures 4 R + . You can choose whether you want the image to have sharp or soft outlines. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Sha rpness]. 3 Use the four-way controller ( 45 ) to change the setting from x [Normal] to z [Hard (+)] o r y [Soft (–)] .
75 Taking Pictures 4 R + . You can set the color saturation. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way cont roller ( 23 ) to select [Satura tion]. 3 Use the four-way cont roller ( 45 ) to change the setting from x [Normal] to z [High (+)] or y [Low (–)].
76 Taking Pictures 4 R + . You can set the image contrast. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way cont roller ( 23 ) to select [Contras t]. 3 Use the four-way cont roller ( 45 ) to change the setting from x [Normal] to z [High (+)] or y [Low (–)].
77 Taking Pictures 4 d R + C . H = You can adjust the overall brightne ss of the picture. Use this function to take pictures that are intentionally overexp osed or underexposed. 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears.
78 4 Taking Pictures Saving the Settings You can choose whether you want the set values to be saved when the camera is turned off. If you select O (On), the settings will be saved in the status they were in immediately before the camera was turned off.
79 Taking Pictures 4 1 Press the MENU button in Capture mode. The [ A Rec. Mode] menu appears. 2 Use the four-way controller ( 23 ) to select [Me mory]. 3 Press the four-way contr oller ( 5 ). The [Memory] menu appears. 4 Use the four-way controller ( 23 ) to choose an item.
80 5 Recording and Play back Recording and Playback Recording Sound (Voi ce Recording Mode) You can record sound. The recordable time appears on the LCD monitor according to how much space is available on the SD Memory Card or the built-in memory. 1 Set the mod e dial to O an d press the p ower swit ch.
81 5 Recording and Play back Playing Back Sound You can play back the recording you made in Voice Recordi ng mode. 1 Press the Q Playback bu tton. 2 Use the four-way controller ( 45 ) to choose the recording t o play back. 3 Press the four-way contr oller ( 2 ).
82 5 Recording and Play back Adding Sound (Voice Memo) to Images You can add sound (voice memo) to a captured image. 1 Enter the Playback mode and use the four-way controlle r ( 45 ) to choose the image t o which you want to add a voice memo.
83 5 Recording and Play back You can set the camera not to reco rd voice memos while playing back still images to prevent any voice memo from being recorded. 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [ Record Voice Memo ].
84 5 Recording and Play back 1 Enter the Playback mode and use the four-way controlle r ( 45 ) to choose the image with the voice memo that you want to play bac k. If U appears, a voice memo has been recorded for the d isplayed image. 2 Press the four-way contr oller ( 2 ).
85 Memo e_kb376.book Page 85 Tuesday, Au gust 10, 2004 1:46 PM.
86 6 Playback/Deleting/Editin g Playback/Deleting/Editing Playing Back Images Press the Q Playback button. Refer to “Playing Back Ima ges” (p.28) for instructions. You can display images magnifie d up to 12 times. A guide to operation appears on the LCD monitor during magnificatio n.
87 6 Playback/Deleting/Editin g You can display the image at maximum magnification simply by pressing the Zoom/ f / y button once d uring zoom playback. 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [ Quick Zoom ].
88 6 Playback/Deleting/Editin g You can play back movies. A guide to operation app ears on the LCD monitor during playba ck. You can pla y back the recording you made in Voice Recording mode at the same time. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choose the movie to play back.
89 6 Playback/Deleting/Editin g Shooting information can be d isplayed on the LCD monitor in Playba ck mode. Pressing the DISPLAY button changes the display mode.
90 6 Playback/Deleting/Editin g You can display n ine images at the same time. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choose an image. 2 Press w / f on the Zoom/ f / y button. Nine images appear. Use the four-way controller ( 2345 ) to choose an image.
91 6 Playback/Deleting/Editin g You can play back all the image s on the SD Memory Card or in the built- in memory continuousl y. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choo se the image with which t o start the slideshow.
92 6 Playback/Deleting/Editin g Deleting You can delete images and sound recordings one at a time. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choose the image or sound to delete. 2 Press the i button. The Delete screen appears.
93 6 Playback/Deleting/Editin g If an image has a voice memo, you can delete the voice memo without deleting the image. 1 Enter the Playback mode and use the four-way controller ( 45 ) to choose an image with a voice memo to delete. 2 Press the i button.
94 6 Playback/Deleting/Editin g You can delete all the images and sounds at once. 1 Press the i button twice in Playback mode. The Delete All screen appea rs. 2 Use the four-way controller ( 2 ) to select [All data deleted]. 3 Press the OK button. All the images and sounds are del eted.
95 6 Playback/Deleting/Editin g You can protect imag es and sounds from being accidentally deleted. 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [Protect ]. 3 Press the four-way controller ( 5 ).
96 6 Playback/Deleting/Editin g You can protect al l the images and sounds. 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [Protec t]. 3 Press the four-way contr oller ( 5 ). The Protect scre en appears.
97 6 Playback/Deleting/Editin g Viewing Images on a TV By using th e AV cable , you can captu re and pla y back image s on a TV or other equipme nt with a video IN jack. Make sure that both the TV and the camera are turned off before connecting the cable.
98 6 Playback/Deleting/Editin g You can use the remote con trol unit to view the next image or the previous image while watching the images o n a TV. 1 Press the shutte r release button on the remote cont rol unit. The image fol lowing the current image is played.
99 6 Playback/Deleting/Editin g Setting the Printing Service (DPOF) You can print the images on the SD Memory Card or the built-in memory using a DPOF (Digital Print Ord er Format) compatible printer or at a printing service. Set the following items for each image.
100 6 Playback/Deleting/Editin g 5 Use the four-way controller ( 45 ) to choose the number of copie s, then press the fo ur-way controller ( 3 ). The frame move s to [Date]. 6 Use the four-way controller ( 45 ) to choose whe ther to inse rt the date or not.
101 6 Playback/Deleting/Editin g 1 Press the MENU button in Playback mode. The [ Q Playback] menu appears. 2 Use the four-way controller ( 23 ) to select [D POF]. 3 Press the four-way contr oller ( 5 ). The DPOF screen appears. 4 Press the DISPLAY button.
102 6 Playback/Deleting/Editin g Direct Printing Using PictBridge By connecting the camera to a printer that supports PictBridge using the USB cable (I-USB7) supplied with the camera , you can print imag es directly from the camera without using a PC.
103 6 Playback/Deleting/Editin g 1 Use the four-way controller ( 23 ) to select [Print One] . 2 Press the OK button. The Print One screen appears. 3 Use the four-way controller ( 45 ) to choose the imag e to print. 4 Use the four-way controller ( 23 ) to choose the number of cop ies.
104 6 Playback/Deleting/Editin g 1 Use the four-way controller ( 23 ) to select [Print All]. 2 Press the OK button. The Print All screen appears . 3 Use the four-way controller ( 23 ) to choose the number of cop ies. The number of copies yo u choose applies t o all the images.
105 6 Playback/Deleting/Editin g Disconnect the came ra from the printer when yo u have finished printi ng. 1 Turn the camera off. 2 Disconnec t the USB cable from the camera . 3 Disconnect the USB c able from the printer. Disconnecting the Camera from the Printer e_kb376.
106 6 Playback/Deleting/Editin g Editing Images By changing the size and quality of a selected image, you can make the file smaller than the orig inal.
107 6 Playback/Deleting/Editin g 6 Use the four-way controller ( 45 ) to change the record ed pixels . 7 Press the four-way contr oller ( 3 ). The frame move s to [Quality Level]. 8 Use the four-way controller ( 45 ) to chan ge the qu ality. 9 Press the OK button.
108 6 Playback/Deleting/Editin g The digital filters consist of e ight colo r filters (black-and-wh ite, sepia, red, green, blue, black-and-white + red , black-and-white + green, black-an d- white + blue), a soft filter, five illus tration filters and two sp ecial effect filters.
109 6 Playback/Deleting/Editin g 5 Use the four-way controller ( 23 ) to choose a digital filter. The filter effect is creat ed and the image appears on the LCD moni tor. The example shows an image with illustrati on filter 1 effect. 6 Press the OK button.
110 6 Playback/Deleting/Editin g Copying Files You can copy image and sound files from the built-i n memory to the SD Memory Card and vice versa. This fun ction can only be sele cted when a card has been inserted in the camera. When files are copi ed from the built-in memory to the SD Memory Card, all the files are copie d at once.
111 6 Playback/Deleting/Editin g 4 Use the four-way controller ( 23 ) to select [ 5 ] and press the OK button. All the files are copi ed to the SD Memory Card. 4 Use the four-way controller ( 23 ) to select [ 5 ] and press the OK button. 5 Use the four-way controller ( 45 ) to select the file to copy.
112 7 Settings Settings Camera Settings Formatting will delete all the data on the SD Memory Card if you are using a card, and all the data i n the built-in memory if there is no card inserted. 1 Select [Format] on the [ B Set-up] menu. 2 Press the four-way contr oller ( 5 ).
113 7 Settings You can adjust th e playback volume and the volume of operation sounds, such as the start-u p sound , shutter sound and key operation sound. You can also change the type of sound. 1 Select [Sound] on the [ B Set-up] menu. Choosing [00] turns the volume of f.
114 7 Settings You can change the initial date a nd time setting s. You can al so set the style in which the date appears on the camera. Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd]. 1 Select [Date Adjust] on the [ B Set- up] menu. 2 Press the four-way contr oller ( 5 ).
115 7 Settings 3 Use the four-way controller ( 45 ) to select O or P . O : The ti me in the city selected in World T ime is displa yed. P : The ti me in the city selected i n Home Tim e is displaye d.
116 7 Settings 1 Select [Screen Setting] on the [ B Set-up] menu. 2 Press the four-way contr oller ( 5 ). The Screen Setting screen appears. You can display an i mage recorded with the camera as the w elcome screen when the camera is turned on. 3 Use the four-way controller ( 23 ) to select [Start-u p Screen].
117 7 Settings 8 Press the OK button. The camera is ready to take or play back imag es. You can choose the background design and color of the LCD monitor. 3 Use the four-way controller ( 23 ) to select [Background Color]. 4 Use the four-way controller ( 45 ) to choose the backgro und color.
118 7 Settings You can change the lan guage in which the menus, error messages, e tc. are display ed. You can choose from Eng lish, French, German, Spani sh, Italian, Russian, Korean, Chin ese (traditional and simplified) and Ja panese. 1 Select [Lan guage/ ] on the [ B Set-up ] menu.
119 7 Settings You can choose the output format (NTSC or PAL) for taking or playing back images on a TV. 1 Select [Video Out] on the [ B Set-up] menu. 2 Use the four-way controller ( 45 ) to select [N TSC] or [PAL]. Choose the video output fo rmat to match the output format of the TV.
120 7 Settings You can change the USB connection mode d epending on whethe r the USB cable is to be connected to a printer (PictBridge) or a computer. 1 Select [USB Connection] o n the [ B Set -up] menu. 2 Press the four-way contr oller ( 5 ). The USB connection mod e selection screen appears.
121 7 Settings You can set the camera to turn off automatically when no operation is performed for a fixed time. 1 Select [Auto Power Off] on the [ B Set-up] menu. 2 Use the four-way controller ( 45 ) to select [2 min] , [3 min], [5 min] or [Off]. 3 Press the OK button.
122 7 Settings You can choose the functi ons you use most frequently from th ose listed in the [ A Rec. Mode] menu an d register them on the four-way contro ller. The functions can then be retri ev ed in Capture mo de by pressing the 0 button to display the Function Mode screen, enabling you to change the setting using the four -way controller.
123 7 Settings 1 Align the mode dial with one of the following; d , R , + , . , H , = . 2 Press the 0 button in Capture mode. The functions regist ered on the four-way controller ( 2345 ) appear. 3 Use the four-way controller ( 2345 ) to choose the registered function and change the s etting.
124 8 Appendix Appendix List of City Codes Refer to the followi ng list of city codes when setting the World Time. TYO Tokyo JNB Johannes burg GUM Guam IST Istanbul SYD Sydney CAI Cairo NOU Noumea JRS.
125 8 Appendix Optional Accessories A number of dedicated accessories are availa ble for this came ra. AC adapter D-AC5 USB cable I-USB7 ( ∗ ) AV cable I-AVC7 ( ∗ ) Camera case O-CC16 Strap O-ST20.
126 8 Appendix Messages Messages such as the foll owing may appear on the LCD monito r during camera operation. Compression error Co mpression of the imag e you captu red has fai led. Chang e the quality/ size and tr y again. No i mage & sound There are n o image/soun d files on th e SD Memory Card or in the built-i n memory.
127 8 Appendix Messages such as the follow ing may appear on the LCD monitor when using the PictBridge function. No paper in a pri nter There is no p aper in the pri nter. No ink in a pr inter There is no ink i n the printe r. Printer err or An error message ha s been sent fro m the print er.
128 8 Appendix Troubleshooting Problem Cause Remedy Camera will not turn on Batteries a re not installed Check ba tteries are installed .If not, i nstall batteries . Batterie s are insta lled incorrectly Check orient ation of batte ries. Reinsert ba tteries accor ding to the +- symbols on the batte ry compartment .
129 8 Appendix Subject is not in focus Subject dif ficult to fo cus on Subjects d ifficult to focus on u sing autofocus: object s with litt le contr ast (blue sky, white wa lls, etc.), da rk objects , finely patterned objects, fast-moving objects, scenery th rough win dow or ne t, etc.
130 8 Appendix Main Specifications Image Storage Capacity (when using the built-in memory (11MB)) Type Fully automatic compact digital still camera with built-in zoom lens Effective Pixels 5.
131 8 Appendix Playb ack Function s Single-frame, 9-frame index, movie playback, still image playback (with voice memo or zoom playback), rotating (only still images) Slideshow playback, resizing, protect, digital filter and copy (built-in memory Q media) functions are on the menu.
132 8 Appendix WARRANTY POLICY All PENTAX cameras purchased through authorized bona f ide photographic distribution channels are guaranteed against de fects of material or workmanship for a period of twelve months from date of purchase.
133 8 Appendix • T his warranty policy does not affect the customer’s statut ory rights. • The lo cal warranty policies available from PENT AX distributors in some countries can supersede this warranty poli cy.
134 8 Appendix For customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is sub ject to the following two conditi ons: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity According to 47CFR, Parts 2 and 15 for Class B Personal Comp uters and Peripherals We: Pentax Imaging Company A Division of PENTAX of Americ a, Inc.
• Printed on recycl ed paper • Specific ations and ext ernal dimen sions are subj ect to change without notice . 57418 Copyright © PENTAX Cor poration 2004 01-200408 Pr inted in the Philippine s PENTAX Corporation 2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.
デバイスPentax Optio S50の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pentax Optio S50をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPentax Optio S50の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pentax Optio S50の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pentax Optio S50で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pentax Optio S50を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPentax Optio S50の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pentax Optio S50に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPentax Optio S50デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。