AT&Tメーカー959の使用説明書/サービス説明書
ページ先へ移動 of 50
Please also read P art 1 — Impor tant Product Inf ormation USER ’ S MANUAL Pa r t 2 © 2004 Advanced American T elephones. All Rights Reserved. A T&T and the Globe Design are trademarks of A T&T Corp., licensed to Advanced American T elephones.
PRODUCT O VER VIEW ..............1 BEFORE Y OU BEGIN ...................2 Parts List ................................................2 About Caller Identification (Caller ID) .........................................3 About Call Histor y .............
This A T&T Speakerphone with Caller ID with Call W aiting 959 can be used flat on a table or desk or mounted on a wall and does not requir e A C pow er for operation.
P arts List Y our box should include: Also Needed Y ou will also need the following to install y our phone: • Four AA batteries. 2 BEFORE Y OU BEGIN BEFORE Y OU BEGIN BEFORE Y OU BEGIN Please also read Part 1 — Important Product Information USER’ S MANUAL Part 2 © 2004 Advanced American Telephones.
About Caller Identification (Caller ID) This product has a Caller ID with Call W aiting feature that w orks with ser vice fr om your local phone service pro vider . Caller ID with Call W aiting lets you see who’ s calling before y ou answ er the phone, ev en when you’ re on another call.
Batter y Installation Befor e using the telephone, you should install f our AA batteries (purchased separately). Y ou can use the phone without the batteries to dial and receiv e calls using the handset, but four AA batteries are r equired to po wer the displa y scr een, speakerphone and Caller ID f eatures.
5 INST ALLA TION INST ALLA TION T able/Desk Installation 1 Reposition the base wedg e for table/desk use. Press on the base w edge as shown in figur e a to r emov e the wedge. T urn the wedge so that the larger end is towar d the top of the telephone.
T able/Desk Installation continued from page 5 4 Connect the handset to the telephone. Plug the coiled handset cord into the handset jack on the left side of the phone. Plug the other end of the coiled cord into the handset, then hang up. 5 Check for dial tone.
7 INST ALLA TION INST ALLA TION W all Installation 1 Reposition the base wedg e for wall use. Press on the base w edge as shown in figur e a to r emov e the wedge.
W all Installation continued from page 7 3 Re verse the handset tab . This tab holds the handset when you hang up . Hold down the switchhook, and slide the tab up and out of its slot. T urn the tab so that the end with the “hook” is up. Then inser t the tab back into its slot.
Data P or t If you want to connect another de vice (such as a modem or fax machine) to the wall jack, you can use the jack on the phone labeled D A T A.
10 FEA TURE SETUP FEA TURE SETUP NO TE: Y ou can exit feature setup at any time b y pressing C or b y lifting the handset when there is no incoming call. The order features appear in the menu changes after initial setup . For complete feature setup, see “Set Remaining Features” on page 14.
11 FEA TURE SETUP FEA TURE SETUP Set Home Area Code Y ou must program y our ar ea code, so your phone can pr operly recognize and dial calls. IF FOR CALLS WITHIN Y OUR AREA CODE Y OU DIAL: ENTER IN ST.
12 FEA TURE SETUP FEA TURE SETUP Set Local Area Code Y ou can program up to four Local Area Codes. CALLS OUTSIDE Y OUR AREA IF FOR: Y OU DIAL: ENTER IN STEP 2: All calls outside 11 digits No Local you.
13 FEA TURE SETUP FEA TURE SETUP Set Time and Date 1 Press and r elease O until the scr een displa ys: 2 Use the k eypad to change the blinking digit. Use CALL LIST + or C ALL LIST - to move to the next digit.
14 FEA TURE SETUP FEA TURE SETUP Set Remaining F eatur es Y ou can customize how the featur es of this product w ork. 1 Press and r elease O until the scr een displa ys the featur e y ou want to set. 2 Press CALL LIST + or C ALL LIST - until the screen displa ys your selected setting.
15 FEA TURE SETUP FEA TURE SETUP Default settings indicated by *. FEA TURE/OPTIONS: CHOICE: CALL HIST OR Y Choose which incoming calls are displa yed. ALL CALLS * The phone stores all calls r eceiv ed. NO CALLS The phone does not store call history. REPEA T CALLS Choose how new calls fr om the same number ar e displa y ed.
16 TELEPHONE OPERA TION TELEPHONE OPERA TION Mak e a Call 1 Lift the handset, then dial the number . — OR — Press K , then dial the number . 2 T o end the call, hang up — OR — Press K again. Answ er a Call Lift the handset — OR — Press K .
17 TELEPHONE OPERA TION TELEPHONE OPERA TION M M M M M Redial The last number called fr om this phone (up to 32 digits), is stored in r edial memory. 1 Lift the handset — OR — Press K .
18 TELEPHONE OPERA TION TELEPHONE OPERA TION Mute Press M to pre vent the other party from hearing y ou (you will still be able to hear the other party). Press M again to return to tw o-wa y conversation. Ringer V olume Use the RINGER switch on the side of the base to adjust the ringer volume to OFF , LO W or HIGH .
19 TELEPHONE OPERA TION TELEPHONE OPERA TION Displa y Screen Icons SCREEN DISPLA Y: INDICA TES: There is an er ror in the Caller ID information. This phone or another phone on the same line is in use. The screen also displa ys LINE IN USE . NEW The Caller ID information displa yed is unrevi ewed.
20 ONE T OUCH OPERA TION ONE T OUCH OPERA TION This telephone has 14 One T ouch locations wher e you can stor e phone numbers y ou want to dial using only one or tw o k eys. Y ou can stor e up to 24 digits in each location. The first sev en locations can be accessed using the One T ouch buttons.
21 ONE T OUCH OPERA TION ONE T OUCH OPERA TION Stor e a Number in a One T ouch Location 1 Press G . The screen displa ys ENTER NUMBER . 2 Dial the telephone number y ou want to store (up to 24 digits) —OR— Press R to store the last number dialed.
22 ONE T OUCH OPERA TION ONE T OUCH OPERA TION Re vie w a One T ouch Entr y 1 Press the One T ouch button for the entr y y ou want to re view —OR— Press W , then press the One T ouch button for the entry you want to re view . 2 Press G to return to the idle scr een.
23 DIRECT OR Y OPERA TION DIRECT OR Y OPERA TION This telephone has a directory where y ou can store up to 25 additional telephone numbers and names. Numbers can be up to 24 digits long and names can be up to 15 characters. Directory entries are stor ed in alphabetical order .
24 DIRECT OR Y OPERA TION DIRECT OR Y OPERA TION Stor e Numbers and Names in the Dir ector y 1 Press d , then O . The screen displa ys ENTER NUMBER . 2 Dial the telephone number y ou want to store (up to 24 digits) — OR — Press R to store the last number dialed.
25 DIRECT OR Y OPERA TION DIRECT OR Y OPERA TION Stor e a Call Histor y Number in the Dir ector y 1 Press CALL LIST + or C ALL LIST - to scroll thr ough the call histor y. 2 Press d to store displa yed call information in the telephone dir ector y . The screen displa ys STORED .
Dial a Dir ector y Number 1 Follow the dir ections in “View Dir ectory Numbers” on page 25 to find the number y ou want to call. 2 When the number y ou want is displa y ed, press D to make the call. The speak erphone is activated. — OR — Lift the handset, then press D to mak e the call.
27 CALLER ID OPERA TION CALLER ID OPERA TION If you subscribe to Caller ID service with your local phone service provider , this phone stores all incoming calls with valid Caller ID inf ormation in the call histor y. Name, number , time and date can all be stored, if they are sent with the call.
28 CALLER ID OPERA TION CALLER ID OPERA TION Set Scr een Displa y Options Y ou can customize how the Caller ID featur es of this product w ork. See “Set Remaining Featur es” on page 14 for instructions. For options, see Call Histor y, Repeat Calls, and Call List Order in the “Featur e Summar y” on page 15.
29 CALLER ID OPERA TION CALLER ID OPERA TION Displa y Dial While you ar e r evie wing the call histor y, you can dial a number displa yed on the screen. 1 Lift the handset — OR — Skip to Step 2 to use the speak erphone. 2 Press CALL LIST + or C ALL LIST - until the number y ou want to dial is displa y ed.
30 CALLER ID OPERA TION CALLER ID OPERA TION Displa y Screen Messa ges SCREEN DISPLA YS: WHEN: PRIVATE NAME The other party is blocking name information. PPP The other party is blocking number information. PRIVATE CALLER The other party is blocking name and number information.
31 DEF A UL T SETTINGS DEF A UL T SETTINGS FUNCTION: DEF A UL T SETTING: Languag e ENGLISH Contrast 2 Clock 12:00AM 1-01 Call Histor y ALL CALLS Repeat Calls Combined Call List Order BY TIME CID-Call .
32 GENERAL PR ODUCT CARE GENERAL PR ODUCT CARE GENERAL PRODUCT CARE T o k eep your phone w orking and looking good, follow these guidelines: • Av oid putting it near heating appliances and de vices that generate electrical noise (for example, motors or fluorescent lamps).
33 TECHNICAL SPECIFICA TIONS TECHNICAL SPECIFICA TIONS TECHNICAL SPECIFICA TIONS REN 1.0B Batter y 4 AA Product W eight (unpack ed) 1.87 pounds Product 8.
34 IN CASE OF DIFFICUL TY IN CASE OF DIFFICUL TY If you ha ve difficulty operating this phone, tr y the suggestions below . For Customer Service , visit our website at www .telephones.att.com or call 1 800 222–3111 . Ha ve the serial n umber , found on the underside of your phone, a vailable when contacting Customer Ser vice.
35 IN CASE OF DIFFICUL TY IN CASE OF DIFFICUL TY TELEPHONE DIRECT OR Y PROBLEM SOLUTION Difficulty Storing • Mak e sure y ou ar e pressing the cor rect Numbers in Memor y sequence of buttons for storing numbers.
B Base unit 2 base wedge 5, 7 batteries 2, 4, 10, 35 batter y 33 batter y compartment 4 C call histor y 3, 15, 21, 25, 27–29 CALL HISTORY 15 call information 3 CALL LIST ORDER 15 call recor d 28 Cal.
loud buzzing noise 35 W 20, 21, 22 M modem 9 M 18 MUTE light 19 N NEW 27 No Caller ID Information While Call W aiting 35 No Dial T one 34 NO NAME FOUND 30 NO NUMBER 29, 30 O One T ouch buttons 20–22.
© 2004 Advanced Amer ican T elephones. All Rights Reser ved. A T&T and the Globe Design are trademar ks of A T&T Corp., licensed to Advanced American T elephones. Printed in China. Issue 1A T&T 06/04 In case of difficulty , visit our Ser vice Center at www .
1 This Quick Start Guide pro vides basic instructions. F or additional installation options and complete instructions which allo w y ou to use all featur es of this phone, ref er to your Speak erphone with Caller ID with Call W aiting 959 User's Man ual, Part 2.
2 Batter y Installation continued from page 1 1. Press do wn on the batter y compar tment tabs as sho wn and pull to open the batter y co ver . 2. Insert four new AA batteries (purchased separatel y) follo wing the polarity markings in the batter y compartment.
2 Connect the long telephone line cord to the jack labeled TEL on the back of the phone. 3 Connect the line cord to a modular wall jack. 4 Connect the handset to the telephone. Plug the coiled handset cord into the handset jack on the left side of the phone.
4 FEA TURE SETUP NO TE: Y ou can exit feature setup at any time b y pressing C or b y lifting the handset when there is no incoming call. The order features appear in the menu changes after initial setup. For complete feature setup , see “Set Remaining Features” on page 14 of your User’ s Manual, Par t 2.
5 Set Home Area Code Y ou must program y our ar ea code, so your phone can pr operly recognize and dial calls. IF FOR CALLS WITHIN Y OUR AREA CODE Y OU DIAL: ENTER IN STEP 2: 7 digits Y our area code .
6 Set Local Area Code Y ou can program up to four Local Area Codes. CALLS OUTSIDE Y OUR AREA IF FOR: Y OU DIAL: ENTER IN STEP 2: All calls outside 11 digits No Local your ar ea code (1+ area code+ Are.
Set Time and Date 1 Press and r elease O until the scr een displa ys: 2 Use the k eypad to change the blinking digit. Use CALL LIST + or C ALL LIST - to move to the next digit. Use # to toggle between AM and PM . 3 When the corr ect date and time are sho wn, press O to sa ve the ne w setting and mov e to the next option.
8 TELEPHONE OPERA TION Mak e a Call 1 Lift the handset, then dial the number . — OR — Press K , then dial the number . 2 T o end the call, hang up — OR — Press K again.
9.
© 2004 Advanced Amer ican T elephones. All Rights Reser ved. A T&T and the Globe Design are trademar ks of A T&T Corp., licensed to Advanced American T elephones. Printed in China. Issue 1A T&T 06/04 In case of difficulty , visit our Ser vice Center at www .
デバイスAT&T 959の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
AT&T 959をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAT&T 959の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AT&T 959の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AT&T 959で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AT&T 959を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAT&T 959の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AT&T 959に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAT&T 959デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
