AT&TメーカーE2115の使用説明書/サービス説明書
ページ先へ移動 of 27
User Manual (P ar t 2) 2.4 GHz Cor dless T elephone E2115 with Caller ID & Call W aiting 91-5622-20-00_E2115 CIB_R2.qxd 4/13/2004 10:26 AM Page 1.
Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. STOP! See page 7 for easy instructions. You must install and charge batteries before using the telephone.
1 T ab le of contents Getting Started Quick reference guide ........................2 Parts checklist .......................................4 Before you begin ..................................5 Telephone base installation................6 Battery installation & charging .
2 Getting Started Off/Clear During a call, press to hang up. While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display. Quick r eference guide Mute/Delete Press to mute microphone (see page 10). While reviewing call log, press and hold to clear Caller ID log (see page 20).
3 Getting Started Quick r eference guide T elephone Base IN USE On when handset is in use. Flashes when another phone is in use on the same line. CHARGING On when handset batteries are charging. NEW MESSAGE Flashes when you have new voice mail (requires voice mail service from your local telephone company).
4 Getting Started P ar ts checklist Remember to save your sales receipt and original packaging in case you ever need to ship your telephone for warranty service.
5 Getting Started Befor e y ou begin About Caller Identification Caller ID with Call Waiting features in this telephone let you see who’s calling before you answer the phone, even when you’re on another call. These features require services provided by your local telephone company.
NOTE: Use only the power cord supplied with this product. If you need a replacement, call 1-800-222–3111. Be sure to use an electrical outlet not controlled by a wall switch. 6 Getting Started T elephone base installation Install the telephone base as shown below.
7 Getting Started Batter y installation & charging After installation, place the handset in the base and allow to charge for 15 hours before use. You can keep batteries charged by returning the handset to the base after each use. When batteries are fully depleted, a recharge takes about 10 hours.
8 Getting Started W all mounting The telephone base can be installed on any standard wall-phone outlet as shown below. Choose a location away from electronic equipment, such as personal computers, television sets or microwave ovens. Avoid excessive heat, cold, dust or moisture.
9 Getting Started Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset.
10 Telephone Operation Basic operation Making and answering calls To answer an incoming call, press PHONE (or SPEAKER, or any dial pad key). To make a call, press PHONE or SPEAKER , then dial a number. Press OFF to hang up. To preview numbers before dialing, enter numbers first, then press PHONE or SPEAKER to dial.
11 Telephone Operation Options while on calls Volume control Press VOLUME buttons on the side of the handset to adjust listening volume. Each button press raises or lowers volume by one level. When you change the volume level, the new setting becomes the default.
12 Telephone Operation Handset locator If you misplace the handset, press HANDSET LOCATOR at the base. The handset will beep for 60 seconds to help you locate it. To stop the beeping, press PHONE, SPEAKER, or any dial pad button at the handset, or press HANDSET LOCATOR at the base.
13 Telephone Operation Handset settings At the feature menu you can change settings to customize how the telephone works. Press MENU , then use the ^V buttons to scroll to the feature you want to change. As you scroll through the menu, the top menu item is always highlighted with a > character.
14 Telephone Operation Handset settings Handset name At this menu you can customize the name that appears on the handset screen when the phone is idle. Press DELETE to erase letters, then replace them with a name of your preference, up to 16 characters long (see page 16 to enter letters).
15 Phonebook Memory capacity The phonebook directory can store up to 50 entries. Each entry can contain a number up to 32 digits, and a name up to 16 letters long.
16 Phonebook New phonebook entries To create a new phonebook entry Press MENU twice to select DIRECTORY . Press V to highlight STORE . Press SELECT , then enter the telephone number when prompted. Use the dial pad to enter up to 32 digits, then press SELECT.
17 Phonebook Phonebook sear ch Press DIR to display the first listing in the phonebook. You can then use the up/down arrows to browse through the phonebook, or search to find a specific entry. Press OFF at any time to exit the directory. To browse through the directory To browse, press ^ or V to scroll through all entries one by one.
18 Phonebook T o dial, chang e or delete entries To dial a number When any phonebook entry is displayed, press PHONE (or SPEAKER ) to dial the displayed number. To delete an entry When any phonebook entry is displayed, press DELETE to delete the displayed entry from the phonebook.
19 Caller ID Logs How Caller ID works If you subscribe to Caller ID service provided by your local phone company, information about each caller will be displayed after the first ring. Information about the last 50 incoming calls is stored in your call log.
20 Caller ID Logs T o r evie w y our call log To review your call log Press CID to review your call log. The most recent call is displayed first. Use the arrow buttons to scroll through the list as shown at left. To return a call Press PHONE (or SPEAKER ) to call the number as displayed.
21 Appendix Scr een icons, indicator lights & tones Handset screen icons & alert tones Speakerphone in use. Ringer off. Battery charging (animated display). Low battery (flashing); place handset in base to recharge. MUTE Microphone is muted. NEW New calls (press CID to review call log).
22 Appendix In case of difficulty If you have difficulty with your phone, please try the suggestions below. For Customer Service, visit our web site at www.telephones.att.com , or call 1-800-222–3111. Telephone does not work at all • Make sure batteries are installed and charged correctly (see page 7).
23 Appendix T echnical specifications RF Frequency Band (Handset to Base) 2401.056 MHz — 2482.272 MHz Output Power 20 dBm Sensitivity -96 dBm Modulation GFSK RF Frequency Band (Base to Handset) 2401.
24 Appendix A AC adapter, 6, 8 Alert tones, 21 Answering calls, 10 B Battery charging, 7 Battery installation, 7 Belt clip, 9 C Call logs, 19 Caller ID, 19 add entries to phone directory, 20 delete en.
Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 04/04. 91-5622-20-00 www .telephones.att.
デバイスAT&T E2115の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
AT&T E2115をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAT&T E2115の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AT&T E2115の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AT&T E2115で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AT&T E2115を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAT&T E2115の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AT&T E2115に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAT&T E2115デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
