Atlantis LandメーカーA02-F48-4Gの使用説明書/サービス説明書
ページ先へ移動 of 32
50-Port Dual Web Rack Switch A02-F48-4G USER’S MANUAL A02-F48-4G_ME01.
.
50-Port Dual Web Rack Switch Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other nam es mentioned mat be trademarks or registered tradem arks of their respective owners. S ubject to change without notice. No liability for technical errors and/or omissions.
50-Port Dual Web Rack Switch ii TABLE OF CONTENTS CHAPTER 1 ............................................... 1 1.1 A BOUT T HIS G UIDE .....................................................................................................................
50-Port Dual Web Rack Switch iii Reset Settings ................................................................................................................. ................ 23 Logout ..............................................................
.
50-Port Dual Web Rack Switch 1 Chapter 1 Introduction 1.1 About This Guide Congratulations on your purchase of the 48+4G-Port 10/100/1000Mbps Gigabit Ethernet Web Sm art Switch. This device integrates 1000Mbps Gigabit Ethernet, 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package.
50-Port Dual Web Rack Switch 2 internetworking technologies. And with expected advances in the coming years in silicon technology and digital signal processing that will enable Gigab it Ethernet to ev.
50-Port Dual Web Rack Switch 3 QoS QoS gives you full control over which types of outgoi ng data traffic should be given priority by the Switch, ensuring important data like gaming packets m ove through the Switch at lightning speed, even under heavy load.
50-Port Dual Web Rack Switch 4 Chapter 2 Installation This chapter provides unpacking and in stallation inform ation for the Switch. 2.1 Package Contents Open the shipping cartons of the Switch and carefu lly unpacks its contents.
50-Port Dual Web Rack Switch 5 Combine the Switch with the provided screws Then, use screws provided with the equipmen t rack to m ount each switch in the rack.
50-Port Dual Web Rack Switch 6 2.5 AC Power The Switch used the AC power supply 100-240V AC, 50-60 Hz. The power switch is located at the rear of the unit adjacent to the AC power conn ector and the syst em fan.
50-Port Dual Web Rack Switch 7 The Switch is equipped with two Gigabit twisted pair por ts, supported auto negotiable 10/100/1000Mbps and auto MDI/MDIX crossover detection function. These two ports can operate in half-duplex mode for 10/100Mbps and full- duplex mode for 10/100/1000Mbps.
50-Port Dual Web Rack Switch 8 Led SYSTEM Blinking : When the CPU is working, the System LED is blinking. On/Off : The CPU is not working. Ports 1~48 10/100M Status LEDs Link/ACT: Link/Activity On : When the Link/ACT LED lights on, the resp ective port is successfully connected to an Ethernet network.
50-Port Dual Web Rack Switch 9 Chapter 3 Configuration Through the Web Browser you can configure the Switch such as VLAN, Trunking, QoS… etc. With the attached Web Managem e nt Utility, you can easily discove r all the Web Managem ent Switch, assign the IP Address, changing the pa ssword and upgrading the new firmware.
50-Port Dual Web Rack Switch 10 Discovery List This is the list where you can discover all the Web managem ent devices in the entire network. By pressing the “ Discovery ” button, you can list all the Web Mana gem ent devices in the discovery list.
50-Port Dual Web Rack Switch 11 Monitor List All the Web Smart Device in the Monitor List can be monitored; you can also receive the trap and show the status of the device. System word definitions in the Monitor List: • S: Shows the system symbol of the Web-Smart device, represent for device system is no t alive.
50-Port Dual Web Rack Switch 12 In order to receive Trap information, switch has to be configured with Trap IP and Trap Events in Web browser, which are available in the Trap Setting Menu Add Item: To add a device to the Monitor List manually, enter the IP Address of the device that you want to monitor.
50-Port Dual Web Rack Switch 13 Do NOT upgrade firmware on any At lantis Land product over a wireless connection. Failure of the device may result. Use on ly hard-wired netw ork connections.
50-Port Dual Web Rack Switch 14 Chapter 4 WEB Configuration The 48+4G-Port 10/100/1000Mbps Gigabit Ethernet We b Sm art Switch has a Web GUI interface for smart switch configuration. The Switch can be c onfigured through the Web Browser. A network administrator can manage, control an d monitor the switch f rom the lo cal LAN.
50-Port Dual Web Rack Switch 15 4.2 Setup Menu When the main page appears, find the Setup m enu in the left side of the screen. Click on the setup item that you want to configure.
50-Port Dual Web Rack Switch 16 To change the port setting, click on the ID parameter to enter to the selected por t to configure its Speed/Disable, Flow control and QoS setting. Speed/Disable: This setting has six modes: 100M Full , 100M Half , 10M Fu ll , 10M Half, Auto and Disable .
50-Port Dual Web Rack Switch 17 QoS: In some ports that need to have a high priority to manage the data transfer, QoS should be change. Set the port’s QoS to high to determine the port will always tr ansfer their data first. QoS function can be working in any port e ither from port 1 to port 24 or from port 25 to port 52.
50-Port Dual Web Rack Switch 18 Once you want to modify the VLAN Group, check on th e ID parameter, the ID VLAN configuration window will pop out. Group 1 and Group 2 can not be managed at the same time When add a new Vlan, the members of de fault Vlan 1 are removed automatically.
50-Port Dual Web Rack Switch 19 4.3 Maintenence Status Click on the “ Status ” to present the device status on this scree n, it will show the System Status, Port Status, VLAN Status and Trunk Status . Press “ Refresh ” when you need to renew the posted information.
50-Port Dual Web Rack Switch 20 System Settings The System Setting includes the System name, Location na me, Login Timeout, IP Address, Subnet Mask and Gateway. Through the Web Management Utility, you can easily re cognize the dev ice by using the System Name and the Location Name.
50-Port Dual Web Rack Switch 21 TRAP The Trap Setting enables the device to m onitor the Trap through the Web Mana gement Utility, se t the Trap IP Address of the manage r where the trap to be sent. System Events : Monitoring the system’s trap. • Device Bootup: a trap when booting up the system.
50-Port Dual Web Rack Switch 22 • Abnormal* Transmit Error: a trap when there are transm it data error in copper port. • Abnormal*: 50 error packet count within 10 seconds.
50-Port Dual Web Rack Switch 23 Reset Settings The Factory Reset button helps you to reset the device back to the defa ult setting from the factory. Be aware that the entire configuration will be rese t, th e IP address of the device will be set to default setting 192.
50-Port Dual Web Rack Switch 24 APPENDIX A RJ-45 Pin Specification The following diagram and tables show the standa rd RJ-45 receptacle/connector and their pin RJ-45 Connector pin assignment Contact M.
50-Port Dual Web Rack Switch 25 APPENDIX B Technical Specifications Standard IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.
50-Port Dual Web Rack Switch 26 APPENDIX C Support If you have any problems with theSwitch , please consult this m anual. If you continue to have problems you should contact the dealer where you bought this Switch.
デバイスAtlantis Land A02-F48-4Gの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Atlantis Land A02-F48-4Gをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAtlantis Land A02-F48-4Gの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Atlantis Land A02-F48-4Gの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Atlantis Land A02-F48-4Gで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Atlantis Land A02-F48-4Gを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAtlantis Land A02-F48-4Gの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Atlantis Land A02-F48-4Gに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAtlantis Land A02-F48-4Gデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。