PictureTelメーカー2の使用説明書/サービス説明書
ページ先へ移動 of 18
Upgrading fr om LiveLAN 2.0 to 3.1 Overview This guide shows how to upgrade your PC to PictureTel ® LiveLAN™ 3.1 from a previous version of LiveLAN. It assumes you know how to install a PC add-on board, connect a PC to peripher al equipment, and use Microsoft ® Windows ® 95 applications.
Upgrade Summary Review this summ ary of upgrade steps before proceedin g. They provide an overvi ew of the upgrade path you need to follow for each scenario.
Category Requirement Processor A Pentium, Pentium Pro, or Pentium II sin gle processor or equivalent running at 133-MHz or faster. PCI Slot One available P CI bus slot for the P ictureTel LiveLA N Media Accelerator Boa rd. Hard Disk Space 30 MB of available ha rd disk space for inst allation.
For power requirements for the LiveLAN 3.1 Media Acc elerator board, ref er to Appendix B of the PictureTel LiveLAN 3.1 Installation Guide . Replacing the TCP/IP Stack LiveLAN 3.1 runs on any WinSock 1.1-compliant stack that supports Microsoft-specific ex tensions.
3. Click the Configuration tab. The following screen is displa y ed..
4. Double-click the TCP/IP Stack. FTP Software, Inc. protocol entry. The TCP/ I P Stack. FTP Software, Inc. Properties screen that is displa ye d. 5. Record the following information: o IP Address o Subnet Mask o Router(s) 6.
7. Click the Name Configuration tab on the TCP/IP Stack. FTP Software, Inc. Properties screen. The following screen is displayed. 8. Record the following information: o Host Name o Domain Name o Name Server Address(es ) 9. Click the Cancel button to return to the Network dialog box .
Removing the FTP TCP /IP Stack Follow these instructions to remove the FTP Software OnNet (V1.2, 2.0, o r 2.1) TCP/IP stack: 1. Remove the FTP TCP/IP stack by selecting (highlighting) the TCP/IP Stack. FTP Software, Inc. entry on the Configuration tab of the Network Control Panel Window, and click t he Remove button.
4. Click No. You must edit the autoexec.bat and win.ini files, and rename the winsock.dll file in y our OnNet director y before you restart your system. The procedures for editing and renamin g these files are provided below. Editing th e autoexec.bat and win.
Editing the win.ini File 1. To edit the win.ini file, click its Title Bar. The file’s window is highlighted when it is selected. You may or m ay not have to edit this f ile. I f the following load statement exists in y our win.ini file, then y o u will have to edit the file : load=c:mousexpoint.
If you don’t have this file, you will receive an erro r. Click OK in the Error Dialog box window and proceed to Renaming th e winsock.dll File . You may o r may not have to edit this f ile. If the following line exists in your winfile.ini file, the n y o u will have to edit the file: keyview=c:pctcpkeyviewkvfm.
Renaming t he winsock.dll F ile 1. Using the Windows 95 Explorer, go to the OnNet 2.0 director y (for example c:pctcp ). Click the Star t button and choose Programs -> Windows Ex plorer. 2. Rename the winsock.dll file so that your applications will use the Microsoft winsock.
7. Click OK. 8. In the Network Configuration window, double-cli ck TCP/IP protocol. 9. Click the IP Address tab. Check the Specif y an I P address option and enter the local PC’s IP address and subn.
2. Double-click the Network icon to display the Network Control Panel window. 3. Click the Add... button. 4. In the Select Network Component Type window, select Client as the networ k component type. 5. Click the Add... button. 6. In the Select Network Client window, select FTP Software, Inc.
4. Open each categor y one at a time and remove all references to MovieMan. Double click on each selection and click the Remove button. 5. Click OK. 6. Click the Start button and choose Run... 7. Type system.ini in the tex t entry field of the Run dialog box and click the OK button.
12. Remove the following lines from the [ drivers.desc ] section of the control.ini file: moviecl.drv=[MCI] MovieMan Control-L Driver V1.1 moviey8.dll=MovieMan YUV8 Codec V1.1 moviev0.drv=MovieMan Video Capture Driver V1.1 moviea0.drv=MovieMan Audio Driver V1.
Caution Electrical current from p ower, telephone, and si gnal cables is potentially hazardous. When installing, moving, or opening your computer, disconnect signal cables in accordance with national and local laws. To prevent el ectrostatic damage to the board, do not disconnect the power cable from the co mputer.
To connect your Live LAN 2.0 video camera to the L iv eLAN Multimedia Accel erator board: 1. Connect the 8-pin end of the video adapter cabl e into the socket labeled on the LiveLAN Multimedia Accelerator bo ard. The following illustration shows the Live LAN Media Accel erator board's connector plate: 2.
デバイスPictureTel 2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
PictureTel 2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPictureTel 2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。PictureTel 2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。PictureTel 2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
PictureTel 2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPictureTel 2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、PictureTel 2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPictureTel 2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。