PioneerメーカーAVIC-X920BTの使用説明書/サービス説明書
ページ先へ移動 of 228
Operation Manual FLASH MEMORY MUL TIMEDIA A V NA VIGA TION RECEIVER A VIC-Z120BT A VIC-X920BT Notice to all users: This software requires that the navigation system is properly connected to your vehicle ’ s parking brake and depending on your v ehicle, additional installation may be required.
Thank you for buying this P ioneer product. Please read through these operating instruct ions so you will know how to operate your model properly. A fter you have finished read ing the instructions, k eep this man- ual in a safe place for future reference .
– Searching for a city name first 34 – Finding the location by specifying the house number 35 – Searching for a name by entering multiple keywords 36 Setting up a route to your home 36 Searching.
– How to read traffic information on the map 56 – Viewing the traffic flow 57 – Setting an alternative route to avoid traffic congestion 58 – Selecting traffic information to display 59 Browsi.
Reading the screen 83 Using the touch panel keys 84 – Storing and recalling broadcast frequencies 84 Using the “ F unction ” menu 85 – Stores the strongest broadcast frequencies 85 – T unes .
– Searching for a specific scene and starting playback from a specified time 117 Using the “ F unction ” menu 117 Using an iPod (iPod) Starting procedure 118 Reading the screen 118 Using the tou.
Using the demonstration guidance 152 Registering your home 152 Correcting the current location 153 Changing the eco-function setting 153 Displaying the “ Map Settings ” screen 154 Setting the auto.
Available Basic V oice Commands 181 – Basic commands 181 – V oice operation for the iPod 181 – V oice operation for AV source (other than iP od) 182 – V oice commands related to hands-free pho.
Manual overview Before using this product, be sure to read Im- portant Information for the User (a separate manual) which contains warnings, cautions, and other important information that you should note.
“ SD memory card ” The SD memor y card, SDHC memor y card, mi- croSD card and microSDHC card are collec- tively referred to as the “ SD memor y card ” .
Protecting the LCD panel and screen p Do not allow direct sunlight to fall on the LCD screen when this product is not being used. Extended exposure to direct sunlight can result in LCD screen malfunction due to the resulting high temperatures.
Checking part names and functions This chapter gives information about the names of the parts and the main features using the buttons . 7 6 5 4 3 2 1 A VIC -Z120BT (with the LCD panel closed) 9 8 A VI.
6 8 7 9 2 3 4 5 1 A VIC -X920BT 1 button Press the button to activate voice opera- tions. Press and hold the button to switch the AV source to mute. T o cancel the muting, press and hold it again. 2 VOL (+/ – ) button Press to adjust the A V (Audio and Video) source volume.
Adjusting the LCD panel angle p This function is available for AVIC -Z120BT only . WARNING When opening, closing and adjusting the angle of the LCD panel, be careful not to get your fin- gers caught. CAUTION Do not open or close the LCD panel by force.
Ejecting a disc (for A VIC-Z120BT) p This section describes operations for AVIC- Z120BT . 1 Press the h button. The “ Monitor Setup ” screen appears. 2 T ouch [Disc Eject]. The LCD panel opens, and the disc is ejected. 3 Remove the disc, and press the h but- ton.
CAUTION ! Do not press the h button when an SD mem- ory card is not fully inserted. Doing so may da- mage the card. ! Do not press the h button before an SD mem- ory card has been completely removed. Doing so may damage the card. 1 Press the h button.
4 Pull the SD memory card out straight. 5 Press the h button. The LCD panel closes. p If data related to map data, such as custo- mized POI data, is stored on the SD mem- ory card, the navigation system restarts.
When the data related to map data is stored If data related to map data, such as custo- mized POI data, is stored on the SD memor y card, operating procedures are slightly differ- ent. 1 Press the h button and then touch [Eject SD]. 2 T ouch [Y es]. The navigation system restarts, and a message prompting you to remove the SD memor y card appears.
! If data loss or corruption occurs on the sto- rage device for any reason, it is usually not possible to recover the data. Pioneer accepts no liability for damages, costs or expenses arising from data loss or corruption. Connecting your iPod Using the USB inter face cable for iPod en- ables you to connect your iP od to the naviga- tion system.
4 Read the disclaimer carefully , checking its details, and then touch [OK] if you agree to the conditions. The map screen appears. Regular startup % Start the engine to boot up the system. After a short pause, the splash screen comes on for a few seconds.
En 21 Chapter 02 Basic operation Basic operation.
Screen switching overview 2 5 6 1 1 3 4 En 22 Chapter 03 How to use the navigation menu screens.
What you can do on each menu 1 T op Menu P ress the HOME button to display the “ To p Menu ” screen. This is the starting menu to access the desired screens and operate the various functions.
5 Move the icon to the left side of the screen, and then release it. The selected item is added to shortcut. Canceling the shortcut 1 T ouch and hold the icon that you want to cancel the shortcut. 2 Move the icon to the right side of the screen, and then release it.
Most of the information provided by your navigation system can be seen on the map. Y ou need to be- come familiar with how information appears on the map. How to read the map scr een This example shows an example of a 2D map screen . 1 8 9 a b 2 3 4 c e d f 5 7 6 g h p Information with an asterisk (*) appears only when the route is set.
8 Street name (or city name) that your vehi- cle is traveling along = F or details, refer to Setting the curren t street name display on page 156. 9 Extension tab for the AV information bar T ouching this tab opens the AV information bar and enables you to briefly view the current status on the A V source.
Display during freeway driving In certain locations of the freeway, lane infor - mation is available, indicating the recom- mended lane to be in to easily maneuver the next guidance. 1 While driving on the freeway, freeway exit numbers and freeway signs may be displayed when in the vicinity of interchanges and exits.
p The map orientation is fixed at “ North up ” when the map scale is 25 miles (50 kilo- meters) or more. p The map orientation is fixed at “ Heading up ” when the 3D map screen is displayed. 1 Display the map screen. 2 T ouch on the map screen.
Displayed when the map is scrolled. Set the route to the place specified with the cursor . : Registration Register information on the location indicated by the cursor to “ Favorites ” . = For details, refer to Registering a location by scroll mode on page 46.
p This mode is available when [ Camera ]i s set to “ On ” . = For details, refer to Setting for rear view camera on page 164. ! Eco Graph : Displays a graph for eco-driving on the left side of the screen and the map on the right side of the screen.
This navigation system is equipped with an Eco-driving function that can be used to esti- mate whether you are driving in an environ- mentally friendly way . This chapter describes this function. ! The fuel mileage calculated is based on a theoretical value determined from vehicle speed and position information from the navigation system.
! : Ordinary Road A comparison of the past average fuel mileage and the average fuel mileage for 90 seconds in the past, while the ve- hicle is driving on an ordinary road. ! : F reeway A comparison of the past average fuel mileage and the average fuel mileage for 90 seconds in the past, while the ve- hicle is driving on a freeway.
CAUTION For safety reasons, these route-setting functions are not available while your vehicle is in motion. T o enable these functions, you must stop in a safe place and put on the parking brake before setting your route. p Some information regarding traffic regula- tions depends on the time when the route calculation is per formed.
Searching for a location by address The most frequently used function is “ Ad- dress ” , in which the address is specified and the destination is searched.
10 Enter the house number and then touch [OK]. The “ House Number Selection ” screen ap- pears. 11 T ouch the desired house number range. The searched location appears on the map screen. = For the subsequent operations, refer to Set- ting a route to your destination on page 41.
Searching for a name by entering multiple keywords Y ou can search for a name (such as a city name or a street name) by entering multiple keywords. p The maximum character number that can be input is 18 , and you can enter keywords up to 3. p Separate keywords by a space, quotation mark, comma, hyphen, period, or slash.
3 T ouch the desired category . Preset categories The “ POI List ” screen appears. 4 T ouch the POI you want. The searched location appears on the map screen. = For the subsequent operations, refer to Set- ting a route to your destination on page 41.
Searching for POIs around the destination p This function is available when the route is set. 1 Display the “ Destination Menu ” screen. = For details of the operations, refer to Screen switching over view on page 22. 2 T ouch [POI]. The “ POI Search ” screen appears.
Selecting destination from “ Favorites ” Storing locations you visit frequently saves time and effort. Selecting an item from the list provides an easy way to specify the position. p This function is not available if no locations have been registered in “ Favorites ” .
3 T ouch the entry you want. The searched location appears on the map screen. = For the subsequent operations, refer to Set- ting a route to your destination on the next page. Searching for a location by coordinates Entering a latitude and longitude pinpoints the location.
Setting a route to your destination 1 Search for a location. = For details, refer to Chapter 6. After searching for the destination, the Loca- tion confirmation screen appears. 2 T ouch [OK]. Location confirmation screen The destination is set, and then route calcula- tion starts.
Displaying the “ Route Overview ” screen 1 Press the HOME button to display the “ T op Menu ” screen. 2 T ouch [Destination]. The “ Destination Menu ” screen appears. 3 T ouch [Route Overview]. 2 3 1 1 Options = For details, refer to Modifying the route calculation conditions on this page.
Avoid T oll Road This setting controls whether toll roads (in- cluding toll areas) should be taken into ac- count. Off *: Calculates a route that may include toll roads (including toll areas). On : Calculates a route that avoids toll roads (in- cluding toll areas).
Editing waypoints Y ou can edit waypoints (locations you want to visit on the way to your destination) and recal- culate the route so that it passes through these locations. Adding a waypoint Up to 5 waypoints can be set, and waypoints and final destination can be sorted automati- cally or manually .
Sorting waypoints Y ou can sort waypoints and recalculate the route. p Y ou cannot sort waypoints that you have al- ready passed. 1 Display the “ Route Overview ” screen. = For details, refer to Displaying the “ Route Overview ” screen on page 42.
Storing a location in “ Favorites ” Storing your favorite locations as “ Favorites ” provides you with the opportunity to save the time and effort of re-entering this information. Stored items can be made available on “ Fa- vorites ” later .
4 T ouch the item that you want to change the setting. p Up to 17 characters can be input for the name. # T ouch [ Name ]. Y ou can enter the desired name. # T ouch [ Phone# ]. Y ou can edit the registered phone number . T o dial the number , touch [ Call ].
Sorts the items in the list in order by dis- tance from the vehicle position. ! : Sorts the items in the list alphabetically . ! : Sorts the items in the list in order of the re- cently used items. Deleting the entry from the “ Favorites ” list 1 Display the “ Destination Menu ” screen.
5 T ouch [OK]. The “ Favorites ” screen appears. Importing the “ Favorites ” items Y ou can import the locations that you have edi- ted on the utility program AVIC FEEDS which is available separately to “ Favorites ” . p When a location that is already registered in “ Favorites ” is imported, the location is overwritten.
If you have an active subscription to MSN Direct ser vice, you can check and browse various information on your navigation system, such as gas prices, movie times, weather conditions and traffic information. The information will be updated periodically.
Subscribing to the MSN Direct service Within two days of completing the subscription, execute Activating the MSN Direct function . 1 Access the following URL and re ad the description. http://www .msndirect.com/pioneer 2 Be sure to check the coverage area and other availabilities of MSN Direct on the web page.
! Dist. (default): Sorts the items in the list in order by dis- tance from the vehicle position. ! Name : Sorts the items in the list alphabetically . ! Price : Sorts the items in the list by price. # T ouch [ Refresh ]. The information is updated. p [ Refresh ] appears when new gas prices in- formation is received.
4 T ouch [All Movie Titles]. The movie titles now showing are displayed. # T ouch [ Refresh ]. The information is updated. p [ Refresh ] appears when the new informa- tion is received. 5 T ouch the desired movie title. The theaters that are currently showing the se- lected movie are displayed.
Enables you to call the position if a telephone number is available. (P airing with cellular phone featuring Bluetooth wireless technology is re- quired.) Browsing weather information Local weather information can be displayed on a list. Switching the screen allows you to see worldwide weather conditions.
MSN Direct icon The following MSN Direct icons appear in the map screen. ! Gas Prices : Indicates gas stations whose gas prices exceed average prices of all gas stations that are received. : Indicates gas stations whose gas prices equal or go below average prices of all gas stations that are received.
4 Select an incident you want to view in detail. The details of the selected incident are dis- played. p T ouching an incident you want to see allows you to view the detailed information of the incident. If the information cannot be dis- played on one screen, touch or to view the remaining information.
T raffic event icon ! with yellow line: Stop-and-go traffic ! with red line: Stopped traffic ! with black line: Closed/blocked roads ! etc.: Accidents, constructions, etc. p F or meanings of other icons, check them the “ T raffic T ype Settings ” screen.
! Green: average speed in this area is faster than 45 mph (72 km/h) (An icon without a line will be displayed) Setting an alternative route to avoid traffic congestion The navigation system checks at regular inter- vals whether or not there is the traffic informa- tion on your route.
4 T ouch [Diversion] to search for an alter- native route. After touching [ Diversion ], the route is recal- culated taking all traffic congestion on your current route into account. p [ Diversion ] will be available only when the system can find traffic congestion.
1 Display the “ Destination Menu ” screen. = For details of the operations, refer to Screen switching over view on page 22. 2 T ouch [MSN Direct]. The “ MSN Direct ” screen appears. 3 T ouch [Local Events]. The “ Local Event Date ” screen appears.
3 T ouch [News]. 4 T ouch the desired news headline. F urther details about the news are displayed. # T ouch [ Refresh ]. The information is updated. p [ Refresh ] appears when the new informa- tion is received. 5 T ouch or to scroll the list. Browsing stock quotes Recent stock quotes are displayed in a list.
2 Latest Price Displays the most recent stock prices. p If there is no data, “ ––––– ” is displayed. 3 Change since last closing price Displays change from the day before. p If there is no data, “ ––––– ” is displayed. 4 Timestamp Displays the time of the latest stock prices.
If your devices feature Bluetooth â technology , this navigation system can be connected to your devices wirelessly . This section describes how to set up a Bluetooth connection. For details about the connectivity with the de- vices featuring Bluetooth wireless technology , refer to the information on our website.
5 Wait until your Bluetooth device ap- pears in the list. p If you cannot find the Bluetooth device that you want to connect, check that the device is waiting for the Bluetooth wireless tech- nology connection. 6 T ouch the Bluetooth device name you want to register .
6 Register the navigation system on your Bluetooth device. If your device asks you to enter a password, enter the PIN code (password) of the naviga- tion system. When the device is successfully registered, the connection settings are made from the de- vice.
8 T ouch the Bluetooth device name you want to register . # T ouch [ Search Again ]. The system searches for devices featuring Blue- tooth technology that are waiting for the connec- tion and displays them in the list if a device is found. 9 Enter the PIN code (the default PIN code is “ 1111 ” ) using the Bluetooth device.
! Y ou want to reconnect a disconnected Bluetooth device. ! Connection cannot be established automa- tically for some reason. If you start connection manually, carry out the following procedure. Y ou can also connect the Bluetooth device by having the navigation sys- tem detect it automatically.
CAUTION For your safety , avoid talking on the phone as much as possible while driving. If your cellular phone features Bluetooth tech- nology , this navigation system can be con- nected to your cellular phone wirelessly . Using this hands-free function, you can operate the navigation system to make or receive phone calls.
Making a call home easily Y ou can call home without taking the time to enter the phone number if the phone number has been registered. 1 Display the “ Phone Menu ” screen. = For details, refer to Displaying the Phone Menu on the previous page. 2 T ouch [Call Home].
3 T ouch an entry on the list. Dialing starts. p T o cancel the call after the system starts dialing, touch . # T ouch [ Detail ]. The “ Detailed Information ” screen appears. Y ou can check the details of the party before mak- ing a phone call. 4 T ouch to end the call.
Dialing from the map Y ou can make a call by selecting the icon of a registered location or a POI icon from the map screen. p Y ou cannot make a call to locations or POIs that have no phone number data. 1 Scroll the map, and place the cursor on an icon on the map.
T ransferring the phone book Y ou can transfer the phone book entries from your cellular phone to the phone book of navi- gation system. p Depending on the cellular phone, Phone Book may be called Contacts, Business card or something else. p With some cellular phones, it may not be possible to transfer the entire phone book at once.
Deleting register ed contacts 1 Display the “ Phone Menu ” screen. = For details, refer to Displaying the Phone Menu on page 68. 2 T ouch [Contacts]. The “ Contacts List ” screen appears. 3 T ouch [Delete]. The “ Delete from Contacts ” screen appears.
1 Display the “ Settings Menu ” screen. = For details of the operations, refer to Screen switching over view on page 22. 2 T ouch [Bluetooth Settings]. The “ Bluetooth Settings ” screen appears. 3 T ouch [Bluetooth On/Off]. T ouching [ Bluetooth On/Off ] switches be- tween “ On ” and “ Off ” .
Clearing memory Y ou can clear the memor y of each item that corresponds to the connected cellular phone: phone book, dialed/received/missed call his- tor y list and preset dials. 1 Display the “ Settings Menu ” screen. = For details of the operations, refer to Screen switching over view on page 22.
! The line-of-sight distance between this na- vigation system and your cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology . However , the actual transmis- sion distance may be shorter than the esti- mated distance, depending on the usage environment.
This chapter describes the basic operations of the AV source. Y ou can play or use the following sources with the navigation system. ! TUNER (FM, AM) ! CD ! ROM (in MP3, AAC, WMA) ! DVD-V ideo ! DivX ! USB ! SD The following sources can be played back or used by connecting an auxiliar y device.
2 T ouch the key on the right edge of the screen. The AV operation screen returns. Selecting an item 1 Scroll by dragging items up or down, and display the item you want to select. p Flicking a list item enables you to quickly scroll through the list.
Y ou can listen to the radio by using the naviga- tion system. This section describes operations for radio (FM). Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 77.
Using the touch panel keys 6 5 1 3 4 2 1 Perform s manual tuning T o tune manually, touch [ o ]o r[ p ] briefly . The frequencies move up or down one step at a time. Perform s seek tuning T o per form seek tuning, touch and hold [ o ] or [ p ] for about one second and release.
1 Select a frequency that you want to store in memory . 2 Display the preset channel list. = For details, refer to Switches between the AV operation screen and the preset list display on the previous page. 3 Keep touching a preset tuning key [P1] to [P6].
1 T ouch on the “ FM ” screen. 2 T ouch [Local]. 3 T ouch [On] to turn local seek tuning on. T o turn local seek tuning off , touch [ Off ]. 4 T ouch [ c Prev] or [Next d ] to set the sen- sitivity .
Y ou can listen to the radio using this naviga- tion system. This section describes operations for radio (AM). Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 77.
Using the touch panel keys 5 1 3 4 2 1 Perform s manual tuning T o tune manually, touch [ o ]o r[ p ] briefly . The frequencies move up or down one step at a time. Perform s seek tuning T o per form seek tuning, touch and hold [ o ] or [ p ] for about one second and release.
2 Display the preset channel list. = For details, refer to Switches between the AV operation screen and the preset list display on the previous page. 3 Keep touching a preset tuning key [P1] to [P6]. Preset list display Preset tuning keys = For details of the list operations, refer to Op- erating list screens (e.
Y ou can listen to the radio by using the naviga- tion system. This section describes operations for HD Radio reception. p Y ou have to connect an HD Radio tuner (e. g. GEX-P20HD) (sold separately) to enable reception of HD Radio broadcasts on this navigation system.
Using the touch panel keys 6 7 1 4 5 2 3 1 Perform s manual tuning T o tune manually, touch [ o ]o r[ p ] briefly . The frequencies move up or down one step at a time. Perform s seek tuning T o per form seek tuning, touch and hold [ o ] or [ p ] for about one second and release.
1 Select a frequency that you want to store in memory . 2 Display the preset channel list. = For details, refer to Switches between the AV operation screen and the preset list display on the previous page. 3 Keep touching a preset tuning key [Pre- set 1] to [Preset 6].
3 T ouch [Start] to begin a search. BSM begins to flash. While “ BSM ” is flashing, the six strongest broadcast frequencies will be stored under the preset tuning keys “ Preset 1 ” to “ Preset 6 ” in order of their signal strength. When this is complete, “ BSM ” stops flashing.
Y ou can play a normal music CD using the built-in drive of the navigation system. This section describes how . Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 77.
Using the touch panel keys 9 8 7 12 3 5 6 4 1 Scans tracks of a CD Scan play is per formed by touching only one key . = F or details of the operation, refer to Scans tracks of a CD on the next page. 2 Plays tracks in random order All of the tracks in the disc can be played at random by touching only one key .
Using the “ Function ” menu % T ouch on the “ CD ” scree n. The “ Function ” menu appears. 1 2 3 4 1 Changes the repeat range Each touch of [ Repeat ] changes the setting as follows: ! Disc : Repeats the current disc. ! T rack : Repeats just the current track.
Y ou can play a disc that contains compressed audio files using the built-in drive of the navi- gation system. This section describes these operations. p In the following description, the MP3, WMA, AAC files are collectively referred to as “ Compressed audio file ” .
p “ ------- ” is displayed if there is no corre- sponding information. 3 Current time 4 File information ! File number indicator ! File name indicator ! File type indicator Shows the type of audio file. 5 Source icon Shows which source has been selected.
Using the touch panel keys 9 8 7 12 3 5 6 4 1 Scans folders and files Scan play is per formed by touching only one key . = F or details of the operation, refer to Scans folders and files on the next page. 2 Plays files in random order The files in the current repeat play range can be played at random by touching only one key.
T ouching displays the content of the upper folder (parent folder). If the uppermost folder is listed, cannot be used. 9 Switches the media file type played When playing a disc containing a mixture of various media file types, you can switch be- tween media file types to play .
Y ou can play a DVD-V ideo using the built-in drive of the navigation system. This section de- scribes operations for playing a DVD-V ideo. Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 77.
Using the touch panel keys Playback screen (page 1) 4 2 3 1 5 6 7 8 9 a b Playback screen (page 2) Playback screen (page 3) c d e f g h i j p With some discs, the icon 9 may be dis- played, meaning that the operation is inva- lid. 1 Resumes playback (Bookmark) = F or details, refer to Resuming playback (Bookmark) on the next page.
8 Switches to the next page of touch panel keys 9 Switches the display T ouching [ Disp ] changes the indication on the information plate as follows: Disc information display — Repeat range and L/R select display a Recalls equalizer curves = F or details, refer to Using the equalizer on page 172.
Searching for a specific scene and starting playback from a specified time Y ou can search for the scene you want by spe- cifying a title or a chapter , and the time. p Chapter search and time search are not available when disc playback has been stopped.
1 T ouch [ a ], [ b ], [ c ]o r[ d ] to select the desired menu item. p If the touch panel keys for DVD menu selec- tion disappear , touching anywhere on the screen, then touching displays them again. 2 T ouch [Enter]. Playback starts from the selected menu item.
Each touch of [ L/R Select ] changes the set- tings as follows: ! L+R : Left and right ! L : Left ! R : Right ! Mix : Mixing left and right p This function is not available when disc playback has been stopped. 3 DVD setup adjustments = For details, refer to Displaying DVD/ DivX® Setup menu on page 107.
Y ou can play a DivX disc using the built-in drive of the navigation system. This section de- scribes those operations. Starting procedure 1 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 77.
Using the touch panel keys Playback screen (page 1) a 3 2 1 4 5 6 7 8 9 Playback screen (page 2) b c d e f p With some discs, the icon 9 may be dis- played, meaning that the operation is inva- lid. 1 Selects a file from the list T ouching the key displays the list which lets you see the list of file names or folder names on a disc.
T ouching displays the content of the upper folder (parent folder). If the uppermost folder is listed, cannot be used. 2 Stops playback 3 Hides the touch panel keys and infor ma- tion of the current video T ouching [ Hide ] shows only the current video.
Starting playback from a specified time Y ou can search for a desired scene by specif y- ing the time. p Time search are not possible when disc playback has been stopped. 1 T ouch [Search]. 2 T ouch the keys to input the target num- ber or time and then touch [Enter].
This chapter describes how to configure the DVD-V ideo/DivX player . Displaying DVD/DivX® Setup menu 1 Play the disc that contains DVD-Video or DivX. 2 Display the A V operation screen. = For details of the operations, refer to Dis- playing the A V operation screen on page 77.
p When using a regular display , select either “ Letter Box ” or “ Panscan ” . Selecting “ 16:9 ” may result in an unnatural picture. 1 Display the “ DVD/DivX® Setup ” screen. = For details, refer to Displaying DVD/DivX® Setup menu on the previous page.
Setting the auto play When a DVD disc with DVD menu is inserted, this unit will cancel the DVD menu automati- cally and start playback from the first chapter of the first title. p This function is available for DVD - Video. p Some DVDs may not operate properly .
Language code chart for DVDs T wo -letter code, input code Language T wo -letter code, input code Language T wo -letter code, input code Language aa, 0101 Afar ia, 0901 Interlingua rn, 1814 Rundi ab, .
Y ou can play the compressed audio files stored in the external storage device (USB, SD). p In the following description, the SD mem- or y card and USB memory device are col- lectively referred to as the “ external storage device (USB, SD) ” . If it indicates the USB memor y device only , it is referred to as the “ USB storage device ” .
Indicator: Meaning Repeats all compressed audio files in the selected ex- ternal storage device (USB, SD). Repeats just the current file. Repeats the current folder . 2 Current file infor mation ! : Folder name Shows the folder name currently play- ing.
Using the touch panel keys ( Music ) 9 8 7 2 5 6 4 13 1 Scans folders and files Scan play is per formed by touching only one key . = F or details of the operation, refer to Scans folders and files on the next page. 2 Plays files in random order The files in the current repeat play range can be played at random by touching only one key.
T apping this key switches between the screen to operate music files and the screen to oper- ate video files. This touch panel key is avail- able only when there are both audio and video files in the external storage device (USB, SD). Using the “ Function ” menu % T ouch on the “ USB ” or “ SD ” screen.
Y ou can play the video files stored in the exter- nal storage device (USB, SD). p In the following description, the SD mem- or y card and USB memory device are col- lectively referred to as the “ external storage device (USB, SD) ” . If it indicates the USB memor y device only , it is referred to as the “ USB storage device ” .
Using the touch panel keys ( Video ) 9 76 8 1 2 3 54 1 Stops playback 2 Selects a file from the list Y ou can select and play the title you want from the list. = F or details, refer to Operating list scr eens (e.g. iP od list screen) on page 77. The contents of the folder in which the cur- rently playing file is located are displayed.
T apping this key switches between the screen to operate music files and the screen to oper- ate video files. This touch panel key is avail- able only when there are both audio and video files in the external storage device (USB, SD).
Using the USB inter face cable for iPod en- ables you to connect your iP od to the naviga- tion system. p A USB inter face cable for iP od (CD -IU50V) (sold separately) is required for connection. Starting procedure 1 Display the A V operation screen.
Shows the current chapter number and total number of chapters when the file with chapters played. ! Play time Shows the elapsed playing time within the current song (episode).
Using the touch panel keys Music d b c a 9 2 7 8 4 1 3 6 5 Video d 7 8 e g 9f 1 Sets the shuffle play for music The shuffle play setting can be changed by touching only one key . = F or details, refer to Sets the shuffle play for music on page 124. 2 Sets a repeat play range The repeat play range can be changed by touching only one key .
4 Selects a song to play Scrolling the keys up or down displays songs, and tapping a song starts playback. T apping the lower key during shuffle playback skips to the next song. T apping the upper key once skip to the start of the current song. T ap- ping it again will skip to the previous song.
Starting the video playback This navigation system can play video if an iP od with video capabilities is connected. 1 T ouch [iPod] on the left edge of the screen to display the touch panel key to switch to a video source. 2 T ap [Music]. A list of videos by categor y appears.
—“ AN ” , “ An ” ,o r “ an ” —“ THE ” , “ The ” ,o r “ the ” 4 Scroll by dragging items up or down, and display the item you want to select. Refine the item until the song title (episode) is displayed on the list. p T apping [ All ] on the list includes all options in the current list.
Playing MusicSphere Y ou can play playlists created with the PC ap- plication ( MusicSphere ) using an exciting gra- phic inter face. p PC application ( MusicSphere ) will be avail- able on our website. Reading the screen 5 4 1 2 1 3 1 Playlist name indicator Shows the name of the playlist currently se- lected.
3 Sets the audiobook play speed While listening to an audiobook on iP od, playback speed can be changed. Each touch of [ Audio Book ] changes the setting as follows: ! Normal : Playback in normal spee.
IMPORT ANT : Requirements to access the P andora music ser- vice using the P ioneer navigation system: ! Apple iPhone (first generation), iPhone 3G, or iPhone 3GS, with firmware version 3.0 or later . ! Latest version of the P andora application for the iPhone, downloaded to your device.
Reading the screen 4 1 2 3 1 Current song infor mation ! Station name indicator Shows the P andora station name the tuner is currently tuned in. ! : Artist name Shows the artist name currently playing. ! : Album title Shows the title of the album for the cur- rent song.
Using the touch panel keys 1 6 5 4 2 3 1 Selects a Pandora station fr om the list T ouching the key displays the list of your P an- dora stations to select one of them to play. = F or details, refer to Operating list scr eens (e.g. iP od list screen) on page 77.
Y ou can control the Bluetooth audio player featuring Bluetooth wireless technology . p Before using the Bluetooth audio player , you need to register and connect the device to this navigation system. = F or details, refer to Registering your Blue- tooth devices on page 63.
Indicator: Meaning Does not repeat. Repeats just the current file. Repeats all audio files in the Bluetooth audio player . 2 Current file infor mation If the connected Bluetooth audio player fea- tures AVRCP 1.3, the following file information will be displayed.
Using the touch panel keys 12 54 6 3 1 Plays files in random order All of the files within the repeat play range can be played at random by touching only one key . p This function is available only when the connected Bluetooth audio player fea- tures AVRCP 1.
Each touch of [ Repeat ] changes the setting as follows: ! All Repeat : Repeats all audio files in the Bluetooth audio player . ! T rack Repeat : Repeats just the current file.
Y ou can use the navigation system to control an XM satellite digital tuner , which is sold se- parately . F or details concerning operation, refer to the XM tuner ’ s operation manuals. This section provides information on XM operations with the navigation system which differs from that described in the XM tuner ’ s operation man- ual.
Shows the artist (performer) name cur- rently playing (when available). ! : Song title (program name) Shows the title of the current song (pro- gram). p “ ------- ” is displayed if there is no corre- sponding information.
Using the touch panel keys All CH Mode c a b 9 8 6 7 4 5 3 2 11 Category Mode c a b 9 8 6 7 4 e 5 3 2 dd 1 Perform s manual tuning The channels move up or down one at a time. p If you keep touching [ o ]o r[ p ] you can skip the broadcasting channels.
= F or details, refer to Memorizing the song on the next page. 4 Recalls channels from the pr eset Once you have stored broadcast channels, you can easily recall preset channels from memory with a tap of a key. = F or details, refer to Storing and r ecalling broadcast stations on this page.
1 Select the channel that you want to store in memory . 2 Display the preset channel list. = For details, refer to Switches between the AV operation screen and the preset list display on page 135. 3 Keep touching a preset tuning key [P1] to [P6]. The selected station has been stored in mem- or y .
p The memorized title may not be displayed correctly depending on the conditions. p Y ou can customize the setting for the mem- orized songs later . = For more details concerning the opera- tion, refer to Setting the memorized songs on this page. When the memorized song is broadcast A beep sounds, and a message is displayed.
Y ou can use the navigation system to control a Pioneer Sirius Satellite Radio tuner , which is sold separately . F or details concerning operation, refer to the SIRIUS tuner ’ s operation manuals.
Using the touch panel keys All CH Mode b a 9 7 8 5 6 4 2 3 1 Category Mode b a 9 7 8 5 c 6 4 2 3 1 1 Switches the SIRIUS Instant replay mode = F or details, refer to Using the “ Instant Replay ” function on page 142. 2 Perform s manual tuning The channels move up or down one at a time.
= F or details, refer to Memorizing the song on the next page. 5 Recalls channels from the pr eset T ap to recall the preset channel. = F or details, refer to Storing and r ecalling broadcast stations on this page. 6 Switches the SIRIUS display Each touch of [ Disp ] changes the display in- formation.
2 Display the preset channel list. = For details, refer to Switches between the AV operation screen and the preset list display on the previous page. 3 Keep touching a preset tuning key [Preset 1] to [Preset 6]. The selected station has been stored in mem- or y .
p During “ Instant Replay ” mode, each touch of [ Disp ] changes the display information as follows; Time position — Channel number — Chan- nel name — Channel categor y — Artist name/feature — Song/program title — Composer p Y ou cannot replay the broadcast prior to the beginning of stored data.
Using the Game Alert function Selecting teams for Game Alert This navigation system can alert you when games involving your favorite sports teams are about to start. T o use this function you need to store the teams you want to follow in advance. 1 T ouch [Game Alert].
Y ou can display the video image output by the equipment connected to the navigation sys- tem. For details of the connection method, refer to Installation Manual. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion.
The term “ external unit ” refers to future Pioneer devices that are not currently planned for , or to devices that allow control of basic functions although they are not fully con- trolled by the navigation system. T wo external units can be controlled by this navigation sys- tem.
Using the touch panel keys 64 3 2 1 5 1 Sends a [ 1 ] key to [ 6 ] key command The external unit can be operated by transmit- ting the operating commands set to “ 1 ” key through “ 6 ” key . p Operation varies depending on the ex- ternal unit connected.
Displaying the “ Navi Settings ” screen 1 Press the HOME button to display the “ T op Menu ” screen. 2 T ouch [Settings]. The “ Settings Menu ” screen appears. p This can also be operated using the “ Short- cut Menu ” screen. 3 T ouch [Navi Settings].
When the gear lever is shifted to “ R ” , the signal switches to “ High ” or “ Low ” . (One of these is displayed depending on the vehicle.) Checking sensor learning status and driving status p The navigation system can automatically use its sensor memor y based on the outer dimensions of the tires.
4 T ouch [All]. Clears all learning statuses. p T ouch [ All ] for the following cases: ! After changing the installation position of the navigation system ! After changing the installation angle of the navigation system ! After moving the navigation system to another vehicle # T ouch [ Distance ].
Calculating the fuel consump tion When you enter the fueling information to the navigation system, and export the data to SD memor y cards, you can check the fuel con- sumption information by using the utility pro- gram AVIC FEEDS, which is available separately , on your PC.
4 T ouch [Export]. After a message confirming whether to export the data appeared, exporting the data to the SD memor y card starts. The “ Gas Mileage Setting ” screen appears when it is done. Recording your travel history Activating the track logger enables you to re- cord your driving histor y (called “ track log ” below).
3 T ouch [Home]. The “ Select Search method ” screen appears. # T ouch [ Phone# ]. When you have already registered your home, you can edit your home number . 4 Search for a location. = For details, refer to Chapter 6. After searching for a point, the map of the se- lected position is displayed.
Displaying the “ Map Settings ” screen 1 Press the HOME button to display the “ T op Menu ” screen. 2 T ouch [Settings]. The “ Settings Menu ” screen appears. 3 T ouch [Map Settings]. The “ Map Settings ” screen appears. 4 T ouch the item that you want to change the setting.
Setting the detailed city map Y ou can select whether to display the city map when in certain metropolitan city areas. p The detailed city map and this setting are available for AVIC -Z120BT only . p The city map is displayed when the map scale is 0.05 mile (50 meters) or less.
Displaying the Bluetooth connection icon Selects whether to display or hide the icon for current status of the phone connection via Bluetooth wireless technology. 1 Display the “ Map Settings ” screen. = For details, refer to Displaying the “ Map Settings ” screen on page 154.
Displaying maneuvers Selects whether to display or hide maneuvers on the map. Maneuvers 1 Display the “ Map Settings ” screen. = For details, refer to Displaying the “ Map Settings ” screen on page 154. 2 T ouch [Displayed Info]. The “ Displayed Information ” screen appears.
3 T ouch [Display] to change the setting to “ On ” . p If you do not want to display the POI icon on the map, touch [ Display ] to turn it “ Off ” . (Even if “ Display ” is turned “ Off ” , the POI selection setting is retained.) 4 T ouch [POI].
4 T ouch [Display] to change the setting to “ On ” . p If you do not want to display the POI icon on the map, touch [ Display ] to turn it “ Off ” . (Even if “ Display ” is turned “ Off ” , the POI selection setting is retained.) 5 T ouch [Custom POI].
Changing the setting of navigation interruption screen Set whether to automatically switch to the na- vigation screen from the audio screen when your vehicle approaches a guidance point such as an intersection while displaying a screen other than navigation.
= For details, refer to Setting the “ Favor - ites ” icon display on page 156. 4 T o finish the setting, touch [OK]. Displaying the “ System Settings ” screen 1 Press the HOME button to display the “ T op Menu ” screen. 2 T ouch [Settings].
Setting the time difference Adjusts the system ’ s clock. Set the time differ- ence ( + , – ) from the time originally set in your navigation system. 1 Display the “ System Settings ” screen. = For details, refer to Displaying the “ System Settings ” screen on the previous page.
4 T ouch [+] or [ – ] to set the speed. p The estimated time of arrival is not necessa- rily estimated based on this speed value. 5 T ouch [OK]. The settings are completed. Setting the V olume for Guidance and Phone The sound volume for the navigation can be set.
4 T ouch [OK]. The image is set as the splash screen, and the “ System Settings ” screen returns. Changing to the splash screen stored in the SD memory card Y ou can change the splash screen that ap- pears when the navigation system starts. Copy your chosen image to the SD memor y card, and select the image to import.
p Immediately verify whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position. p When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in “ Polarity ” .
= For details, refer to Creating a user-de- fined color and storing it to memor y on this page. ! Scan : Shifts between the eight default col- ors in sequence gradually . ! Eco : The colors change in the order of white, red, amber , yellow , green, and blue as the number of points in the “ Eco Score ” increases.
— When selecting “ Rear View ” in the map display , nothing is displayed. — All sounds cannot be output for “ Rear display ” . — When playing back video files on the ex- ternal storage device (USB, SD), the video image is not output. p When “ DISC ” is selected, the following re- striction is applied to “ Rear display ” .
— AV 2 (Video) and EXT1 (Video ), EXT2 (Video) — Rear view camera image — Map screen p The picture adjustment may not be avail- able with some rear view cameras. p Because of the LCD screen characteristics, you may not be able to adjust the screen at low temperatures.
1 Display the “ A V System Settings ” screen. = For details, refer to Displaying the “ A V Sys- tem Settings ” screen on the previous page. 2 T ouch [A V2 Input]. Each touch of [ A V2 Input ] changes the set- ting as follows: ! Off : No video component is connected.
Switching the muting/ attenuation timing Y ou can mute the AV source volume or attenu- ate the output signal. This setting is invalid for the mute signal that has been received from the MUTE lead connected to the navigation unit.
p This function is available when “ Change Control Mode ” is set to “ Navi ” . p If you do not use iP od, this setting is un- necessar y . p During transfer , the following iPod opera- tions are not available.
2 T ouch [Settings]. The “ Settings Menu ” screen appears. 3 T ouch [A V Sound]. The “ A V Sound Settings ” screen appears. p Y ou cannot make adjustments in the follow- ing situations: — AV source is “ Off ” . — During muting/attenuation p Y ou cannot select “ SLA ” when the FM tuner is selected as the A V source.
Recalling equalizer curves There are seven stored equalizer cur ves that you can easily recall at any time. Here is a list of the equalizer cur ves: Equalizer curve SuperBass is a cur ve in which only low-pitched sound is boosted. Powerful is a cur ve in which low-pitched and high- pitched sounds are boosted.
— AV 1 and AV 2 — SD and USB ! The different source volume level can be set between iPod and USB . ! When “ Flat ” is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer cur ves by switching alternatively between “ Flat ” and a set equalizer cur ve.
Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, activate HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers.
= For details, refer to Using the high pass filter on the previous page. Adjusting a position effect Y ou can select a listener position that you want to make as the center of sound effects. 1 Display the “ A V Sound Settings ” screen. = For details, refer to Displaying the “ AV Sound Settings ” screen on page 171.
T urning off the screen By turning off the backlight of the LCD screen, you can turn off the screen display without turning off the voice guidance. 1 Press the HOME button to display the “ T op Menu ” screen. 2 T ouch [Settings]. The “ Settings Menu ” screen appears.
T o Ensure Safe Driving CAUTION For your safety , avoid viewing the screen in the voice operation as much as possible while driving. If you use voice operation, select [ English ]i n [ V oice Language ]o f “ Regional Settings ” .I f you select other languages, voice operation will not be available.
1 V oice help menu: Displays a list of commands for voice oper- ation. 2 V oice operation condition indicator: When is indicated, the navigation sys- tem can recognize your voice commands. 3 : Y ou can listen to the brief operating in- struction. 4 : cancels voice operation.
4 Say “ Point of interest ” . The list of POI categories appears. 5 Say the category that you want to set to your destination. The list of candidates with number appears. 6 Say the number that you want to select. Y our navigation system sets the route to your destination, and the map of your surroundings appears.
A vailable Basic V oice Commands The navigation system can also recognize the words in the followi ng list. p T erms written in italics are voice commands. Basic commands V oice commands and operations Back d The previous screen returns. Cancel d Cancels the voice operation.
V oice commands and operations Browse playlists d Displays the playli st together with sub-scree n to continue the voice operation. d Say the desired voice commands. Browse the playlist <Playlist name> d Displays the song list of the selected playlist together with sub-screen to continue the voice operation.
V oice commands related to hands-free phoning p Y ou can make a phone call by voice dialing if the cellular phone featuring Bluetooth wireless tech nology is being paired with the navigation system. p For <entry ’ s name> shown on the fol lowing chart, say the name of the entr y stored in “ Contacts ” .
Tips for V oice Operation F or your voice commands to be correctly re- cognized and interpreted, ensure that condi- tions are suitable for recognition. Close the vehicle windows Please note that wind through the vehicle win- dow or miscellaneous noise from outside the vehicle can inter fere with voice operation.
Setting the anti-theft function Y ou can set a password for the navigation sys- tem. If the back-up lead is cut after the pass- word is set, the navigation system prompts for the password at the time of next boot up. Setting the password 1 Press the HOME button to display the “ T op Menu ” screen.
Returning the navigation system to the default or factory settings Y ou can return settings or recorded content to the default or factor y settings. There are some methods to clear user data, and the situations and the cleared content are different for each method.
Setting items to be deleted The items to be deleted vary depending on the reset method. The items listed in the following table re- turn to the default or factor y settings.
Navigation functions Method 1 Method 2 Method 3 Method 4 Phone Menu All settings (*1) — 111 Other functio ns Anti-th eft password ——— — (*1) All stored data of 5 users is deleted.
T roubleshooting If you have problems operating your navigation system, refer to this section. The most common problems are listed below , along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized P ioneer ser vice facility.
Symptom Cause Action (Reference) Y ou cannot positio n your vehicl e on the map without a significant positioning error . Something covers the GPS antenna. Do not cover the GPS antenna with spray paint or vehicle wax, because this may block the reception of GPS signa ls.
Symptom Cause Action (Reference) There ’ s no picture. The parking brake cord is not con- nected. Connect the parking brake cord, and apply the parking brake. The parking brake is not applied. Connect the parking brake cord, and apply the parking brake.
Symptom Cause Action (Reference) No video output from connected equipment. No video output from connected iP od. “ A V1 Input ” or “ AV2 Input ” setting is incorrect. Correct the settings. (Page 145) The connection of the USB inter face cable for iP od is incorrect.
Problems with the phone screen Symptom Cause Action (Reference) Dialing is not pos sible because the touch panel keys for dialing are inactive. Y our phone is out of range for ser- vice. Retry after re-ent ering the range for service. The connection between the cellular phone and the navigation system cannot be established now.
Messages and how to react to them The following messages may be displayed by your navigation system. Refer to the table below to identify the problem, then take the suggested corrective action. There are occasions when you may see error messages other than those shown here.
Message Cause Action (Reference) Connection failed. The cellular phone ’ s Bluetooth wire- less technology is turned off. Activate the target phone ’ s Bluetooth wire- less technology. The cellular phone is paired (con- nected) with another device.
Messages for audio functions When problems occur with AV source playback, an error message appears on the display . Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center .
Message Cause Action (Reference) Cannot play back all tracks All the files on the inserted external storage device are secured by DRM. Store playable files. All of the files cannot be playe d by this unit. Replace it with the playable file. (P ag e 207, P age 223) USB flash drive was discon- nected for device protection.
Positioning technology Positioning by GPS The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 21 000 km, continually broadcasts radio sig- nals giving time and position information.
Map matching As mentioned, the positioning systems used by this navigation system are susceptible to certain errors. Their calculations may , on occa- sion, place you in a location on the map where no road exists.
Conditions likely to cause noticeable positioning errors F or various reasons, such as the state of the road you are traveling on and the reception status of the GPS signal, the actual position of your vehicle may differ from the position dis- played on the map screen.
! If you are on a steep mountain road with many height changes. ! If you enter or exit a multi-storey parking lot or similar structure using a spiral ramp. ! If your vehicle is turned on a turntable or si- milar structure. ! If your vehicle ’ s wheels spin, such as on a gravel road or in snow .
Route setting information Route search specifications Y our navigation system sets a route to your destination by applying certain built-in rules to the map data. This section provides some use- ful information about how a route is set. CAUTION When a route is calculated, the route and voice guidance for the route are automatically set.
Built-in drive and care ! Use only conventional, fully circular discs. Do not use shaped discs. ! Do not use cracked, chipped, warped, or otherwise damaged discs as they may da- mage the built-in drive. ! Do not touch the recorded sur face of the discs.
Playing DualDisc ! DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other . ! Playback of the DVD side is possible with this navigation system.
! It may not be possible to playback CD-R/ CD-RW discs recorded on a music CD re- corder or a personal computer because of disc characteristics, scratches or dirt on the disc, or dirt, scratches or condensation on the lens of the built-in drive.
! The navigation system corresponds to a DivX file display of up to 1 590 minutes 43 seconds. Search operations beyond this time limit are prohibited. ! DivX VOD file playback requires supplying the ID code of this navigation system to the DivX VOD provider .
Media compatibility chart General Media CD-R/-RW DVD -R/-RW/-R DL USB storage de- vice SD memory card File system ISO9660 level 1, ISO9660 level 2, Romeo and Joliet ISO9660 level 1, ISO9660 level 2, Romeo, Joliet and UDF 1.
WMA compatibility Media CD-R/-RW DVD -R/-RW/-R DL USB storage de- vice SD memory card File extension .wma Bit rate 5 kbps to 320 kbps (CBR), VBR Sampling frequency 8 kHz to 48 kHz Note: The navigation.
DivX compatibility Media CD-R/-RW DVD -R/-RW/-R DL USB storage de- vice SD memory card File extension .avi/.divx DivX files on the external storage device (USB, SD) cannot be played. Profile (DivX version) Home Theater Ver . 3.11/Ver . 4.x/Ver . 5.x/ Ve r .
Video files compatibility (USB, SD) File extension .avi .mp4, .m4v .wmv Format MPEG-4 MPEG -4 H.264 WMV Compatible video codec MPEG -4 MPEG-4 H.264 WMV Compatible audio codec Linear PCM (LPCM), IMA- A.
Example of a hierarchy The following figure is an example of the tier structure in the disc. The numbers in the fig- ure indicate the order in which folder numbers are assigned and the order to be played back. : Folder :F i l e 1 2 3 4 5 6 L e v e l 1 L e v e l 2 L e v e l 3 L e v e l 4 Notes ! This product assigns folder numbers.
SD and SDHC logo SD Logo is a trademark of SD-3C, LLC. SDHC Logo is a trademark of SD-3C, LLC. microSD Logo is a trademark of SD-3C, LLC. microSDHC Logo is a trademark of SD-3C, LLC. WMA/WMV Windows Media ™ and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG -2 and MPEG-4. Sev- eral applications can be used to encode AAC files, but file formats and extensions differ de- pending on the application which is used to encode.
! Do not use the LCD screen at temperatures higher or lower than the operating tem- perature range, because the LCD screen may not operate normally and could be da- maged. ! The LCD screen is exposed in order to in- crease its visibility within the vehicle.
Display information Destination Menu Page Address 34 Return Home 36 POI Gas Station 36 AT M Coffee Hotel Spell Name 37 Near Me 37 Near Destination 38 Around City 38 AVIC FEEDS 39 Favorites 39, 46 Hist.
Settings Menu Page Navi Settings 148 System Settings 161 AV Settings 168 AV Sound 171 Map Settings 154 Bluetooth Settings 73 Setting Replicator 176 Navi Settings menu Page Connection Status 148 3D Cal.
System Settings menu Page Regional Settings Program Language , V oice Lan- guage 161 Time 162 km / mile 162 Average Speed 162 V olume 163 Splash Screen 163 Back Camera 164 Screen Calibration 165 Illum.
A V System Settings menu Page AV1 Input 168 AV2 Input 168 Wide Mode 169 Mute 170 Mute Level 170 Rear SP 169 DivX VOD 171 VR Catalog Menu 170 A V Sound Settings menu Page FAD/BAL ( Balance )1 7 2 EQ 17.
Bluetooth Settings menu Page Connection 66 Registration 63 Device Name 73 Password 73 Bluetooth On/Off 73 Echo Cancel 74 Auto Answer Preference 74 Refuse All Calls 74 Clear Memory 75 Firmware update 7.
Glossary AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG-2 and MPEG-4. Aspect ratio This is the width-to-height ratio of a TV screen.
ID3 tag This is a method of embedding track-related information in an MP3 file. This embedded in- formation can include the track title, the ar- tist ’ s name, the album title, the music genre, the year of production, comments and other data. The contents can be freely edited using software with ID3 tag editing functions.
Parental lock Some DVD-Video discs with violent or adult-or- iented scenes feature parental lock which pre- vents children from viewing such scenes. With this kind of disc, if you set the unit ’ s parental lock level, playback of scenes inappropriate for children will be disabled, or these scenes will be skipped.
Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 10.8 V to 15.1 V DC) Grounding system ................... Negative type Maximum current consumption ........................................... 10.0 A Dimensions (W × H × D): AVIC -Z120BT Chassis .
DVD Drive System .......................................... DVD-Video, CD, MP3, WMA, AAC, DivX system Usable discs .............................. DVD-Video, DVD-R(DL), DVD-RW , CD-ROM, CD-DA , CD-R/RW Region number ........................ 1 Signal format: Sampling frequency .
En 225.
En 226.
En 227.
PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanagaw a 212-0031, JAP AN PIONEER ELECTRONICS (USA) INC. P .O . Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, K eetberglaan 1, B-91 20 Melsele, Belgium/Belgique TEL: (0) 3/570.
デバイスPioneer AVIC-X920BTの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Pioneer AVIC-X920BTをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer AVIC-X920BTの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer AVIC-X920BTの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer AVIC-X920BTで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer AVIC-X920BTを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer AVIC-X920BTの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer AVIC-X920BTに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer AVIC-X920BTデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
