PioneerメーカーDJM-500の使用説明書/サービス説明書
ページ先へ移動 of 20
Operating Instructions DJM-500 DJ MIXER IMPORT ANT NOTICE: RECORD THE MODEL NUMBER AND SERIAL NUMBER OF THIS EQUIPMENT BELOW . THE NUMBERS ARE ON THE REAR P ANEL. MODEL NO. DJM-500 SERIAL NO. KEEP THESE NUMBERS FOR FUTURE USE. W ARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
2 <DRB1192> The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 <DRB1192> This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4 <DRB1192> Location Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity . Do not install the unit in a location which is exposed to direct rays of the sun, or near stoves or radiators. Exces- sive heat can adversely affect the cabinet and internal com- ponents.
5 <DRB1192> FEA TURES BPM Counter The auto BPM counter provided allows the tempo of songs to be checked visually . This counter can be switched be- tween real-time and average. BPM Level Display (Beat meter display) Displays the level of sound components determining the BPM.
6 <DRB1192> White plug Red plug R L DJM-500 Connecting audio cords Use cords with red and white pin plugs. Connect the white plug to (L) and the red plug to (R).
7 <DRB1192> Main microphone Headphone External effector Power amplifier (Supporting XLR input) Power amplifier (Supporting PHONE input) DJM-500 DJM-500 Sub microphone Power amplifier (For booth monitor) *1 2. Connection of Outputs, Microphones, Etc.
8 <DRB1192> Front section NAME AND FUNCTION OF P ARTS M IC CH–1 CH–2 CH–3 CH–4 MASTER POWER DJM-500 DJ MIXER MASTER LEVEL TRIM +6dB HI MID LOW 14 10 7 4 2 1 0 -1 -2 -3 -5 -7 -10 -15 -24 .
9 <DRB1192> 1 Main Microphone T erminal and Microphone Control Knob MIC Level: Used for adjusting the volume of the main microphone. (Attenuated level – ∞ to 0 dB) HI: Used for adjusting the high tone of the microphone sound. Flat at center click.
10 <DRB1192> NAME AND FUNCTION OF P ARTS 9 Monitor Monaural/Stereo Selector Switch (MONO/STEREO) 0 Monitor Equalizer Knob (MONITOR EQ) Used to obtain the beat easily with the headphone moni- tor sound. Increases/decreases low tone. Flat at center click.
11 <DRB1192> NAME AND FUNCTION OF P ARTS Rear section 0- = ~ ! 1 2 3 4 5 67 989 1 Master Output 1 T erminal (MASTER OUT 1) Connects the power amplifier using a cord with RCA plug. 2 Booth Monitor Output T erminal (BOOTH MONITOR) Connects the power amplifier which connects the speaker for monitoring audio.
12 <DRB1192> USING THE EFFECT FUNCTION With the built-in DSP (digital signal processor), sound ef- fects can be enjoyed and BPM measured. Real-time/average selection Effect selector Effect chann.
13 <DRB1192> (Example) Center (Stereo) Center (Stereo) 1 cycle=1/2, 1/1, 2/1, 4/1 beat Short Auto Pan (Example) 7. Send/Return (External Effects Input/output) Connects available effectors, samplers, etc. 5. Pitch Shifter The pitch (key) can be changed within the ±1 octave range.
14 <DRB1192> Measuring BPM 1 / 2 3 / 4 1 /1 2 / 1 4 / 1 1234 M I C MASTER PARAMETER AVERAGE AUTO BPM COUNTER REAL BEAT BPM 123 4 BPM Songs with different tempos can be mixed easily because the B.
15 <DRB1192> USING THE EFFECT FUNCTION Operating Delay , Echo, Auto pan, Flanger (Example) Impose the delay effects on the CH2 song. 1 / 2 3 / 4 1 /1 2 / 1 4 / 1 1234 M I C MASTER PARAMETER AVERAGE AUTO BPM COUNTER REAL BEAT BPM 123 4 mSec 1 Set the effect selector to DELA Y.
16 <DRB1192> USING THE EFFECT FUNCTION Operating Pitch Shifter and Reverb 1 / 2 3 / 4 1 /1 2 / 1 4 / 1 1234 M I C MASTER PARAMETER AVERAGE AUTO BPM COUNTER REAL BEAT % 123 4 Display where CH3 has been pitch-shifted by 90%. Using the External Effector (Example) Set the external effect for the CH3 song.
17 <DRB1192> By connecting the optional CD players CDJ-500G and CDJ-500 to CH1 and CH2, the player can be started using the channel fader or cross fader controls.
18 <DRB1192> Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below . Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
19 <DRB1192> SPECIFICA TIONS Audio Section Input terminal (Input level/impedance) CD/LINE .................................... –14 dBV (200 mV) / 22 k Ω PHONO ......................................... –54 dBV (2 mV) / 47 k Ω MAIN MIC ...
PIONEER ELECTRONIC CORPORA TION 4-1, Meguro 1-Chome, Meguro-ku, T okyo 153, Japan PIONEER NEW MEDIA TECHNOLOGIES, INC. 2265 East 220th Street, Long Beach, California 90810, U.S.A. PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway , Markham, Ontario L3R OP2, Canada Published by Pioneer Electronic Corporation.
デバイスPioneer DJM-500の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Pioneer DJM-500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer DJM-500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer DJM-500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer DJM-500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer DJM-500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer DJM-500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer DJM-500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer DJM-500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。