PioneerメーカーPRO 1410HDの使用説明書/サービス説明書
ページ先へ移動 of 19
English En Operating Instructions Thank you very much for purchasing this PIONEER product. Before using your Plasma Display , please carefully read the “Important Information” and these “Operating Instructions” so you will know how to operate the Plasma Display properly .
English Important Information 2 En i En Precautions Please read this manual carefully before using your plasma monitor and keep the manual handy for future reference. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
English Important Information 4 En iii En DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
English Important Information 6 En v En English 1 En Contents Contents of the Package Plasma monitor Po wer cord Remote control with two AAA Batteries Manual W arranty Safety m.
English 2 En 50 mm (2") 50 mm (2") 50 mm (2") Wall Wall 50 mm (2") 50 mm (2") Y ou can attach your optional mounts or stand to the plasma monitor in one of the follo wing two ways: * While it is upright. (See Drawing A) * As it is laid down with the screen face down (See Drawing B).
English 4 En q Po wer ( ) T urns the monitor’ s power on and of f. w Remote sensor window Recei ves the signals from the remote control. e ST ANDBY/ON indicator When the po wer is on ............................. Lights green. When the power is in the standby mode .
English 6 En q PO WER ON/ST ANDBY Switches the power on/standby . (This does not operate when ST ANDBY/ON indicator of the main unit is of f.) w OFF TIMER Acti vates the of f timer for the unit. e DISPLA Y Displays the source settings on the screen. r SCREEN SIZE Automatically detects the signal and sets the aspect ratio.
English 8 En SCREEN SIZE Operation (manual) W ith this function, you can select one of six screen sizes. When viewing videos or digital video discs 1. Press the SCREEN SIZE b utton on the remote control. 2. W ithin 3 seconds ... Press the SCREEN SIZE button again.
English 10 En SPLIT SCREEN Operations SPLIT SCREEN Operations Showing a couple of pictures on the screen at the same time * A PC-input picture may not be displayed in these modes, depending on the input signal specifications. 1. Press the button to select a screen mode from among single mode, side-by-side, and picture-in-picture.
English 12 En OSD (On Screen Display) Controls OSD (On Screen Display) Controls Menu Operations The follo wing describes how to use the menus and the selected items. 1. Press the MENU/SET button on the remote control to display the MAIN MENU. SEL. MENU OK EXIT EXIT MAIN MENU PICTURE SOUND SCREEN SET UP FUNCTION SIGNAL INFO.
English 14 En *1 Only when A UTO PICTURE is OFF . *2 PC only Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET REFERENCE FUNCTION POWER MGT . ON ←→ OFF YES 22 INPUT SKIP ON ←→ OFF YES 22 SUB.
English 16 En OSD (On Screen Display) Controls Setting the color temperature Use this procedure to set color tone produced by the plasma display . Example: Setting “HIGH” On “COLOR TEMP . ” of “PICTURE” menu, select “HIGH”. EXIT RETURN SEL.
English 18 En OSD (On Screen Display) Controls SOUND Settings Menu Adjusting the treble, bass and left/right balance and audio input select The treble, bass and left/right balance can be adjusted to suit your tastes. Example: Adjusting the bass On “B ASS” of “SOUND” menu, adjust the bass.
English 20 En OSD (On Screen Display) Controls Information RGB SELECT modes One of these 8 modes must be selected in order to display the follo wing signals correctly . AUTO: Select the suitable mode for the specifications of input signals as listed in the table “Computer input signals supported by this system” on page 27.
English 22 En OSD (On Screen Display) Controls Function Settings Menu Setting the power management for computer images This energy-sa ving (po wer management) function automatically reduces the monitor’ s power consumption if no operation is performed for a certain amount of time.
English 24 En OSD (On Screen Display) Controls ABL (Auto Brightness Limiter) Use this to acti vate the brightness limiter . Example: Setting “ABL” to “75” On “ ABL” of “LONG LIFE” menu, select “75”.
English 26 En 5 4 3 2 1 15 14 13 12 11 10 9 8 7 6 PC 1 mini D-Sub 15-pin connector (Analog) Signal (Analog) Red Green or sync-on-green Blue No connection Ground Red ground Green ground Blue ground No connection Sync signal ground No connection Bi-directional DA T A (SDA) Horizontal sync or Composite sync V ertical sync Data clock Pin No.
English 28 En *1 Only when using a graphic accelerator board that is capable of displaying 852 480. *2 This signal is con v erted to a 1024 dots 640 lines signal. *3 The picture is displayed in the original resolution. *4 The aspect ratio is 5:4.
English 30 En Specifications Specifications Screen Size 53.2"(H) 29.9"(V) inches 1351(H) 760(V) mm diagonal 61" Aspect Ratio 16 : 9 Resolution 1365(H) 768(V) pixels Signals Synchronization Range Horizontal : 15.8 to 110 kHz (automatic : step scan) V ertical : 59.
デバイスPioneer PRO 1410HDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Pioneer PRO 1410HDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPioneer PRO 1410HDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pioneer PRO 1410HDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pioneer PRO 1410HDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pioneer PRO 1410HDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPioneer PRO 1410HDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pioneer PRO 1410HDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPioneer PRO 1410HDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
