Pitney BowesメーカーK700. K7M0の使用説明書/サービス説明書
ページ先へ移動 of 32
Install Guide US English V ersion Digital Postage Meter with.
Digi tal Post age Mete r Oper atin g Gu ide Lock Class Funds Menu *#_ GHI PQRS Back ABC JKL TUV Space DEF MNO WXYZ Shift . Review no yes Enter Power Cord mailstation 2 Ink Cartridge Reorder #797 - M S.
If network access is available for your meter , you can: If you do not have network access for your meter , go to page 17 “Alternative Method: Using an Analog Phone Line” Read This First T o take advantage of the web-based capabilities of your meter with pbWebConnect™, your meter must be connected to your network.
.
1 Installation Part 1 - Set Up Communication Device 1 Preparing for Installation T o install your meter using the Internet, you will need the following: • Tw o power outlets • An Internet source, such as a router , hub or network wall jack.
2 Installation Part 1 - Set Up Communication Device 2 3 Locate the Communication Device and Network Cable ( ) Connect the Communication Device to your Internet source Be sure to connect to an active network port. Note: If you are not certain where to connect, or whether your network requires special settings, consult your IT specialist.
T roubleshooting 1 Communication Device may not be communicating to an active network port. T ry the following: • Be sure the Network Cable ( ) is properly connected at both ends. • T ryotherports(for10secondseach)untilyoundonethatisactive (LED changes from solid orange to green ).
4 Installation Part 1 - Set Up Communication Device When power is applied, the meter will display its startup screens and you will hear the meter ’s printer initialize.
Installation Part 1 - Set Up Communication Device 8 ConrmConnection DO NOT press Enter on the meter yet. For wireless connection and meter setup go to Step 9 on page 7. About 10 seconds after the meter completes its startup routine, it displays the message: Also, the right LED changes from blinking orange to blinking green only .
6 Special Network Settings This section is needed only if your network requires special settings to operate properly , such as static IPs and proxy server IDs, the settings will need to be added to the Communication Device. Consult your IT specialist to determine if this is necessary .
7 Installation Part 2 - Set Up Meter 9 Wireless Connection (Optional) T o set up wireless capability , go to: www .pb.com/support/LAN Scroll down to select the link Wireless Setup Instructions . Once your meter is connected to the internet wirelessly , begin meter installation on Step 10 below .
8 Installation Part 2 - Set Up Meter 11 Install scale Position the scale on top of the meter as shown. Connect the scale cable to the scale connector on the back of the meter at the scale icon. T ighten the screws to ensure a secure connection. Lock Class Funds Menu *#_ GHI PQRS Back ABC JKL TUV Space DEF MNO WXYZ Shift .
Installation Part 2 - Set Up Meter 12 Install Ink Cartridge 9 A 1. Press the Enter key on the control panel. 2. Lift the cover . NOTE: If the carriage is not visible close the cover and press Enter . 3. Press unlock symbol to open cartridge cover . Add ink cartridge.
10 Installation Part 2 - Set Up Meter 12 Install Ink Cartridge (continued) Remove new cartridge from plastic bag. B Remove silver foil strip from bottom of ink cartridge. C D Install new cartridge into machine. FRONT DEVANT FRONT DEVANT FRONT DEVANT FRONT DEVANT Press ink cartridge cover near the front edge to lock the cartridge in place.
11 Installation Part 2 - Set Up Meter 13 Create a T est Print When prompted, insert a spare envelope or a tape sheet for a test print. A TTENTION T o print correctly , insert tape or envelope against the rear and side walls. The system will detect the envelope and automatically begin printing.
Installation Part 2 - Set Up Meter 14 Checking Y our Account Balance and Adding Postage to Y our System 12 When your meter has successfully connected to the Pitney Bowes Data Center , your account balances will display .
Installation Part 2 - Set Up Meter 15 16 Updating Y our Software Congratulations! Y our meter is operational 13 After loading postage into your system, the meter will automatically download any relevant updates. Y ou will see the screen displaying the status of the update.
.
15 Contact List If Y ou Need Assistance • Product Name: mailstation™ or mailstation 2™ or Communication Device with pbWebConnect • For Setup or Getting Started questions go to: www .pb.com/support /LAN or call 1-800-522-0020 • For Product support go to: www .
.
17 Alternative Method: Using Analog Phone Line Connect the phone cord to the meter and the other end to an analog phone line. The following are usually analog lines: •Faxlines •Linesus.
18 Alternative Method: Using Analog Phone Line 2 Install scale Position the scale on top of the meter as shown. Connect the scale cable to the scale connector on the back of the meter at the scale icon. T ighten the screws to ensure a secure connection.
19 Alternative Method: Using Analog Phone Line 3 Connect Power (continued) 4 Install Ink Cartridge A 1. Press the Enter key on the control panel. 2. Lift the cover . NOTE: If the carriage is not visible close the cover and press Enter . 3. Press unlock symbol to open cartridge cover .
20 Alternative Method: Using Analog Phone Line Remove new cartridge from plastic bag. B Remove silver foil strip from bottom of ink cartridge. C D Install new cartridge into machine. 4 Install Ink Cartridge (continued) 4. Remove and discard the yellow insert.
Alternative Method: Using Analog Phone Line 21 5 Create a T est Print When prompted, insert a spare envelope or a tape sheet for a test print. A TTENTION T o print correctly , insert tape or envelope against the rear and side walls. The system will detect the envelope and automatically begin printing.
Alternative Method: Using Analog Phone Line 22 5 Create a T est Print Good test print - no missing inside lines Poor test print - missing inside lines NOTE: The test print will appear in red ink. If the test print is poor , press no to perform additional printer maintenance and print another test image.
23 Alternative Method: Using Analog Phone Line Connect the Communication Device to your Internet source 7 Checking Y our Account Balance and Adding Postage to Y our System When your meter has successfully connected to the Pitney Bowes Data Center , your account balances will display .
24 Alternative Method: Using Analog Phone Line 9 Congratulations! Y our meter is Operational Y our system is now ready to use. Also use the Quick Reference Guide under your meter for How T o’s on: .
25 Alternative Method: Using Analog Phone Line T roubleshooting No Dial T one - Check that you are using an analog line such as a) most fax machine lines b) lines used by computer modem or credit card.
26 If Y ou Need Assistance • Product Name: mailstation™ or mailstation 2™ or Communication Device with pbWebConnect • For Setup or Getting Started questions, call 1-800-522-0020 • For Product support go to: http://support.pb.com/K700 or http://support.
.
1 Elmcroft Road Stamford, Connecticut 06926-0700 www .pitneybowes.com For Service or Supplies Support Web Site: http://support.pb.com/K700 http://support.pb.com/K7M0 Product Customer Support: 1(800) 522-0020 Product Name: mailstation™ / mailstation 2™ / Communication Device with pbWebConnect Model Number: K700 / K7M0 A W31214 Rev .
デバイスPitney Bowes K700. K7M0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Pitney Bowes K700. K7M0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPitney Bowes K700. K7M0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Pitney Bowes K700. K7M0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Pitney Bowes K700. K7M0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Pitney Bowes K700. K7M0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPitney Bowes K700. K7M0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Pitney Bowes K700. K7M0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPitney Bowes K700. K7M0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
