Planet TechnologyメーカーADE-4000の使用説明書/サービス説明書
ページ先へ移動 of 56
Networkin g & Comm u nicatio n 4-Port Ethernet ADSL Modem Router A DE-4000 User ’ s Manual.
ii Cop y right Copyright (C) 2002 PLANET Technology Corp. All rights reserved. The products and programs described in this User ’ s M anual are licensed products of PLANET Technology, This User ’ .
iii Trademarks The PLANET logo is a trademark of PLANET Technology. This documentation may refer to numerous hard w are and soft w are products by their trade names. In most, if not all cases, these designations are claimed as trademarks or registered trademarks by their respective companies.
.
i T A BLE OF C ONTENTS CH A P T ER 1 IN T RODUC T IO N ..................................................................................... .1 A DE-4000 Feature s .......................................................................................
ii W indo w s X P ............................................................................................ . 36 M acintosh Client s .............................................................................................. . 37 Linux Client s .
1 Chapter 1 Introduction This Chapter provides an overview of ADE-4000's features and capabilities. Congratulations on the purchase o f ADE-4000. T he ADSL Bridge Router w ill allo w m ultiple LAN users to share an Internet user account, via a DSL connection.
ADE-4000 User Manual 2 A d v anced Functions • Virtual Servers. T his f eature allo w s Internet users to access Internet servers on y our LAN. T he required setup is quic k and eas y . • DMZ. One (1) PC on y our local LAN can be con f igured to allo w unrestricted 2- w a y co mm unication w ith Servers or individual users on the Internet.
Introduction 3 Ph y sical Details Front Panel T he f ront panel o f ADE-4000 has 2 LEDs f or one LAN port and one ADSL port. Figure 2 displa y s a f ront panel o f the router.
ADE-4000 User Manual 4 into the ris k o f creating IP address con f lict bet w een y our PC and the router. In such a case, y ou m a y be co m pelled to reboot y our entire s y ste m (s).
5 Chapter 2 Ins t allation This Chapter covers the physical installation of ADE-4000. S y stem Requirements Co m puter • PC or T CP/IP co m pliant w or k stations • 32 MB RAM • 20 MB o f f ree d.
ADE-4000 User Manual 6 I f required, use a standard LAN cable to connect the "Uplin k " port to a standard port on another hub. Step 3 Connect W A N Cable Connect one end o f the RJ-11 phone cord to the LINE port on y our ADSL m ode m . Connect the other end o f the RJ-11 phone cord to y our w all phone jac k .
Login And Syste m Status 7 Chapter 3 Login And S y stem S t atus This Chapter details the first time login procedure and the Status screen Login ADE-4000 contains an H TT P server. T his enables y ou to connect to it, and con f ig- ure it, using y our W eb Bro w ser.
ADE-4000 User Manual 8 Figure 3-1: Logon W indow If y ou can't connect I f ADE does not respond, chec k the f ollo w ing: • Machine is properl y installed, LAN connection is OK, and it is po w ered ON. Y ou can test the connection b y using the "Ping" co mm and: • Open the MS-DOS w indo w or co mm and pro m pt w indo w .
Login And Syste m Status 9 Status Home Once y ou login in ADE-4000, its Ho m e page w ill appear. It sho w s the f ir m w are versions and W AN and LAN inter f ace status. Figure 3-2: Home page A DSL T he A DSL Status page sho w s the ADSL ph y sical la y er status.
ADE-4000 User Manual 10 L A N T he L A N page sho w s the in f or m ation and status o f LAN port, DHCP client table, lin k ing status o f Ethernet and USB inter f ace.
11 Chapter 4 S y stem Configuration This Chapter details the configurations for ADE-4000 O v er v ie w T his chapter describes the setup procedure f or: • W AN Access • LAN con f iguration PCs on y our local LAN m a y also require con f iguration.
ADE-4000 User Manual 12 Per VC Setting Under Per VC Setting , it provides the con f igurations f or IP address and VPI/VCI. Figure 4-2: Per VC Settings T o s w itch bet w een the PVCs, please choose the options o f virtual circuit and clic k on the Submit button to s w itch over.
Syste m Configuration 13 Figure 4-5: Encapsulation types of Bridge mode Step 2 Clic k “ submit ” to co mm it m odi f ications y ou ’ ve done, then clic k “ Sa v e Configura- tion ” to store settings. (Modi f ications w ill not ta k e e ff ects until next reboot.
ADE-4000 User Manual 14 PPPoE, PPPo A Connection for W A N (Routing mode) I f PPPoE (Point-to-Point Over Ethernet) or PPPoA (Point-to Point Over A T M) is provided to establish co mm unications, User Name and Pass w ord are required to be obtained f ro m ISP.
Syste m Configuration 15 Figure 4-8: PPP setting Screen Step 3 Clic k on “ N AT ” tab on le f t panel, and enable the N A PT f unction in the option m enu. Step 4 Clic k “ Sa v e settings ” on le f t panel to w rite con f iguration into m achine, and reboot to m a k e settings e ff ective.
ADE-4000 User Manual 16 Figure 4-9: Fixed IP set-up screen Step 2 Choose suitable pac k et encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/ Routed Mux, Classical IP over A T M).
Syste m Configuration 17 Figure 4-10: DHCP client enable Step 3 Clic k on “ N AT ” tab on le f t panel, and enable the N A PT f unction in the option m enu. Step 4 Clic k “ Sa v e settings ” on le f t panel to w rite con f iguration into m achine, and reboot to m a k e settings e ff ective.
ADE-4000 User Manual 18 Support IGMP prox y /rela y f unction f or ADSL m ode m , based on the f ollo w ing re- quire m ent and case: On CO side, • there m ust be at least one IGMP querier (router) present. IGMP querier w ill send IGMP quer y pac k et.
Syste m Configuration 19 T able 4-1 W AN con f igurations Overvie w Note : Encapsulation is based on the ISP con f iguration. It m a y be di ff erent f or di ff erent ISPs and countries.
ADE-4000 User Manual 20 L A N Configuration T he LAN IP and Subnet Mas k o f ADE-4000 are the values seen b y the users on their internal net w or k . T he de f ault IP is 10.
Syste m Configuration 21 Figure 4-14: DHCP server settings • Ethernet M ode Setting: B y clic k ing this lin k , y ou w ill be directed to Ethernet Mode page. Y ou can speci f y the t y pe o f LAN connection or use AutoSense. De f ault is AutoSense.
ADE-4000 User Manual 22 Figure 4-16: NAT configuration Enter the session na m e y ou w ant to use f or NA T . Select VC nu m ber, w hich is assigned to the session. Choose A dd , and then clic k Submit button, the ne w de f ined session should be added to the table belo w i mm ediatel y .
Syste m Configuration 23 T hree t y pes o f N AT (Net w or k Address T ranslation) service are provided b y ADE- 4000. N A T N AT option onl y m aps single W AN IP address to the local PC IP address. T his is peer-to-peer m apping (1 on 1). For each PVC, onl y one local PC IP address can be associated w ith each W AN PVC.
ADE-4000 User Manual 24 Figure 4-19: Enter Session name and User ’ s IP A f ter all these settings are done, clic k “ Submit ” button, the record w ill be added to the table belo w i mm ediatel y .
Syste m Configuration 25 Virtual Ser v ers Virtual server f eature allo w s users to m a k e Servers on y our LAN accessible to Internet users. Nor m all y , Internet users w ould not be able to access a server on y our LAN because o f native NA T protection.
ADE-4000 User Manual 26 Figure 4-21: Virtual Server Configuration Screen Bridge Filtering T he Bridge Filtering con f iguration page allo w s y ou to set the con f iguration o f IP f iltering. Y ou can add 4 records m ax. Source M A C W hen the bridge f iltering is enabled, enter the Source M A C address , select Block and clic k A dd .
Syste m Configuration 27 Figure 4-22: Bridge Filtering Screen DNS Configuration T he DNS Configuration page allo w s y ou to set the con f iguration o f DNS prox y . ADE-4000 supports the DNS prox y f unction. For the DHCP requests f ro m local PCs, the DHCP server w ill set the LAN port IP as the de f ault DNS server.
ADE-4000 User Manual 28 PPP configuration Select the PPP lin k under Con f iguration colu m n to set up PPP con f iguration. PPP con f iguration provides centrali z ed PPP session m anage m ent, up to 16 session con f igurations can be stored into ADE-4000 to m eet various k ind o f connection environ m ent.
Syste m Configuration 29 M RU MRU stands f or Maxi m u m Receive Unit. MRU value m a y be sent to in f or m the peer that the i m ple m entation can receive larger pac k ets, or to request that the peer send s m aller pac k ets. I f there is no special de m and, leave this de f ault value MT U M T U stands f or Maxi m u m T rans m ission Unit.
ADE-4000 User Manual 30 Chapter 5 PC Configuration This Chapter details the PC Configuration required on the local ("In- ternal") LAN. O v er v ie w For each PC, the f ollo w ing m a y to be.
Syste m Configuration 31 Windo w s 9x/ME 1. Select Control Panel - Network . Y ou should see a screen li k e the f ollo w ing: Figure 5-1: Network Configuration 2. Select the TCP/IP protocol f or y our net w or k card. 3. Clic k on the Properties button.
ADE-4000 User Manual 32 Figure 5-3: Gateway Tab ( W in 95/98) • On the DNS Configuration tab, ensure Enable DNS is selected. I f the DNS Server Search Order list is e m pt y , enter the DNS address provided b y y our ISP in the f ields beside the Add button, then clic k Add .
Syste m Configuration 33 Figure 5-5: Network Configuration ( W in 2000) 3. Select the TCP/IP protocol f or y our net w or k card. 4. Clic k on the Properties button.
ADE-4000 User Manual 34 Figure 5-6: TCP/IP Properties ( W in 2000) 5. Ensure y our T CP/IP settings are correct: Using DHCP T o use DHCP, select the radio button Obtain an IP Address automatically . T his is the de f ault W indo w s settings. Restart y our PC to ensure it obtains an IP Address f ro m ADE-4000.
Syste m Configuration 35 Windo w s XP 1. Select Control Panel - Net w or k Connection. 2. Right clic k the Local Area Connection and choose Properties . Y ou should see a screen li k e the f ollo w ing: Figure 5-7: Network Configuration ( W indows XP) 3.
ADE-4000 User Manual 36 Using DHCP T o use DHCP, select the radio button Obtain an IP Address automatically . T his is the de f ault W indo w s settings.
Syste m Configuration 37 M acintosh Clients Fro m y our Macintosh, y ou can access the Internet via ADE-4000. T he procedure is as f ollo w s. 1. Open the T CP/IP Control Panel. 2. Select Ethernet f ro m the Connect via pop-up m enu. 3. Select Using DHCP Server f ro m the Configure pop-up m enu.
38 Chapter 6 Admin Privilege This Chapter details the operation of ADE-4000 and the status screens. T he lin k s under A dmin Pri v ilege are onl y to be accessed and con f igured, w hen it is login w ith ad m inistrator login na m e and pass w ord. W A N Status T he W A N Status page sho w s the in f or m ation and status o f W AN PVCs.
Ad m in Privilege 39 Figure 6-2 : AT M Status Screen PPP Status T he PPP Status page sho w s the status o f PPP f or each PVC. Connect and Dis- connect allo w s y ou to m anuall y connect/disconnect the PPP connection f or speci f ied PVC.
ADE-4000 User Manual 40 TCP Status T he T CP Status page sho w s the statistics f or all T CP connections. T his is f or internal net w or k onl y . Figure 6-4: TCP Status Screen Route Table T he Route T able page displa y s routing table and allo w s y ou to m anuall y enter the routing entr y .
Ad m in Privilege 41 Learned M A C Table T he Learned M A C T able page sho w s the current learned Bridge MAC table. T he A ging T imeout is f or deter m ining the update period f or the MAC table. Figure 6-6: Learned M AC Table Screen A DSL Configuration T he A DSL Configuration page allo w s y ou to set the con f iguration f or ADSL proto- cols.
ADE-4000 User Manual 42 Figure 6-7: ADSL Configuration Screen RIP Configuration RIP Configuration allo w s users to setup RIPv1/v2 support and related para m eters in ADE-4000. RIP Start or Stop a RIP session. T he resulting RIP session w ill m onitor all net w or k inter f aces that are currentl y available f or m essages f ro m other RIP routers.
Ad m in Privilege 43 Figure 6-8: RIP Configuration Screen Pass w ord Configuration T he Pass w ord Configuration page allo w s users to set the pass w ords f or user and ad m inistrator.
ADE-4000 User Manual 44 M iscellaneous Configuration T he M iscellaneous Configuration allo w s users to set all the m iscellaneous con f igurations in ADE-4000.
Ad m in Privilege 45 W A N side H TT P ser v er W hen it is enabled, the W eb setting pages o f ADE-4000 can be accessed f ro m the W AN side. Users can li m it the ad m inistration privileges to a speci f ied IP address or li m it to LAN side user.
ADE-4000 User Manual 46 PPP connect on W A N access I f enabled, the PPP session w ill be auto m aticall y established w hen there is a pac k et w ants to go out the W AN. T he di ff erences bet w een PPP connect on W AN access and the Auto m atic Recon- nect: So m e ISPs w ould ter m inate the PPP session due to the inactivit y .
Ad m in Privilege 47 Code Image Update T he Code Image Update page allo w s y ou to upgrade the i m age code locall y . Bro w se the location o f f ir m w are f ile, and clic k the Upload to start the update. Net w ork Code Image Update T he Net w ork Code Image Update page allo w s user to upgrade the i m age code f ro m re m ote F T P server.
48 A ppendix A T roubleshooting This Appendix covers the most likely problems and their solutions. O v er v ie w T his chapter covers so m e co mm on proble m s that m a y be encountered w hile using ADE-4000 and so m e possible solutions to the m .
Appendi x A - Troubleshooting 49 I reconnect it? A ns w er 2 Y ou have to go to the PPP Status under Ad m in Privileged colu m n, choose the correct PVC and Connect option, and then clic k Execute to restart a ne w PPP secession.
50 A ppendix B S pecifications A DE-4000/ A DE-4000B Model ADE-4000/ADE-4000B Di m ensions 172 mm ( W ) * 100 mm (D) * 24 mm (H) Operating T e m- perature 0 ° C to 40 ° C Storage T e m pera- ture -1.
デバイスPlanet Technology ADE-4000の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Planet Technology ADE-4000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPlanet Technology ADE-4000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Planet Technology ADE-4000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Planet Technology ADE-4000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Planet Technology ADE-4000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPlanet Technology ADE-4000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Planet Technology ADE-4000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPlanet Technology ADE-4000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
