Planet TechnologyメーカーFGSW-1828PSの使用説明書/サービス説明書
ページ先へ移動 of 72
User's Manual FNSW-1608PS FGSW-1828PS 16-Port 10/100Mbps Web Smart PoE Switch - 1 -.
- 2 - Trademarks Copyright © PLANET Technology Corp. 2008. Contents subject to revisi on w ithout prior notice. PLANET is a registered trademark of PLANET Technology Corp.
- 3 - TABLE OF CONTENTS 1. INTRODUCTION ............................................................................................................ 5 1.1 C HECKLIST .....................................................................................
- 4 - 5.5 A UTO -N EGOTIATION ............................................................................................................................... .. 63 6. POWER OVER ETHERNET OVERVIEW .......................................................
- 5 - 1. INTRODUCTION 1.1 Checklist Check the contents of your p ackage for follow ing parts: z FNSW-1608PS or FGSW-1828PS x1 z Quick Installation Guide x1 z User's manual CD x1 z Power cord x 1 .
- 6 - 1.3 Features ◆ Complies with the IEEE 802.3, IEEE 802.3u, I EEE 802.3ab, IEEE 802.3z Gi gabit Ethernet standard ◆ 16-Port 10/100Mbps with 8-Port PoE Web Smart PoE Sw itch (FNSW-1608PS) ◆ 1.
- 7 - Dimensions 440 x 120 x 44 mm (1U height) Weight 1.75 kg 2.02 kg Pow er Requirement 100-240V AC, 50-60 Hz, 1A System opera tion Power Con- sumption / Dissipation (Full load) 13.
- 8 - 2. HARDWARE DESCRIPTION This product provides three differ ent running speeds – 10Mbps, 100Mbps and 1000M bps in the same Web Smart PoE Switch and automatically distinguis hes the speed of incoming connection. This section describes the hardware f eatures of Web Smart PoE Switch.
- 9 - 2.2 Rear Panel The rear panel of the Web Smart PoE Switch indicates an AC inlet pow er socket, w hich accepts input power from 100 to 240VAC, 50-60Hz, 1A. 100~240V AC 50 / 60Hz Figure 2-3: FNSW-1608PS / FG SW-1828PS Switch rear panel Pow er Notice: 1.
- 10 - 2.3.2 Rack Mounting To install the Web Smart PoE Switch in a 19-inch standard rack, follow the instructions described below. Step 1: Place your Web Smart PoE Sw itch on a hard flat surf ace, with the front panel posit ioned tow ards your front side.
- 11 - 3. SWITCH MANAGEMENT This chapter describes how to manage the Web Smart PoE Sw itch. T opics include: - Overview - Management method - Logging on to the Web Smart PoE Switch 3.1 Overview The Web Smart PoE Switch provides a user-friendly, Web interf ace.
- 12 - 3.2.2 PLANET Smart Discovery Utility You can manage the Web Smart PoE Switch remotely by havi ng a remote host w ith Web browser, such as Microsoft Internet Explorer or Netscape Navigator. Using this management method: The Web Smart PoE Switch must have an Internet Protocol (IP) address accessible for the remote host.
- 13 - 4. This utility show all necessary information from the devic es, such as MAC Address, De vice Name, firmware version, Device IP Subnet address, also can assign new passw ord, IP Subnet address and description for the devices.
- 14 - 4. WEB MANAGEMENT To modify y our PC’s IP domain to the same with W eb Smart PoE Switch then use the default IP address ( 192.168.0.100 ) to remote configure Web Smart PoE Switch through the We b interface.
- 15 - The Switch Menu provide eight majo r management functions, the screen in Figure 4-2 appears. Figure 4-2 Web Main Menu Screen These items and its description shown as below : ◆ System: Provide System configurati on of Web Smart PoE Sw itch. Explain ed in section 4.
- 16 - 4-2 System This section provides System Information, IP Configurat ion, Passw ord Setting, Alert Trap, Factory Default, Firmware Update and Reboot functions of Web Smart PoE Switch, the screen in Figure 4-3 appears and table 4-1 describes the System object of Web Smart PoE Sw itch.
- 17 - 4.2.1 System Information This section displays the MAC address, Hardware Version, Software Version and System Up Time, also allow define the device description and press “Apply ” button to take affect.
- 18 - 4.2.2 IP Configuration This section provides change the IP Addr ess, Subnet Mask and Gateway , the screen in Figure 4-5 appears. Figure 4-5 IP Configuration Web Page Screen After setup complete and press “Apply ” button to take affect.
- 19 - 4.2.3 Password Setting This section provides change the Username and Password, the screen in Figure 4-7 appears. Figure 4-7 Passw ord Setting Web Page Screen # Notice: Up to 8 characters is allowed for the username and p assword assign.
- 20 - 4.2.4 Alert Trap This section provides Web Smart PoE Switch Alert Trap c onfiguration, such as Disable or enable the trap mode and alert IP address assign the screen in Figure 4-8 appears. The table 4-2 describes the Alert Tr ap object of Web Smart PoE Switch.
- 21 - 4.2.5 Factory Default This section provides reset the Web Smart Po E Switch to factory default mode, the screen in Figure 4-9 appears. Figure 4-9 Factory Default W eb Page Screen Press “Factory Default” button to take affect.
- 22 - 4.2.6 Firmware Update This section provides firmware upgrade of the Web Smart PoE Sw itch, the screen in F igure 4-11 appears. Figure 4-1 1 Firmw are Update Web Page Screen ress “Update” button for start the firmw ar e upgrade process, the screen in Figure 4-12 & 4-13 appears.
- 23 - Figure 4-13 Firmware Update Web page Screen Then the following screen appears, on administrator PC, the screen in Figure 4-14 appears. press “Brow ser” button to find the firmware locati Fi.
- 24 - After find the firmw are location from administrator PC, press “Up date” button to start the firmware upgrade process. The W se wait for a w hile for system reboot.
- 25 - # Notice: Recommend to use IE 6.0 browser for firmw are upgrade process. 4.2.7 Reboot s reboot the W eb Smart PoE Switch, the screen in Figure 4-17 appears. This section allow Figure 4-17 Reboot Web Page Screen ress “Reboot” button to reboot the Web Sm art PoE Switch, the screen in Figure 4-18 appears.
- 26 - Figure 4-18 Reboot Web Page Screen 4-3 Port Management This section provides Port C onfiguration, Port Mirroring, Bandwidth Control, Broadcast St orm Control and Port Statistics from Web Smart PoE Switch, the screen in Figure 4-19 appears and table 4-3 describes the Port Management object of Web Smart PoE Switch.
- 27 - 4.3 iguration Thi etail s table 4-4 & 4-5 n objects of Web Smart PoE Switch. .1 Port Conf s section introduces d ettings of per port on Web Smart PoE Sw itch; the screen in Figure 4-20 &.
- 28 - Figure 4-21 Port Configuration Web Page Screen Table 4-4 Descriptions of the Port Conf iguration Web Page Screen Objects cts Table 4-5 Descriptions of the Port Conf iguration Web Page Screen Ob.
- 29 - 4.3.2 Port Mirroring Thi on introduces detail s Figure 4-22 app 4-6 descript s secti ettings of Port Mirro ring function of Web Smart PoE Sw itch; the screen in ears and table ions the Port Mirroring objects of Web Smart PoE Switch.
- 30 - 4.3.3 Bandwidth Control This section introduces detail settings of Bandwidth C ontrol function of Web Smar t PoE Sw itch; the screen in F igure 4-23 appears and table 4-7 description the Bandwidth Control objects of Web Smart PoE Sw itch.
- 31 - 4.3.4 Broadcast Storm Control This section introduces detail settings of Broadcast Storm Control function of Web Smart PoE Switch; the screen in Figure 4-24 appears and table 4-8 descriptions the Broadcast Storm Contro l objects of Web Smart PoE Sw itch.
- 32 - 4.3.5 Port Statistics This section introduces detail informa tion of Port Statistics function of Web Smart PoE Switch; the screen in Figure 4-25 appears and table 4-9 descriptions the Port Statistics objects of Web Smart PoE Switch.
- 33 - 4-4 VLAN Setting A Virtual LAN (VLAN) is a logical network grouping that limits t he broadcast domain. It allow s y ou to isolate netw ork traffic so only members of the VLAN receive tra ffic from the same VLAN members.
- 34 - 802.1Q Tag User Priority CFI VLAN ID (VID) 3 bits 1 bits 12 bits TPID (Tag Protocol Identifier) TCI (Tag Control Information) 2 bytes 2 bytes Preamble Destination Address Source Ad- dress VLAN .
- 35 - This section provides VLAN Configurati on from Web Smart PoE Switch, the screen in Figure 4-26 appears and table 4-10 describes the VLAN Setting object of Web Smart PoE Switch.
- 36 - 4 This section introduces detail information of IEEE 802. 1Q VLAN function of Web Smart PoE Switch; Choose “802.1Q VLA N” from VLAN from the VLAN Mode and press “A pply” button to enable the 802.1Q VL AN function. The screen in Figure 4-27 & 4-28 appears and table 4-11 description the 802.
- 37 - Table 4-11 Descriptions of the 802.1Q VLAN Setting Screen Objects Figure 4-29 802.1Q VLAN per Port Setting Web Page Screen This section introduces detail informa tion of IEEE 802.1Q VLAN Per Port Se tting of Web Smart PoE Switch; The table 4-12 description the 802.
- 38 - 802.1Q VLAN Setting example: T wo separate 8 w th 2. Each VLAN is traf fic, only the same VLAN member port can receive traffic from each other . 02.1Q VLAN scenario 1. Shows ho e Web Smart PoE Switch. Handles Un t agged and T agged traffic from tw o 802.
- 39 - Setup steps 1. Create VLAN Group: Set VLAN Group 1 = default-VLAN with VID (VLAN ID) =1. Add two VLANs – VLAN 2 and VLAN 3, VLAN Group 2 w ith VID= 2 , VLAN Group 3 with VID= 3.
- 40 - VLAN 2 : Port-1,Port-2 and Port-3 . VLAN 3 : Port-4, Port-5 and Port-6 . VLAN 1: All other ports – Port-7~Port-18. Figure 4-32 Assign VLAN members for VLAN 2 and VLAN 3 Please remember to remove the Port 1 – Port 6 from VLAN 1 membership, since the Port 1 – Port 6 had been assigned to VLAN 2 and VLAN 3.
- 41 - # Notice: ping setting. Its import to remove the VLAN member port from VLAN 1 group. Or the ports w ould become overlap- 3. Assign PVID for each port: Port-1,Port-2 and Port-3 : PVID= 2. Port-4,Port-5 and Port-6 : PVID= 3. Port-7~Port-18: PVID= 1.
- 42 - T wo separate 1. Based on t te VLAN group example above, VLAN 2 and VLAN 3 member port cannot see each other. 2. The member ports from VLAN 2 and VLAN 3 need to access one public server . 802.1Q VLAN w ith overlapping area scenario he two sep ara Figure 4-35 A Server connect to the VLAN overlapping area 1.
- 43 - 3. Define a VLAN 1 as a “Public A rea” that overlapping with both VLA N 2 members and VLA N 3 members . Figure 4-37 VLAN 1 – The public area member assign 4. Setup Port-7 with “ PVID=1 ” at VLAN per Port Conf iguration page. The screen in Figure 4-38 appears.
- 44 - Figure 4-38 Setup Port-7 with PVID-1 rt-3 and VLAN 3 members: Port-4 to Port Although the VLAN 2 members: Port-1 to Po -6 also belongs to VLAN 1. But w ith different PVID settings, packets form VLAN 2 or VLAN 3 is not able to access to the other VLAN.
- 45 - 4.4.2 Port Based VLAN This section introduces detail information of Port Based VLAN function of Web Smart PoE Switch; Choose “Port Based VLA N” from VLAN from the VLAN Mode and press “Apply” button to enable the port based VLAN function.
- 46 - Table 4-14 Descriptions of the Port Based VL AN Configuration Screen Objects Port Based VLAN Setting example: VLAN scenario 1. Port 18 is the file server port for all the workst ations 2. Port 1 to port 17 is different dev ices that do not need to see each other Setup step s 1.
- 47 - 4.4.3 MTU VLAN troduces detail information of MTU VLAN b Smart PoE Switch; Choose “MTU” from VLAN the VLAN Mo The screen in Figure 4-41 appears and description the MT This section in function of We from table 4-15 de and press “Apply ” button to enable the MTU VLAN function.
- 48 - 4-5 Trunk Setting bet ween devices, use the Link aggregation e link aggregation on the dev ices at both ends. When usi ng a port link aggregation, note that: 。 T he ports used in a link aggregation must all be of the same media type (RJ-45, 100 Mbps fiber).
- 49 - This function allows to con member ports. Also provid figuring t he trunk function. It provides up to tw o trunk groups and each trunk group provides 4 e four various Trunk Ha sh Algorithm policies for selection. The screen in Figure 4-42 appears and table 4-16 description the Trunk Setting objects of Web Smart PoE Switch.
- 50 - 4-6 QoS Setting Quality of Service (QoS) is an advanced traffi c prioritization feature that allow s you to establish control over network traffi c. QoS enables you to assign various grades of netw ork service to different types of traffic, such as multi-media, video, protocol-specific, time critic al, and file-backup traffic.
- 51 - 4.6.1 Priority Mode This section introduces detail information of Prio rity Mode of Web Smart PoE Sw itch; the screen in Figure 4-44 appears and table 4-18 descriptions the Priority Mode of Web Smart PoE Switch.
- 52 - 4.6.2 Class of Service Configuration on of Web Smart PoE Switch. This section introduces detail information of Class of Serv ice Configuration of Web Sm art PoE Switch; the screen in Figure 4-4.
- 53 - 4.6.3 TCP / UDP Port Based QoS This section introduces detail information of TCP / UDP Port Based QoS Configuration of Web Smart PoE Switch; the screen in Figure 4-46 & 4-47 appears and table 4-20 descriptions the TCP / UDP Port Based QoS Configuration of Web Smart PoE Switch.
- 54 - Table 4-20 Descriptions of the TCP / UDP Port Based QoS Configuration Screen Objects Object Description Protocol Display different Protocol for define the QoS policy in option FTP(20,21) Provide F-I-F-O, Discard, Low , High options. SSH(22) Provide F-I-F-O, Discard, Low , High options.
- 55 - 4-7 Security Filter ovides Security Filter of Web Smart PoE Sw itch; the screen in Figure 4-48 appears and table 4-21 de- e Security F This function pr scriptions th ilter of Web Smart PoE Switch.
- 56 - 4.7.1 MAC Address Filter ress Filter of Web Smart PoE Switch. This section introduces detail information of MAC Addr ess Filter of Web Smart PoE Switch; the screen in Figure 4-49 appears and ta.
- 57 - 4.7.2 TCP / UDP Filter This section introduces detail information of TCP / UDP Filter of Web Smart PoE Switch; the screen in Figure 4-50 appea and table 4-24 descriptions the TCP / UDP Filter C onfiguration of Web Smart PoE Switch.
- 58 - Table 4-24 Descriptions of the TCP / UDP F ilter Configuration Screen Objects Object Description Function Enable Allow to Disable or Enable the TCP / UDP Filter function. Default mode is Disable . Port Filtering Rule Allow to Forward or Block the Port Filtering Rule.
- 59 - 4-8 Misc Operation This function provides M 4-25 de- itch. isc Operation of Web Smart PoE Switch; the screen in Figure 4-51 appears and table eb Smart PoE Sw scriptions the Misc Operation of W .
- 60 - 4-9 POE Setting Pow er Management: In a power over Ethernet sy stem, operati ng power is applied from a power source (PSU-power supply unit) over the LAN infrastructure to powered devices (PDs), w hich are connected to ports.
- 61 - Table 4-26 Descriptions of the POE Setting Web Page Screen Objects Object Description Pow er limit mode Allow to configure pow er limit mode of W eb Smart PoE Switch. It can choose : Port Priority Deliver PoE pow er by port priority setting Total Limit .
- 62 - 4-10 Logout Web lowing screen appears in Figure 4-53 & 4-54 eb Screen appears. Please re-login the Web Smart PoE Sw This section provide logout func tion on Web Smart PoE Switch, after choose this function and the fol . Please press “Logout” button to take effect and Login W itch for further management.
- 63 - 5. SWITCH OPERATION The Switch is implemented w ith an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This information comes from the learning proce ss of Ethernet Switch.
- 64 - 6. POWER OVER Based on the global standard IEEE 802.3af, PoE is a technology netw carri and Wireless Networking, can help enterpris es improve productivity . It minimizes wi res that must be used to install the netw rk for offering low er cost, and less power failures.
- 65 - The data pairs are used. Since Ethernet pairs are tra center tap of the isolat ion transformer without upsetti and the pair on pins 1 and 2 can be of either polarity. nsformer c oupled at each end, it is possi ble to apply DC power to the ng t he data transfer.
- 66 - 7. THE POE PROVISION PROCESS While adding PoE support to networked devices is relatively pai nless, it should be realized that power cannot simply be transferred over existing CAT-5 cables.
- 67 - 7.3 Start-up h frequencies) woul d introduce noise on the data uring normal operation, the PSE prov ides 44-57 VDC, able to support a minimum of 15.
- 68 - 8. TROUBLESHOOTING net This chapter contains information to help you solve issues. If the Switch is not functioning pr operly, make sure the Ether Switch w as set up according to instructions in this manual. The Link LED is not lit heck the cable connection and remo ve duplex mode of the Switch.
- 69 - APPENDIX A NETW T ORKING CONNECTION A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 B.
- 70 - There are 8 wires on a standard UTP/STP ca and color of straight cable and crossover cable ble and each wire is color-coded. The following show s the pin allocation connection: Straight Cable S.
PLANET TECHNOLOGY CORPORA TION e-mail: sales@planet.com.tw http://www .planet.com.tw EC Declaration of Conformity For the following equipment: *T ype of Pro duct: 16-Port 10/100Base-TX + 2G TP/SFP Combo Web Smart PoE Switch *Model Number: FGSW -1828PS * Produced by: Manufacturer‘s Name : Planet T echnology Corp.
PLANET TECHNOLOGY CORPORA TION e-mail: sales@planet.com.tw http://www .planet.com.tw 1 1F , No. 96, Min Chuan Road, Hsin Tien, T aipei, T aiwan, R. O.C.
デバイスPlanet Technology FGSW-1828PSの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Planet Technology FGSW-1828PSをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPlanet Technology FGSW-1828PSの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Planet Technology FGSW-1828PSの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Planet Technology FGSW-1828PSで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Planet Technology FGSW-1828PSを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPlanet Technology FGSW-1828PSの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Planet Technology FGSW-1828PSに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPlanet Technology FGSW-1828PSデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
