AtmelメーカーSTK502の使用説明書/サービス説明書
ページ先へ移動 of 33
STK502 .................................................................. ............................ User Guide.
.
STK502 User Gu ide i 2528A–AVR–11/02 Table of Contents Section 1 Introduction .......................................................................... ................. 1-1 Section 2 Using the STK502 Top Module ..................................
Table of C ontents ii STK502 User Guide 2528A–AVR–11/02 Section 5 Technical Support .......................... ....................................................... 5-1 Section 6 Complete Schematics ....................................... ......
STK502 User Gu ide 1-1 Rev. 2528A–AVR–11/0 2 Section 1 Introduction The STK502 b oard is a to p module desi gned to add ATmega169 su pport to the STK500 development board from Atm el Corporation. STK502 inclu des connectors and hardware al lowing full uti lization of th e new features of the ATmega 169.
Introduc tion 1-2 STK502 User Guid e 2528A–AVR–11/02 1.1 Features Supports the ATmeg a169 with Built-in LCD Controller. LCD-on-gla ss Display f or Demonstrat ing the ATm ega169 LCD Co nt roller. Supported b y AVR Studio ® 4. Zero Insertion Force Sock et for TQF P Packages.
STK502 User Gu ide 2-1 Rev. 2528A–AVR–11/0 2 Section 2 Using the STK502 Top Module This section des cri be s in detail how the STK50 2 is used with the STK500. 2.1 Connecting the STK502 to the STK500 Starter Kit Connect STK502 to the STK500 expansion header 0 and 1.
Using th e STK502 To p Mo dule 2-2 STK502 User Guid e 2528A–AVR–11/02 Figure 2-2. Pin1 on ZIF Socket a nd TQFP Footprint Caution: Do not mount an AT mega169 on the STK5 02 at the same time as an AVR is mounted on the STK500 board . Neither of the devices wil l work as intend ed.
Using the STK50 2 To p Mod ul e STK502 User Gu ide 2-3 2528A–AVR–11/02 Figure 2-4. PORTG/RST 2.2.2.1 PG0 - PG5 These are gene ral I/O ports co nnected to ZIF s ocket and the TQFP footprint. 2.2.2.2 RST On the ATmega169 the RESET -si gnal and PG5 share the s ame pin.
Using th e STK502 To p Mo dule 2-4 STK502 User Guid e 2528A–AVR–11/02 2.3 Programming the ATmega169 The ATmega169 can be programmed using both SPI a nd High-voltage Parallel Pro- gramming. This sec tion will expla in how to connect the prog ramming cable s to successf ully use one of th ese two modes.
Using the STK50 2 To p Mod ul e STK502 User Gu ide 2-5 2528A–AVR–11/02 2.3.2 High-voltage Programming Figure 2 -7. High-vol tage (Parallel ) Programming To program the ATm ega169 using High-v oltage (Parallel) Programm ing, connect the PROGCTRL to PORTD and PROGDATA to PORT B on the STK500 as shown in Figure 2-7.
Using th e STK502 To p Mo dule 2-6 STK502 User Guid e 2528A–AVR–11/02 2.4 JTAG Connector Figure 2-8 s hows how to co nnect the J TAG ICE probe on t h e STK502 board. Figure 2-8. Co nnecting JTAG ICE to the ST K502 The JTAG conne ctor is used for the ATmega169 bu ilt-in JTAG interfac e.
Using the STK50 2 To p Mod ul e STK502 User Gu ide 2-7 2528A–AVR–11/02 2.5 LCD Display STK502 includ es a LCD dis play. It featu res six 14-se gments digi ts, and some additional segments. All in all the display supports 120 segments. The display is designed for 3V operating v oltage.
Using th e STK502 To p Mo dule 2-8 STK502 User Guid e 2528A–AVR–11/02 Figure 2-11. Pin out for LCD Headers This hardware configuration will give a certai n bit-mapping be tween the bits in the ATmega169 LCDDRx Register and the segments on the STK5 02 LCD.
Using the STK50 2 To p Mod ul e STK502 User Gu ide 2-9 2528A–AVR–11/02 Figure 2-12. Jump er to connect COL1 to COL 2 Figure 2-13. Default L CD-segment configuration , with and without the jumper s.
Using th e STK502 To p Mo dule 2-10 STK502 User Guid e 2528A–AVR–11/02 2.6 TOSC Switch Figure 2-14. TOSC Switch On the ATmega169 the TOSC1 and TOSC2 lines are shared with XTAL1 and XTAL2. The TOSC switc h selects whether the 32 kHz cry stal on the STK50 2, or the XT1/XT2 signals fro m STK500 should be connec ted to these pi ns on the d evice.
Using the STK50 2 To p Mod ul e STK502 User Gu ide 2-11 2528A–AVR–11/02 2.7 Sensor Figure 2-16. NTC-thermistor STK502 includes a t wo screw-termin al block where a sensor ca n be connected. The STK502 kit is shipped with a NTC-thermistor attached to this screw-terminal.
Using th e STK502 To p Mo dule 2-12 STK502 User Guid e 2528A–AVR–11/02 2.7.1.1 AREF Switch The switch n amed AREF se lects the inpu t to the AREF-pin on the ATmega1 69. Figure 2-18. AREF Swi tch Positions: AREF: In this positi on the AREF from the STK500 is co nnected to t he AREF pin on the ATmega 169.
STK502 User Gu ide 3-1 Rev. 2528A–AVR–11/0 2 Section 3 Troubleshooting Guide Table 3-1. Troubleshootin g Guide Proble m Reason Solution Nothing is displa ye d on the LCD. The LCD is not connec ted. Attach the 3 4-pins ca ble between the to 34-pins head er s on the STK502.
Troublesh oo tin g Guide 3-2 STK502 User Guid e 2528A–AVR–11/02 Note: 1. See the ap plication not e “AVR065: LC D Driver for t he STK502 LC D” on how to co n- trol the LCD- display or the the appli cation note “AVR064: ST K502 – A Temperatur e Monitoring System with LCD Output ”.
STK502 User Gu ide 4-1 Rev. 2528A–AVR–11/0 2 Section 4v Technical Specifications System Unit Physical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 x 119 x 27 mm Weight . . . . . . . . . . . . . . . . . .
Technica l Specification s 4-2 STK502 User Guid e 2528A–AVR–11/02 Figure 4-1. L ayout for the STK5 02 LCD-display.
Technic al Specifi cations STK502 User Gu ide 4-3 2528A–AVR–11/02 4.1 STK502 LCD Bit Mappings The LCD Data Registers (LCDDRx ) in the ATmega169 are org anized in grou ps accord- ing to the use of Back plane Control Lines (also kno wn as Common Li nes).
Technica l Specification s 4-4 STK502 User Guid e 2528A–AVR–11/02 4.1.5 A lphanumeric Digit Number Six The bit map pings for the al phanumeric digit numbe r six are listed below. 4.1.6 A lphanumeric Digit Number Seven The bit mappin gs for the al phanumeric dig it number se ven are lis ted below.
STK502 User Gu ide 5-1 Rev. 2528A–AVR–11/0 2 Section 5 Technical Support For Techn ical sup port, plea se conta ct avr@at mel.co m. When re questin g technic al sup- port, please include the f ollowing info rmation: Which target AVR d evice is used (c omplete part nu mber).
Technica l Support 5-2 STK502 User Guid e 2528A–AVR–11/02.
STK502 User Gu ide 6-1 Rev. 2528A–AVR–11/0 2 Section 6 Complete Schematics On the foll owing page s the comple te schemati cs and assemb ly drawin g of the STK502 revision B are sh own .
Complete Schematics 6-2 STK502 User Guid e 2528A–AVR–11/02 Figure 6-1. S chematics, 1 of 3 1 2 3 4 5 6 78 A B C D 8 7 6 5 4 3 2 1 D C B A A9903.3.1020.B MCU.Sch 13 27-Aug-2002 16:12:06 STK502 add-on card for ATmega169, SOCKETS ATMEL Norway Vestre Rosten 78, 7075 TILLER NORWAY PAGE: of TITLE: Document number: Revision: B Date: PAT[7.
Complete Sche matics STK502 User Gu ide 6-3 2528A–AVR–11/02 Figure 6-2. S chematics, 2 of 3 1 2 3 4 5 6 78 A B C D 8 7 6 5 4 3 2 1 D C B A A9903.3.
Complete Schematics 6-4 STK502 User Guid e 2528A–AVR–11/02 Figure 6-3. S chematics, 3 of 3 1 2 3 4 5 6 78 A B C D 8 7 6 5 4 3 2 1 D C B A A9903.3.1020.
Complete Sche matics STK502 User Gu ide 6-5 2528A–AVR–11/02 Figure 6-4. A ssembly Drawing, 1 of 1.
Complete Schematics 6-6 STK502 User Guid e 2528A–AVR–11/02.
Printed on recy cled paper. 2528A–AVR–11/02 /0M © Atmel Corporation 2002. Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in At mel’s Terms and Conditions located on the Company’s web site.
デバイスAtmel STK502の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Atmel STK502をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAtmel STK502の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Atmel STK502の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Atmel STK502で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Atmel STK502を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAtmel STK502の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Atmel STK502に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAtmel STK502デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。