PocketWizardメーカーPocket Wizard Plus IIIの使用説明書/サービス説明書
ページ先へ移動 of 16
Quick Guide FCC/IC: 340.00 - 354.00 MHz CE: 433.42 - 434.42 MHz IMPORT ANT : FCC/Canada frequency radios are NOT compatible with CE frequency radios and vice versa. P ocketWizard.com/wheretobuy/frequency The Plus III is a radio transceiver , capable of acting as a transmitter or receiver for triggering remote ashes and cameras.
Internal Antenna (PG. 13) Backlit LCD (PG. 4) T est Button (T wo Stage T rigger) (PG. 12) Power/MODE Button (PG. 5) Zone T oggle Buttons (A, B, C, D) (PG.
INCLUDED IN BOX: Lanyard Loop USB Connector (PG. 12) Flash/Camera Port (PG. 5, 6, 7, 8) Battery Door Latch Battery Door (PG. 4) 1/4 - 20 Mount T r ansceiver • Plus III T ransceiver • Locking PC Sync Cable • Lany ard • 3.5mm (1/8” Miniphone) Cable • Quick Guide • 6.
T r ansceiver Battery Level (PG. 4) Channel (PG. 11) T riggering Mode (PG. 9, 10) Half/Full Press Indicator (PG. 7, 12) Selected Zones (PG. 11) Note proper polarity when installing batteries. • Always turn OFF all equipment (PocketWizard ® radios, electronic ashes, cameras, etc.
T r ansceiver Connecting: Connect a Plus III to your camera via the hot shoe. This will be your transmitting radio. Connect a Plus III to each of your remote ashes using the appropriate sync cable. Th es e w il l b e yo ur re ce iv i ng r ad i os .
T riggering a Remote Flash with your Plus ® III T ransceiver Remote Flash T riggering 1. Attach a Plus III to your camera’ s hot shoe. Y ou may also connect the Plus III radio to your camera’ s PC sync port using the included cable. 2. Connect a Plus III to your remote ash via the appropriate sync cable.
7 Remote Camera T riggering T riggering a Remote Camera with your Plus ® III T ransceiver 1. Connect Plus III to your remote camera via the appropriate remote camera cable. 2. Select Channel and Zone A, B, C, or D via the Channel Up/Down Buttons and Zone T oggle Buttons.
Using Auto-Relay 1. Set the transmitting PocketWizard radio in your hands to a desired channel and zone. 2. Set the relaying Plus III for your remote camera to the same ch an n el as the radio in your hands and set T riggering Mode to TxRx .
T riggering Modes Modes of Operation Y our Plus ® III T ransceiver supports six modes of triggering for different applications. Y ou can switch between modes by pressing and quickly releasing the MODE button. TxRx Mode allows the radio to be used as a transmitter attached to a camera or as a receiver connected to a rem ote ash or remote camera.
T riggering Modes and receiving radios. Use this mode when triggering remote cameras at greater distances. It can also be used with remote ash, but there may be a reduction in maximum X-sync speed.
Channels Using Zones The Plus ® III T ransceiver supports 32 different Standard Channels. Each Standard Channel represents a digital code transmitted on specic PocketWizard radio frequencies. This enables many photographers to work in the same area or for one photographer to exclusively control different sets of receivers.
Other Functions Status LED TEST Button (T wo Stage T rigger) Reset USB The Plus III’ s status LED will blink in three different colors: Green, Red and Amber .
Whenever possible, maintain a line of sight between radios and keep antennas parallel. Make sure radios are not near any large metal, concrete, or high water -content objects. People and trees are mostly water! Make sure radios are not blocked by these objects or by hills.
Specications T echnical Information Frequency: Plus ® III FCC/IC: 340.00 – 354.00 MHz Plus ® III CE: 433.42 – 434.42 MHz T ransmit Output Power: Less than 1 milliwatt (1/1000 of a watt) Batte.
P ocketWizard.com Information in this Quick Guide is subject to change. For current operatingdocumentation, features, specicationsandcompatibility , visit wiki.PocketWizard.com. © 2011 LPA Design. All rights reserved. Product features and specications are subject to change without notice.
10937 v1.0 WARNING The FCC wants you to know: Cha ngesormodicationstothisunitnotexpresslyapprovedb ythe partyresponsibleforcompliancecouldvoidtheuser’ sauthorityto operatethisequipment.
デバイスPocketWizard Pocket Wizard Plus IIIの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
PocketWizard Pocket Wizard Plus IIIをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPocketWizard Pocket Wizard Plus IIIの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。PocketWizard Pocket Wizard Plus IIIの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。PocketWizard Pocket Wizard Plus IIIで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
PocketWizard Pocket Wizard Plus IIIを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPocketWizard Pocket Wizard Plus IIIの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、PocketWizard Pocket Wizard Plus IIIに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPocketWizard Pocket Wizard Plus IIIデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
