PolycomメーカーXS-3700の使用説明書/サービス説明書
ページ先へ移動 of 19
June 2008 Edition 1725-36061-001 Version C VIEW Certified Configuration Guide Xirrus Wi-Fi Array XS-3500/3700/3900.
Configuration Guide 2 PN: 1725-36061-001_C.doc Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 3 Introduction Polycom’s Voice Interoperability for Enterprise Wireless (VIEW) Certification Program is designed to ensure interoperability and high performance between SpectraLink Wireless Telephones and Xirrus Wi-Fi Array infrastructure products.
Configuration Guide 4 PN: 1725-36061-001_C.doc Known Limitations Voice quality may be impaired in an environment with heavy wireless TCP traffic, such as FTP data transfers. Access Point Capacity and Positioning Please refer to the Polycom Deploying Enterprise-Grade Wi-Fi Telephony white paper.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 5 Network Topology The following topology was used for VIEW Certification testing..
Configuration Guide 6 PN: 1725-36061-001_C.doc Configuration Settings Xirrus Arrays initially boot with all radios disabled except for the monitor radio. The monitor radio may be left enabled and in no way interferes with the SpectraLink Wireless Telephones; however it was disabled for the certification process for simplicity.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 7 The monitor radio may also be disabled with the Web Management Interface (WMI) as shown below. 1. In the navigation pane, click IAP Settings . 2. In the IAP Settings screen, clear the Enabled check box for IAP abg2 .
Configuration Guide 8 PN: 1725-36061-001_C.doc Setting Radio Channels With the SpectraLink Wireless Teleph ones operating in 802.11b mode, at least one of the Wireless LAN Array’s Integrated Access Points (IAPs) must be set to the 2.4 GHz band. Any of th e Array’s four abg radios may be used, and up to three may be used simultaneously.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 9 Configuring an SSID An SSID for the phones must be set on the Array. The following CLI commands show how to implement an SSID called ‘spec’.
Configuration Guide 10 PN: 1725-36061-001_C.doc This screen shows how to set up the SSID in the WMI. 1. In the navigation pane, click SSID Managemen t . 2. Type the name in the New SSID Name : field near the top of the SSID Managemen t screen. 3. Click the Create button in the upper right corner of the screen.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 11 Setting Radio Cell Size The radio transmit powers and receive sensitivities should be set appropriately for the environment in which they are operating. The simplest way to do this is to pick an operating cell size for them.
Configuration Guide 12 PN: 1725-36061-001_C.doc This screen shows how to set the cell size and en able the radios via the IAP Settings page of the WMI. 1. In the navigation pane, click IAP Settings . 2. In the IAP Settings page, click the Enabled check box for each radio you wish to enable.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 13 Security Enabling WPA-PSK For WPA-PSK mode, the global encryp tion cipher method must be set to TKIP with the following CLI commands:.
Configuration Guide 14 PN: 1725-36061-001_C.doc This screen shows how the global encryption cipher can be set through the WMI. 1. In the navigation pane, click Global Set tings . 2. In the Global Settings screen, click the Yes option on the TKIP Enabled line.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 15 Setting the Pre-Shared Key The pre-shared key must be provided next. In the example below the passphrase is set to ‘11111111’ .
Configuration Guide 16 PN: 1725-36061-001_C.doc This screen shows how to set the encryption and passphras e in the SSID Management page of the WMI. 1. In the navigation pane, click SSID Managemen t . 2. Select the correct SSID from the lis t at the center top of the page.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 1 7 Enabling WPA2-PSK If WPA2-PSK mode is desired then the global encryption cipher method should be set to AES with the following CLI c.
Configuration Guide 18 PN: 1725-36061-001_C.doc Now provide the pre-shared key (‘11111111’ in t his example): Xirrus_WLAN _Array(con fig)# security Xirrus_WLAN _Array(con fig)# ssid Xirrus_WLAN _A.
Xirrus Wi-Fi Array: XS-3500/3700 /3900 PN: 1725-36061-001_C.doc 19 The global encryption cipher for WPA2-PSK can also be set through the WMI as illustrated in Figure 4 Global WPA Settings .
デバイスPolycom XS-3700の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Polycom XS-3700をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPolycom XS-3700の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Polycom XS-3700の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Polycom XS-3700で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Polycom XS-3700を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPolycom XS-3700の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Polycom XS-3700に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPolycom XS-3700デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。