POSlineメーカーTPC7020Cの使用説明書/サービス説明書
ページ先へ移動 of 28
TPC7020B.
ii Copyright © 2007. All right s reserved. No warranty of any kind is made in regard to this material, including, but not limited to, impl ied warranties of merchantability or fitness for a particular purpose.
iii L a s e r S a f e t y The portable dat a terminal complies with safety standard IEC 60825 for a Class I laser product. It also complies with CDRH as applicable to a Class II laser product.
iv T able of Content General Information .................................................................. .1 Introduction ........................................................................... . 1 Un p a ck ing .................................
1 General Information 1.1. Introduction Congratulations on your purchase of the Bluetooth Personal Data Collector ( TP C) with LCD display . Along with superior portability and visually safe scanning .
2 1.2. Unp acking The TP C package should cont ain: - 1 ea. Pocket-Sized Personal Data Collector - 1 ea. DB-9(F) serial communication cable ( For data upload and download) - 3 ea. AAA NiMH rechargeable batteries - 1 ea Power Adapter If any package content s are damaged or missing, please contact your dealer immediately .
3 1.3. Device Outline Figure 1: Pocket-Sized P ersonal Dat a Collector Scan LCD Up Key Function LED Down UAR T port.
4 1.4. Battery Care In the interests of providing t he best product performance possible, the Personal Data Collector comes with high quality , rechargeable Nickel Metal Hydride (NiMH) batte ries and a Power Adapter . After NiMH batteries are installed, connect the Power Adapter cable and the batteries charge right in the unit.
5 batteries already loaded, pleas e press and hold both v and ^ keys for 30 sec. to turn on the TP C 3. 3 pcs AAA 700mAH NiMH rechar geable batteries (Use POSline supplied rechargeable batteries only).
6 Getting S tart 2.1. Inst alling and charging battery Figure 2: Inserting Batteries Press the battery cover lock to remove the cover . Insert batteries according to t he orientation in the picture Replace the cover and lock it back.
7 2. Plug the Power Adapter connector into the socket on the side of the large end connector of t he Communication Cable. 3. Plug the Power Adapter into an outlet. While charging, the LED on the TP C lights up red. The LE D turns of f when the batteries are fully charged.
8 2.2. Power on device to collect data The Personal Data Collector is pre-programmed with a basic dat a collection program, FREET ASK th at can read and store barcodes, do simple edits, and upload dat a to a PC through the Communication Cable.
9 2.2.2. Menu operation The menu items show on LCD and a reverse item indicates current selection. Use ^ and v keys to change the item selection and confirm by pressing SCAN key . Menu tree list 1. Run T a sk 2. Delete Data 3. Setup 1. LCD Contrast 2.
1 0 2.3. Scan barcode Select 1.Run T ask under Main menu Enter into data input mode. Press SCAN key to scan barcode. Hold TP C to point at the tar geted barcode.
1 1 2.4. Key in dat a When requiring to key in data m anually , there are two modes of data entry . Mode One : Press ^ key once start edit numeric Cursor digit add by one each ^ key Press v to move cu.
12 Dat a storage The TP C can retain more than 2,000 records. T o review stored data, press the ^ key . T o end review of stored data, press the FN key .
13 2.5. Upload Dat a There are three kinds of interf ace to upload data, Bluetooth®, RS-232 and HID. Once a communication device is set up (please refer to Device Setup, Communi cation), TP C will automatically detect its readiness before st arting uploading data.
14 Device Setup Select 3.Setup under Main Menu to enter Setup sub-menu. 3.1. LCD Contrast Use v and ^ keys to adjust LCD contra st from 1 to 22. Follow by SCAN to confirm. Figure 10: LCD Contrast 3.2. Beep V olume Use v and ^ keys to select V olume from Low , Medium, Loud and Quiet.
15 3.4. Barcode Setup Use S CA N key to conrm setting and to go through dierent types of barcode, EAN/UPC, Code 39, Codabar , ITF 25, Code 128, Code 93 , RSS14 , RSS14 Ex p an d ed, RSS14 Limited. Press v and ^ keys to select On /O . Figu re 12: Barc od e Se t up 3.
1 6 Disable/Enable Xon/Xoff Control . Press SCAN to select Dis/Enable Host ACK/NAK . Press SCAN to select Set Host Response time. Press SCAN to select Dis/Enable Online Send Rec. Press SCAN to select Disable/Enable Offline Operate. Press SCAN to select 3.
17 3.6. Auto Pow er off Use v and ^ keys to select the wait time of Auto Power off. Select to the setting of 1, 3, 5, 10, 30 minutes or Disable. Follow by SCAN key to confirm. Figure 13: Auto Power Off 3.7. Default Parameter The default settings will be restored whenever performing “ User reset ” operation, the “ Comm.
18 Codabar Enable ITF 25 Enable Code 128 Enabl e Code 93 Enabl e MSI Code Enable RSS 14 Disa b le RSS14 Expanded Disable RSS14 Limited Disable User Reset While TPC is powered off, press and hold SCAN key for more than 1.5 Sec. As soon as t he green LED Li t -up , pre ss FN key .
19 Use Windows T ask Generator Before use WinT askGen for communication, power on TP C and press FN to enter the “Remote Screen”. Press ^ key to connect or disconnect with host, the green LED indicate the connect status. 1. Click Com munication Setting at the menu bar .
20 3. Click Remote Device Setting . 4. Another setting window pops up. In this window , you can remotely change TP C settings. Press OK to confirm. 5. Click Uplo ad Dat a .
21 7. Once connected, the numbers of Records and Fields inside the TP C are shown on the left top. If Upload & Delete Data is selected, those stored dat a will be deleted soon after uploading to a PC. Press Upload to start uploading. 8. When uploading is completed, all data will be displayed in the main window , and Upload Finished pops up.
22.
23 Maintenance This device provides reliable and efficient operation with minimum of care. Although a specific maint enance is not required, but as to prolong the operating life of the device, the following precautions needs to be ensured.
24 6.3.Battery The lifetime of rechargeable batteries would rely on the number of times the batteries are rechar ged. In general, we recommend charge the device at the end of each working day or when the scanner requires charging.
デバイスPOSline TPC7020Cの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
POSline TPC7020Cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPOSline TPC7020Cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。POSline TPC7020Cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。POSline TPC7020Cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
POSline TPC7020Cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPOSline TPC7020Cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、POSline TPC7020Cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPOSline TPC7020Cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。