PremiertekメーカーPowerlink AP2402の使用説明書/サービス説明書
ページ先へ移動 of 61
AP2402 User Manual Premiertek 150Mbps Wireless-N Broadband Router V 1.0 . 8.1 1.
150Mbps Wir eless-N Broadband Router User Manual Certification FCC CE FCC Statement This equipm ent has been te sted and found to c omply with the limits for a Class B digital devi ce, pursuant to part 15 of the FCC rules. The se limits are designed to pr ovid e reasonable pr otection against harmful interfere nce in a residential installation.
150Mbps Wir eless-N Broadband Router User Manual Packa ge Contents Th e f oll owing items should b e found in y our pack age : 150Mbps W ireless-N B ro ad band Ro ute r Power adapter Q uic k Ins tallatio n Guide CD-Rom Ethernet cable Make sure that the package contains above items.
150Mbps Wir eless-N Broadband Router User Manual Contents CONTENTS ...................................................................................................................... ...................... 3 1. INTRODUCTION ................
150Mbps Wir eless-N Broadband Router User Manual 4.4. N ETWORK .............................................................................................................................. 34 4.4.1. W AN...................................
150Mbps Wir eless-N Broadband Router User Manual 4.12.3. Passwor d ...................................................................................................................... 57 4.12.4. WOL ......................................
150Mbps Wir eless-N Broadband Router User Manual 1. Introduction 1.1. Product Overview The 150Mbps W ireless-N Broadband Router is dedicated to Small Of fice/Home Office (SOHO) W ireless network solution. It is 4 in 1 network device, which combines wireless access point, firewall, 4-port Switch and the NA T -Router .
150Mbps Wir eless-N Broadband Router User Manual 1.3. Supporting Standard and Protocol ¾ IEEE 802.11b/g/n ¾ IEEE 802.11e ¾ IEEE 802.11h ¾ IEEE 802.
150 M bps Wir ele ss-N Br oadband Rout er User Manual 2. Hardwar e Installation 2.1. System Requirement Mini mum Requirements: Broadband (DS L/Cable) m odem and s ervice w ith Ethernet por t 802.1 1n b/g/n wireless adapter or Ethernet adapter and cable for each computer Internet Exp l orer® 5.
150Mbps Wir eless-N Broadband Router User Manual Off LAN Connection abnormal Rear panel Figure 2-2 Description Function PWR Connect to Power adapter , please don’ t use the unknown power adapter , otherwise your device may be damaged. LAN Connect with computer NIC or Ethernet device W AN Internet access Reset Restore settings 2.
150Mbps Wir eless-N Broadband Router User Manual ¾ Figure 2-3 ¾ Attach one end of an Ethernet cable to your computer ’ s Ethernet p ort, and the other end to one of the LAN ports of your router . ¾ Connect another Ethernet cable from your Cable/DSL modem to the W AN port of your router .
150Mbps Wir eless-N Broadband Router User Manual 3. Login Y ou can manage the 150Mbps W ireless-N Broadba nd Router through the W eb browser-based configuration utility . T o configure the device vi a W eb browser , at least one properly configured computer must be connected to the device vi a Ethernet or wireless network.
150Mbps Wir eless-N Broadband Router User Manual Figure 3-1 2. Double click the icon Network and Dial-up Connections 3. Highlight the icon Local Area Connection, right click your mouse, and click Properties Figure 3-2 4.
150Mbps Wir eless-N Broadband Router User Manual Figure 3-3 5. Choose Obtain an IP address automatically and Obtain DNS server address auto matically , and then press OK to close the Internet Protocol (TCP/IP) Properti es window Figure 3-4 6.
150Mbps Wir eless-N Broadband Router User Manual Figure 3-5 3.1.3. W indows XP Please follow the steps below to setup your computer: 1. Go to Start Æ Settings Æ Control Panel 2.
150Mbps Wir eless-N Broadband Router User Manual Figure 3-7 4. Highlight the icon Local Area Connection, right click your mouse, and click Properties Figure 3-8 5.
150Mbps Wir eless-N Broadband Router User Manual Figure 3-9 6. Choose Obtain an IP address automatically and Obtain DNS server address auto matically , and then press OK to close the Internet Protocol (TCP/IP) Properti es window Figure 3-10 7.
150Mbps Wir eless-N Broadband Router User Manual Figure 3-1 1 3.1.4. W indows V ista Please follow the steps below to setup your computer: 1. Go to Start Æ Settings Æ Control Panel 2.
150Mbps Wir eless-N Broadband Router User Manual Figure 3-13 4. Highlight the icon Local Area Connection, right click your mouse, and click Properties Figure 3-14 5.
150Mbps Wir eless-N Broadband Router User Manual Figure 3-15 6. Choose Obtain an IP address automatically and Obtain DNS server address auto matically , and then press OK to close the Internet Protoco.
150Mbps Wir eless-N Broadband Router User Manual Figure 3-16 7. Press OK to close the Local Area Co nnection Properties window 1. Figure 3-17 3.1.5. W indows 7 2. Please follow the steps blow to setup your computer: 3. Go to Start → Control Panel → Network and Internet.
150Mbps Wir eless-N Broadband Router User Manual 6. Figure 3-18 7. Figure 3-19 8. Choose Obtain an IP address automatically and Obtain DNS server address automatically , 21.
150Mbps Wir eless-N Broadband Router User Manual and then press the OK to close the window . 9. Figure 3-20 10. Press OK to close the Local Area Connection Properties window . 3.1.6. MAC OS Please follow the steps blow to setup your computer: 1. Go to Start → System preference Settings → Network.
150Mbps Wir eless-N Broadband Router User Manual 2. Figure 3-21 3. Click Network, Select Use DHCP at the Configuration bar , the sy stem will get the IP address automatically .
150Mbps Wir eless-N Broadband Router User Manual Press Apply to complete this operation and close the window . 3.2. Checking Connection with the Router After configuring the TCP/IP protocol, use the ping command to verify if the computer can communicat e with the Router .
150Mbps Wir eless-N Broadband Router User Manual Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 192.168.1.1: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), V erify your computer's network settings are correct and check the cable connection between the router and the computer .
150 M bps Wir ele ss-N Br oadband Rout er User Manual Figure 3-1 9 After you have logged in, the router's user interface will be displayed. The left menu shows the main options to configure the system, and the right screen is the summary information for viewing and adjusting the configuratio ns.
150Mbps Wir eless-N Broadband Router User Manual 4. Router Setup 4.1. Status This feature provides running status inform ation and detailed information about router .
150Mbps Wir eless-N Broadband Router User Manual ¾ Default Gateway: The IP address of Defau lt gateway you obtained after connect to the Internet, if you haven’t connected to In ternet yet, this field is 0.
150Mbps Wir eless-N Broadband Router User Manual 4.1.5. Router Status This item provides current running infor mation of System. Figure 4-5 4.1.6. T raffic Statistics This item provides statistics information a bout the bits router sends and received.
150Mbps Wir eless-N Broadband Router User Manual 4.2.2. PPPoE Figure 4-8 If your ISP provides you the PPPoE service (all ISP with DSL transaction will supply this service, such as the most popular ADSL technique ), please select this item. In the “Convenient configuration” Y ou can input your PPPoE u sername and password to access the Internet.
150Mbps Wir eless-N Broadband Router User Manual 4.2.4. W ireless Configur ation Y ou can choose “Enable” or “Disable” t o enable or disable the wireless function.
150Mbps Wir eless-N Broadband Router User Manual 4.3. WPS Settings W i-Fi Protect Setup (WPS) function can let you create a safety network easily . Y ou can through ‘PIN Input Config (PIN)’ or ’Push Button (PBC) ’ to encrypt your network.
150Mbps Wir eless-N Broadband Router User Manual 1. Push the WPS button in the Router until the WPS LED is flashing several times. 2. Push the WPS button in the wirel ess network card for about 3-5seconds. 3. The safe connection will be established autom atically .
150Mbps Wir eless-N Broadband Router User Manual Figure 4-17 4.4. Network 4.4.1. WA N This item provides two access types for you to configure the W AN parameters. They are wired access and wireless access. 4.4.1.1. Wired Access Figure 4-18 ¾ Internet Access T y pe: Ask for your ISP to get the correct access type.
150Mbps Wir eless-N Broadband Router User Manual fail to send Email, or fail to browse website. So if that happen, you can contact your ISP for more information and correct your router’ s MTU value.
150Mbps Wir eless-N Broadband Router User Manual fail to send Email, or fail to browse website. So if that happen, you can contact your ISP for more information and correct your router’ s MTU value.
150Mbps Wir eless-N Broadband Router User Manual Figure 4-22 4.4.5. IGMP Pr oxy Here you can set the IGMP Proxy ‘Enabled’ and ‘Disabled’. Figure 4-23 4.
150Mbps Wir eless-N Broadband Router User Manual Figure 4-24 ¾ W ireless net work status: Y ou can choose “enable” or “disable” to enable or disable th e “W ireless Network Status”, if what you choose is “Disable”, the AP function of wireless router will be turned off.
150Mbps Wir eless-N Broadband Router User Manual “WP A2-PSK” and “WP A/WP A2-PSK” five different encryption modes. 4.5.2.1. None “None” means do not encrypt wireless data.
150Mbps Wir eless-N Broadband Router User Manual 4.5.2.3. WP A-PSK Figure 4-27 ¾ Encryption type: Y ou can select the algor ithm you want to use, TKIP , AES or TKIP&AES. TKIP means “T emporal Key Inte grity Prot ocol”, which incorporates Message Integrity Code (MIC) to provide protection against hackers.
150Mbps Wir eless-N Broadband Router User Manual Figure 4-29 4.5.3. W ir eless MAC Filterin g Figure 4-30 ¾ MAC Filter Status: the default is disable. Y o u can filter wired users by enabling this function; thus unauthorized users can not access the network.
150 M bps Wir ele ss-N Br oadband Rout er User Manual Figure 4-3 1 WDS Name: Give a descrip tion of your wireless bridge to tell apart. WDS MAC Address: If t he current working m ode is “WDS” or “AP+W DS”, then you need to configure wirele ss bridge configuration.
150 M bps Wir ele ss-N Br oadband Rout er User Manual Input WDS name (e.g.: default), input MAC a ddress of AP2 (00-22-4f-bc-af-5d), clic k add, then the record named default will appears in WDS list. Select Channel is ‘Channel 6’in wireless management-basic of AP2.
150 M bps Wir ele ss-N Br oadband Rout er User Manual Select radio mode is ‘Access Point’ in wireless management-basic of AP1. Select Channel is ‘Channel 6’ in wireless management-basic of AP1. Figure 4-3 4 AP 2: Select radio mode is ‘REPEA TER’ in wireless management-basic of AP2.
150 M bps Wir ele ss-N Br oadband Rout er User Manual AP3: Select radio mode is ‘REPEA TER’ in wireless management-basic of AP3. Select Repeater SSID is ‘ Premiertek2 ’in wireless management-basic of AP2. Select Channel is ‘Channel 6’in wireless management-basic of AP2.
150Mbps Wir eless-N Broadband Router User Manual ¾ Aggregation: Y ou can accelerate the wire less transmission speed by enabling the aggregation function. The default is AMPDU ＋ AMSDU. ¾ Fragmentation Threshold: It specifies the m aximum size of packet during the fragmentation of data to be transmitted.
150Mbps Wir eless-N Broadband Router User Manual Figure 4-38 4.6. DHCP 4.6.1. DHCP Settings Figure 4-39 4.6.2. DHCP Clients List Display the state of assigned IP by DHCP Server .
150Mbps Wir eless-N Broadband Router User Manual 4.6.3. Addr ess Reservation Figure 4-41 ¾ Address Reservation: reserve IP address for designed physical address host. If you want to configure a fixed IP address for some host, please input physical address and IP address, then click add.
150Mbps Wir eless-N Broadband Router User Manual 4.7.2. Port T r iggering Port trigger module dynamically registers virtual server rules when any IP host generates the packet from the specified trigger protocol and port.
150Mbps Wir eless-N Broadband Router User Manual Figure 4-44 4.7.4. UPnP The UPnP function supp orts load Application’ s port forward record automatically .
150Mbps Wir eless-N Broadband Router User Manual tunnel, the router supports IPSEC pass-throug h, PPTP pass-through and L2TP pass-through. Figure 4-47 4.8.2. IP Addr ess Filtering Figure 4-48 ¾ Status: the default is disable. The rules of “Internet access control” based on source IP, port number and protocol.
150Mbps Wir eless-N Broadband Router User Manual Follow the following steps to set Internet Access Control: 1. Y ou can select “enable” and click “Save” to en able “IP Firewall” function. This is only the first step; you should continue to create appropriate rules for “IP Firewall”.
150Mbps Wir eless-N Broadband Router User Manual 2. Add MAC address you want to control in the “MAC address” field (the format is **-**-**-**-**-**), then click “Add” button, and you will see the MAC address has displayed in the MAC list.
150Mbps Wir eless-N Broadband Router User Manual 4.9. Static Routing Most of broadband router and wireless router ar e using NA T mode, so this feature is designed for most common network environment. Figure 4-51 ¾ Destination Network or IP Address: Specify a certain destination Network or IP address which static route forward to.
150Mbps Wir eless-N Broadband Router User Manual 4.10. QOS Settings Figure 4-52 ¾ Status: QOS switch. ¾ Automatic Uplink Speed: Router adjusts uplink bandwidth automatically . ¾ Manual Uplink Speed (Kbps): User c onfigures uplink bandwidth manually .
150Mbps Wir eless-N Broadband Router User Manual Figure 4-53 ¾ DDNS Status: Current status of DDNS server . ¾ DDNS Server Provider: For exam ple, if you want to use service of “roay .cn”, you have to first register and accounts for it. Other DDNS service providers as the same.
150Mbps Wir eless-N Broadband Router User Manual Figure 4-55 4.12.3. Password The default username/password is guest/guest. T o ensure the Router ’ s securit y , it is suggested that you change the default password to one of your choice, here enter a new password and then Re-enter it again to confirm your new p assword.
150Mbps Wir eless-N Broadband Router User Manual 4.12.6. Remote Management WEB Management Status: the default is disable. Router can be accessed on the remote site using “W eb setup”. Check the “Management Port ” and enter the port number and then press “save” button to enable web management.
150Mbps Wir eless-N Broadband Router User Manual 5. T r oubleshooting 1) I cannot access the Web-based Configuratio n Utility from the Ethernet computer used to configure the router. ¾ Check that the LAN LED is on. If the LED is not on, verify that the cable for the LAN connection is firmly connected.
150Mbps Wir eless-N Broadband Router User Manual 60 as required by the ISP. Also ensure you have entered the correct settings provided by the ISP. ¾ For cable users, if your ISP requires a regist ered Ethernet card MAC address, make sure you have cloned the network adapter’ s MAC address to the WAN port of the router.
デバイスPremiertek Powerlink AP2402の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Premiertek Powerlink AP2402をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPremiertek Powerlink AP2402の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Premiertek Powerlink AP2402の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Premiertek Powerlink AP2402で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Premiertek Powerlink AP2402を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPremiertek Powerlink AP2402の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Premiertek Powerlink AP2402に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPremiertek Powerlink AP2402デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
