PYLE AudioメーカーPLCD16MRWBの使用説明書/サービス説明書
ページ先へ移動 of 20
OWNER’S MANUAL MARINE/WEA THER-BAND AUDIO SYSTEM • PLL Synthesizer Ster eo Radio • Digital Compact Disc Player • Automatically Memory Storing • Slide Down Detachable Panel • Pr ogram CD T racks • CD Changer Contr ol • Auxiliary Input Function PLCD16MRWB www .
2 CONTENTS Installation ..................................................................................................... 3 DIN Front-Mount.................................................................................................... 3 Installing the unit .
Notes: • The unit can be installed on the vehicle or the ships. • Choose the mounting location wher e the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
4 INST ALLA TION (Fig. 2) 1 2 6 5 4 3 7 OPEN button Front Panel 1 2 1. Dashboard 2. Nut (5mm) 3. Spring washer 4. Screw (5x25mm) 5. Screw 6. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle.
5 Open Bottom Button Bottom Button Protective Case Front Panel Front Panel USING THE DET ACHABLE FRONT P ANEL T o Detach the Front Panel 1. Press the OPEN button, the fr ont panel will slide down. 2. When the front panel slides down, press the bottom button of the fr ont panel upward and pull it out fr om the panel bracket.
6 WIRING CONNECTION GREEN GREEN/BLACK GREY GREY/BLACK VIOLET VIOLET/BLACK MAIN UNIT WHITE WHITE/BLACK FRONT Lch SPEAKER REAR Lch SPEAKER FRONT Rch SPEAKER REAR Rch SPEAKER Rch RED Lch WHITE (GREY) RCA.
This unit is a marine rated wired r emote contr ol made using a modified contr oller or similar layout. It is capable of operation specified functions on the marine AM/FM/CD receiver and the marine AM/FM/Cassette r eceiver . The body , buttons, controls and display need to be UV and water -resistant.
4 MODE SELECTION button Press the MODE button (4) to step sequentially thr ough the following sour ces: e.g. radio mode to CD mode (or cassette mode) to CDC mode to AUX in mode. 5 BAND SELECTION button Press the BAND button (5) to step sequentially thr ough the following bands: FM1, FM2, AM, WX.
1. First insert the hooks on the base into the slots of the holder to install the base to the holder . 2. Select the proper object, then place the r emote mounting bracket on the base and let the object go through the base and the mounting bracket.
10 3. Align the screw holes on the holder with the scr ew holes on the base and the scr ew holes on the bracket, then use the two screws ( ø 4X50) and nuts to fix the bracket, the base and holder to the proper location. 4. Last install the remote contr ol to the holder .
11 OPERA TION 14 19 8 13 12 11 9 1 22 23 20 21 24 6 16 17 10 2 7 15 18 3 4 5 25 V olume Bass T reble Balance Fader GENERAL OPERA TION • ON/OFF Switch on the unit by pressing PWR button (9). When system is on, press PWR button (9) again to turn off the unit.
12 OPERA TION display . If you select beep sound on, whenever press any button, beep sound output. • LOUDNESS Press LOUD (DIM) button (15) shortly to reinfor ce the bass output and display will show “ LOUD ” . Press it again to release this function.
13 OPERA TION RADIO OPERA TION • BAND SELECTION At tuner mode, press BAND button (18) shortly to select the desired band. The reception band will change in the following order: FM1 FM2 AM WX • ST A TION SELECTION Press button (16) or button (17) shortly to activate automatic seek function.
14 OPERA TION CD OPERA TION • SELECT TRACKS Press button (16) or button (17) to move to the previous track or the following track. T rack number shows on display . Hold press button (16) or button (17) to fast reverse or fast forwar d. Disc play starts from when you r elease the button.
15 Recordable Rewritable OPERA TION CD CHANGER OPERA TION • SELECT TRACKS Press button (16) or button (17) to move to the previous track or the following track. T rack number shows on display . Hold press button (16) or button (17) to fast reverse or fast forwar d.
16 GENERAL P ower Supply Requirements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 178 (D) x 50 (H) mm Tone Controls - Bass (at 100 Hz) : ± 10 dB - T reble (at 10 KHz) : ± 10 dB Maximum Output P ow er : 4 x 50 W atts Current Drain : 15 Ampere (max.
17 TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is properly not on.
.
.
88-C1802-13.
デバイスPYLE Audio PLCD16MRWBの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
PYLE Audio PLCD16MRWBをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPYLE Audio PLCD16MRWBの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。PYLE Audio PLCD16MRWBの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。PYLE Audio PLCD16MRWBで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
PYLE Audio PLCD16MRWBを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPYLE Audio PLCD16MRWBの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、PYLE Audio PLCD16MRWBに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPYLE Audio PLCD16MRWBデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。