PYLE AudioメーカーPLCD19XMRの使用説明書/サービス説明書
ページ先へ移動 of 18
OWNER’S MANUAL Mobile Audio System • PLL Synthesizer Stereo Radio • Digital Compact Disc Player • XM Ready Function • Automatic Memory Storing • Slide Down Detachable Panel • Direct T rack Access • Program CD T racks • CD Changer Control • Auxiliary Input Function • Wired Commander Contr ol www .
2 CONTENTS Installation .....................................................................................................3 DIN Front-Mount....................................................................................................3 Installing the unit .
Notes: • The unit can be installed on the vehicle or the ships. • Choose the mounting location wher e the unit will not interfere with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
4 INST ALLA TION (Fig. 2) 1 2 6 5 4 3 7 OPEN button Front Panel 1 2 1. Dashboard 2. Nut (5mm) 3. Spring washer 4. Screw (5x25mm) 5. Screw 6. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle.
5 Bottom Button Bottom Button Protective Case Front Panel USING THE DET ACHABLE FRONT P ANEL T o Detach the Front Panel 1. Press the OPEN button, the fr ont panel will slide down. 2. When the front panel slides down, press the bottom button of the fr ont panel upward and pull it out fr om the panel bracket.
6 WIRING CONNECTION ANTENNA CONNECTOR (BLACK) CD CHANGER CONNECTOR SOCKET (BLACK) FUSE WIRING REMOTE CONNECTOR SOCKET AUDIO R IN (RED) AUDIO L IN (WHITE) XM RECEIVER CONNECTOR SOCKET (BLACK) RED RCH W.
OPERA TION 7 CONTROL & FUNCTIONS KEYS This unit is a marine rated wired r emote control made using a modified controller or similar layout. It is capable of operation specified functions on the marine AM/FM/CD receiver . The body , buttons, controls and display need to be UV and water -resistant.
OPERA TION 8 4 MODE SELECTION button Press the MODE button (4) to step sequentially thr ough the following sources: e.g. radio mode to CD mode to CDC mode to AUX in mode. 5 BAND SELECTION button Press the BAND button (5) to step sequentially thr ough the following bands: FM1, FM2, FM3, AM1, AM2.
INST ALLA TION 9 3. Align the screw holes on the holder with the screw holes on the base and the screw holes on the bracket, then use the two screws (ø4X50) and nuts to fix the bracket, the base and holder to the proper location. 4. Last install the remote contr ol to the holder .
10 OPERA TION 14 19 8 13 12 11 9 1 22 23 20 21 24 6 16 17 10 2 7 15 18 3 4 5 25 LOCA TION OF KEYS 1. DISP 2. AS/PS/ELAPSE 3. / /MUTE 4. EJ 5. DISC SLOT 6. MODE 7. OPEN 8. LIQUIID CRYST AL DISPLA Y 9. PWR 10. SEL/MENU 11. VOL 12. VOL 13. SHIFT/SCAN/XM-MOD 14.
GENERAL OPERA TION SWITHCHING ON/OFF THE UNIT Pressing PWR button (9) to switch on or turn off the unit. When system power turns on, the system is returned to previous mode. F ACEPLA TE RELEASE Press OPEN button (7) to slide down the removable faceplate.
“FREQ/CLOCK/NO PRI priority” mode. And then you can press VOL button (11) or VOL button (12) to select frequency priority or clock priority or no priority .
13 OPERA TION RADIO OPERA TION SWITCHING TO RADIO MODE Pres s MODE button (6) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency . SELECTING THE FREQUENCY BAND At radio mode, press BAND/ENTER button (18) shortly to select the desired band.
14 OPERA TION Normal Category mode Direct T une STORING PRESET CHANNELS The preset buttons can be used to stor e channels for convenient access to your favorite channels. - Programming channels 1. Select the desired channel you want to store in memory .
15 OPERA TION you select a track number that doesn’t belong to the current disc, “NO TR” will appear on the display . REPEA TING THE SAME TRACK Hold press RPT button (21) for several seconds to continuously repeat the same track. Hold press it again to stop r epeat.
OPERA TION 16 DISC NOTE A. Notes on discs: 1. Attempting to use non-standard shape discs (e.g. square, start, heart) may damage the unit. Be sure to use r ound shape CD discs only for this unit. 2. Do not stick paper or tape etc., onto the label side or the recor ding side of any discs, as it may cause a malfunction.
17 GENERAL P ow er Supply Requir ements : DC 12 V olts, Negative Ground Chassis Dimensions : 178 (W) x 178 (D) x 50 (H) mm Tone Controls - Bass (at 100 Hz) : ± 10 dB - T r eble (at 10 KHz) : ± 10 dB Maximum Output P o wer : 4 x 50 W atts Current Drain : 15 Ampere (max.
TROUBLE SHOOTING Before going thr ough the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer . Symptom Cause Solution No power . The car ignition switch is If the power supply is not on.
デバイスPYLE Audio PLCD19XMRの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
PYLE Audio PLCD19XMRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPYLE Audio PLCD19XMRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。PYLE Audio PLCD19XMRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。PYLE Audio PLCD19XMRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
PYLE Audio PLCD19XMRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPYLE Audio PLCD19XMRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、PYLE Audio PLCD19XMRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPYLE Audio PLCD19XMRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。