PYLE AudioメーカーPLPK5TVDの使用説明書/サービス説明書
ページ先へ移動 of 20
PLPK5TVD OWNER’S MANUAL COLOUR LCD TV/RECEIVER.
2 INST ALLA TION Notes: • Choose the mounting location where the unit will not interfer e with the normal driving function of the driver . • Before finally installing the unit, connect the wiring temporarily and make sur e it is all connected up properly and the unit and the system work pr operly .
3 MOUNTING THE TUNER UNIT 1. Bracket (A) 5. T apping Screw with W asher (M5 x 12) 2. Mounting Bolt (M5 x 5) 6. Spring W asher (M6) 3. Bracket (B) 7. Spring W asher (M5) 4. Hexagonal Bolt with W asher (M6 x 12) 8. Double Sided T ape INST ALL THE DISPLA Y UNIT Before install the display unit, please r emove its tail screw and cable parts.
4 (Fig. 2) 1 2 7 5 4 3 6 1 2 3 5 2 5 4 1 1. Dashboard 2. Nut (M5) 3. Spring W asher 4. T apping Screw with W asher (M5 x 25) 5. Screw 6. Plain W asher 7. Strap Be sure to use the strap to secur e the back of the unit in place. The strap can be bent by hand to the desired angle.
HOW TO OPEN AND CLOSE THE SCREEN DISPLA Y 1. Pr ess release button to draw out the scr een display . 2. T ur ning the display upward. 3. Adjusting the viewing angle.
6 4. T ur ning the display downward. Make sur e to return the display to centre position before drawing in. It cannot be draw in with its angles adjusted.
7 ELECTRICAL CONNECTION RADIO/TV MAIN UNIT (VIEW FROM REAR) TV DIVERSITY ANTENNA INPUT GREY TV CONTROL GREY/BLACK TV DIVERSITY ANTENNA INPUT RADIO ANTENNA INPUT BLUE/WHITE POWANT REAR Rch SPK VIOLET V.
OPERA TION 18 21 22 17 1 23 4 20 9 10 19 8 15 4 12 3 14 6 8 5 1 11 7 16 2 13 24.
GENERAL OPERA TION • ON/OFF Switch on the unit by pressing PWR button (1). When system is on, pr ess it again to turn it off. • F ACEPLA TE RELEASE Press REL button (2) to draw out the faceplate, push the panel to draw in. When the faceplate is drawn out, turn the faceplate upward and adjust TV display .
Time Setting - Set hours: Holding down T/F button (5) for several seconds, and the clock is blinking on the display , press button (14) to adjust the hour . - Set minutes: Holding down T/F button (5) for several seconds, and the clock is blinking on the display , press button (13) to adjust the minutes.
11 RADIO OPERA TION • SELECTING BAND Press BAND button (11) to change between three FM bands and two AM bands. Each band stores up to six pr eset stations. • SELECTING STATION During radio mode, press MAN/SKP button (13) to incr ease frequency or (14) to decrease fr equency by one step of channel spacing.
12 TV OPERA TION • SELECTING RECEIVING MODE Press TV/A V button (17) to select among TVch/A V1/AV2 . • SELECTING CHANNEL Press CH+ button (9) or CH – button (10) to choose channel upwar d or downward • MENU CONTROL In TV mode Press MENU button (18) to switch the MENU CONTROL mode.
13 Note: When you set the color mode to “ PA L ” in SYSTEM MENU, there is no “ TINT ” item to display . In this menu, the range of setting value is 00~63, and the recommended range of these va.
14 --BAND-- BAND setup Y ou can use CONTROL+ button (19) or CONTROL – button (20) to switch between UHF , VHFL and VHFH band. --FINE-- FINE setup When the frequency has warp, and the pictur e displayed unstable, you can use CONTROL+ button (19) or CONTROL – button (20) to start FINE function to adjust it.
15 --SEARCH-- SEARCH setup Use CONTROL+ button (19) or CONTROL – button (20) to start manual station search. And it will start fr om the band you select in BAND setup. The SKIP and AFT two items will be set automatically . --ASM-- ASM (Auto Search Memory) setup Use CONTROL+ button (19) or CONTROL – button (20) to start auto station sear ch.
16 COLOR setup Use CONTROL+ button (19) or CONTROL – button (20) to switch color mode among AUTO, P AL, N3.58 and N4.43. --SOUND-- SOUND setup Use CONTROL+ button (19) or CONTROL – button (20) to switch sound mode among M, B/G, I and D/K. --LANG.-- LANG.
17 --CORING-- CORING setup Use CONTROL+ button (19) or CONTROL – button (20) to switch between ON and OFF . When the coring function is on, it can effectively decease the picture noise and improve the image quality . --HALFTONE-- HALFTONE setup Use CONTROL+ button (19) or CONTROL – button (20) to switch the menu background between ON and OFF .
18 • PROGRAM SCANNING Press SCAN button (22), “ SCAN OFF ” will display on the lower left corner of the screen. Pr ess it again, the screen will display “ SCAN ON ” , then it begins to scan 1.5 seconds of each channel in sequence. When it completes, the screen will display “ SCAN OFF ” .
19 REMOTE CONTROL HANDSET 2 11 8 9 10 16 5 6 7 14 13 15 12 17 4 3 1 CONTROL & FUNCTION KEYS 1. POWER = Press POWER to turn the unit ON or OFF 2. TV/A V = Switch between TV/A V1/AV2 3. 0 - 9 = Numeric buttons, press to select the corr esponding channel 4.
SPECIFICATION GENERAL P o wer Supply V oltage : DC 12 V olts, Negative Ground Maximum P o wer : 4 x 60 W atts Load Impedance : 10 Ampere (max.) Tone Controls - Bass (at 100 Hz) : + / – 10 dB - T reble (at 10 KHz) : + / – 10 dB TV Monitor Screen Size : 5.
デバイスPYLE Audio PLPK5TVDの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
PYLE Audio PLPK5TVDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPYLE Audio PLPK5TVDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。PYLE Audio PLPK5TVDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。PYLE Audio PLPK5TVDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
PYLE Audio PLPK5TVDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPYLE Audio PLPK5TVDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、PYLE Audio PLPK5TVDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPYLE Audio PLPK5TVDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。