PYLE AudioメーカーPLTVCP85の使用説明書/サービス説明書
ページ先へ移動 of 18
VIDEO CASSETTE RECORDER WITH BUILT-IN TV TUNER PLTVCP85.
CAUTIONS AND WARNINGS To obtain the best results and to avoid malfunctions, PLEASE READ CAREFULLY THE DESCRIPTIONS AND OPERATING PROCEDURES CONTAINED IN THIS OWNER'S MANUAL PRIOR TO OPERATING THE VIDEO CASSETTE RECORDER. WARNING TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
2 1. Read Instructions-All the safety and operating instructions should be read before the Video Cassette Recorder is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Cautions and Warnings-All cautions and warnings regarding the Video Cassette Recorder should be adhered to.
3 INFORM ATION TO THE USER This equipment has been tested and found to comply with the limits for a Cla ss B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4 BUILT-IN TV TUNER (TV/CATV) HI-FI STEREO SYSTEM BACK LIGHTING OF FUNCTION BUTTONS ON SCREEN DISPLAY (English) EXTERNAL IR REMOTE CONTROLLER WITH RECEIVER DEW & HEAT SENSORS FOR TAPE PROTECTION NTSC COLOR SYSTEM TWO AUDIO/VIDEO INPUTS ENCORE FUNCTION - Press ENCORE key on the remote controller to watch the desired picture once during playback.
5 INS TALLATION WITH MOUNTING BRACKETS Use the short screw for the joint of the VCR and bracket. Use the long screw for installation of this VCR to your vehicle or any other place. The VCR can be mounted vertically , horizontally or at any angle in between with the supplied mounting brackets.
6 2 3 4 5 9 6 7 8 10 11 12 13 2. Power Key 3. Cassette-In Lamp When power is supplied to the set, the power indicator lamp will always light up in red. The Power ON and Power OFF mode will be toggled by pressing this key. When the POWER is switched on, the power lamp will light up in red the other keys will light up in green.
7 8. Fast Forward / Cue Key 9. REC Key Press the REC key for at least one second to start recording. 10. DEW/HEAT Lamp When power is on, this indicator flashes red to indicate excessive moisture buildup inside the VCR. The unit will not operate unit it dries out sufficiently ( the tape can be ejected from the unit).
8 1. AUDIO/VIDEO IN (AV1) Connector this terminal to VIDEO/AUDIO OUT terminal of your Game machine, Camcorder, Portable DVD Player, using the RCA cord For displaying this Rear A/V input connected, Input Signal should be set to "AV1" in Menu setting mode.
9 5. DC 12V IN JACK ( Round type) To use this connector, below Convert-Adapter accessory should be locked into above connector 4. Connect the TV antenna (or cable if available- home use) to this connector. 7. RF OUT This connectors provides an interface to the antenna input connectors terminal of your television using a coaxial cable.
10 1. To watch the desired picture once more during playback, press "ENCORE" key . The VCR unit rewinds the tape for 5 seconds and will play the picture watch again. 2. POWER ON/OFF 3. To watch the picture from start position of tape, press "REPLAY" key .
1. Press MENU key on the remote control. 2. Press shift key, until the cursor is placed in front of the "AUTO REPEAT " option. 3. Press select key until the appropriate system is selected. ("on" or "off ") 4. On completion, press MENU key to exit the menu.
12 MENU OSD ON AUTO PLAY ON AUTO REPEAT ON RECORD SPEED EP VCR OUTPUT CH CH3 INPUT SIGNAL TV SHIFT: SEL: END:MENU Setting the Record Speed 1. Press MENU key on the remote control. 2. Press shift key, until the cursor is placed in front of the "RECORD SPEED" option.
1. Press MENU key on the remote control. 2. Press shift key, until the cursor is placed in front of the "INPUT SIGNAL" option. 3. Press select key, then the current input signal mode will be blinked. 4. Press shift key, until "CATV" is selected.
14 The video heads enable the VCR to read video information pictures from the tape during playback. In the unlikely event that the heads become clogged with dirt video playback will be impossible. This can easily be determined during playback of a known good tape, there is good sound, but the picture is extremely snowy.
15 TROUBLE SHOOTING There is no power to the VCR? Noise bars on screen. Operation key does not work. Cassette is ejected upon inserting Audio output does not change to Hi-Fi mode. The power cord is not connected. The polarity of power cord is not correct.
16 SYMPTOMS CAUSE POSSIBLE SOLUTIONS Power indicated with backlighting-unit will not operate. Poor video/snow picture or line on screen. PLAY mode indicated no audio or video to TV. (Unit in dew mode) Dew feature activated (see instruction manual) No tape in unit.
17 SPECIFICATIONS MODEL POWER SUPPLY POWER CONSUMPTION DIMENSION WEIGHT APPROX VIDEO SIGNAL SYSTEM TAPE TYPE TAPE SPEED DC 12V 13W 265 X 91 X 275 (W xH x D)mm 2.9Kg NTSC color VHS Type SP: 33.35 mm/sec, LP: 22.23mm/sec, SLP: 11.12 mm/sec Antenna In/Output terminnals UHF/VHF 75 F type connector.
デバイスPYLE Audio PLTVCP85の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
PYLE Audio PLTVCP85をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPYLE Audio PLTVCP85の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。PYLE Audio PLTVCP85の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。PYLE Audio PLTVCP85で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
PYLE Audio PLTVCP85を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPYLE Audio PLTVCP85の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、PYLE Audio PLTVCP85に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPYLE Audio PLTVCP85デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。