PYLE AudioメーカーPYD-1918の使用説明書/サービス説明書
ページ先へ移動 of 16
pro series PYD-1918/PYD1928 PYD-1938/PYD-1948 PYD-1958 4 channel professional.
Your PYLE PRO Series Performance Mixer is a sophisticated control center, perfect for mixing sound from multiple playback sources such as microphones, tuners, CD players, turntables or the audio outputs from a VCR. This mixer is ruggedly constructed for home or professional use.
w Features and Controls: PYD1918 Mixer Pyle Pro Mixer Owner’s Manual – 1 ne Power Switch and Red light Illumination Equalizer On/Off Switch Effect Switch (Send/Receive) Lets you connect a sound effect device, such as reverb, sampler , etc. and either play the signal from it or play another input through it.
2 – Pyle Pro Mixer Owner’s Manual Features and Controls: PYD1928 Mixer Equalizer On/Off Switch Effect Switch (Send/Receive) Lets you connect a sound effect device, such as reverb, sampler , etc. and either play the signal from it or play another input through it.
Features and Controls: PYD1938 Mixer Pyle Pro Mixer Owner’s Manual – 3 Equalizer On/Off Switch Effect Switch (Send/Receive) Lets you connect a sound effect device, such as reverb, sampler , etc. and either play the signal from it or play another input through it.
4 – Pyle Pro Mixer Owner’s Manual Features and Controls: PYD1948 Mixer Equalizer On/Off Switch Effect Switch (Send/Receive) Lets you connect a sound effect device, such as reverb, sampler , etc. and either play the signal from it or play another input through it.
Pyle Pro Mixer Owner’s Manual – 5 Features and Controls: PYD1958 Mixer s x e e Equalizer On/Off Switch Effect Switch (Send/Receive) Lets you connect a sound effect device, such as reverb, sampler , etc. and either play the signal from it or play another input through it.
Presetting the Controls Before Use Since sudden high output levels from your Pyle Pro mixer can damage not only audio devices connected to the mixer output but your hearing as well (especially if you are using headphones), please adjust the mixer’s controls BEFORE connecting AC power or turning on the unit.
Pyle Pro Mixer Owner’s Manual – 7 Connecting High Level Output Audio Sources Connect up to 8 such sources (tuner, cassette deck, CD Player, camcorder or VCR) to the input jacks for Line 1 (if not being used as Phono 1 input), Line 2, Line 3 (if not being used as Phono 2 input), Line 4, Line 5 and Line 6.
8 – Pyle Pro Mixer Owner’s Manual Using the Channel Input Gain Controls Adjusting the Gain controls for each channel permits you to fine tune the level of each of the audio inputs, since input levels usually vary. Rotate the Gain controls clockwise to increase levels.
Pyle Pro Mixer Owner’s Manual – 9 Plug a pair of stereo headphones (not supplied) with a 1/4” jack into the Phones input. Using headphones not only affords you the opportunity to listen privately, but also enables you to monitor (”cue”) the incoming audio sources so you can locate an exact passage or section before mixing it in.
10 – Pyle Pro Mixer Owner’s Manual Monitoring (”Cueing”) the Inputs 1. Set the CUE ASSIGN switch of the input source (MIC , CH1, CH2, CH3 or CH 4) you wish to monitor.
Pyle Pro Mixer Owner’s Manual – 11 Adding Equalization to the Mix You can further tailor the sound processed through the mixer to match your acoustic surroundings or suit your personal preferences by using the ten frequency sliders for each channel.
12 – Pyle Pro Mixer Owner’s Manual Using the Mono/Stereo Mode Switch When the MASTER MONO/STEREO switch is in the MONO position, the mixer combines the right and left channels and sends them to the OUTPUT R and L jacks. These combined outputs can be used by a monoaural amplifier, such as a PA amp.
4. To playback the recorded sample ONCE, turn the SAMPLER MODE switch to SINGLE, and press START/STOP. The LED will go on, indicating that a sample is playing.
14 – Pyle Pro Mixer Owner’s Manual R.A.#: _____________ PYLE PRO Service Center 1600 63rd Street Brooklyn, NY 11204 You must also include the following items with your return: • A copy of your s.
デバイスPYLE Audio PYD-1918の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
PYLE Audio PYD-1918をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはPYLE Audio PYD-1918の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。PYLE Audio PYD-1918の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。PYLE Audio PYD-1918で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
PYLE Audio PYD-1918を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はPYLE Audio PYD-1918の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、PYLE Audio PYD-1918に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちPYLE Audio PYD-1918デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
