AudioControlメーカーVERSION 6.2の使用説明書/サービス説明書
ページ先へ移動 of 178
SIP CPE Release Notes Version 6.2 December 2010 Document #: LTRT ‐ 26901 MediaPack TM Media Gateways Mediant TM Media Gateways Multi ‐.
.
Version 6.2 3 December 2010 SIP Release Notes Contents Table of Contents 1 What's New in Release 6.2 ................................................................................. 9 1.1 Supported Hardware Platforms ................
SIP Release Notes 4 Document #: LTRT-26901 CPE SIP Products 1.12.3 Networking Parameters ........................................................................................ 113 1.13 Obsolete Parameters ................................
Version 6.2 5 December 2010 SIP Release Notes Contents List of Tables Table 1-1: Available Medi ant 800 MSBG Models ................................................................................. 11 Table 1-2: Mediant 1000 MSBG Voice I/O Module Hardware Revision Co mpatibility List .
SIP Release Notes 6 Document #: LTRT-26901 CPE SIP Products Reader’s Notes.
Version 6.2 7 December 2010 SIP Release Notes Notices Notice This document describes the Release 6.2 of AudioCodes products – MP-1xx , Mediant 600, Mediant 800 MSBG, Mediant 1000 MSBG, Mediant 1000, Mediant 2000, and M ediant 3000. Information contained in this document is believed to be accurate and reliabl e at the time of printing.
SIP Release Notes 8 Document #: LTRT-26901 CPE SIP Products Related Documentation Document Name Product Reference Manual for SIP Gateways a nd Media Servers MP-11x & MP-124 SIP Installation Manual.
Version 6.2 9 December 2010 SIP Release Notes 1. What's New in Release 6.2 1 What's New in Release 6.2 This document describes the softwa re and hardware relea se of Version 6.
SIP Release Notes 10 Document #: LTRT-26901 CPE SIP Products 1.1 Supported Hardware Platforms This section describe s the support ed hardware platforms in Release 6.2 1.1.1 New Hardware Platforms This section describe s the new hardware platforms in troduced in Release 6.
Version 6.2 11 December 2010 SIP Release Notes 1. What's New in Release 6.2 The available customer-o rdered hardware co nfigu rations are listed in the table below: Table 1-1: Available Mediant 8.
SIP Release Notes 12 Document #: LTRT-26901 CPE SIP Products 1.1.2 Existing Hardware Platforms This section descri bes existing hardware platfo rm s from the previous release that are also supported in Release 6.
Version 6.2 13 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.1.2.3 Mediant 800 MSBG This release supports the following exist ing hardware platforms: Analog telephony interfaces, offering only FXS or only FXO interfaces, or a combination thereof.
SIP Release Notes 14 Document #: LTRT-26901 CPE SIP Products 1.1.2.4 Mediant 1000 MSBG This release supports the following exist ing hardware platforms: Mediant 1000 and Mediant 1000B chassi s.
Version 6.2 15 December 2010 SIP Release Notes 1. What's New in Release 6.2 Open Solutions Network (OSN) se rver platform, available in one of the following models: • OSN Ver. 1 (OSN1), based on Intel™ Celeron™ 600 MHz pro cessor (for third- party applications such as IP PBX) • OSN Ver.
SIP Release Notes 16 Document #: LTRT-26901 CPE SIP Products Item No. Description H/W Revision FASU00587 CRMX-T (LAN 1, 2, 3, Dual T1 WAN DSU/CSU Trunk) P1.2 FASU00557 CRMX-L (LAN 1, 2, 3, GE WAN 1000Base-LX) P1.5 FASU00556 CRMX-C (LAN 1, 2, 3, GE WAN copper Ethernet) P2 FASU00557 CRMX-S (LAN 1, 2, 3, GE WAN 1000Base-SX) P1.
Version 6.2 17 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.1.2.7 Mediant 3000 This release supports the following exist ing hardware platforms: Mediant 3000 hosting a single TP-63 10 blade, providing SONET/SDH or T3 PSTN interfaces.
SIP Release Notes 18 Document #: LTRT-26901 CPE SIP Products 1.2 SIP New Features This section lists the new S IP features in Release 6.2. 1.2.1 SIP General New Features The device support s the following new SIP general (G ateway and SBC appli cations) features: 1.
Version 6.2 19 December 2010 SIP Release Notes 1. What's New in Release 6.2 3. SDP Offer/Answer Negotiation upon Modified Se ssion: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG.
SIP Release Notes 20 Document #: LTRT-26901 CPE SIP Products 4. SIP Secure Connection Vulnerability: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Medi.
Version 6.2 21 December 2010 SIP Release Notes 1. What's New in Release 6.2 5. Transcoding Mode for SBC an d IP-to-IP Applications: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG.
SIP Release Notes 22 Document #: LTRT-26901 CPE SIP Products 7. SIP Authorization Header in Initial Registration Request: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 M.
Version 6.2 23 December 2010 SIP Release Notes 1. What's New in Release 6.2 8. SIP Route Header in Init ial Registration Request: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG M.
SIP Release Notes 24 Document #: LTRT-26901 CPE SIP Products This feature is enabled by the new para meter, UsePingPongKeepAlive . In addition, the maximum interval after which a CRLF Keep- Alive (“ping”) is sent after a received “pong” is configured usi ng the new parameter, PingPongKeepAliveTime (5 to 2,000,000 sec; default is 120).
Version 6.2 25 December 2010 SIP Release Notes 1. What's New in Release 6.2 12. Increased Characters for Request-URI Host Name per IP Group: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant.
SIP Release Notes 26 Document #: LTRT-26901 CPE SIP Products 14. Multiple NATs for SIP Control and RTP Media using Static NAT Rules: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Med.
Version 6.2 27 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.2.2 SIP Gateway New Features The device supports the following new SIP Gateway a pplication features: 1.
SIP Release Notes 28 Document #: LTRT-26901 CPE SIP Products 3. Adapting Comfort N oise to Remote Party : Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000.
Version 6.2 29 December 2010 SIP Release Notes 1. What's New in Release 6.2 Notes: • The Hotline duration can be set for all p orts using the existing, “global” param eter, HotLineToneDuration . • This feature is applicable only to FXS and FXO interfaces.
SIP Release Notes 30 Document #: LTRT-26901 CPE SIP Products 7. Increase in Characters for Endpoint Phone Num ber: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Med.
Version 6.2 31 December 2010 SIP Release Notes 1. What's New in Release 6.2 9. Flash-Hook with Digit Sequence: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Me.
SIP Release Notes 32 Document #: LTRT-26901 CPE SIP Products 11. High Definition Three-Wa y Conferencing: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000.
Version 6.2 33 December 2010 SIP Release Notes 1. What's New in Release 6.2 An example of the X-RTP-Stat header in a SIP BYE message is shown below: BYE sip:302@10.33.4.125 SIP/2.0 Via: SIP/2.0/UDP 10.33.4.126;branch=z9hG4bKac2127550866 Max-Forwards: 70 From: <sip:401@10.
SIP Release Notes 34 Document #: LTRT-26901 CPE SIP Products • Obtaining a GRUU: The mechanism for obtaini ng a GRUU is through registrations. A UA can obt ain a G RUU by generating a REGISTER request containing a Supported he ader field with the value “gruu”.
Version 6.2 35 December 2010 SIP Release Notes 1. What's New in Release 6.2 15. Trunk Re-Registration upon Return to Service: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Media.
SIP Release Notes 36 Document #: LTRT-26901 CPE SIP Products 17. Table Increase for Source Phone Number Manip ulation Table for IP-to-Tel Calls: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant .
Version 6.2 37 December 2010 SIP Release Notes 1. What's New in Release 6.2 19. RTCP XR Voice Quality Monitoring: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG.
SIP Release Notes 38 Document #: LTRT-26901 CPE SIP Products 21. New Range and Defaults for T.38 Fax Maximum Buffer Size: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 M.
Version 6.2 39 December 2010 SIP Release Notes 1. What's New in Release 6.2 23. Fax Transmission behind NAT: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Medi.
SIP Release Notes 40 Document #: LTRT-26901 CPE SIP Products 25. B-Channel Off-Hook Cut-Through : Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Mediant.
Version 6.2 41 December 2010 SIP Release Notes 1. What's New in Release 6.2 27. Pre-emption of IP-to-Tel E911 Emergency Calls: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Medi.
SIP Release Notes 42 Document #: LTRT-26901 CPE SIP Products 29. Multi-AMD Sensitivity Table: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Mediant 300.
Version 6.2 43 December 2010 SIP Release Notes 1. What's New in Release 6.2 31. Additional VXML Script Attribut es for Invoking VXML Scripts: Product MP-11x MP-124 Mediant 600 Mediant 1000 Median.
SIP Release Notes 44 Document #: LTRT-26901 CPE SIP Products 33. Enhanced ISDN BRI Support: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Mediant 3000/.
Version 6.2 45 December 2010 SIP Release Notes 1. What's New in Release 6.2 35. BRI Call Forwarding Supplementary Service: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant .
SIP Release Notes 46 Document #: LTRT-26901 CPE SIP Products 36. BRI Suspend-Resume Supplementar y Service: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 20.
Version 6.2 47 December 2010 SIP Release Notes 1. What's New in Release 6.2 38. MWI for BRI Interfaces: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2.
SIP Release Notes 48 Document #: LTRT-26901 CPE SIP Products 40. Interworking Date/Time between SIP and Euro-ISDN: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Med.
Version 6.2 49 December 2010 SIP Release Notes 1. What's New in Release 6.2 42. Redirect Number Over written by Destination Number for IP-to-Tel Calls: Product MP-11x MP-124 Mediant 600 Mediant 1.
SIP Release Notes 50 Document #: LTRT-26901 CPE SIP Products 44. Manipulation of Redirect Reason for Tel-to IP Call s: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG.
Version 6.2 51 December 2010 SIP Release Notes 1. What's New in Release 6.2 46. Response to SIP OPTIONS only if Trunk Group 1 is Available: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant .
SIP Release Notes 52 Document #: LTRT-26901 CPE SIP Products 1.2.3 SIP SAS New Features The device supports the following new SI P Standalone Survivability (SAS) appli cation features: 1.
Version 6.2 53 December 2010 SIP Release Notes 1. What's New in Release 6.2 3. SAS Normal Mode Routing Enhancem ent: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 M.
SIP Release Notes 54 Document #: LTRT-26901 CPE SIP Products 1.3 Session Border Controller New Features The device supports the following new Session Borde r Controller (SBC) features: 1.
Version 6.2 55 December 2010 SIP Release Notes 1. What's New in Release 6.2 4. SBC Registration Timers: Product Mediant 800 MSBG Mediant 1000 MSBG Mediant 3000/T P-6310 Mediant 3000 HA/T P-6310 M.
SIP Release Notes 56 Document #: LTRT-26901 CPE SIP Products 6. Max-For wards SIP Header Size: Product Mediant 800 MSBG Mediant 1000 MSBG Mediant 3000/T P-6310 Mediant 3000 HA/T P-6310 Mediant 3000/T P-8410 Mediant 3000 HA/T P-8410 Management Protocol Web INI SNMP EMS CLI This feature provides control over the SIP Max-Forwards header va lue.
Version 6.2 57 December 2010 SIP Release Notes 1. What's New in Release 6.2 8. Classifying IP Call to Proxy Set based on IP Address, Port, and Transport Ty pe: Product MP-11x MP-124 Mediant 600 M.
SIP Release Notes 58 Document #: LTRT-26901 CPE SIP Products 10. Mediation without Transcoding: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Mediant 3.
Version 6.2 59 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Value SIP Header Present in Received SIP Message Diversion History-Info Div ersion and History-Info HistoryInfoMode = Remove DiversionMode = A dd Not present. History-Info converted to Diversion.
SIP Release Notes 60 Document #: LTRT-26901 CPE SIP Products ♦ If the REGISTER is per the device’s cli ent (end point), it is the MAC address concatenated with the phone number of the client. ♦ If the REGISTER is per device, it is the MAC address only.
Version 6.2 61 December 2010 SIP Release Notes 1. What's New in Release 6.2 The “GATEWAY” type is necessary for request s representing multiple users, as the existing options above are not suitable: • The IP Group cannot be defined as a SE RVER since its destination addre ss is unknown during configuration.
SIP Release Notes 62 Document #: LTRT-26901 CPE SIP Products 16. General SBC Configuration Enghancements : Product Mediant 800 MSBG Mediant 1000 MSBG Mediant 3000/T P-6310 Mediant 3000 HA/T P-6310 Med.
Version 6.2 63 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.4 Media New Features The device supports the follo wing new media features: 1.
SIP Release Notes 64 Document #: LTRT-26901 CPE SIP Products Note: To use V.34, the relevant DSP template must be used. 3. G.722 Codec Support: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 8.
Version 6.2 65 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.5 PSTN New Features The device supports the follo wing new PS TN features: 1.
SIP Release Notes 66 Document #: LTRT-26901 CPE SIP Products 3. T310 Timer Configuration for ISDN Variant NI2: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant.
Version 6.2 67 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.6 Networking New Features The device supports the following new networkin g features: 1.
SIP Release Notes 68 Document #: LTRT-26901 CPE SIP Products 3. VoIP Firewall per Network Interface: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Medi.
Version 6.2 69 December 2010 SIP Release Notes 1. What's New in Release 6.2 5. Default Gateway per IP Interface: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG .
SIP Release Notes 70 Document #: LTRT-26901 CPE SIP Products 7. Increase in Maximum Call Control/Media Interfaces: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Med.
Version 6.2 71 December 2010 SIP Release Notes 1. What's New in Release 6.2 9. Internet Protocol Version 6 (IPv 6) Support: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant.
SIP Release Notes 72 Document #: LTRT-26901 CPE SIP Products 1.7 Data-Router New Features The device supports the followi ng new d ata-router features: 1.
Version 6.2 73 December 2010 SIP Release Notes 1. What's New in Release 6.2 3. Local-line Loopback on T1 WAN Inte rface: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 10.
SIP Release Notes 74 Document #: LTRT-26901 CPE SIP Products • crypto isakmp policy : defines an Internet Key Exchange (IKE) policy • crypto ipsec transform-set : defines a transform set of accept.
Version 6.2 75 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.8 Security New Features The device supports the followi ng new security feature: 1.
SIP Release Notes 76 Document #: LTRT-26901 CPE SIP Products 1.9 Infrastructure New Features The device supports the following new i nfrastructure features: 1.
Version 6.2 77 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.10 Management and Provisioning New Features 1.10.1 Web New Features The device supports the following new Web interface features: 1.
SIP Release Notes 78 Document #: LTRT-26901 CPE SIP Products 3. Reorganization of SIP Menus in Web Navigation Tree: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Me.
Version 6.2 79 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.10.2 SNMP New Features The device support s the following new Simple Network Manag ement Protocol (SNMP) features: 1.
SIP Release Notes 80 Document #: LTRT-26901 CPE SIP Products 1.10.3 CLI New Features The device supports the following new co mmand-lin e interface (CLI) features: 1.
Version 6.2 81 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.10.4 SSH New Features The device supports the following new Secu re Shell (SSH) features: 1.
SIP Release Notes 82 Document #: LTRT-26901 CPE SIP Products 3. SSH Last Login: Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Mediant 3000/T P-6310 Med.
Version 6.2 83 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.10.5 Utilities New Features The device supports the follo wing new ut ilities feature: 1.
SIP Release Notes 84 Document #: LTRT-26901 CPE SIP Products 1.11 New Parameters This section descri bes the new parameters for Relea se 6.2. The ini file parameter is enclosed in square bracke ts and if a corresp onding Web interface pa rameter exists, then this parameter appears above it.
Version 6.2 85 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Description Static NAT Table [NATTranslation] This ini file table parameter defines multiple NATs for SIP control a nd RTP media using Static NAT Rules.
SIP Release Notes 86 Document #: LTRT-26901 CPE SIP Products 1.11.1.2 SIP Gateway Parameters The table below describes the new SIP Gateway application parameters fo r Release 6.
Version 6.2 87 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Description [EnableSDPVersionNegoti ation] This feature enables the flexibility of ignoring a new S DP re-offer (from the media negotiation perspective) in certain scen arios (such as session expires).
SIP Release Notes 88 Document #: LTRT-26901 CPE SIP Products Parameter Description QoS statistics in SIP Release Call [QoSStatistics] Determines whether the device include s call quality of service (QoS) statistics in SIP BYE and SIP 200 OK response to BYE, using the proprietary SIP header, X-RTP-Stat.
Version 6.2 89 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Description value other than the default, the RTPOnlyMod e parameter value is ignored. [RTPOnly ModeForTrunk_I D] Enables the device to start sending and/ or receiving RTP packets to and from remote endpoints without the need to esta blish a SIP session.
SIP Release Notes 90 Document #: LTRT-26901 CPE SIP Products Parameter Description CRLF Keep-Aliv e Mode Parameters [UsePingPongKeepAliv e] Determines whether the carria ge-return and line-feed sequen.
Version 6.2 91 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Description R-Value Delay Threshold [VQMonEOCRValTHR] Voice quality monitoring - end of call low quality alert thre shold. if set to -1 (default), no alerts are issued.
SIP Release Notes 92 Document #: LTRT-26901 CPE SIP Products Parameter Description Cut Through Parameters [DigitalCutThrough] Enables PSTN CAS channels/endpoints to receive in coming IP calls even if the B-channels are in off-hook st ate.
Version 6.2 93 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.11.2 SBC New Parameters The table below describes the new SBC application parameters for Release 6.
SIP Release Notes 94 Document #: LTRT-26901 CPE SIP Products Parameter Description SBC Registration Timers SBC User Registration Time [SBCUserRegistrationTime] Defines the duration of the periodic registrations between the user and the SBC (SBC responds with this value to u ser).
Version 6.2 95 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.11.3 Media New Parameters The table below describes the new media parameters for Release 6.2. Notes: These parameters are applicable only to the Gateway application. Table 1-7: New Media Parameters for Release 6.
SIP Release Notes 96 Document #: LTRT-26901 CPE SIP Products 1.11.4 PSTN New Parameters The table below describes the new PST N parameters for Release 6.2. Notes: These parameters are applicable only to the Gateway application. Table 1-8: New PSTN Parameters for Release 6.
Version 6.2 97 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Description Call Forward on Busy [SuppServCodeCFB] Prefix code for activating Call Fo rward on Busy sent to the softswitch. The valid value is a string. The default is an empty st ring.
SIP Release Notes 98 Document #: LTRT-26901 CPE SIP Products Parameter Description BRI Supplementary Services Table [ISDNSuppServ ] This table configures the BR I endpoints and thei r authentication and caller ID settings.
Version 6.2 99 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.11.5 Networking New Parameters The table below describes the new networking parameters fo r Release 6.2. Notes: These parameters are applicable to the Gateway and SBC applications.
SIP Release Notes 100 Document #: LTRT-26901 CPE SIP Products Parameter Description [StaticRouteTable] This ini file table parameter conf igures the IP Routing table for defining static IP routing rule s. These rules can be as sociated with IP interfaces defined in the Multiple Interface table.
Version 6.2 101 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.11.6 Management and Provis ioning New Parameters The table below de scribes the new management an d provisioning parameter for Relea se 6.2. Notes: These parameters are applicable to the Gateway and SBC applications.
SIP Release Notes 102 Document #: LTRT-26901 CPE SIP Products 1.12 Modified Parameters This section descri bes parameters from the previous release that have been modified in Release 6.2. 1.12.1 SIP Parameters This section describes SIP parameters from the previous rel ease that have been modified in Release 6.
Version 6.2 103 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Description Proxy Set Table [ProxySet] Modifications: ClassificationInput (Median t 800 MSBG, Mediant 10.
SIP Release Notes 104 Document #: LTRT-26901 CPE SIP Products Parameter Description Outbound IP Routing Table [Prefix] Modification: PREFIX_DestSRD added. This ini file table parameter configures the Outbound IP Routing table for routing Tel-to-IP and IP-to-IP calls.
Version 6.2 105 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Description Trunk Group Settings Table [TrunkGroupSetting s] Modifications: New ChannelSele ctMode options: .
SIP Release Notes 106 Document #: LTRT-26901 CPE SIP Products Parameter Description [9] Ring to Hunt Group = The device allocates IP-to-Tel call s to all the FXS ports (channels) belonging to a spe cific Hunt Group.
Version 6.2 107 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Description Flash Keys Sequence Style [FlashKeysSequen ceStyle ] Modification: Option [2] added (MP-1xx, Mediant 600, Mediant 80 0 MSBG, Mediant 1000 MSBG, Mediant 1000).
SIP Release Notes 108 Document #: LTRT-26901 CPE SIP Products Parameter Description number of simultaneous, on-b oard 3-wa y conference calls, by using the parameter MaxInBoardConfe renceCalls . Notes: This parameter is applicable only to FXS interface s.
Version 6.2 109 December 2010 SIP Release Notes 1. What's New in Release 6.2 Parameter Description Voice Mail Interface [VoiceMailInterface] Modification: Option [8] ETS added (Mediant 600, Mediant 80 0 MSBG, Mediant 1000 MSBG, Mediant 1000).
SIP Release Notes 110 Document #: LTRT-26901 CPE SIP Products Parameter Description context=<gateway IP address>”. The <source trunk group ID> is the Trunk Group ID where incomin g calls from Tel is received.
Version 6.2 111 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.12.1.3 SIP SAS Parameters The table below describes the SIP SAS paramet ers from the previous release that have been modified in Release 6.2. Table 1-13: Modified SIP SAS Parameters for Release 6.
SIP Release Notes 112 Document #: LTRT-26901 CPE SIP Products 1.12.2 SBC Parameters The table below describes SBC parameters fro m the previous release that have been modified in Release 6.
Version 6.2 113 December 2010 SIP Release Notes 1. What's New in Release 6.2 1.12.3 Networking Parameters The table below descri bes networking param eters from the previous relea se that have been modified in Release 6.2. Notes: These parameters are applicable to the Gateway and SBC applications.
SIP Release Notes 114 Document #: LTRT-26901 CPE SIP Products 1.13 Obsolete Parameters The table below lists parameters fro m the previous release that are no w obsolete in Release 6.
Version 6.2 115 December 2010 SIP Release Notes 2. Supported Features 2 Supported Features This chapter describes various feat ures supported by the device. 2.1 SIP Gateway Features This section lists the SIP Gateway application’s main feature s. 2.
SIP Release Notes 116 Document #: LTRT-26901 CPE SIP Products DTMF out-of-band transfer using: • INFO method <draft-choudhuri- s ip-info-digit-00.txt> • INFO method, compatible with Cisco gateways • NOTIFY method <draft-mahy-sippin g-signaled-digits-01.
Version 6.2 117 December 2010 SIP Release Notes 2. Supported Features RFC Number RFC Title RFC 3578 Interworking of ISDN overlap sig nalling to SIP RFC 3581 Symmetric Response Routing - rpo rt RFC 360.
SIP Release Notes 118 Document #: LTRT-26901 CPE SIP Products RFC Number RFC Title RFC 4733 RTP Payload for DTMF Digits RFC 4961 Symmetric RTP and RTCP for NAT RFC 5022 Media Server Control Markup Lan.
Version 6.2 119 December 2010 SIP Release Notes 2. Supported Features 2.1.2 SIP Compliance Tables The SIP device complies with RFC 3261, as sh own in the following subsections.
SIP Release Notes 120 Document #: LTRT-26901 CPE SIP Products 2.1.2.3 SIP Headers The device supports the following SIP Headers: Table 2-4: Supported SIP Headers Header Field Supported Accept Yes Acce.
Version 6.2 121 December 2010 SIP Release Notes 2. Supported Features Header Field Supported Proxy- Authenticate Yes Proxy- Authorization Yes Proxy- Require Yes Prack Yes Reason Yes Record- Route Yes .
SIP Release Notes 122 Document #: LTRT-26901 CPE SIP Products 2.1.2.4 SDP Headers The device supports the following SDP Headers: Table 2-5: Supported SDP Headers SDP Header Element Supported v - Proto.
Version 6.2 123 December 2010 SIP Release Notes 2. Supported Features 2.1.2.5.1 1xx Response – Information Responses Table 2-6: Supported 1xx SIP Responses 1xx Response Supported C omments 100 Trying Yes The device generates this response upon receiving a Proceedi ng message from ISDN or immediately after placing a call for CAS signaling.
SIP Release Notes 124 Document #: LTRT-26901 CPE SIP Products 2.1.2.5.4 4xx Response – Client Failure Responses Table 2-9: Supported 4xx SIP Responses 4xx Response Supported Comments 400 Bad Request Yes The device doesn't generate this response.
Version 6.2 125 December 2010 SIP Release Notes 2. Supported Features 4xx Response Supported Comments 420 Bad Extension Yes The device doesn't generate this response. Upon receipt of this message and before a 200 OK ha s been received, the device responds with an ACK and disconne cts the call.
SIP Release Notes 126 Document #: LTRT-26901 CPE SIP Products 2.1.2.5.5 5xx Response – Server Failure Responses Table 2-10: Supported 5xx SIP Responses 5xx Response Comments 500 Internal Server Error Upon receipt of any of these Respo nses, the device releases the call, sending an appropriate release cause to the PSTN side.
Version 6.2 127 December 2010 SIP Release Notes 2. Supported Features 2.2 Supported PSTN-SIP Interworking Features Note: This section is applicable only to digital PSTN products (i.e., Me diant 600, Mediant 800 MSBG, Mediant 1000 MSBG, Mediant 1000, Mediant 2000, and Mediant 3000).
SIP Release Notes 128 Document #: LTRT-26901 CPE SIP Products Configurable channel -select mode per trunk group. Various number manipulat ion rules for IP-to-Tel and Tel-to-IP, called and calling numbers. Option to configure ISDN Tr ansfer Capability per trunk.
Version 6.2 129 December 2010 SIP Release Notes 2. Supported Features 2.3 Supported IP Media Features Note: This section is applicable only to Median t 1000 and Mediant 1000 MSBG. The Mediant 1000 and Mediant 1000 MSBG supp ort the following IP media features: VoIP Conference Bridge, supporting up t o 60 channels.
SIP Release Notes 130 Document #: LTRT-26901 CPE SIP Products 2.4 Supported Data-Router Features The supported data-router features are listed in the subse ctions below. Note: This section is a pplicable only to Mediant 800 M SBG and Mediant 1000 MSBG.
Version 6.2 131 December 2010 SIP Release Notes 2. Supported Features • EFM: ♦ ITU G.991.2 Annex E for Ethernet, also known as EFM or 2Base-TL, as defined in IEEE 802.3ah ♦ Up to 8 IP interfaces for EFM/2Base-TL ♦ IP QoS classification, Marking, scheduling and shapin g ♦ 802.
SIP Release Notes 132 Document #: LTRT-26901 CPE SIP Products 2.4.3 Data Security The device supports the following new data se curity features: 1. Zero Configuration Firewall wizard with three secu r.
Version 6.2 133 December 2010 SIP Release Notes 2. Supported Features 2.4.4 Supported RFC's The device materially supports the following RFC's: IP/Routing: • RFC 768 UDP • RFC 791 IP.
SIP Release Notes 134 Document #: LTRT-26901 CPE SIP Products 2.5 DSP Firmware Templates (Voice Codecs) This section lists the DSP templates and corre sponding voice codecs support.
Version 6.2 135 December 2010 SIP Release Notes 2. Supported Features 2.5.2 Mediant 600 a nd Mediant 1000 The device supports the following DSP firmware temp lates: Notes: • Installation and use of vocoders is subject to obtaini ng the appropriate license and to royalty payments.
SIP Release Notes 136 Document #: LTRT-26901 CPE SIP Products Table 2-14: DSP Firmware Templates for Mediant 600 and Me diant 1000 Digital Interfaces DSP Template 0 or 10 1 or 11 2 or 12 4 or 14 5 or .
Version 6.2 137 December 2010 SIP Release Notes 2. Supported Features Table 2-15: DSP Firmware Templates for Mediant 1000 MPM Module DSP Template 0 or 10 1 or 11 2 or 12 4 or 14 5 or 15 6 or 16 Assemb.
SIP Release Notes 138 Document #: LTRT-26901 CPE SIP Products 2.5.3 Mediant 800 MSBG The device supports the following DSP firmware cap abilities: Table 2-16: DSP Firmware Capabilities Telephony Ports.
Version 6.2 139 December 2010 SIP Release Notes 2. Supported Features 2.5.4 Mediant 1000 MSBG The device supports the following DSP firmware temp lates: Notes: • Installation and use of vocoders is subject to obtaini ng the appropriate license and to royalty payments.
SIP Release Notes 140 Document #: LTRT-26901 CPE SIP Products Table 2-18: DSP Firmware Templates for Mediant 1000 MSBG Digital Interfaces DSP Template 0 or 10 1 or 11 2 or 12 4 or 14 5 or 15 6 or 16 N.
Version 6.2 141 December 2010 SIP Release Notes 2. Supported Features Table 2-19: DSP Firmware Templates for Mediant 1000 MSBG MPM Module DSP Template 0 or 10 1 or 11 2 or 12 4 or 14 5 or 15 6 or 16 A.
SIP Release Notes 142 Document #: LTRT-26901 CPE SIP Products 2.5.5 Mediant 2000 The device supports the following DSP firmware temp lates: Notes: • Installation and use of vocoders is subject to obtaini ng the appropriate license and to royalty payments.
Version 6.2 143 December 2010 SIP Release Notes 2. Supported Features 2.5.6 Mediant 3000 The device supports the following DSP firmware temp lates: Notes: • Installation and use of vocoders is subject to obtaini ng the appropriate license and to royalty payments.
SIP Release Notes 144 Document #: LTRT-26901 CPE SIP Products Table 2-22: DSP Firmware Templates for Mediant 3000 16E1/ 21T1 DSP Template 0 1 2 4 5 7 9 10 11 Supplementary Capabilities Number of Chann.
Version 6.2 145 December 2010 SIP Release Notes 2. Supported Features 2.5.6.1 DSP Template Mix Feature for Mediant 3000 Mediant 3000 can operat e (and be loaded) with up to two DSP templates. The cha nnel capacity per DSP template is approximately 50%, with ali gnment to the number of DSP's present in the device.
SIP Release Notes 146 Document #: LTRT-26901 CPE SIP Products Reader’s Notes.
Version 6.2 147 December 2010 SIP Release Notes 3. Known Constraints 3 Known Constraints This section lists known constrai nts in Release 6.2. Note for Mediant 1000 MSBG: When upgrading from Version 5.8 to V ersion 6.0, ensure that you use firm ware file version F6.
SIP Release Notes 148 Document #: LTRT-26901 CPE SIP Products 3. The ICMP protocol is not supported. The device is unabl e to generate ICMP PING packets.
Version 6.2 149 December 2010 SIP Release Notes 3. Known Constraints 6. High Transcoding probabili ty (devices other than MSBG always perform transcodi ng). Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Mediant 3000/T P-6310 Mediant 30 00 HA/TP-6310 Mediant 3000/T P-8410 Mediant 30 00 HA/TP-8410 3.
SIP Release Notes 150 Document #: LTRT-26901 CPE SIP Products 3. The Transparent coder (RFC 4040) poses the followi ng limitations: • The coder can be used onl y when using physical termination s • No detection of IBS (e.g., DTMF) • Generation of IBS is only toward the network • No fax/modem detection or generation (i.
Version 6.2 151 December 2010 SIP Release Notes 3. Known Constraints 6. Announcements and streaming cannot be perfo rme d on IP-to-IP wideband calls. Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Mediant 3000/T P-6310 Mediant 30 00 HA/TP-6310 Mediant 3000/T P-8410 Mediant 30 00 HA/TP-8410 7.
SIP Release Notes 152 Document #: LTRT-26901 CPE SIP Products 10. EVRC Interleaving according to RFC 3 558 is supported only on the receiving side. Supporting this mode on the transmitting side is not mandato ry according to this RFC.
Version 6.2 153 December 2010 SIP Release Notes 3. Known Constraints 14. RTCP XR is not supporte d. Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Mediant 3000/T P-6310 Mediant 30 00 HA/TP-6310 Mediant 3000/T P-8410 Mediant 30 00 HA/TP-8410 15.
SIP Release Notes 154 Document #: LTRT-26901 CPE SIP Products 3. When configuring the framing metho d to 'E xtended Super Frame' (0) or 'Sup er Frame' (1), the framing method is converted to anot her framing method.
Version 6.2 155 December 2010 SIP Release Notes 3. Known Constraints 2. When the DS3 interface is not connected, a tru nk under this DS3 interface can appear in either LOF or AIS alarm state.
SIP Release Notes 156 Document #: LTRT-26901 CPE SIP Products 3. In STM-1 and OC3 configuratio ns, path alarms do not sho w the correct state if the higher level is not synchronized. For ex ampl e, if there is no LOS on both PSTN Port A and Port B, the path level displays "No Alarm".
Version 6.2 157 December 2010 SIP Release Notes 3. Known Constraints • SS7 and UAL configuration must be the sa me on devi ces that share the same Point Code. • On-the-fly configuration of a link (Cr eate/InService/Offline/Del ete) must be performed from the device that t he link physically belongs to.
SIP Release Notes 158 Document #: LTRT-26901 CPE SIP Products 3.4 IP Media Constraints This release includes the following kno wn IP media constraints: 1. Playback to the IP side of LBR Voice Prompts: • Sending DTMF signals p resent in the file as RFC 2833 is not supported during playback, i.
Version 6.2 159 December 2010 SIP Release Notes 3. Known Constraints 4. No option to detect the beginning and end of speech and therefore, the signal is unable to start or stop re cording accordingly.
SIP Release Notes 160 Document #: LTRT-26901 CPE SIP Products 3.5 Networking Constraints This release includes the followin g known networking con straints: 1. Enabling the UDP checksum calculation is not applied to CALEA and IP-to-IP calls with UDP connections .
Version 6.2 161 December 2010 SIP Release Notes 3. Known Constraints 4. Debug Recording: • Only one IP target is allowed. • Maximum of 50 trace rules are allowed simultaneou sly. • Maximum of 5 media stream recording s are allowed simultaneously .
SIP Release Notes 162 Document #: LTRT-26901 CPE SIP Products 3. Once SecureStartup mode is enabled, it can’t be di sabled correctly thereafte r. Attempting to revert to non-Secure startup ca uses all parameters to return to defaults.
Version 6.2 163 December 2010 SIP Release Notes 3. Known Constraints 3. During HA switchover, the APS active interface status (e.g., PSTN-B is currently “Active” and PSTN-A is “Inactive”) is no t transfe rred to the redundant blade. As a result, if the PSTN-B interface was active before switchover, PSTN-A can be active after switchover.
SIP Release Notes 164 Document #: LTRT-26901 CPE SIP Products 3.8 Infrastructure Constraints This releas e includes the following know n infrastruc ture constra ints: 1.
Version 6.2 165 December 2010 SIP Release Notes 3. Known Constraints • WebLogoText • UseWeblogo • UseProductName Product MP-11x MP-124 Mediant 600 Mediant 1000 Mediant 800 MSBG Mediant 1000 MSBG Mediant 2000 Mediant 3000/T P-6310 Mediant 30 00 HA/TP-6310 Mediant 3000/T P-8410 Mediant 30 00 HA/TP-8410 4.
SIP Release Notes 166 Document #: LTRT-26901 CPE SIP Products 3.9 Management Constraints 3.9.1 Web Constraints This release includes the following kno wn Web constraints: 1. Changing the RADI US state (from Onlin e to Offline and vice versa) does not fu nction correctly.
Version 6.2 167 December 2010 SIP Release Notes 3. Known Constraints 4. The Web Search feature may produce incorrec t search re sults. For example, a search result for the TLS version para meter direct s the user to the incorrect page in stead of the Security Settings page under the System men u.
SIP Release Notes 168 Document #: LTRT-26901 CPE SIP Products 8. A monitoring-only Web user (“User Monitor” ) is a read-o nly user that cannot perform any configuration or actions. Ho wever, some of the action buttons such as Burn and Submit are not disabled when in this mode.
Version 6.2 169 December 2010 SIP Release Notes 3. Known Constraints 12. On the 'Software Upgrade Wi zard' page, the software upgrad e process must be completed prior to clicking the Back b utton. Clicking the Back button before the wizard completes cause s a display distortion.
SIP Release Notes 170 Document #: LTRT-26901 CPE SIP Products 16. On some SS7 Web pages, all available buttons be come visible for a split second while the page is loaded, even though they should not appe ar.
Version 6.2 171 December 2010 SIP Release Notes 3. Known Constraints 3.9.2 SNMP Constraints This release includes the followin g known Simple Network Management Protocol (S NMP) constraints: 1. When configuring acSysInt erfaceTable using SNMP or the Web interface, validation is performed only after device reset.
SIP Release Notes 172 Document #: LTRT-26901 CPE SIP Products 4. In the DS3/E3 Current Table, the objec ts dsx3CurrentSEFSs and dsx3 CurrentUASs are not supported.
Version 6.2 173 December 2010 SIP Release Notes 3. Known Constraints 7. When defining or deleting SNMPv3 users, the v3 trap user must not be the first to be defined or the last to be deleted. If there are no non-default v2c users, this results in a loss of SNMP contact with the device.
SIP Release Notes 174 Document #: LTRT-26901 CPE SIP Products 3.9.3 CLI Constraints This releas e includes the following know n command-line interface (CLI) constrai nts: 1. When connecting to the device using Telnet (CLI), Syslog messa ges do not appear by default.
Version 6.2 175 December 2010 SIP Release Notes 4. Resolved Constraints 4 Resolved Constraints This section lists constraints from p rev ious releases that have been resolved. 4.1 SIP Resolved Constraints The following SIP constraints from p revious releases have been resolved: 1.
SIP Release Notes 176 Document #: LTRT-26901 CPE SIP Products 4.2 Web Resolved Constraints The following Web constraints from p revious releases have been re solved: 1.
Version 6.2 177 December 2010 SIP Release Notes 4. Resolved Constraints Reader’s Notes ..
Release Notes Ver. 6.2 www.audiocodes.com.
デバイスAudioControl VERSION 6.2の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
AudioControl VERSION 6.2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAudioControl VERSION 6.2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AudioControl VERSION 6.2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AudioControl VERSION 6.2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AudioControl VERSION 6.2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAudioControl VERSION 6.2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AudioControl VERSION 6.2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAudioControl VERSION 6.2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。