RCAメーカーRCU500の使用説明書/サービス説明書
ページ先へ移動 of 16
RCU500 Universal Remote Control • • • TABLE OF CONTENTS Button Description ..............................................2 Setting Up Your Universal Remote ..................3 Programming Your Universal Remote Programming with Code Search ......
Button Description • • • Code Search Button Programs devices by searching through brand codes. Use when code lists are not available or when the listed code does not work with your device. See page 4. Device Buttons ( VCR1, VCR2•LD, SAT•CABLE, AUDIO, TV) Determines which device you are controlling.
3 Place Batteries in the remote 1. Remove the battery compartment cover. 2. Place 4 AAA batteries as shown, matching the + and – end of each battery as indicated in the battery compartment. 3. Replace the cover. Determine if your remote needs programming Some RCA, GE and ProScan devices may already be preprogrammed.
4 Programming a Device using CODE SEARCH 1. Manually turn on your device (TV, VCR, Laserdisc Player, Satellite Receiver, Cable Box or Audio Equipment). 2 . Press and hold CODE•SRCH . 3. Press and release the device button you want to set up (TV, VCR1, VCR2•LD, SAT•CABLE, or AUDIO) .
5 Programming Y our Universal Remote Programming a Device using CODE LISTS 1 . Find codes for each device and brand on page numbers shown below. Device Page TV 12 VCR 13 LaserDisc Player 14 Satellite Receiver 14 Cable Box 14 Audio Equipment 15 2. Press and hold the TV, VCR1, VCR2•LD , SAT•CABLE , or AUDIO button you want to set up.
6 Turning the TV On and Off. 1. Press TV to set the remote to control the TV (Most RCA, GE and ProScan models will only turn on when TV is pressed, not POWER.) 2. Press POWER to turn the TV on or off. Change Channels on the TV Press CHANNEL UP or CHANNEL DOWN to change channels on the TV or enter the channels as you would normally for your TV.
7 Turning the Cable Box On and Off. 1. Point the remote at the cable box and press SAT•CABLE. 2. Press POWER to turn it on or off. Changing Channels on the Cable Box. Press CHANNEL UP or DOWN to change channels on the cable box or enter the channel as you would normally for your cable box.
Turn the VCR On and Off. 1. Press VCR1 or VCR2•LD to set the remote to control the VCR. (Most RCA, GE and ProScan models will only turn on when pressing VCR not POWER). 2. Press POWER to turn the VCR on or off. Using the VCR function buttons. 1. Turn on the VCR.
9 Turn the Laserdisc Player On and Off. 1. Press VCR2•LD to set the remote to control the Laserdisc Player. 2. Press POWER to turn the Laserdisc Player on or off. Using the Laserdisc Player function buttons. 1. Turn on the Laserdisc Player. 2. Place a disc in the Laserdisc Player.
10 RCA, GE, and ProScan televisions use three different menu systems. Read the following descriptions, and choose the one that matches your TV. System 1: If you use MENU, +, and – buttons on your cu.
11 Operating Y our TV/VCR Combo Unit Special Operations RCA, GE and PROSCAN Brand Devices: Many of these devices (TVs and VCRs) will not need to be programmed. In the event that programming is required, the code search method is suggested. Note: With these brands, the device button (TV, VCR1, VCR2•LD, AUDIO) will usually turn the units on.
12 TV Code List A–Mark ................................................102 Admiral ................................................005 Amtron .................................................064 Akai ...............................................002,103 Anam .
13 VCR Code List Admiral .......................................006 Aiwa ............................................015 Akai ..........003,017,022,023,063,066 Audio Dynamics .................014,016 Bell & Howell .............................002 Broksonic .
14 Cable Box Code List TV/VCR Combinations ABC .........................022,046,053,054 Anvision ...............................007,008 Cablestar ..............................007,008 Diamond .....................................056 Eagle ............
15 Audio Equipment Code List ADS AMP ......................................001 AIWA CD .........................................060 AKAI AMP ...............................002,008 DENON CD ........................................057 DYNAMIC BASS AM/FM .
W ORKS UP T O 5 VIDEO AND A UDIO COMPONENTS: More versatile than competitive models. Replace up to 5 remote controls...1 TV, 1 VCR, 1 VCR or Laser Disc Player, 1 Cable Box or Satellite Receiver and 1 Audio Component. Specially designed for home theatre.
デバイスRCA RCU500の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
RCA RCU500をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRCA RCU500の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。RCA RCU500の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。RCA RCU500で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
RCA RCU500を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRCA RCU500の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、RCA RCU500に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRCA RCU500デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
