AudiovoxメーカーCE620の使用説明書/サービス説明書
ページ先へ移動 of 22
.
- 1 - Follow the advice below for safe and appropriate operations. On Placement Do not use the unit in places which are extremely hot, cold, dusty , or humid.
- 2 - The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to persons.
- 3 - Power cord Connection 1. Make sure that all the components and speakers are connected correctly. 2. Check that the rated voltage of your unit matches your local voltage. Caution To prevent electrical shock, match wide blade of plug to wide slot, fully insert.
- 4 - Important Switch off the power before connecting speakers and other equipment. Speaker Cord Connections Connect the Red wires to the Red (+) terminals and the Black wires to the Black (-) terminals. Note: Connecting speakers other than the speakers supplied with the unit, may damage the unit.
- 5 - P ARTS IDENTIFICA TIONS 1) DISPLAY 2) CD DOOR 3) SKIP/TUNING buttons 4) RANDOM / REPEAT / CONFIRM / SLEEP buttons 5) POWER/STANDBY button 6) DEMO / FAVORITE button 7) DISC SKIP / CD OPEN/CLOSE buttons 8) PHONES jack 9) Cassette holder ( Deck A) 10) Cassette deck A operation controls RECORD button PLAY button REWIND button F.
- 6 - ADJUSTING THE SOUND WHEN RECORDING During tape recording, adjustments to the VOLUME and SOUND MODE controls will not effect the recorded signal. TO USE THE X-BASS Press the SOUND MODE button repeatedly, so that "X-BASS" appears on the display window.
- 7 - SETTING THE CL OC K 1. In standby mode, hold the SHIFT and press the CLOCK button. 5. Press the SET/PAUSE button. 6. Press the SKIP / buttons to adjust the hour. 7. Press the SET/PAUSE button. To see the time display: Hold the SHIFT and press the CLOCK buttons.
- 8 - SLEEP OPERATION The tuner, CD, tape and AUX can all be turned off automatically. 1. Playback the desired sound source. 2. Press the SLEEP button, so that SLEEP is displayed.
- 9 - AM Connect the loop aerial (provided) to the 'AM LOOP ANTENNA' snap terminals at the back of the unit. FM Fully unwind the wire antenna. Then extend the wire antenna and place it in the position that sounds best. NOTE: Do not connect to an outside antenna.
- 10 - PRESETTING ST A TIONS 1. Press the FUNCTION button to TUNER. 2. Press the DISPLAY/BAND button to select a band. 3. Tune into a station. 4. Press the PAUSE/SET button to store the station.
- 11 - DELETE THE PRESET ST A TION 1. Press the FUNCTION button to TUNER. 2. Select a preset station you want to remove. 3. Display the frequency band and frequency: Press the STOP button, so that the frequency is flashing. 4. While the frequency is flashing, press the SET/ PAUSE button to delete the preset station.
- 12 - 1. Press the FUNCTION button to CD. 2. Press the CD OPEN/CLOSE button to open the disc tray. 7. Press the PLAY button to start playback. To interrupt playback Press the II PAUSE/SET button and ' ' will be displayed. Press this button again to resume playing.
- 13 - LOCATING A PARTICULAR POINT IN A TRACK Press it once Note : Searching and skipping can be done during playback or pause stage but are effective for the currently selected disc only.
- 14 - COMP ACT DISC OPERA TION 2. Hold the SHIFT and press the numbered buttons 1-5 to select which disc for playback. PROGRAM PLAY You can play back the tracks on the CDs in the disc 1-5 positions in any order desired. By specifying the disc numbers from 1 to 5 and the tracks numbers from 1 to 99.
- 15 - COMP ACT DISC OPERA TION FAVORITE store Notes You can not use the FAVORITE play if it does not set the Favorite store. The favorite store up to 9 tracks can be played in preset order. The favorite store can not store same track. To cancel favorite function Press the CD OPEN/CLOSE button and press it again.
- 16 - 1. Press the FUNCTION button to TAPE. 2. Press the STOP/EJECT button and load a cassette into the cassette compartment of Deck A or Deck B. 4. Press the PAUSE button. 2. Insert a cassette in each deck. When the tape reaches its end During fast wind or regular play, the tape will stop automatically when its end is reached.
- 17 - 1. Cassette tapes have two erase-protection tabs - one for each side. To protect a recording from being accidentally recorded over or erased, use a screwdriver to remove one or both of the cassette tape's erase-protection tabs. 4. Press the PAUSE button .
- 18 - 2. Insert a tape into the cassette compartment. 4. Press the PLAY/PAUSE button of the CD player. TO INSTALL BATTERIES 1 . Open the battery door. RECORDING ---- DECK A ONL Y TO ERASE A RECORDED TAPE 1. Press the FUNCTION button to TAPE. 2. Insert a tape with the side you want to erase facing you.
- 19 - CAUSE (AND REMEDY) Press the VOLUME UP button. The headphones are connected. Disconnect them. Reset the unit by pressing the Power/Standby switch. Suddenly OFF when playing, the TIMER OFF function is activated. Press the STOP button until the 'TIMER OFF' indicator shows on the display.
- 20 - Power consumption 200W Power requirements AC ~ 100V 50/60Hz (Japan) AC ~ 110V/120 - 220/240 50/60Hz (Other countries) AC ~ 120V 60Hz (USA and Canada) AC ~ 220V 50Hz (Hong Kong and China) AC ~ 2.
- 21 - Printed in China 811-299691-050.
デバイスAudiovox CE620の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Audiovox CE620をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAudiovox CE620の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Audiovox CE620の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Audiovox CE620で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Audiovox CE620を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAudiovox CE620の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Audiovox CE620に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAudiovox CE620デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。