RuncoメーカーXP-65DHDの使用説明書/サービス説明書
ページ先へ移動 of 80
O WNER ’ S O PERATING M ANUAL XP-50DHD / XP-50DHDxa XP-65DHD / XP-65DHDxa XP-103DHD High Definition, 1080p Flat Panel Plasma Display with and Digital High Definition TM Controller with Vivix II TM T.
.
PlasmaWall XP Series Owner’s Operatin g Manual iii PRE L IMINAR Y THREE YEAR LIMITED WARRANTY For Plasma Displays Congratulation s on your pu rchase of a Ru nco video product and welcome to the Runco fam ily! We believe Ru nco produ ces “The World’s Fine st Home Thea ter Products.
iv PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECT LY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITE D WARRANTY.
PlasmaWall XP Series Owner’s Operating Ma nual v PRE L IMINAR Y To locate th e name and address of th e nearest Runc o Authorized Se rvice Center, o r for additiona l information ab out this Limited Warran ty, please call or w rite: RUNCO INTERNA TIONAL, INC.
vi PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Thank you for your purchase of this quality Runco product! It has been desig ned to provide you with the quality of video that i s expected in a home the ater. This manu al is your guide through the m enus and ope ration.
PlasmaWall XP Series Owner’s Operating Ma nual vii PRE L IMINAR Y Manufacture r’s Name: Runc o Internation al, a subsidiar y of Planar System s, Inc.
viii PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y NOTE: This equipment ha s been tested and found to comply with the limits for a Class B digi tal device, p ursuant to Par t 15 of the FCC Rules. T hese limits ar e designed to p rovide reason able protection against harmf ul interference in a residential installation.
PlasmaWall XP Series Owner’s Operating Ma nual ix 1 Table of Content s PRE L IMINAR Y THREE YEAR LIMITED WARRANTY ............... ................ ................ ................ .............. iii Important S afety In s truction s ...............
x PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Other Cons iderations ........... ................. ............ ................. ............ ............. .......... 21 Connections t o the PlasmaWall and DHD Controller ............
PlasmaWall XP Series Owner’s Operating Ma nual xi 1 Li s t of Figure s PRE L IMINAR Y 2-1. PlasmaWall XP-50 DHD Front-Pane l Controls and Ind icators ......................... ............... 5 2-2. PlasmaWall XP-65 DHD Front-Pane l Controls and Ind icators .
List of Figures xii PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Note s :.
PlasmaWall XP Series Owner’s Operating Ma nual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manu al describes how to install, set up and operate a Run co PlasmaWall XP Series Flat-Panel Plasm a Display Monitor and DHD Controller (Mod el XP-50DHD, XP-50DHDxa, XP-65DHD, XP-6 5DHDxa or XP-103DHD).
Introduc tion 2 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y G raphic Convention s : These symbols appear in numerous p laces throug hout the manual, to emp hasize points th at you must k eep in mind to avoid problem s with your equipment o r injury: 1.
Introd uction PlasmaWall XP Series Owner’s Operating Ma nual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The PlasmaWa ll XP Series F lat-Panel Plasma Displ ay Monitor and DHD Controller establish a highe r threshold for flat panel display products.
Introduc tion 4 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Parts List Your PlasmaWall is shipped with the follow ing items. If any items are m issing or da maged, please contact y our Runco de aler or Runco C ustomer Service a t (800) 23-RUNCO .
PlasmaWall XP Series Owner’s Operating Ma nual 5 PRE L IMINAR Y 2.1 PlasmaWall at a Glance Controls and Indicators Figure 2-1, Fig ure 2-2 an d Figure 2-3 show the Pla smaWall fro nt-panel contr ols and indicators. Figure 2-1. Pla s maWall XP-50DHD Front-Pan el Control s and Indicator s Figure 2-2.
Controls and Functions 6 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Figure 2-3. Pla s maWa ll XP-103DHD Front-Pa nel Control s and Indica tor s 1. DI S PLA Y S TA N D Optional accessory for table-top installations. 2. POWER BUTTON Connects or disc onnects th e display pan el from the AC power sourc e.
Controls and Functi ons PlasmaWall XP Series Owner’s Operating Ma nual 7 PRE L IMINAR Y Connectors Figure 2-4 sho ws the rear-pane l connector lo cations on the PlasmaWall.
Controls and Functions 8 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 1. S LOT 1 Not used. 2. S LOT 2 (DVI-D or Dual HDMI input) HDCP-complian t digi tal video input(s). Connect the HDMI ou tput from th e DHD Controller to thi s input.
Controls and Functi ons PlasmaWall XP Series Owner’s Operating Ma nual 9 PRE L IMINAR Y 4. V A CUUM FLUOR E S CENT DI S PLA Y Can be used instead of the On-Screen Displ ay (OSD). Displays curre ntly-selected menu or – if no menu is selecte d – the curr ent source, signa l format (NTS C or PAL) and aspect ratio.
Controls and Functions 10 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 2.3 DHD Controller Rear Panel Figure 2-6 show s the rear conn ector panel on th e DHD Controller . Figure 2-6. DHD Controller Rear Panel Outputs 1. HDMI OUT Connect this t o the S LOT 2 input on the Pla smaWall (see Figure 2-4 ).
Controls and Functi ons PlasmaWall XP Series Owner’s Operating Manual 11 PRE L IMINAR Y 8. ComLink (R S -232) OUTPUT Connect this to the ComLink (RS-23 2) input on t he projector, u sing the prov ided communication cable. 9. IR Wired input from a wired remote con trol or infrared re ceiver.
Controls and Functions 12 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 2.4 DHD Controller Remote Control Figure 2-7 sho ws the DHD Co ntroller re mote contro l, and the pa ragraphs th at follow describe its fun ctionality. Figure 2-7.
Controls and Functi ons PlasmaWall XP Series Owner’s Operating Manual 13 PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is pre ssed to indic ate that an IR signal is bein g transmitt ed. 2. ON / OFF Press to turn the Pla smaWall on or off.
Controls and Functions 14 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 10. A s pect Ratio S election Button s Use the red but tons to select an aspect ra tio directly or t o enter num eric characters, as follows: 16 : 9 (3) For viewing 16:9 DVDs or HDT V programs in their n ative aspect ra tio.
PlasmaWall XP Series Owner’s Operating Manual 15 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press down the tab on the cover and pull the cove r in the dire ction of the arrow. 2. Insert th e included batte ries.
Installation 16 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y • Do not drop the remote control or expose it to moisture or hig h temperatu re. • The remote contr ol may malfunctio n under a fluoresc ent lamp. If that occur s, move the plasma display away f rom the fluoresc ent lamp.
Installation PlasmaWall XP Series Owner’s Operating Manual 17 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick ove rview of the PlasmaWa ll installation process . The sections following this one pr ovid e detailed ins tructions. Installation shou ld be performed by a quali fied custom video installation specialist.
Installation 18 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 3.3 Installation Considerations Proper installation of your PlasmaWall will ensure the highest possi ble picture quality.
Installation PlasmaWall XP Series Owner’s Operating Manual 19 PRE L IMINAR Y You can attac h your optional m ounts or sta nd to the PlasmaW all in either of two ways: • While it is upright.
Installation 20 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Figure 3-2. Ventila tion Requirement s for Enclo s ure Mounting (XP-50DHD and XP-65DHD) Figure 3-3. Ventila tion Requirement s for Enclo s ure Mounting (XP-103DHD) 50 mm (2") 50 mm (2") 50 mm (2") W all W all 50 mm (2") 50 mm (2") 300mm (11.
Installation PlasmaWall XP Series Owner’s Operating Manual 21 PRE L IMINAR Y Other Considerations Here are some other co nsiderations and tip s that can help improve yo ur installation, avoid damage and prolo ng operating life: • Keep the ambi ent temperature constant and belo w 35°C (95°F).
Installation 22 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 3.4 Connections to the PlasmaWall and DHD Controller Proceed as follo ws to connect the PlasmaWall to t he DHD Controller , your video sourc es, external cont roller(s) – if present – and AC pow er.
Installation PlasmaWall XP Series Owner’s Operating Manual 23 PRE L IMINAR Y Figure 3-5. Connect ing the Pla s maWall (DVI Ver s ion) to the DHD Controller Pb Pr Y Video 3 IR RS-232 Control S-Video .
Installation 24 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Digital Video Connection: The PlasmaWall has a dua l HDMI input board, la beled HDMI ( S LOT 2) . Connect the HDMI output from the DHD Controller to inpu t “A” on this board , using an HDMI-to-HDMI cable.
Installation PlasmaWall XP Series Owner’s Operating Manual 25 PRE L IMINAR Y Connecting Source Components to the DHD Controller Connect your vid eo sources to t he DHD Controller a s shown and d escribed in th e sections that follow. HDMI Connection s : See Figu re 3-7.
Installation 26 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Digital (DTV) R G B Connection s : See Fig ure 3-8. Figure 3-8. Digital (DTV) R G B Connection s HD1 HD2 G/Y INPUTS HV R/.
Installation PlasmaWall XP Series Owner’s Operating Manual 27 PRE L IMINAR Y Analog (Computer) R G B Connec tion s : See Figure 3-9. Figure 3-9. Analog R G B Connec tion s 1. Refer to Plasm aWall Specifications on page 61 for a list of computer signal s compatible w ith the PlasmaWall.
Installation 28 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Compo s ite/ S -Video/Component Video Co nnection s : See Figure 3-10. Figure 3-10.
Installation PlasmaWall XP Series Owner’s Operating Manual 29 PRE L IMINAR Y RS-232 Controller Connection Use a standard , 9-pin RS-232 cable to connec t a PC or home th eater cont rol/automat ion system (if present) to the RS-232 Control port on the DHD Controller; see Figure 3-11 .
Installation 30 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Connecting an External IR Receiver to the DHD Controller If infrared sign als from the r emote control cannot reach the D.
Installation PlasmaWall XP Series Owner’s Operating Manual 31 PRE L IMINAR Y Connecting AC Power Plug the female end of the p ower cord into the AC recep tacle on the r ear of the PlasmaWall. Connect t he other end t o your AC power source. (The X P-103DHD requires 200-240 VAC.
Installation 32 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Cable Management To reduce ca ble clutt er, use the c able clamps pr ovided with th e PlasmaWall to bundle the video, audio an d control cables at the back of the di splay.
PlasmaWall XP Series Owner’s Operating Manual 33 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your source co mponents. 2. Press the main power s witch on the Pla smaWall (see Figure 2-1 , Figure 2-2 or Figure 2-3 ). The st andby/on ind icator lights gr een.
Operation 34 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 2. Double c lick on th e Di s play icon. 3. Click the S etting s tab on the display dial og box. 4. Set the S cr een are a to 1024x768 pixels. 5. Click the Advanced button and click the Monitor tab on the dia log box.
Operation PlasmaWall XP Series Owner’s Operating Manual 35 PRE L IMINAR Y 4.3 Using the DHD Controller Menus Press the MENU button on either the rem ote control or the DHD Contr oller front panel to display the Main Me nu.
Operation 36 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Figure 4-1. DHD Co ntroller O S D Menu S tructure for Pla s maWall S ervice Test Vide o Grey Bars 1 Grey Bars 2 Color Bars 1.
Operation PlasmaWall XP Series Owner’s Operating Manual 37 PRE L IMINAR Y Main Menu The Main Me nu is the startin g point for accessing all di splay functions. (The Calibration and Service m enus are hidd en and not accessible un til you enter a passcode.
Operation 38 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio Remote Control Key De s cription 16:9 16:9 Select 1 6:9 to vi ew 16:9 D VDs and HDTV programs in their native aspec t ratio.
Operation PlasmaWall XP Series Owner’s Operating Manual 39 PRE L IMINAR Y Picture Use the contro ls in the Picture Me nu to calibrate the analog inputs on the PlasmaWall for optimum picture qu ality. The PlasmaWall has be en designed to incorporate set up and calibra tion standards establishe d by the Imaging Science Foundation (ISF ).
Operation 40 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y PLUGE patterns v ary but gene rally consist of some comb ination of b lack, white an d gray areas against a bla ck background . The example above include s two vertical bars and four shaded boxes.
Operation PlasmaWall XP Series Owner’s Operating Manual 41 PRE L IMINAR Y Color S aturation: On your external tes t pattern source , select a c olor bar patter n like the one shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint Select Color and press ENTER .
Operation 42 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y S harpne ss : “Sharpness” is th e amount of high-frequen cy detail in the ima ge. To ad just sharpness, select Shar pness from the Pictur e menu and press ENTER . On your external test pattern source, sele ct a patte rn like the one shown in Figure 4-5 .
Operation PlasmaWall XP Series Owner’s Operating Manual 43 PRE L IMINAR Y Over s can: Image Overscan push es the outsid e edge of the ac tive picture ar ea of the video signal out beyond the edge of the display area.
Operation 44 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Calibration Use the Calibration men u to perform advance d picture quality adjust ments on the analog inputs. Thi s menu s hould be u s ed by I S F-certif ied technician s only .
Operation PlasmaWall XP Series Owner’s Operating Manual 45 PRE L IMINAR Y I S F Night - Input Color: The Input Color controls are simila r to those in the Display Color menu (see above ), but adjust th e color balance at the DHD Controller (as opposed to the display device).
Operation 46 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y • Runco/I S F Logo S pla s h S cr een Timer s : When you turn on the Plasma Wall, it projects a welco me screen with the Runco lo go followed by o ne with the ISF lo go.
Operation PlasmaWall XP Series Owner’s Operating Manual 47 PRE L IMINAR Y Remote Control: The Remote Control menu sh ows you the p rimary and second ary infrared (IR) code s to which the DHD Controller w ill respond. By default, bot h are set to 17.
Operation 48 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Di s play Devi ce: The option s in the Display Device menu allow you to perfor m certain adjustments a t the plasma d isplay.
Operation PlasmaWall XP Series Owner’s Operating Manual 49 PRE L IMINAR Y HD Format: If the characteristic s of the inco ming signal on the HD1 or HD2 inputs are known, select HD Fo rmat from the Servic e menu and set th em as described below.
Operation 50 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y S y s tem Re s et: To reset ALL DHD Controller settings (including image settings ) back to their factory defaul ts, choose System Reset from the Servic e menu.
PlasmaWall XP Series Owner’s Operating Manual 51 PRE L IMINAR Y 5.1 Cleaning Regular cleaning will extend the life and performan ce of the Plasm aWall.
Maintenance and Troublesh ooting 52 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guideline s for troubleshootin g problems you may encounter w ith the Plasma Wall.
Maintenance and Troubleshooting PlasmaWall XP Series Owner’s Operating Manual 53 PRE L IMINAR Y RGB-HD images appear “noisy.” • Clock and Phase settings need adjustment. • Adjust Cl ock and Phas e settings (refer to ISF Night - Input Color on page 45 ).
Maintenance and Troublesh ooting 54 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Note s :.
PlasmaWall XP Series Owner’s Operating Manual 55 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the PlasmaWall with a home th eater automation/contr ol system or a PC running te rminal emula tion software, connect it to the RS-2 32 output of the DHD Controller as show n in Figure 3- 5 .
Serial Communications 56 PlasmaWall XP Series Owner’s Operating Manual P RELI M INARY Table 6-1 lists the RS-232 comm and set. The “Par ameter (min /max)” column shows the valid parameter ranges, or “NA” for comm ands that take no para meters.
Serial Communications PlasmaWall XP Series Owner’s Operating Manual 57 PRE L IMINAR Y Picture Adju s t Command s (not available on HDMI 1 or HDMI 2 input s ) BRIGHTNESS -100/100 YES Sets a value for.
Serial Communications 58 PlasmaWall XP Series Owner’s Operating Manual P RELI M INARY Input Po s ition Command s (not available on HDMI 1 or HDMI 2 input s ) IHEIGHT -100/100 YES Sets the value for .
Serial Communications PlasmaWall XP Series Owner’s Operating Manual 59 PRE L IMINAR Y Mi s cellaneou s Command s (not available on HDMI 1 or HDMI 2 input s ) BKGND -100/100 YES Sets the background c.
Serial Communications 60 PlasmaWall XP Series Owner’s Operating Manual P RELI M INARY The following serial commands a re meant to emul ate buttons on the remote contro l or DHD Con - troller front panel. Each button has its own serial command, so effe ctively it is as if you were using the IR remote only you’ll be doing so via se rial commands.
PlasmaWall XP Series Owner’s Operating Manual 61 PRE L IMINAR Y 7.1 PlasmaWall Specifications Table 7-1 lists the Plas maWall specifications. 7. S pecification s Table 7-1. Pla s maWall S pecification s Native Re s olution: 1920 x 1080 S creen S ize: XP-50DHD / XP-50DHD x a: 43.
Specifications 62 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y 7.2 DHD Controller Specifications Table 7-2 lists the DHD Controller specifications. Limited Warranty: Three (3) years parts and labor from the date of delivery to the end user (except for plasma glass panel).
Specifications PlasmaWall XP Series Owner’s Operating Manual 63 PRE L IMINAR Y 7.3 PlasmaWall Dimensions Figure 7-1, Fig ure 7-2 and Figure 7 -3 show the PlasmaWall dim ensions (all dime nsions are in inches). Figure 7-1. Pla s maWall Model XP-50DHD Dimen s ion s (with Optional Table S tand) 30.
Specifications 64 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Figure 7-2. Pla s maWall Model XP-65DHD Dimen s ion s (with Optio nal Table S tand) 0 1.7 2.5 35.0 37.5 1.1 18.7 0 7.4 8.8 10.0 31.2 62.3 59.8 2.5 65.4 17.0 7.0 4.5 2.1 4.
Specifications PlasmaWall XP Series Owner’s Operating Manual 65 PRE L IMINAR Y Figure 7-3. Pla s maWall Model XP-103DHD Dimen s ion s (with Floor S tand) 102.500 87.875 96.125 89.375 50.750 59.500 40.000 5.375 21.500 12.625 11.875 69.000 5.250 33.000 16.
Specifications 66 PlasmaWall XP Series Owner’s Operating Manual PRE L IMINAR Y Note s :.
.
Runco CL-810 Owner’ s Operating Manual Runco International • 2900 Faber S treet • Union City , CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www .
デバイスRunco XP-65DHDの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Runco XP-65DHDをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRunco XP-65DHDの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Runco XP-65DHDの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Runco XP-65DHDで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Runco XP-65DHDを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRunco XP-65DHDの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Runco XP-65DHDに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRunco XP-65DHDデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
