RussoundメーカーCAM6.6の使用説明書/サービス説明書
ページ先へ移動 of 116
CAM6.6 Six-Zone, Six-Source Controller CAM6.6T Six-Zone, Six-Source AM/FM Receiver INSTRUCTION MANUAL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER - SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL.
T ABLE OF CONTENTS 3 USER SECTION Pr oduct Introduction ............................................................................................................................5 Component Guide CAM6.6 Controller ...................................
T ABLE OF CONTENTS Speaker Connections ........................................................................................................................36 Zone Fixed/Variable Audio Output ........................................................
5 PRODUCT INTRODUCTION Thank you for choosing the Russound ® CAM6.6 multisource, multizone contr oller to enhance your home with distributed audio. This controller’ s state-of-the-ar t features and components blend seam- lessly with your unique lifestyle and prefer ences.
6 USER COMPONENT GUIDE CAM6.6 Contr oller-Fr ont Panel MAIN POWER SWITCH - Supplies power to the CAM6.6 ROOM LED ON/OFF INDICA TORS - Indicates when a room is on (gr een) or off (red) 1 2 2 1 Main Power and Zone Status The power switch for the CAM6.6 controller is “on” in the up position.
7 USER COMPONENT GUIDE UNO-S1 Keypad LCD P ANEL - 5-character backlit display shows status of the room, sour ce, volume, and more SOURCE SELECT BUTTON - Scrolls thr ough the sour ces directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, tr eble, etc.
8 CD PLAYER 1 LCD P ANEL - 12-character backlit display shows status of the room, sour ce, volume, and more SOURCE SELECT BUTTON - Scrolls thr ough the sour ces directly connected to the CAM6.6. Press and hold brings up the USER MENU for loudness, bass, tr eble, etc.
9 USER COMPONENT GUIDE UNO-TS2 T ouchscreen IR RECEIVER - Receives IR signals and passes them to the contr oller and source equip- ment. Also used when operating the touchscreen by using the SRC2 r emote TOUCHSCREEN - Full color resistive touchscr een with multi-sound feedback.
10 USER COMPONENT GUIDE SRC2 Remote Contr ol 1 4 4 7 7 2 5 8 3 3 6 9 11 10 6 9 1 2 5 8 10 11 POWER - T urns r oom or Local Source on and off. RUSSOUND DEVICE BUTTON - Used for SRC2 control of zone keypad. NUMBER BUTTONS - Buttons (0-9) for direct selection of channels or discs.
11 Room On/Off Press and r elease to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’ s room, and any pr esets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc. P r ess and release to turn off the UNO System Keypad.
12 USER USER MENU SETTINGS UNO-S1 User Menu Operation The User Menu allows the user to adjust the audio properties and contr ol functions of a par- ticular room.
13 USER OPERA TION UNO-S2 Keypad Button Function Room On/Off Press and r elease to turn on the UNO System Keypad. This also turns on the corre- sponding CAM6.6’ s room, and any pr esets previ- ously assigned will be activated, including set- tings for bass, volume, last source selected, etc.
The User Menu allows the user to adjust the audio properties and contr ol functions of a par- ticular room. The following keys are used to navigate and make changes while using the User Menu: T o enter the User Menu, press and hold during normal operation.
USER OPERA TION UNO-TS2 T ouchscreen Button Function Room On/Off T o turn on the room and the touchscr een, touch the UNO-TS2 screen anywher e, or pr ess and release the power button. Any pr esets pr eviously assigned will be activated, including settings for bass, volume, last source selected, etc.
The Options button on the home screen brings up room setting options and scr een adjustments. (For more detailed information, consult the UNO-TS2 Instruction Manual) Features T urn On V olume - This sets the room’ s default vol- ume when the room is turned on.
17 USER INTERNAL SOURCE - AM/FM TUNER UNO-S1 Keypad Contr ol UNO-S1 Keypad Contr ol of T uner Selecting the tuner On the UNO-S1 keypad, press to select the AM/FM tuner by choosing the tuner’ s preas- signed source number (1). Selecting the desired fr equency Press and hold or to activate manual tuning.
18 USER INTERNAL SOURCE - AM/FM TUNER UNO-S2 Keypad Contr ol UNO-S2 Keypad Contr ol of T uner Selecting the tuner On the UNO-S2 keypad, press to select the AM/FM tuner by choosing the tuner’ s preas- signed source number (1). Selecting the desired band Push to toggle between AM band and FM band reception.
19 92.5 MHz FM TUNER SELECTION - Select source number assigned to AM/FM TUNER (1) TUNE UP/DOWN - Used for manual station selection SELECT - Selects AM or FM band SEEK - (press) Seeks next higher tuned.
20 USER INTERNAL SOURCE - AM/FM TUNER UNO-TS2 T ouchscreen Contr ol UNO-TS2 Contr ol of T uner Selecting the tuner On the UNO-TS2 touchscreen home page, pr ess the named source button to select the AM/FM tuner . Selecting a Bank From the “1 of 3” tuner scr een, select the bank by scrolling using the forwar d/back arr ow next to the bank name.
21 USER INTERNAL SOURCE - AM/FM TUNER UNO-TS2 T ouchscreen Contr ol 1 of 3 T uner 1 Dad’ s Music WBZ 1030 102.5 Class WEEI 850 107.1 MHz FM 89.7 NHPR 105.
USER INTERNAL SOURCE - AM/FM TUNER SRC2 Remote Contr ol SRC2 Contr ol of T uner Selecting the tuner T o select the tuner , push to toggle through sources and choose the sour ce number preassigned to the AM/FM tuner (1), or use the UNO numeric source inputs at the bottom of the SRC2.
23 USER INTERNAL SOURCE - AM/FM TUNER SRC2 Remote Contr ol POWER - Power managed by CAM6.6 NUMERIC INPUT - (press) Number buttons for direct input of fr equency MEMORY PRESETS - (pr ess and hold) Numb.
INST ALLER SECTION Getting Star ted Includes an installation overview , including tools needed and connection tips. Component Guides Reviews front and back panel featur es of the CAM6.6 contr oller and the UNO keypads. Keypad Installation Explains UNO keypad installation and wiring.
25 INST ALLER GETTING ST ARTED Unpacking the System Components • Keep the original carton and packing materials for future shipment or storage. • Check for any visible signs of damage. If you encounter any concealed damage, con- sult your Russound dealer before pr oceeding to install the unit.
26 17 16 14 12 13 15 19 18 20 CAM6.6 RNET LINK IN AND LINK OUT - Links multiple CAM6.6’ s, also links future Russound components that are RNET compatible RS-232 INTERF ACE - The RS-232 Inter face allows the zones to be controlled by PC or other devices that have an RS-232 Interface.
27 OPTIONAL INTERNAL SOURCE - Factory installed optional internal source, AM/FM radio module AC 240V-AC 110V Switch - Switches A/C input voltage between 110VAC and 240VAC AC 120/240 INPUT - Grounded 3-terminal plug detachable power cor d connection for the CAM6.
28 INST ALLER COMPONENT GUIDE UNO Keypad Update Port 2 OS UPDA TE PORT- Connection for programming cable used to update UNO keypad OS software. SETUP BUTTON - Activates Installer Setup mode and access.
UNO-S2 UNO-S1 KORE A EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver OS UPDA TE JUMPER - Selects mode “Run” (one pin covered) or “OS Update” (two pins cover ed). Jumper setting must be in “Run” position for keypad operation.
30 Wire Length T o determine the amount of CA T-5 wir e r equired for the system installation, first decide how many keypads will be used, then determine the distance between each intended keypad location to the intended CAM6.6 location. The maximum recommended wir e run length is 250 feet for each UNO keypad.
The UNO-S2 keypad has an External IR Receiver IN terminal for connecting an external IR receiv- er such as the Russound SaphIR 858, 862 Eye, or 860 Phantom. Use 2 twisted pair wire with one pair connecting GND (GROUND) and IR (SIG- NAL) and the other pair connecting ST (ST A TUS) and V+ (+12VDC).
32 INST ALLER UNO KEYP AD INST ALLA TION Keypad Location The best infrared r emote performance is achieved with the keypad away from any dir ect sunlight, plasma TV , and low voltage lighting controls. Also consider convenience when choosing a location.
33 CAM6.6 CA T-5 Cable CA T-5 Cable PM Mod 3D with RJ-45 CA T-5 Cable SA-ZX3 1201A/1A Pow er Supply CAM6.6T The UNO System Keypad Ports are located on the back of the CAM6.6 in the top left of center . Connections made at the UNO Keypad Ports are made using CA T-5 T568A RJ-45 wir e configura- tion.
Source Audio Connections The CAM6.6 supports up to six audio sources. The Source Inputs ar e located at the back panel. For the CAM6.6 (no internal source installed), the switch next to Source 1 input must be set to “Input.” Connect each source output using quality RCA signal cables.
INST ALLER MAKING CONNECTIONS Common IR Connection Common IR Connections The Common IR jack on the rear of the CAM6.6 allows control of any sour ce equipment without that source being selected on the keypad. The connection for the COM IR jack is made using an IR emitter with a 1/8’’ plug.
36 The speakers are connected to the CAM6.6 using modular snap connectors. Each of these color-coded connectors is designated for the speaker set of a particular amplified zone. T o avoid confusion, connect one zone speaker set at a time starting with Zone 1, taking care to keep zone and speaker wire identities straight.
37 The CAM6.6 has two Zone Audio outputs, on Zone 1 and Zone 2. Each of these zone audio output connections features a ster eo line out RCA connection plus a switch to allow for either a fixed or a variable line level output. When set to V ariable, the keypad volume level affects this output.
38 CAM6.6 12VDC Home Theater T rigger In This 12VDC T rigger input is used to control Power Management of the audio sources possibly being shared with a home theater system. When the last zone on the CAM6.6 is turned off, 12VDC presence to the trigger input will pr event the sources that ar e on fr om being turned of f.
39 12VDC Mute T rigger In When 12VDC is applied to the Mute T rigger In, the system will fully mute any source that is con- nected to the Source Audio Input. The connec- tions for the trigger are made using a two-con- ductor cable with 1/8” male mini-plug jacks.
40 The RNET Link In and Link Out can be used to connect two to six CAM6.6 or CAV6.6 con- trollers. The connection is made using a CA T -5 patch cable from the Link Out of the master CAM6.6 and into the Link In of the next con- troller . Along with RNET data signals, the RNET Link In and Link Out jack passes the six source IR signals.
41 The CAM6.6 supports RS-232 communication with various third party automation systems or PC for programming of the contr oller . The RS-232 com port is located on the back of the CAM6.6 and uses a DB-9 cable connection. For RS-232 protocol and the backup PC applica- tion, go to www .
42 INST ALLER MAKING CONNECTIONS Optional Internal Source - AM/FM T uner Antennas AM Antenna Connect the included loop antenna for AM recep- tion to the Optional Internal Source panel, attach- ing the GND (ground) and AM ends to the appr o- priately marked connections.
43 Connecting an Alternate Outdoor Antenna for AM/FM The diagram below depicts a suggested installa- tion option of an alternate outdoor FM antenna and AM antenna. For best performance for AM reception, it is r ec- ommended to use an external outdoor or attic- mounted long wire antenna for best performance for AM reception.
44 Gr ounding an Outdoor Antenna If the tuner is used with an outdoor antenna, the antenna must be grounded against static char ges and voltage sur ges. Consult the instruc- tions that came with the antenna or contact the antenna manufacturer for pr oper installation instructions.
45 Before pr oceeding to the system pr ogramming section, it’s important to conduct an initial test to determine that the hardwar e components ar e working properly . 1. Connect the speaker wires fr om Zone #3 to the CAM6.6 Zone #3 speaker output connectors.
46 This manual includes items that are designed to assist in the pr ogramming pr ocess. Forms (Pages 106-108) Three blank r epr oducible forms are included as planning tools when determining sour ces, settings and zone prefer ences.
3. Basic Setup (SOURCE SETUP) (Pages 51-53) This procedur e is mandatory to set up each sour ce for keypad source contr ol and is the cornerstone of the programming pr ocess. 4. Peripheral Setup (Pages 49-51) (FOR OPTIONAL INTERNAL SOURCE) This procedur e pr ovides setup and naming procedur es for the tuner .
48 There ar e thr ee item types in the installation menu: Menu – “ Folder” that holds procedur es and/or featur e options. Pr ocedure – A series of steps to perform a guided operation, such as configuring a button. Feature – The actual settings that will change the system configuration.
49 The following items make up the Installation Menu: PERIPH SETUP (Per Su) SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) PERIPH SETUP (PerSu) Note: For CAM6.6, Peripheral Setup is not applicable.
INST ALLER INST ALLA TION MENU 2. BANK NAME – Use the volume up/down keys to select a character and left/right (BnkNm) keys to change a character position. A blinking cursor indicates placement of the character being entered. Names can be fr om 1 to 5 characters in length.
51 INST ALLER INST ALLA TION MENU SYSTEM INFO (SInfo) System Info shows the tuner’ s manufacturing build properties. See Periph Setup - Flow Chart on page 65 BUILD TIME (BTime) BUILD DA TE (BDate) VERSION (V er) 1. BUILD TIME Displays the firmware Build Time of the tuner .
52 INST ALLER INST ALLA TION MENU 2. SOURCE NAME – Select the name for the source (e.g., DVD, Aux 2, Jazz, etc.). (Name) 3. COMMAND TYPE – Select the type of command template (e.g., CD, TV , etc.). Selecting (CmdTp) the command type template will tell the CAM 6.
53 INST ALLER INST ALLA TION MENU 9. AUTO PLA Y? – “Y es” tells the CAM6.6 to issue a PLA Y command whenever the (AtoPl) source is selected for listening. This option is skipped if the source type (COMMAND TYPE) chosen does not have a PLA Y command associated with it.
INST ALLER INST ALLA TION MENU i. MACRO - Macr o loads a series of commands which are pr ocessed when (Macro) activated. ii. MACRO ID – Enter the macro ID number . Menu advances to SAVE CHANGES (MacID) (step 9) e. All Other Selections: Procedur e advances to DEVICE CODE (step 7) 7.
55 INST ALLER INST ALLA TION MENU 1. SOURCE NUM – Select the source number this function will be configur ed for . (Src #) 2. USE NUM IR? – T ells the system whether the source component has numeric (NumIR) scrolling, such as 100-disc CD player . A selection of “no” disables Numeric IR and advances to SAVE CHANGES 3.
INST ALLER INST ALLA TION MENU 9. SUFFIX CMD – T ells the system whether a command will be issued after the (Sufix) selection of the numerical value (e.g., 1, 2 Enter ). If “no,” proce- dure advances to SA VE CHANGES (step 13) 10. COMMAND TYPE – Select the type of source command (e.
57 INST ALLER INST ALLA TION MENU 2. COMMAND TYPE – Select the type of source command (e.g., CD, TV , etc.). (CmdTp) a. Selected: Learned IR Choose Learned IR if the pre-pr ogrammed IR code library does (LrnIR) not support the source component. i. LEARNED SRC – Select the learned source bank to be assigned to the sour ce (LnSrc) component.
58 INST ALLER INST ALLA TION MENU ZONE SETUP (ZonSu) NOTE: This procedur e should be performed using the keypad installed in the zone to be configured. See Zone Setup - Flow Chart on page 71 Zone Setup allows the installer to adjust properties of the UNO Keypad contr olled CAM6.
59 INST ALLER INST ALLA TION MENU 2. F ACTORY INIT WARNING: This pr ocedure r eturns the controller to its (FInit) original settings - use with discretion. Factory Initialization allows the installer to erase all programmed settings and returns the settings to the factory default settings.
c. Selected: Default Default selects the same device type and device code previously (Deflt) setup in BASIC SETUP . Procedur e advances to KEY FUNCTION (step 5) d. Selected: Macr o: (T o build macros, see Macr o Editor page 62) (Macro) i. MACRO - Macr o loads a series of commands which are pr ocessed when (Macro) activated.
61 e. All Other Selections: Procedur e advances to DEVICE CODE (step 8) 8. DEVICE CODE – Source component code for IR contr ol. (DevCd) 9. KEY FUNCTION (f) – Select Keypad function. (KeyFn) 10. SAVE CHANGES? (f) – Select “yes” to save the changes.
62 MACRO EDITOR (MacEd) This procedur e is used to cr eate a sequence of commands that are launched with one key touch or other event. Up to 132 macros can be cr eated for the system, and each macr o can contain up to 10 commands including other macros and delays.
63 5. DEVICE CODE – Source component code for IR contr ol. (DevCd) 6. KEY FUNCTION – Select a function (Play , etc.). (KeyFn) SYSTEM INFO (SInfo) System Info allows the installer to view the controller’ s manufacturing build properties.
64 INST ALLER SETUP MENU FLOW CHARTS.
INST ALLER SETUP MENU FLOW CHARTS 65.
INST ALLER SETUP MENU FLOW CHARTS 66.
INST ALLER SETUP MENU FLOW CHARTS 67.
INST ALLER SETUP MENU FLOW CHARTS 68.
INST ALLER SETUP MENU FLOW CHARTS 69.
INST ALLER SETUP MENU FLOW CHARTS 70.
INST ALLER SETUP MENU FLOW CHARTS 71.
INST ALLER SETUP MENU FLOW CHARTS 72.
INST ALLER SETUP MENU FLOW CHARTS 73.
74 INST ALLER SETUP MENU FLOW CHARTS.
75 INST ALLER SETUP MENU FLOW CHARTS.
76 INST ALLER SETUP MENU FLOW CHARTS.
77 INST ALLER KEYP AD DIAGNOSTIC MENU UNO Keypad Diagnostics Menu The Diagnostics Menu allows the installer to run a diagnostic check on the keypad and to verify the firmware version. The Diagnostics Menu also contains the update firmware pr ocedur e for updating the UNO-S1 and UNO-S2’ s firmware.
78 INST ALLER IR DEVICE CODES Device Codes for TVs: Admiral 0093, 0463 Advent 0761, 0842 Aiko 0092 Akai 0030, 0672, 0702, 0812 Albatron 0700, 0843 America Action 0180 Anam 0180 AOC 0030 Apex Digital 0.
79 Device Codes for Cable: (cont’d) Starcom 0003 Supercable 0276 Supermax 0883 T orx 0003 T oshiba 0000 T ristar 0883 V2 0883 Viewmaster 0883 Vision 0883 Vortex View 0883 Zenith 0000, 0525, 0899 Dev.
80 INST ALLER IR DEVICE CODES Device Codes for VCRs: (cont’d) Pulsar 0039 Quasar 0035, 0162 Radio Shack 0000 Radix 0037 Randex 0037 RCA 0060, 0240, 0042, 0149, 0880 Realistic 0035, 0037, 0048, 0047,.
81 Device Codes for Amp and Misc. Audio: Aiwa 0159 Altec Lansing 1485 Cambridge Sound. 1530 Creative 0872 Durabrand 1561 GE 0078 Harman/Kardon 0892 JVC 0331 Left Coast 0892 Lenoxx 1561 Marantz 0892, 1.
82 INST ALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olU.
83 KEY FUNCTION UNO-S1 TV (HDTV) Off Off Off , P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learne.
84 INST ALLER KEY CODES CABLE KEY FUNCTION UNO-S1 CABLE 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olum.
85 KEY FUNCTION UNO-S1 CABLE PIP Chan Up PIPCU Learned Only PIP Chan Dn PIPCD Learned Only Input 1 In 1 A,VID1,Video,TVp1 Input 2 In 2 B,VID2,TVp2 Input 3 In 3 C,VID3,TVp3 Input 4 In 4 VID4,TVp4 Input.
86 INST ALLER KEY CODES VIDEO ACC KEY FUNCTION UNO-S1 VIDEO A CC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V ol.
87 KEY FUNCTION UNO-S1 VIDEO ACC Off Off Off , P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Lear n.
88 INST ALLER KEY CODES SA T/DSS KEY FUNCTION UNO-S1 SA T/DSS 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp .
89 KEY FUNCTION UNO-S1 SA T/DSS PIP Chan Up PIPCU Learned Only PIP Chan Dn PIPCD Learned Only Input 1 In 1 VID1,Video ,TVp1 Input 2 In 2 VID2,TVp2 Input 3 In 3 VID3,TVp3 Input 4 In 4 VID4,TVp4 Input 5.
90 INST ALLER KEY CODES VCR KEY FUNCTION UNO-S1 VCR 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp V olume Up.
91 KEY FUNCTION UNO-S1 VCR Off Off Off , P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learned Only.
92 INST ALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 5Digit 5 6 6 6Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V.
93 KEY FUNCTION UNO-S1 LASER DISC Off Off Off, P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Lear n.
94 INST ALLER KEY CODES DVD KEY FUNCTION UNO-S1 DV D 1 1 Digit 1, T raack 1 2 2 Digit 2, T rack 2 3 3 Digit 3, T rack 3 4 4 Digit 4, T rack 4 5 5 Digit 5, T rack 5 6 6 Digit 6, T rack 6 7 7 Digit 7, T.
95 KEY FUNCTION UNO-S1 D VD Off Off Off, P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learned Only.
96 INST ALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume Up V olUp .
97 KEY FUNCTION UNO-S1 RECEIVER Off Off Off , P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Learned.
98 INST ALLER KEY CODES AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC A UDIO 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olu.
99 KEY FUNCTION UNO-S1 AMP/MISC A UDIO Off Off Off, P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght L.
100 INST ALLER KEY CODES CD KEY FUNCTION UNO-S1 CD 11 Digit 1, T rack 1,Dsc1 22 Digit 2, T rack 2,Dsc2 33 Digit 3, T rack 3,Dsc3 44 Digit 4, T rack 4,Dsc4 55 Digit 5, T rack 5,Dsc5 66 Digit 6, T rack .
101 KEY FUNCTION UNO-S1 CD Off Off Off, P ower On/Off 11 11 Learned Only 12 12 Learned Only 13 13 Learned Only 14 14 Learned Only 15 15 Learned Only 16 16 Learned Only Bright Brght Lear ned Only Dim D.
102 INST ALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL 1 1 Digit 1 2 2 Digit 2 3 3 Digit 3 4 4 Digit 4 5 5 Digit 5 6 6 Digit 6 7 7 Digit 7 8 8 Digit 8 9 9 Digit 9 0 0 Digit 0 V olume U.
103 KEY FUNCTION UNO-S1 HOME CONTROL Off Off Off, P ower On/Off 11 11 Lear ned Only 12 12 Lear ned Only 13 13 Lear ned Only 14 14 Lear ned Only 15 15 Lear ned Only 16 16 Lear ned Only Bright Brght Lea.
104 INST ALLER SOURCE NAMES UNO-S1 UNO-S2 Au x AU X A ux 1 A UX 1 A ux 2 A UX 2 Blues Blues Cable Cab le Cbl 1 Cable 1 Cbl 2 Cable 2 Cbl 3 Cable 3 CDCh CD Changer CDCh1 CD Changer 1 CDCh2 CD Changer 2.
105 UNO-S1 UNO-S2 RepTV Repla yTV Rock Roc k Sat Satellite Sat 1 Satellite 1 Sat 2 Satellite 2 Sat 3 Satellite 3 SatRd Sat Radio Src 1 Source 1 Src 2 Source 2 Src 3 Source 3 Src 4 Source 4 Src 5 Sourc.
INST ALLER SETUP FORMS T uner Russound N/A Peripher al N/A N N/A N N/A N/A 106.
Mute INST ALLER SETUP FORMS 107.
INST ALLER SETUP FORMS 108.
CAM6.6 CAM6.6 Back Panel (C ontroller ID 2) CAM6.6 Back Panel (C ontroller ID 1) CAM6.6 102.5 102.5 102.5 RCA Cables 102.5 102.5 102.5 UNO-S1 UNO-S1 Sharing a single CAM6.6T (internal tuner) with multiple controllers This arrangement can support up to six CAM6.
CAM6.6 CAM6.6 Back Panel (Controller ID 2) CAM6.6 Back Panel (Controller ID 1) CAM6.6 RS-232 INTERFACE IR LR A UDIO O UTPUT 12VDC 1.5A I N O UT NEWMARKET, NH U.S.A. ST2 Smart Tuner LINK K EYPAD P ORTS T UNER 1 T UNER 2 FM C OAX L OOP A NTENNA FM C OAX L OOP A NTENNA Serial# MADE IN KOREA IR LR A UDIO O UTPUT ST2 Dual Tuner Back P anel 102.
SAMPLE CONFIGURA TIONS MUL TIPLE CONTROLLERS WITH THREE TUNERS Sharing an ST2 Dual T uner with multiple CAM6.6 con- trollers (with and without tuners) The configuration below is suitable for 7 to 12 zones that can access the ST2 Dual T uner and the CAM6.
TECHNICAL SPECIFICA TIONS Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; T1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 1dB Watts per channel: 20 Watts RMS into 8 Ohms THD+N: <0.
113 WARRANTY & REP AIR The Russound CAM6.6 is fully guaranteed against all defects in materials and workmanship for two (2) years from the date of pur chase. During this period, Russound will r eplace any defective par ts and correct any defect in workmanship without char ge for either parts or labor .
114 NOTES.
115 NOTES.
CAM6.6 Six-Zone, Six-Source Controller CAM6.6T Six-Zone, Six-Source AM/FM Receiver INSTRUCTION MANUAL Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 e-mail: tech@russound.com www.russound.com Copyright ©2006 Russound ® All rights reserved.
デバイスRussound CAM6.6の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Russound CAM6.6をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはRussound CAM6.6の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Russound CAM6.6の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Russound CAM6.6で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Russound CAM6.6を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はRussound CAM6.6の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Russound CAM6.6に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちRussound CAM6.6デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。