SamsonメーカーEX30の使用説明書/サービス説明書
ページ先へ移動 of 17
® EX10 • EX20 • EX30 O WNERS MANU AL.
Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 2000, Samson Technologies Corp. Printed March 2000 Samson Technologies Corp.
Introduction 3 Welcome to Samson Expedition—the portable audio system for the new millenium! This exceptionally versatile system offers the perfect solution wherever you need portable, high-quality .
Sy stem F eatures The Samson Expedition system uses state-of-the art technology to bring a revolutionary new degree of flexibility and portability to professional audio. Its main features include: • A built-in telescoping handle and locking wheels that make it easier than ever before to transport your audio system.
Sy stem F eatures • The EX30 includes all the features of the EX20, and adds a flexible four-channel stereo mixer that provides two monophonic and one stereo mic/line channels with dual XLR and 1/4" connectors. In addition, separate dual phono connectors allow you to hook up an external cassette or CD player.
Expedition EX10 Guided T our 1: 1/4" input - Use this standard 1/4" connector to connect signal from a power amplifier (rated at up to 250 watts into 8 ohms) to the EX10. 2: Speakon™ input - Alternatively, you can use this Speakon ™ connector to connect signal from a power amplifier (rated at up to 250 watts into 8 ohms) to the EX10.
Expedition EX10 7 SAMSON MPL2242 MMPL2242 MPL2242 S E R V O - 2 4 0 SAMSON SAMSON MPL2242 MMPL2242 MPL2242 S E R V O - 2 4 0 SAMSON Using two EX10s in mono: A single mono signal (bus or aux send) is routed from a mixer to a power amplifier.
8 Expedition EX20 Guided T our 1: Input connector - Use this balanced female XLR connector to route line-level signal into the EX20. 2: Output VU meter - This three-segment bar meter shows the EX20 output level.
Expedition EX20 9 ! 0 10 5 ! 0 10 5 SAMSON MPL2242 MMPL2242 MPL2242 ! 0 10 5 ! 0 10 5 SAMSON MPL2242 MMPL2242 MPL2242 Using two EX20s in mono: A single mono signal (bus or aux send) is routed from a mixer to one EX20 ’ s XLR input, and a connection is made between that EX20 ’ s XLR output to a second EX10 ’ s XLR input.
10 Expedition EX30 Guided T our 1: Equalizer - These controls allow you to shape your sound by boosting or cutting the amount of bass (at 100 Hz) or treble (at 10 kHz) by up to 15 dB. A center detent in each knob indicates no boost or cut (that is, flat response).
11 Expedition EX30 5: Insert (sub) connector - This 1/4" connector brings line-level signal in directly before the EX30 power amplifiers. It is normally used to return signal from an optional EX500 subwoofer. 6: Line inputs - Use these 1/4" jacks to connect line-level sources to the EX30.
12 Expedition EX30 15: CD inputs - Connect the outputs of a CD or tape player to this set of dual phono jacks. Signal arriving here returns to stereo channel 3/4.
Expedition EX30 13 Using one EX30 and an EX20 (stereo operation): In this example, microphones are connected to the XLR mic inputs of channels 1 and 2 of an EX30, and a stereo keyboard is connected to.
14 P ositioning and Mounting Instr uctions General P ositioning T ips • Operating a microphone or turntable in front of a speaker is a sure formula for feedback and/or rumble problems, so always place the Expedition in front of any mics or turntables that are being used.
15 P ositioning and Mounting Instr uctions Before fly-mounting, wall-mounting or ceiling-mounting the Expedition, you must first install a Samson MP 1030 mounting bracket to the fly points, as shown i.
16 As shown in the illustration on the left, the top panel of the Expedition EX20 and EX30 provides a prewired compartment that accommodates any of three different Samson wireless receivers: the UM1 or M32 UHF models or the VM1 VHF model. Output signal from a wireless receiver mounted in an EX30 arrives at channel 2 of the onboard mixer.
17 Specifications Power Rating: (@ 8 Ω ) : EX10 250 Watts Program; 400 Watts Max. Peak EX20, EX30 160 Watts LF; 40 Watts HF Frequency Response : (all models) 60 Hz – 15 kHz ± 3 dB Sensitivity: EX10 97 dB SPL @ 1W/1m Crossover Frequency: EX10 2.3 kHz (12 dB Per Octave) EX20, EX30 2.
デバイスSamson EX30の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samson EX30をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamson EX30の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samson EX30の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samson EX30で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samson EX30を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamson EX30の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samson EX30に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamson EX30デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。