SamsungメーカーBN68-00990V-03の使用説明書/サービス説明書
ページ先へ移動 of 56
PDP-TELEVISION (P LASMA D ISPLA Y P ANEL ) Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference.
English - 2 ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”.
English - 3 n t d Contents ◆ G ENERAL I NFORMA TION ■ User Instructions ................................................................................................... 2 ■ Checking Parts ......................................................
English - 4 Contents ◆ W ISELINK ■ Using the WISELINK Function ................................................................................. 28 ■ Using the WISELINK Mode .......................................................................
English - 5 ➢ The product colour and shape may vary depending on the model. Control P anel Front (or Side) Panel Œ SOURCE Displays a menu of all of the available input sources (TV , Ext.1, Ext.2, A V , S-Video, Component, PC, HDMI1, and HDMI2). ´ MENU Press to see the on-screen menu of your TV’s features.
English - 6 ➢ The product colour and shape may vary depending on the model. Connection P anel Side Panel or continued... Œ S-VIDEO or VIDEO / AUDIO L/R - Video (S-Video or V ideo) and audio inputs for external devices, such as a camcorder or VCR.
English - 7 ➢ The product colour and shape may vary depending on the model. Connection P anel ☛ Whenever you connect an audio or video system to your set, ensure that all elements are switched off. ☛ When connecting an external device, match the colour of the connection terminal to the cable.
English - 8 Using the Stand-Base ➢ T wo or more people should carry the PDP . Never lay the PDP on the floor because of possible damage to the screen. Always keep the PDP upright. ➢ The PDP can rotate 20 degrees in right and left directions. ➢ The performance of the remote control may be affected by bright light.
English - 9 Installing Bat teries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. 2 Install two AAA size batteries. ➢ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
English - 10 View i ng the Menus 1 Press the MENU () b u tton. The main menu is displayed on the screen. Its left side has five icons: Input , Picture , Sound , Channel , and Setup . 2 Press the … or † button to select one of the icons. Press the ENTER () button to access the icon’s sub-menu.
English - 11 . Plug & Play F eature 1 If the television is in standby mode, press the POWER () button on the remote control. The message to start Plug & Play is displayed. 2 The Language menu will automatically appear after several seconds. 3 Select the appropriate language by pressing the … or † button.
English - 12 1 Press the MENU () button to display the menu. 2 Press the ENTER () button to select Source List . 3 Press the ENTER () button again. 4 Press the … or † button to select the signal source, then press the ENTER () button. A vailable signal sources : TV , Ext.
English - 13 e ) Storing Channels A utomatically Y ou can scan for the frequency ranges available to you (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
English - 14 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Channel , then press the ENTER () button. 3 Press the … or † button to select Manual Store , then press the ENTER () button. 4 Select the required option by pressing the … or † button, then press the ENTER () button.
English - 15 Using the Channel Manager , you can conveniently lock or add channels. 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Channel , then press the ENTER () button. 3 Press the … or † button to select Channel Manager , then press the ENTER () button.
English - 16 This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Channel , then press the ENTER () button.
English - 17 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Channel , then press the ENTER () button. 3 Press the … or † button to select Fine Tune , then press the ENTER () button.
English - 18 Y ou can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Picture , then press the ENTER () button. 3 Press the ENTER () button twice.
English - 19 al S electing the Picture Size Y ou can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Picture , then press the ENTER () button.
English - 20 Y ou can display a sub picture within the main picture. In this way you can watch TV program or monitor the video input from any connected devices. ◆ PIP : On/Off Y ou can activate or deactivate the PIP function. ➢ Y ou can select these options simply by pressing the PIP button on the remote control.
English - 21 V . . 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Sound , then press the ENTER () button. 3 Select the required option by pressing the … or † button, then press the ENTER () button.
English - 22 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Setup , then press the ENTER () button. 3 Press the … or † button to select Time , then press the ENTER () button. 4 Select the required option by pressing the … or † button, then press the ENTER () button.
English - 23 on. n. ons n. n. y 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Setup , then press the ENTER () button. 3 Select the required option by pressing the … or † button, then press the ENTER () button.
English - 24 To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology . This technology enables you to set picture movement up/down (V ertical Line) and side to side (Horizontal Dot). The T ime setting allows you to program the time between movement of the picture in minutes.
English - 25 s on. s The Windows display-settings for a typical computer are shown below . But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases.
English - 26 Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Input Mode (PC) IBM PC / A T Compatible Vi deo Signal V ertical frequency (Hz) 70.
English - 27 1 Press the MENU () button to display the menu. 2 Press the … or † button to select Setup , then press the ENTER () button. 3 Press the … or † button to select PC , then press the ENTER () button. 4 Select the required option by pressing the … or † button, then press the ENTER () button.
English - 28 ◆ Do not apply excessive force when you insert/eject the memory card or USB device. ◆ Do not place the memory card or USB device near a strong electro-magnetic device. ◆ Do not allow metal substances to come in contact with the terminals on the memory card.
English - 29 1 Press the MENU () button to display the menu. Press the ENTER () button to select Input . Press the … or † button to select WISELINK , then press the ENTER () button. 2 Press the … or † button to select a corresponding memory device, then press the ENTER () button.
English - 30 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER () button. JPEG files and existing folders are displayed. 3 Press the … / † / œ / √ buttons to select a file, then press the ENTER () button.
English - 31 n o . e o e K Using the Photo (JPEG) List continued... ◆ Slide Show: Starts a slide show . (Refer to “Viewing a Slide Show” on page 32) ◆ Rotate: Y ou can rotate images in full screen mode. Images are rotated in the order of 90°, 180°, 270° and 0° (original state).
English - 32 Using the Photo (JPEG) List continued... 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER () button. JPEG files and existing folders are displayed.
English - 33 3 o Using the Menu during a Slide Show ◆ Speed: Select to control the slide show speed. Each time the ENTER () button is pressed, the speed changes repeatedly . ( Normal Slow Fast ) ◆ Background Music: Select to choose whether you want to play MP3 file during a slide show .
English - 34 Using the Photo (JPEG) List Rotating 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER () button. JPEG files and existing folders are displayed.
English - 35 y. . n) . Using the Photo (JPEG) List Zoom function information icon (Displayed at the top left of the screen) . Zoom (x 1) Restore a photo to its original size. Zoom-in to a photo x2. Current OSD Icon Zoom (x 2) Zoom-in to a photo x3. Zoom (x 3) Zoom-in to a photo x4.
English - 36 Y ou can copy files between different memory devices installed. 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER () button.
English - 37 n e e 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Photo , then press the ENTER () button. The corresponding files and existing folders are displayed.
English - 38 P rinting the Photo Image By connecting the TV to printers with PictBridge support (sold separately), you can send photo images from the memory device directly to the printer with a few simple operations.
English - 39 n 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Music , then press the ENTER () button. MP3 files and existing folders are displayed. 3 Press the … or † buttons to select a file to be played, then press the ENTER () button.
RESOURCE Folder 1 001 Swan Song feat.TBNY 002 Beatles-Yesterday 003 Fall in Love 004 Tom Waits-Time 005 Chuk Mangione-Feel So good 007 Ryuichi Sakamoto-Rain 008 Bon jovi-This ain’t a love song 006 N.
English - 41 s , n e e 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Music , then press the ENTER () button. The corresponding files and existing folders are displayed.
English - 42 Setup displays the user settings of the WISELINK menu 1 After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29) 2 Press the œ or √ button to select Setup , then press the ENTER () button.
English - 43 ◆ Music Repeat: On : Plays back a music file or all music files repeatedly . Off : Doesn’t play back repeatedly . ◆ Background Music: Select to determine whether to play an MP3 file during a slide show . Y ou can select Music On or Music Off .
English - 44 Most television stations provide written information services via teletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.
English - 45 The teletext pages are organized according to six categories: Part Contents A Selected page number . B Broadcasting channel identity . C Current page number or search indications. DD ate and time. ET ext. F Status information. F ASTEXT information.
English - 46 How to Install the Wall Mount Brac k et ➢ This installation guide may be different from the PDP User’s manual. Please refer to the proper installation guide for your product. Installation Notes ◆ Contact a technician for installing the wall bracket.
English - 47 s o How to Install the Wall Mount Brac k et 3 T ighten the screws of the plastic hanger (shown in picture 2) to the back side of the PDP .
English - 48 Set ting Up Y our Remote Control Setting Up the Remote to Operate Y our VCR 1 T urn off your VCR. 2 Press the VCR button on your TV’s remote control.
English - 49 e f r x. Set ting Up Y our Remote Control Setting Up the Remote to Operate Y our DVD 1 T urn off your DVD. 2 Press the DVD button on your TV’s remote control.
English - 50 Remote Control Codes VCR Brand SAMSUNG ADMIRAL AIW A AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MA THES DAEWOO DB DIMENSIA DYNA TECH ELECTRO.
English - 51 Set ting Up Y our Remote Control continued... CABLE BOX Brand SAMSUNG GI HAMLIN HIT ACHI JERROLD MACOM MAGNA VOX OAK P ANASONIC PHILIPS PIONEER RCA REGAL Code 000 001 002 003 004 005 006 .
English - 52 Set ting Up Y our Remote Control SAMSUNG DVD Product DVD DVDR BD Record VCR COMBO VCR Record DHR COMBO Code 000 001 002 003 004 005 006 007 008 009 010 011 012 013 Product Home Theater VC.
English - 53 Before contacting the Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below , note the model and serial number of the television and contact your local dealer . No sound or picture ◆ Check that the mains lead has been connected to a wall socket.
This page is intentionally left blank. BN68-00990V-03Eng_0824 8/26/06 4:26 PM Page 54.
This page is intentionally left blank. BN68-00990V-03Eng_0824 8/26/06 4:26 PM Page 55.
Correct Disposal of This Pr oduct ( W aste E lectrical & E lectronic E quipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
デバイスSamsung BN68-00990V-03の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung BN68-00990V-03をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung BN68-00990V-03の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung BN68-00990V-03の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung BN68-00990V-03で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung BN68-00990V-03を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung BN68-00990V-03の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung BN68-00990V-03に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung BN68-00990V-03デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
