SamsungメーカーBP59-00134H-01の使用説明書/サービス説明書
ページ先へ移動 of 78
SP-L301 SP-L331 SP-L351 LCD Projector Owner’s Instructions The color and the appearance may differ depending on the product, and the specificatio ns are subjec t to change without prior notice to improve the performance.
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Safety Precautions .
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual Using this Manual • Make yourself fully aware of the safety precautions before using this product.
1-2 Care and Maintenance Cleaning the Surface and the Lens Cleaning Inside the Pr ojector Clean the proj ector using a so ft dry cloth. • Avoid cleaning the product with a flammable substance su ch as benzene or thinner. • Avoid scratching the lense wit h your fingernails or a sharp object.
Major Safety Precautions 1-3 1-3 Safety Precautions Icons used for safety precautions Meaning of Signs Power Related The following images are for your reference and may differ depending on models and coun tries.
1-3 Major Safety Precautions Caution Installation Related Warning When unplugging the powe r plug from the wall outlet, make su re to hold the power plug by the plug and not by the co rd. • Failing to do so may result in electric shock or fire. Do not turn the prod uct on or off by plug- ging or unpluggi ng the power p lug.
Major Safety Precautions 1-3 Caution Usage Related Take care not to block the vent with a tabl e cloth or curtain. • Otherwise, it may result in fire due to internal overheati ng. Do not let the produ ct drop while moving it. • This may result in a problem with the product or injury.
1-3 Major Safety Precautions Caution If the product generates a strange noise, a burning smell, or smoke, u nplug the power plug immediately and contact a service center.
Major Safety Precautions 1-3 To avoid burning yourself, do not touch the vents or lamp cover while operating or right after turning off the product. Do not clean the p roduct using water spra y or a wet cloth.
2-1 Installation and Connection 2 Installation and Connection 2-1 Package Contents • Unpack the product and check if all of t he contents listed below have been included. • Store the packaging box in case you need to move the product at a later date.
Installation and Connection 2-2 2-2 Installing the Projector Install the projector so that the beam from t he projector i s perpendicular to the screen. • Place the projector so that the lens ai ms at the center of the screen. If the screen is not vertical, the picture on the screen may not appear rectan gular.
2-3 Installation and Connection 2-3 Leveling with Adjustable Feet The projector can be adjuste d to a height of up to 30 mm (about 12 °) from the reference point. Depending on the position of the proj ector, Keystone distortion of the image may appear.
Installation and Connection 2-4 2-4 Zoom and Focus Adjustment The size of your screen determines the distan ce you set your projector from the screen. If you do not install your projector at the projection distance specifie d in the Screen Si ze and Projection Distance ta ble, you will not be able to adjust the focu s correctly.
2-5 Installation and Connection 2-5 Screen Size and Projection Distan ce A. Screen / Z. Throw Distance / Y’. Distance from Lens Center to Image Bottom Install the projector on a flat, even surfac e and level the projector using the adjust able feet to obtain op timal picture quali ty.
Installation and Connection 2-5 This projector is designed to show images optima lly on a 80 ~ 120 inches sized screen. 270 685.8 216 548.6 162 411.5 372. 3 945.7 310.2 788 .0 27.0 68.6 280 711.2 224 569.0 168 426.7 386. 2 980.9 321.8 817 .3 28.0 71.1 290 736.
2-6 Installation and Connection 2-6 Adjusting the H-Keystone and V-Keystone If you install the p rojector below the cente r line of the screen (near the ceiling or on the floor, for example), the angle at which the projector is set to the screen causes t he image it projects to be distorted.
Installation and Connection 2-6 12. Adjust the projector's angle so that a cor ner of the p rojected picture (which is n earest to the projector) meets that of the screen. In the illustration below, this co rner is label ed D. A : Projector / B : Screen / C : Projected image / D : A corner of the picture nearest to the projector 13.
2-6 Installation and Connection 14. Press the V.KEY-STONE butt on on the remote control . The <V-Keystone> menu appears. Ad just <V-Keyston e> using the + or - button on the remote control.
Installation and Connection 2-6 A : Projector / B : Screen / C : Projected image Keep adjusting unti l the horizon tal line on the < Test Pattern > becomes paral lel with the oute r horizontal edge of the screen. 16. Adjust the screen size using the zoom knob.
2-7 Installation and Connection 2-7 Lamp Replacement Cautions on Lamp Replacement • The projector lamp is an expendable item. For best operating performance, replace the lamp accordin g to the usage time. You can view the lamp usage time in the Informatio n Display (INFO button).
Installation and Connection 2-7 3. Hold and pull the lamp handle ou t of the projector, as shown in the figure below. Assemble a new lamp in the reverse order of disassembly. Replacing and Cleaning the Filter Precautions when replacing the proje ctor filter: • The filter is located at the bottom of the projector.
2-7 Installation and Connection running water. • After washing the filte r under running water, ma ke sure to dr y it completely. The moisture ma y cause the filter to corrode. • If dust cannot be separated from the filter or the filter is torn , it must be replaced.
Installation and Connection 2-8 2-8 Rear Side 1. PC IN por t 8. AUDIO OUT port 2. PC/DVI AUDIO IN port 9. [AV IN] R-AUDIO-L port 3. HDMI/DVI IN po rt 10. [AV IN] VIDEO port 4. LAN port 11. [AV IN] S-VIDEO port 5. Remote Control Signal Receiver 12. Kensington Loc k 6.
2-9 Installation and Connection 2-9 Setting up the PC Environment Check the following items before connecting your PC to your projector. 1. Click the right mouse button on the Windows desktop , and then click [Properties]. The <Display Pro perties> dialog appears.
Installation and Connection 2-9 5. Click the [OK] button to close the window, and then click the [OK] button on the < Displ ay Properties> window to close that window. The computer may restart automatically. 6. Shut down the PC and connect it to the projector.
2-10 Installation and Connection 2-10 Supported Display Modes PC Timing (D-Sub/HDMI) FORMAT RESOLUTION HORIZONTAL FREQUENCY (KHZ) VERTICAL FREQUENCY (HZ) PIXEL FREQUENCY (MHZ) IBM 640 x 350 70Hz 31.469 70.086 25.175 IBM 640 x 480 60Hz 31.469 59.940 25.
Installation and Connection 2-10 For the resolutions presented above, if a signal with a resolution lower or highe r than 1024x768 is input, it is converted to 1024x768 by the Sca ler chip inside the projector. When the real resolution (1024 x768) of the pro jector and the PC outpu t resolution are the same, the screen quality is optimal.
2-10 Installation and Connection AV Timing (VIDEO/S-VIDEO) NTSC, NTSC 4.43, PAL, PAL60, PAL-N, PAL-M, SECAM EIA-861 Format5 1920 x 1080 Interlace d 59.939 33.7 16 74.175 EIA-861 Format5 1920 x 1080 Interlace d 60.000 33.7 50 74.250 EIA-861 Format17,18 720 x 576 Progressive 50.
Installation and Connection 2-11 2-11 Connecting the Power 1. Plug the power cord i nto the power terminal on the rear si de of the projector..
2-12 Installation and Connection 2-12 Connecting with a PC 1. Connect the [PC IN] port on the rea r side of the projector to the monitor output port of the PC using a PC video cabl e.
Installation and Connection 2-13 2-13 Connecting a PC using an HDMI/DVI cable Make sure that your PC and projector are turned off. 1. Connect the [HDMI/DVI IN] terminal of the projector to the HDMI or DVI terminal of your PC using a HDMI/HDMI or HDMI/DVI cable (Not supplied) .
2-14 Installation and Connection 2-14 Connecting an External Monitor You can view an image on both your projector and a sepa rate monitor at the same time. Make sure that your PC and projector are turned off. 1. Connect the [PC IN] terminal at the ba ck of the proje ctor to the D-Sub termin al of your PC using a D-Sub cable.
Installation and Connection 2-15 2-15 Connecting an HDMI-Compatible Device Make sure that the AV device and your projector are tu rned off. 1. Connect the [HDMI/DVI IN] terminal at the back of the proj ector to the HD MI or HDMI/DVI output terminal of the digital output device using an HDMI/DVI or HDMI/HDMI cable.
2-16 Installation and Connection 2-16 Connecting an AV device using a D-Sub cable Make sure that the AV device and your projector are tu rned off. 1. Connect the [PC IN] terminal at the ba ck of the projec tor to the D-Sub te rminal of your AV device using a D-Sub cable.
Installation and Connection 2-17 2-17 Connecting an AV device with component output Make sure that the AV device and your projector are tu rned off. 1. Connect the [PC IN] terminal on the back of the projector to the Component terminal on your AV device using a D-Sub to Component cable (Not supp lied).
2-18 Installation and Connection 2-18 Connecting using a Video/S-Video cable Make sure that the AV device and your projector are tu rned off. 1. Connect the [VIDEO] or [S-VIDEO] terminal and the AV de vice using a Video cable (Not supplie d) or S-Video cable (Not supplied).
Installation and Connection 2-19 2-19 Connecting an External Speaker You can hear sound th rough an external speaker instead of the internal speakers embedded in the p rojector. 1. Obtain an audio cable (Not sup plied) suitable for your external speaker.
2-20 Installation and Connection 2-20 Connecting to a Network This product can use n etwork function. Refe r to the following Ne twork connection method.
Installation and Connection 2-20 2-20-2. Connecting to a Static IP Network You can attach the proje ctor to a network t hat uses a Static IP address, which corresp o nds to using a dedicate d lease line.
2-21 Installation and Connection 2-21 Kensington Lock A Kensington Lock (not supplied) is an anti -theft device that lets u sers lock the produc t so that they can safely use it in pub lic locations.
Using 3-1 3U s i n g 3-1 Product Features 1. An optical engine adopting new LCD technolo gy • 1024 x 768 panel has been adapte d . • Utilizes a 3P-LCD pane l. • SP-L301 : Provides a bright screen of 3000 lumen. SP-L331 : Provides a bright screen of 3300 lumen.
3-2 Using 3-2 Front, Upper NAME DESCRIPTION 1.Indicators - STAND BY (Blue LED) - LAMP (Blue LED) - TEMP (Red LED) Refer to the LED Indications. 2. Move / Select / Volume button / : Use to move to or select an item within a menu. : Use to adju st the volume.
Using 3-3 3-3 Remote Control 1. POWER ( ) Button Use this button for turning the product on and off. 2. AUTO Button Adjusts the Picture automatica lly. (Available in < PC> Mode Only) 3. MENU ( ) Button Used to display the Menu Screen. 4. Move ( )/ ( ) Buttons Used to display the Menu Screen.
3-4 Using 3-4 LED Indications LED Indications :Light is On :Light is Blinking :Light is Off STAND BY LAMP TEMP STATUS If you press the [POWER] button on the re mote control or projecto r, the screen appears within 30 seconds. The projector is operating normally.
Using 3-4 Clearing Indicator Problems This Projector uses a cooling fan system to keep the unit from over heating. Operatio n of the cooling fan may cause noise, This does not affect product performance and is part of normal operation. CLASSIFICA TION STATE MEASURES Action 1 The cooling fan system is not operating normally.
3-5 Using 3-5 Using the Screen Adjustment Menu (OSD: On Screen Display) The Screen Adjustment Menu (OSD : On Screen Display) Structure To access the Menu, press the Menu button on the produ ct or on the remote. To move in the menu, press the arrow buttons.
Using 3-5 MENU DESCRIPTION Mode Select a screen state which is customi zed to yo ur projector or change the screen mo de as required. • <Mode> • <Standard> : T his picture mode is the most ge neral mode and works well in most situations.
3-5 Using Digital NR When a dotted line is displayed or the screen sh akes, you can view a better visual quality picture by enabling Noise Reduction. When the input signal is PC Timin g (D-S ub/HDMI), <Digital NR> does not operate. Black Level You can sel ect the signal black level according to the input signal.
Using 3-5 3-5-3. Setup MENU DESCRIPTION Install To tailor the p icture to the instal lation location , you can invert the projecte d images vertically / hori- zontally.
3-5 Using Video Type If the screen quality is abnormal as a result of the projector not identifying the input sign al type auto- matically in <PC> or <HDMI> mode, you can manuall y set the input signal. In <PC> mode, < Video Type> is o nly enabled if t he input signal is AV Timing (D-Sub).
Using 3-5 3-5-4. Option Network By connecting a LAN cable between the PC a nd projecto r, you can use the following supplementary functions. On your PC, you can check the projector's co nditions (lifespan of the lamp, operation error, temperature) and remote ly contro l the projector's power On/Off, brightness, and sound On/Off .
3-5 Using Filter Check Time Sets the check period for the filter. (Unit: hour) • <Off>-<100>-< 200>-<400>-<800> If the filter usage time is larger than the f ilter check period, the f ilter check message is displayed for a minute whenever the projector is turned on.
Using 3-6 3-6 Network Management 3-6-1. Management using the Web Browser The Web Browser let s you monitor and control one projecto r from a PC without installin g any software. Before you can use the W eb Browser , you must connect yo ur projector to your local area n etwork.
3-6 Using 3-6-2. Projector Manage ment using PC Software You can mo nitor and control mo re than one projector using Samsung Proj ector Manager. • To use Samsung Projector Manager, your PC must meet.
Using 3-6 select Add Projec tor. • Specify the Projector Name, IP Address and Group Name to reg ister and then p ress ADD. Any group whose name is not specifie d will automatically be named 'Default Group.' To remove and / or rename a registered projector, right-click and then select Delete and / or R ename respectively.
3-6 Using • Projector Management • You can check a projector's lamp condition, temperatu re, operation, errors , etc in real time. : You can view a projector's Name, IP Address, Gr oup, Power On/Off status, LAMP lifespan, operation errors (represented by icons), etc in real time.
Using 3-6 Temperature level status i cons Error T he cooling fan 1 is not operating normal ly. Refer to Action 1 in Clearing Indicatior Problem. Error T he cooling fan 2 is not operating normal ly. Error T he cooling fan 3 is not operating normal ly. Error T he cooling fan 4 is not operating normal ly.
3-6 Using • Managing the P rojectors : Using the icons in the Projector List (only applicab le to 'V'-marked projectors in the monitori ng window) (Refresh): Updates the status of a projector. (Powe r On): Turns on the po wer of a projecto r.
Using 3-6 • Using the Schedule function Using the Schedul e function, yo u can manage your pr ojectors mor e efficiently. If you select List > Schedule , the following window appear s. The screen has four buttons: • New : Creates a projector to make a Schedule for.
3-6 Using -Waiting: Schedule sti ll awaiting execution. -Running: Repetitive schedu le is running. • To save or load the registered schedule, select File → Export Config/Import Config. • If you want to operate a Schedule loaded by Import Config, load projector's information in advance.
Troubleshooting 4-1 4 Troubleshooting 4-1 Before Requesting Service Please check the following befo re requesting After-Sales servic e. If the problem continues, please contact your nearest Samsung Electronics Service Center. Symptoms Troublesho oting Installa- tion and Connec- tion No Power.
4-1 Troubleshooting Screen and External Source Cannot see picture images. Be su re that the power cord o f the projector i s connected. Be sure that the proper input source is sele cted. Check that the connectors are p roperly connected to th e ports at the back of the projector.
Troubleshooting 4-1 Network The Web browser will not st art up. Check the system requirements for the PC to con nect to the Web browser . The Web browser will not connect to the projector. 1. Check whether the power cable is con nected to the proje ctor (See Section 2 -11, Connecting the Power ) 2.
5-1 More Information 5 More Information 5-1 Specifications This Class B equipment is designed for home and office use. The equipment has been registered reg arding EMI for residential use. It may be used in all areas. Class A is fo r office use. Class A is for bu siness while class B emits less electromagnetic waves than class A.
More Information 5-1 The LCD panel us ed in the LCD projector consists of hundreds of thousand s of fine pixels. Like other video display devices, the LCD panel may contain bad pixels which do not operate.
5-2 More Information 5-2 RS-232C Command Table Communication Format (Complie s with the RS232C Standard) • Baud rate : 9,600 bps • parity : None • Data bits : 8, stop bit : 1 • Flow Control : None Serial Communication Protocol 1. Command Packet Structure [7bytes] • A command packet consists of 7 bytes in total.
More Information 5-2 Command Table CONTROL ITEM CMD1 CMD2 CMD3 VALUE General Power Power Display OSD / Power On 0x00 0x00 0x00 0 OK 1 Cancel 2 Direct Power Off 3 Volume Direct 0x01 0x00 0x00 (0~100) C.
5-2 More Information Picture Mode Standard 0x0B 0X00 0x00 0 Presentation 1 Text 2 Movie 3 Game 4 User 5 Contrast 0~100 0X02 0x00 (0~100) Brightness 0~100 0X03 0x00 (0~100) Sharpness 0~100 0X04 0x00 (0.
More Information 5-2 Picture Gamma -3~3 0x0B 0x0C 0x00 (0~6) Save Display OSD 0x0D 0x00 0 OK 1 Cancel 2 Direct Save 3 Reset 0x0E 0x00 0 Size Normal 0x0F 0x00 0 Zoom1 1 Zoom2 2 16:9 3 Custom 4 Custom T.
5-2 More Information Picture Zoom x1 0x0B 0x18 0x00 0 x2 1 x4 2 x8 3 LEFT 0x19 0x00 0 RIGHT 1 Up 2 Down 3 Horizontal Position Continuous LEFT 0x0B 0x1A 0 x00 0 RIGHT 1 Vertical Posi- tion Continuous D.
More Information 5-2 Setup install F-F 0x0C 0x00 0x00 0 F-C 1 R-F 2 R-C 3 Lamp Mode ECO 0x01 0x00 0 Normal 1 Bright 2 Keystone V-Keystone -50~50 0x02 0x00 (0~100) H-Keystone -50~50 0x01 (0~100) Auto K.
5-2 More Information Setup Network Network Off 0x0E 0x01 0x00 0 On 1 IP Setting Automatic 0x02 0x00 0 Manual 1 IP Address 0x03 0 x00 0~255 0x01 0~255 0x02 0~255 0x03 0~255 Subnet Mask 0x04 0x00 0~255 .
More Information 5-2 Option Language English 0x0D 0x00 0x00 0 Deutsch 1 Nederlands 2 Español 3 Français 4 Italiano 5 Svenska 6 Português 7 Русский 8 中国语 9 한국어 10 Türkçe 11 ไ.
5-2 More Information Option SOUND Balance Up 0x0D 0x04 0x00 0 Down 1 100Hz Up 0x01 0 Down 1 300Hz Up 0x02 0 Down 1 1KHz Up 0x03 0 Down 1 3KHz Up 0x04 0 Down 1 10KHz Up 0x05 0 Down 1 Filter Check Time .
More Information 5-3 5-3 Contact SAMSUNG WORLDWIDE • If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com/us CANADA 1-800-SAMSUNG(726-7864) http://www.
5-3 More Information GERMANY 01805 - SAMSUNG (7267864,€ 0.14/ Min) http://www.samsung.de HUNGARY 06-80-SAMSUNG(726-7864) http://www.samsung.com/hu ITALIA 800-SAMSUNG(726-7864) http://www.samsung.com/it LUXEMBURG 02 261 03 710 h ttp://www.samsung.com/lu NETHERLANDS 0900 - SAMSUNG (0900-726 7864) (€ 0,10/Min ) http://www.
More Information 5-3 INDONESIA 0800-1 12-8888 ht tp://www.samsung.co m/id JAPAN 0120-327-527 h ttp: //www.samsung.com/jp MALAYSIA 1800-88-9999 http://www.
5-4 More Information 5-4 Correct Disposal - Europe only Correct Disposal of This Product (Waste Electri cal & Electronic Equipm ent) - Europe only Correct disposal of batteries in this product - E.
デバイスSamsung BP59-00134H-01の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung BP59-00134H-01をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung BP59-00134H-01の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung BP59-00134H-01の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung BP59-00134H-01で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung BP59-00134H-01を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung BP59-00134H-01の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung BP59-00134H-01に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung BP59-00134H-01デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
