SamsungメーカーCLP-350Nの使用説明書/サービス説明書
ページ先へ移動 of 97
.
.
© 2007 Samsung Ele ctronics Co., Ltd. All rights reserved. This user ’s guide is provided for informatio n purposes only . Al l information included herein is subject to change without no tic e. Samsung Electronics is not responsible for any changes, direct or indire ct damages, arising from or related to use of this user ’s guide.
C ONT ACT SAMSUNG WORLDWIDE If you have any comments or questions regarding Samsung products, contact the Samsung customer care center . Country Customer Care Center Web S i te ARGENT INE 0800-333-3 733 www .samsung .com/ar AUSTRALIA 1300 362 603 www .
C ONTENT S About this user’s guide ............. ................. ... ..... .............. .............. ................. .............. ......... ................. ................ ...... i Finding more information ...... .............. ........
6. Maintenance Printing a machine configura tion r eport ............ .......................................... ............ ........... .......... ....... ................. ... 6.1 Cleaning your machine .... ................. ................ ......
i About this user’ s guide This user ’s guide provides inform ation about basic understanding of the machine as well as detailed explanation on each step during the actual usage. Both novice users and professional us ers can refer to this guide for installing and using the machine.
ii Safety and Regulatory Information Import ant Precautions and Safety Information When using this machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock, and injury to people: 1 Read and understand all instructions.
iii When using this product, these basic safety precautions should always be followed to reduce risk of fire, elec tric shock, and injury to persons: Ozone Safety During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator .
iv Canadian Radio Interference Regulations This digital app aratus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
v.
1 .1 < Introduction> 1 Introduction Congratulations on the purchase of you r printer . This chapter includes: • Special features • Machine over view • Control p anel overview • Understanding the Control Panel Note Some features are optional.
1 .2 < Introduction> Machine overview These are the main components of your machine. • The figure above shows your machine with the availabl e accessorie s.
1 .3 < Introduction> Control p anel overview 1 toner colors : Show the status of each toner cartridge. See St at us LED w ith the toner cartridge messages on page 1.4. 2 Stat u s : Shows the status of your machine. (Se e "Understand ing the Control Panel" on page 1.
1 .4 < Introduction> Underst anding the Control Panel LEDs The color of the Stat us and toner colors LED ind icates the machine's current status. Note All printing errors will be appear in the Smart Panel program window . Stop button Stat us L ED toner colors LED Description lights green All LEDs off The machine is ready to print.
2 .1 < Software overview> 2 Software overview This chapter gives you an overview of the software that comes with your machine. Further details on how to use the software are explained in the Software section .
2 .2 < Software overview> PostScript driver System requirement s Before you begin, ens ure that your system meet s the following requirements: Windows Y our machine supports the follo wing Windo ws operating systems. Note • Internet Explorer 5.
3 .1 < Getting St arted> 3 Getting Started This chapter gives you step-by-st ep instructions for setting up the machine. This chapter includes: • Setting up the hardware • Setting up the net.
3 .2 < Getting St arted> Supported operating systems The following table shows the network environments supported by the machine: Item Req uirement s Network interface 10/100 Base-TX Network operating system Windows 2000/XP/Vista V arious Linux OS Macintosh 10.
3 .3 < Getting St arted> Inst alling the sof tware Y ou have to install the machine software for printing. The software includes drivers, app lications, an d other user friendly prog rams. Note • The following procedure is fo r when you use the machine as a network machine.
3 .4 < Getting St arted> 6 After the installation is fini shed, a window app ears asking you to print a test page and to register yo urself as a user of Samsung machines in o rder to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Fin ish .
4 .1 < Selecting a nd loadin g print media> 4 Selecting and loading print media This chapter introduces you how select and load print media for your machine.
4 .2 < Selecting a nd loadin g print media> Specifications on print media Ty p e a a. The printer supports a wide range o f media sizes. Size Dimensions Wei gh t Capacity b b. Maximum capacity may differ depending on media we ight, thickness, and env ironmental conditions.
4 .3 < Selecting a nd loadin g print media> Guidelines for special print media Media type Guidelines Envelopes • Successful printing on envelope s depends upon the quality of the envelopes. When selecting envelopes, consider the fol lowing factors: - Weight: The weight of the envelope paper should not exceed 90 g/m 2 or jamming may occur .
4 .4 < Selecting a nd loadin g print media> V erifying the output location The machine has the output tray tha t collects paper face-down, in correct order . Loading p aper In the tray Load the print media you use for the majority of your print jobs in the tray 1.
4 .5 < Selecting a nd loadin g print media> 5 Squee ze the paper length guide and sl ide in it until it lightly touches the end of the paper stack. 6 Close the paper cover . 7 Slide the tray back into th e machine until it clicks. Note After you load paper , you need to set up your machine for the paper type, size, and source you loaded.
4 .6 < Selecting a nd loadin g print media> T o change the tray size to other size, you must adjust the paper length guide properly . 1 Pull the tra y out of the machine. Open the paper cover and remove paper from the tray if necessary . 2 Pres sing and unlatching the guide lock in the top of the tray , pull the tray out manually .
4 .7 < Selecting a nd loadin g print media> 5 Close the paper cover . 6 Slide the tray back into th e machine until it clicks. Using manual feed mode If you select Manual Feeder i n the Source option, you can man ually load paper in the tray .
4 .8 < Selecting a nd loadin g print media> Printing on labels • Only use labels recomme nded for your machine. • V erify that the labe ls’ adhesive material can tolerate a fusing temperature of 180 °C ( 356 °F) for 0.1 seconds. • Make sure that there is no exposed adhesive material between the labels.
4 .9 < Selecting a nd loadin g print media> Printing on preprinted p aper • Preprinted paper is paper that has so me type of printing on it before it is sent through the machine (paper that has a preprinted logo at the top of the page, for example).
4 .10 < Selecting and l oading print me dia> Setting the p aper size and type The settings you change remain in effect only while you are using th e current program. T o make your chang es permanent, make them in the machines folder . Note The following procedure is for Windo ws XP .
5 .1 < Basic printing> 5 Basic printing This chapter explains common printing tasks. • Printing a do cument • Cancel ing a print jo b Printing a document Y our machine allows you to print from various Windows, Macintosh, or Linux applications.
6 .1 < Maintenanc e> 6 Maintenance This chapter provides information for maintaining your machine and the toner cartridge. This chapter includes: • Printing a mac hine configura tion report .
6 .2 < Maintenanc e> 4 Extend the top handle on th e imaging unit and then use it to pull the imaging unit out of the machine completely . Caution • Do not touch the green surface on the imagin g unit with your hands or any other materi al. Use the handle on it in order to avoid touching this area .
6 .3 < Maintenanc e> Caution If there is a cracking sound, re-install the imaging unit. The imaging unit is not properly installed. Maint aining the cartridge T oner cartridge storage T o get th.
6 .4 < Maintenanc e> 4 Grasp the toner cartridge and ali gn it with the corresponding slot inside the machine. Insert it back into its slot unt il it clicks into place, and rotate the toner cartridge clockwise. Note If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water .
6 .5 < Maintenanc e> 6 Remove the cartridge cap . Note If toner gets on your clothing, wipe it off with a dry cloth and wash it in cold water . Hot water sets toner into fabric. 7 Grasp the toner cartridge and ali gn it with the corresponding slot inside the machine.
6 .6 < Maintenanc e> 4 Pull the imagi ng unit out of the machine using th e handle on its bottom. 5 Extend the top handle on th e imaging unit and then use it to pull the imaging unit out of the machine completely . 6 T ake a new imaging unit ou t of its p ackage.
6 .7 < Maintenanc e> Caution If the front cover is not completely closed, the machine will not operate. Please make sure all toner cartri dges are installed properly . If any toner cartridge is installed improperly , the front cover do not close.
6 .8 < Maintenanc e> 7 Close the front cover firmly . Caution If the front cover is not completely closed, the machine will not operate. Please make sure all toner cartri dges are installed properly . If any toner cartridge is installed improperly , the front cover do not close.
7 .1 < Troubleshooti ng> 7 Troubleshooting This chapter gives helpful information on what to do if you encounter a problem. This chapter includes: Machine Setup • Tip s for avoiding p aper jam.
7 .2 < Troubleshooti ng> 3 Carefully remove the paper by pulling in the direction as shown below . Most of the jammed paper can be removed in this step. If you cannot find the jammed paper , or if there is any resistance removing the paper , stop pulling and go to the ne xt step.
7 .3 < Troubleshooti ng> In the optional tray If paper is jammed in the optional T ray , follow th e next steps to release the jammed paper . 1 Pull the option al tray out of the machine. 2 Remove the jammed paper from the machin e. 3 Insert th e optional tray into the machine un til it snaps into place.
7 .4 < Troubleshooti ng> Solving other problems The following chart lists some conditions that ma y occur and the recommended solutions. Follow the sugge sted solutions until the problem is corrected. If the problem persists, please call for service.
7 .5 < Troubleshooti ng> The machine does not print. (continued) The printer driver may be incorrectly installed. Repair the printer software. See Software section . The machine is malfunctioning. Check the display message on the control panel to see if the machine is indicating a system error .
7 .6 < Troubleshooti ng> Printing quality problems If the inside of the machine is dirty or paper has been loaded i mproperly , you may notice a reduction in print quality . See the table below to clear the problem. Yo u r machine has an odd smell during initial use.
7 .7 < Troubleshooti ng> Color or Black background If the amount of backg round shading becomes unacceptable: • Change to a l ighter weight paper .
7 .8 < Troubleshooti ng> Wrinkles or creases • Ensure that the paper is loaded properly . • Check the paper type and quality . (See "S pecifications on print media" on page 4.2.) • T urn the stack of paper over in the tray . Also try rotating the paper 180° in the tray .
7 .9 < Troubleshooti ng> Note Refer to Microsoft Windows 2000/XP/200 3/Vist a User ’s Guide that came with your PC for further info rmation on Windows error messages. Common PostScript problems The following situations are PS la nguage specific and may occur wh en several printer languages are being used.
7 .10 < Troubleshooti ng> Some color images come out all black. This is a known bug in Ghostscript (until GNU Ghostscript version 7.05) when the base color space of the document is indexed color space and it is converted through CIE color space.
8 .1 < Ordering supplies and a ccessories> 8 Ordering supplies and accessories This chapter provides information on purchasing cartridges and accessories available for your machine .
9 .1 < Installing acces sories> 9 Installing accessories Y our machine is a full-featured mode l that has been optimized to me et most of your printing needs. Recognizing that each user may have different requirements, however , Samsung makes several accessories available to enhance your ma chine’s capa bilities .
9 .2 < Installing acces sories> 5 Press the memory module i nto the slot with care until you hear a 'click'. Caution Do not press the memory module strongly or the module may be damaged. If the module does not seem to fit into the slot properly , carefully try the previous procedure again.
10 .1 < Specifications> 10 Specifications Note The numbers herein is subject to change according to its install environment. Item Specifications a nd Descriptio n Printing speed a Black and white: Up to 19 ppm b in A4 (19 ppm in Letter ) Color: Up to 5 ppm in A4(Letter) Printing resolution Max.
11 .1 < Glossary> 11 Glossary BOOTP It stands for Bootstrap Protocol, a network protocol used by a network client to obtain its IP address automatically . This is usually done in the bootstrap process of computers or operating systems running on them.
11 .2 < Glossary> ISO The International Organizatio n for S tandardization (ISO) is an international standard-setting body composed of representatives from national standards bodies. It produces world-wide industrial and commercial standards. LED A light-emitting diode (LED ) is a semiconductor device th at indicates the status of a machine.
1 C card stock, print 4.9 cleaning inside 6.1 outside 6.1 configurati on report 6.1 control board cover 1.2 control panel 1.2 , 1.3 custom-sized materials, print 4.9 D Display 1.3 driver feature 2.1 installation 3.3 E envelopes, print 4.7 F from the website 6.
Samsung Printer Software section.
1 S OFTWARE SECTION C ONTENTS Chapter 1: I NSTALLING P RINTER S OFTWARE IN W INDOWS Installing Printer Software .. ............ ........... ............... ............ ............ .............. ............ ......... ..... 4 Installing Software for Local Printing .
2 Using Watermarks .......... ............... ........... ............ ............ ............ ............... ........... ............ ... 21 Using an Existing Watermar k ............... .............. ............ ............ ............ .......
3 Printers Configuration ............. .............. ............ ............ .............. ............ ............... ....... 29 Ports Configuration ............ ............ ............ ............ .............. ............ ............ ...
Installing Printer Software in Windows 4 1 Installing Printer Software in Windows This chapter include s: • Installing Printer Software • Reinstallin g Printer Softwar e •R e m o v i n g P r i n.
Installing Printer Software in Windows 5 N OTE : If your printer is not already connected to the computer , the following window will appe ar . • After conne cting the printer , click Next . • I f you don’t want to connect the printer at this time, click Next , and No on the following screen.
Installing Printer Software in Windows 6 4 Select Custom ins tallation . Click Next . 5 Select your printer a nd click Next . N OTE : If your printer is not already connected to the computer , the following window will appe ar . • After conne cting the printer , click Next .
Installing Printer Software in Windows 7 Installing Software for Network Printing When you connect y our printer to a network, you must first configure the TCP/IP settings fo r the printer . After you have assigned and verifie d the TCP / IP settings, you are read y to install the software on each comp uter on the network.
Installing Printer Software in Windows 8 Samsung. If you so desire, select the corresponding checkbox(es) and click Finish . Otherwise, just click Finish . N OTE : After setup is complete, if your printer driv er doesn’t work properly , reinstall the printer driv er .
Installing Printer Software in Windows 9 5 The list of printers av ailable on the network appears. Select the printer you w ant to install from the list and then click Next . • If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network.
Installing Printer Software in Windows 10 Reinstalling Printer Software Y ou can reinstall the software if installation fails. 1 Start Window s. 2 From the Start menu select Programs or All Programs → your printer dr iver name → Maintenance . 3 Select Repair and click Next .
Installing Printer Software in Windows 11 Removing Printer Software 1 Start Window s. 2 From the Start menu select Programs or All Programs → your printer dr iver name → Maintenance . 3 Select Remove and click Next . Y ou will see a component list so that y ou can remov e any item individually .
Basic Printing 12 2 Basic Printing This chapter explains the printing options and common printing tasks in Windows. This chapter include s: • Printing a Do cument • Printing to a file (PRN) •P r.
Basic Printing 13 Printing to a file (PRN) Y ou will sometimes nee d to save the print data as a file for your purpose. T o create a file: 1 Check the Print to file box at the Print window. 2 Select the folder and assign a na me of the file and then click OK.
Basic Printing 14 Layout Tab The Layout tab provides options to adjust how the document appears on the printe d page. The Layout Option s includes Multiple Pa ges per Side , Poster Printing and Booklet Printing . See “Print ing a Docume nt” on page 12 for m ore information on accessing printer pr operties.
Basic Printing 15 Plain Paper : Normal plain paper . Select th is type if your printer is monochrome and printing on the 16 lb (60 g/m 2 ) cotton paper . Recycled Paper : 20 lb to 24 lb (75~90 g/m 2 ) recycled paper . Color Paper : 20 lb to 24 lb (75~90 g/m 2 ) color-backgrounded paper .
Basic Printing 16 Extras Tab Y ou can select output options fo r your document. See “Printing a Document” on page 12 for more information about accessing the printer properties. Click the Extras tab to access the following feature: Watermark Y ou can create a background text image to be printed on each page of your document.
Basic Printing 17 Using a Favorite Setting The Favorites option, which is visible on each p roperties tab, allows you to save the current properties settings for future use. To s a v e a Favorites item: 1 Change the settings as needed on each tab . 2 Enter a name for the item in the Favorites input box.
Advanced Printing 18 3 Advanced Printing This chapter explains printing options and adv anced printing tasks. N OTE : • Y our printer driver Propertie s window that appear s in this User’s Guid e may differ depend ing on the printer in use. However the com position of the printer properties window is similar .
Advanced Printing 19 Printing Posters This feature allows you to print a single-page document onto 4, 9, or 16 sheets of paper , for the purpose of pasting the sheets together to form one poster-size d ocument. 1 T o change the print settings from yo ur software application, access printer propertie s.
Advanced Printing 20 Printing on Both Sides of Paper Y ou can print on both sides of a sheet of paper . Before printing, decide how you want yo ur document oriented. The options are: • None • Long Edge , which is the conventional lay out used in book binding.
Advanced Printing 21 Using Watermarks The W atermark option allows you to print text over an existing document. F or example, you may w ant to have large gra y letters reading “DRAFT” or “CONFIDENTIA L ” printed diag onally across the first page or all pages of a document.
Advanced Printing 22 Using Overlays What is an Overlay? An overla y is text and/or images stored in the comp uter hard disk drive (HDD) as a special file fo rmat that can be printed on any document. Ove rlays are often used to take the place of preprinted forms and letterhead p aper .
Using Windows PostScript Driver 23 4 Using Windows PostScript Driver If you want to use the P ostScri pt drive r provided with your system CD-ROM to print a document. PPDs, in comb ination with the Po stScript driver , access printer features and allow the computer to communicate with the printer .
Sharing the Printer Locally 24 5 Sharing the Printer Locally Y ou can connect the printer dire ctly to a selected computer , which is called “host computer , ” on the network. The following procedure is for Windows XP . Fo r other Windows OS, refer to the correspon ding Wi ndows User's Guide or online help.
Using Smart Panel 25 6 Using Smart Panel Smart P anel is a program that m o nitors and informs y ou of the status of the printer , and allows you to customiz e the printer’s settings. Smart Panel is installed automatically when y ou install the printer softw are.
Using Smart Panel 26 Opening the Troubleshooting Guide Using the troubleshooting guide, you can vi ew solutions for error status problems. Right-click (in Windows or Linux ) or click (in Mac OS X) the Smart P anel icon and select Troubleshoo ting Guide .
Using Your Printer in Linux 27 7 Using Your Printer in Linux Y ou can use your machine in a Linux environment. This chapter include s: • Getting Star ted • Installin g the Unified Linu x Driver .
Using Your Printer in Linux 28 5 When the installation is complete , click Finish . The installation prog ram has add ed the Unified Driver Configurator desktop icon and Samsung Unified Driver group to the system menu for your conv enience.
Using Your Printer in Linux 29 Using the Unified Driver Configurator Unified Linux Driv er Configur ator is a tool primar ily intended for configuring Printer . After installing the Unified Linux driver , the Unified Linux Driver Configura tor icon will automatically b e created on your desktop.
Using Your Printer in Linux 30 Classes Tab The Classes tab shows a list of available printer classes. • Refresh : Renews the classes list. • Add Class... : Allows you to add a new printer class. • Remove Class : Remo ves the selected printer class.
Using Your Printer in Linux 31 Printing a Document Printing from Applications There are a lot of Li nux applications that you are allo wed to print from using Common UNIX Printing System (CUPS). Y ou can print on your machine from an y such application.
Using Your Printer with a Macintosh 32 8 Using Your Printer with a Macintosh Y our machine supports Macintosh systems with a built-in USB interface or a 10/100 Ba se- TX network interface card. When you print a file from a Macint osh computer , you can use the P ostScript driver b y installing the PPD file.
Using Your Printer with a Macintosh 33 Setting Up the Printer Set up for your prin ter will be diff erent depe nding on whi ch cable you use to connect the pr inter to your computer—the network cable or the USB cable. For a Network-connected N OTE : Some printers do not support a network interface.
34 Printing N OTES : • T he Macintosh printer’s proper ties window that ap pears in this User’s G uide may differ d epending on the printer in use. However the com position of the printer properties window is similar . • You can check your printer name in t he supplied CD- ROM.
35 Graphics The Graphics tab provides options for selecting Resolution(Quality) and Color Mode . Select Graphics form the Presets ' drop-down list to access the graphic features. • Resolution(Quality) : Y ou can select the printing resolution. The higher the setting, the sharp er the clarity of printed characters and gr aphics.
36 Printing Multiple Pages on One Sheet of Paper Y ou can print more than one page on a single she et of paper . This feature provides a cost -effective way to print dr aft pages. 1 From your Macintosh application, select Print from the File menu. 2 Select Layout .
37 S OFTWARE SECTION I NDEX A advanced printing, use 18 B booklet printing 19 D document, print Macintosh 34 Window s 12 double-sid ed printin g 20 driver, install Linux 27 E Extras properties, set 16.
38 resolution Window s 15 toner save 15 true-type option 15 software install Macintosh 32 Window s 4 reinstall Window s 10 system requ irements Macintosh 32 uninstall Window s 11 status monitor, use 2.
Rev .1.06.
デバイスSamsung CLP-350Nの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung CLP-350Nをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung CLP-350Nの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung CLP-350Nの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung CLP-350Nで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung CLP-350Nを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung CLP-350Nの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung CLP-350Nに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung CLP-350Nデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
