SamsungメーカーD-XENOGON 35の使用説明書/サービス説明書
ページ先へ移動 of 24
.
Thank you for purchasing the Schneider D-XENOGON lens. Yo u to enjoy taking pictures using autofocus or manual focus by mounting on the SAMSUNG GX-series digital SLR camera. Schneider D-XENOGON lens can be used only with SAMSUNG GX-series SLR cameras.
《 1 》 Although we have carefully designed these lenses for safe operation, please pay special attention to items marked with the following symbols when using this product. FOR SAFE USE OF YOUR LENS W ARNING This symbol indicates precautions that if not followed, could result in serious injury to the user .
《 2 》 1. Storage and mildew prevention • T ake the lens out of the protective case or camera bag, and store it in a dry , well-ventilated place. • Avoid storing the lens in a poorly ventilated location such as a closet, wardrobe, drawer , vehicle, or where insect repellent or medicine is kept.
《 3 》 ● FOREWORD ● FOR SAFE USE OF YOUR LENS ...........................................................................................1 ● PRECAUTIONS AND LENS MAINTENANCE ....................................................................
《 4 》 Schneider D-XENOGON LENS NOTE : Aperture settings are controlled automatically as if set to the auto "A" position, so accessories without an auto "A" setting cannot be used with these lenses.
《 5 》 Lens-information contacts Power zoom contacts AF coupler K AF mount K AF2 mount About the lens mount The D-XENOGON lenses are primarily designed to work with the SAMSUNG autofocus DSLR (K AF or K AF2 -mount camera), making autofocus shooting possible.
《 6 》 CAUTION: Be careful not to damage or dirty the lens-information contacts and AF cou- pler on the mount surfaces of the camera and lens. Otherwise, failure or malfunctionmay occur . Lens Mount Compatibility D-XENOGON lens mount compatibility chart is shown below .
《 7 》 1 2 MOUNTING AND REMOVING THE LENS 1. To mount the lens on the camera body Attach the lens while aligning the red dots on the lens and body , then turn the lens clockwise until it clicks in place. 2. To remove the lens Hold down the lens unlock button on the camera body and turn the lens counterclockwise.
《 8 》 LENS CAP T ake off the lens cap by pressing the two tabs inward as shown above. 2. Memo: • When not using the lens, be sure to attach the lens cap.
《 9 》 1 FOCUSING Changing the Focus Mode Use the camera ’ s focus mode switch to change between the autofocus mode (SAF , CAF) and manualfocus mode. For details, refer to your camera ’ s manual. 1. Using Autofocus Set the camera ’ s focus mode to autofocus (SAF , CAF).
《 10 》 Focusing with the OK Button With the GX-1S/1L camera set as explained below, auto focusing by pressing the shutter button halfway will be disabled and the OK button can be used instead to auto focus. On the [C Custom menu], select [Enable AF] for [OK btn when shooting].
《 11 》 2 2. Using Manual Focus Set to MF with the camera’s focus mode, and turn the focusing ring to focus manually ..
《 12 》 FOCUSING 22 6 1 1 1 8 6 . 5 4 2 A 7 3 1 2 2 0.7 5 . 0 t f m In auto focus mode Y ou can adjust focus on the subjects automatically by pressing the shutter but- ton halfway . In manual focus mode Y ou can adjust focus on the subjects by turning the focusing ring manually .
《 13 》 APERTURE CONTROL Setting the aperture to "A"(Auto) T urn the aperture ring to align the aperture-A index with the line while depressing the Aperture-A-lock button. The aperture ring can be released from "A" in the same manner to set your desired f-stop manually .
《 14 》 Lens hood attaching index In order to avoid the deterioration in image quality from internal reflection, use of the lens hood is recommended. AT T ACHING THE LENS HOOD When attaching the lens hood, align the index on the lens hood with the attaching index on the lens, and push both parts straight toward each other .
《 15 》 Make sure the filter size matches the lens and then attach the filter onto the lens. FIL TERS 2. Precaution on filters • Since the filter becomes a part of the optics when attached on the lens, handle it in the same way you handle the lens with care to dust, dirt and scratches.
《 16 》 PRECAUTIONS WHEN USING THE LENS WITH A FLASH Built-in Flash When the flash is used for too close distance, the incorrect exposure control and vignetting in the picture may occur . It is recommended to take a test shot before using the built-in flash.
Elements in groups Angle of View Aperture Mount T ype Lens Hood Filter Size W eight 《 17 》 MAIN SPECIFICA TIONS Minimum Focus Distance Maximum Magnification Max. Diameter x Length 5 groups, 6 elements 63 ˚ F2 PENT AX K AF mount SCH-A49 49mm 195g 0.
《 18 》 For customers in USA ST A TEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
MEMO 《 19 》.
MEMO 《 20 》.
MEMO 《 21 》.
AD68-01764A.
デバイスSamsung D-XENOGON 35の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung D-XENOGON 35をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung D-XENOGON 35の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung D-XENOGON 35の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung D-XENOGON 35で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung D-XENOGON 35を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung D-XENOGON 35の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung D-XENOGON 35に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung D-XENOGON 35デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
