SamsungメーカーDigimax 202の使用説明書/サービス説明書
ページ先へ移動 of 100
Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax 202, including capturing images, downloading images and using the MGI PhotoSuite III SE software. Please read this manual carefully before using your new camera.
2 Instructions Use this camera in the following order Insert the USB cable Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM.
3 Contents Getting to know your camera 5 About the icons 5 Danger 6 Warning 6 Caution 7 An FCC warning 7 This digital camera can be used for 8 Manufacturer's contents 10 Identification of features 11 Front & Top 11 Back & Bottom 11 Side/ 5-function button 12 Mode dial 12 Connecting to a Power Source 14 Using the AC power adapter (3.
4 Contents Delete button 45 Setting up the play back function using the LCD monitor 46 Starting the slide show 47 Protecting images 48 Deleting all images 49 Copy to card 50 DPOF : Setting the Number .
5 Getting to know your camera Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as Batteries, Memory card etc.
6 Danger Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service Center.
7 Caution Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera. Do not short circuit, heat or dispose of batteries in fire. Do not insert the batteries with the reverse polarities.
8 This digital camera can be used for Printing images using a dedicated printer, DPOF-compatible printer or DPOF-equipped photo lab. (refer to page 51) Downloading image files from camera to computer. (refer to page 81) Editing images on a PC. (refer to page 88) Taking a picture.
9 This digital camera can be used for Inserting images directly into any electronic document. Taking a self-portrait and using the image to personalize name cards. You can even create your own unique gift wrap paper by using your digital images. Creation of a digital photo album.
10 Manufacturer's contents Please check that you have the correct contents before using this product. marked contents are optional. Digital Camera USB cable Pouch 2 AA Alkaline Batteries Camera strap Software CD Product warranty User manual AC adapter (3.
11 Identification of features Front & T op Back & Bottom * When using the digital zoom to take a picture, the composition of the picture may be different depending on whether you are using the LCD monitor or the viewfinder. The picture will be taken in the composition of the picture as it appears on the LCD monitor.
12 Identification of features You can select the desired working mode by using the mode dial located on the back of the camera. This digital camera has 6 recording modes.
13 Identification of features The meaning of the camera operation mode icons used in this manual are as follows: This mode allows users to add frame-like borders to a still image and save it. 4 types of frames are available. Photo Frame mode A movie clip can be recorded for as long as the available recording time of the memory capacity allows.
14 Identification of features Camera status lamp Color Status Camera Status Blinking and off Power on processing When the LCD monitor is turned off When the USB cable is connected Blinking slowly Flash recharging Image processing(compression/decompression) USB busy On Blinking fast Green Self-timer lamp (Based on 10-second Self-timer; see p.
15 Connecting to a Power Source If you have access to a mains supply, using an AC Adapter (3.3V 2.0A) allows the camera to be used for long periods of time. Plug the adapter into the connection point (DC IN 3.3V) on the camera. Remove the batteries from the camera when using an AC adapter.
16 Connecting to a Power Source Battery status Battery indicator The batteries are fully charged. Prepare new batteries. There is no battery capacity. Replace with new batteries. There are 3 indicators for battery condition that are displayed on the LCD monitor.
17 Instructions on how to use the memory card The camera comes with 6MB of internal flash memory, allowing you to store images and movie clips in the camera. However, you can expand the memory capacity by using an optional memory card so that you can store more images and movie clips.
18 Instructions on how to use the memory card If you open the memory card cover when the camera power is turned on, the power will turn off automatically. Don't remove the memory card when the camera status lamp(Green) is blinking as this may cause damage to data in the memory card.
19 Inserting the memory card Do not insert the memory card the wrong way round . Doing so may damage the memory card slot. INFORMA TION 1. Turn the power off using the power button. Open the battery chamber cover and press the memory card as shown in the image and release.
LCD monitor indicator 20 [ Image & Full Status ] No. Description Icons Page 1 Battery p.16 2 Recording mode p.12~13 3 Camera shake warning p.24 4 Flash p.28 5 Self-timer p.29 6 Macro p.31 7 Metering p.36~37 8 Time 01:00 PM p.59 9 Date 2004/ 01/ 01 p.
LCD monitor indicator 21 14 Image quality p.35~36 15 Image size 1600, 1024, 640 p.35 Number of available shots remaining 9 Remaining time 00:24 p.22 17 Digital Zoom rate X2.0 p.26 18 Digital zoom Starting the recording mode 1. Insert the batteries (p.
Starting the recording mode 22 Using MySET Mode This mode allows users to save frequently used shooting settings for later use. Steps 1 through 4 are the same as for shooting still images. 5. Rotate the Mode Dial to MySET mode ( ). 6. You can use the menus that appear when you press camera and menu buttons to change the desired camera functions.
Starting the recording mode 23 SEPIA mode Steps from 1-4 are the same as those for recording a still image. 5. Rotate the Mode Dial to SEPIA mode ( ). 6. Point the camera towards the subject and compose the image by using either the viewfinder or LCD monitor.
Starting the recording mode 24 When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera shake warning indicator ( ) may appear on the LCD monitor. In this case, use a tripod, support the camera on a solid surface or change the flash mode to flash shot mode.
25 Using the camera buttons to adjust the camera The RECORDING mode function can be set up by using the camera buttons. POWER button SHUTTER button Used for digital zooming in / out. When you press the zoom (W/T) button, the zoom bar will display in the upper and center part of the LCD monitor.
26 WIDE / TELE button TELE Zoom Digital zoom TELE : Pressing the zoom button T activates the digital zoom software. Releasing zoom button T stops the digital zooming at the required setting. Once the maximum digital zoom (2X) is achieved, pressing the zoom button T will have no effect.
27 Up/Down button When the menu is displayed on the LCD monitor, pressing the UP button makes the menu cursor move up. While the menu is showing, press the DOWN button to move from the main menu to a submenu, or to move down the submenu cursor. Unless the menu is showing, the Up/DOWN button will not work in a Recording mode.
28 FLASH( ) / LEFT button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the sub tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self- timer( ) button. This function is used when the photographer would also like to be in the image.
29 Self-timer( ) / Right button [ Selecting the 10SEC self-timer ] The default is OFF. When taking a picture using the self-timer, the self-timer lamp works as follows: 10 second self-timer setting : The self-timer lamp blinks at 1 second intervals for the first 7 seconds.
30 +/- button You can use the +/- button to adjust the values for the exposure compensation. Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the +/- button.
31 Focus lever To prevent the image from being dim, maintain the focus range at 0.19m ~ 0.21m. INFORMA TION To prevent the image from being dim, maintain the focus range at 1.0m ~ infinity. INFORMA TION Normal( ) focus mode The focus range is 1.0m ~ infinity.
32 MENU/ OK button If the menu is displayed, use the 5-Function buttons to change the data values and for your changes to be accepted. If the menu is not displayed, press the MENU/OK button to display a menu for the current camera mode on the LCD monitor.
33 Using the LCD monitor to adjust the camera settings You can use the menu on the LCD monitor to set up recording functions. The following functions are available, depending on the mode you have selected.
34 Using the LCD monitor to adjust the camera settings How to use the menu 3. Use the UP and DOWN buttons to select a sub menu. 4. Select a sub menu, and then press the OK button. The value you set will be saved and the menu will disappear. 1. Turn on the camera and press the MENU button.
35 Size You can select the image size appropriate for your application. This menu is not available in the MOVIE CLIP mode. The higher the resolution, the lower the number of available shots will be because high resolution images require more memory than lower resolution images.
36 Quality If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. This menu is not available in the MOVIE CLIP mode. When using a 6MB internal memory, the specified shooting capacity will be as follows.
37 Metering If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, rather use exposure compensation. INFORMA TION Sharpness You can adjust the sharpness of the picture you want to take.
38 White balance White balance : The white balance control allows you to adjust the colours to appear more natural looking. This menu is available in every recording mode. White balance - AUTO : The camera automatically selects the appropriate white balance settings, depending on the prevailing lighting conditions.
39 Effect Selecting a Photo Frame 1. Rotate the Mode Dial to Photo Frame mode ( ). 2. Press the MENU button, and then use the LEFT and RIGHT buttons to select [P. FRAME]. 3. Press the OK button. A window where you can choose a photo frame will open. 4 .
40 LCD monitor indicator The LCD monitor displays information about the shooting conditions. SIZE : 1024X768 Size DATE : 2004/01/01 Recording date TIME : 17:40:21 Recording time FLASH : NONE Whether or not the flash is used.
41 Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. Press the play mode button ( ) again to switch to the Recording mode. You can set up the PLAY mode function by using the camera buttons and LCD monitor.
42 Starting play mode In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the LEFT/RIGHT button.
43 Thumbnail ( ) / Enlargement ( ) button [ Normal display mode ] [ Thumbnail display mode ] Pressing the thumbnail button( ) Pressing the enlargement button( ) Highlighted image 100-0009 Trimming : You can extract part of the image that you want and save it separately.
44 Play & Pause ( )/ Down button In Play mode, the play & pause/ down button works as follows: - If the menu is displayed Press the DOWN button to move from the main menu to a sub menu, or to move down the sub menu cursor. - If a movie clip is playing In Stop mode : Plays a movie clip.
45 LCD ( ) button The shooting information will be displayed on the LCD monitor. The last image stored in the memory is displayed on the LCD monitor by pressing the play mode button. Pressing the LCD button in the PLAY( ) mode will change the display as shown below.
46 Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows.
47 Images can be displayed continuously at pre-set intervals. Starting the slide show 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [SLIDE] menu tab. 3. Press the DOWN button. 4. Use the UP and DOWN buttons to select the desired submenu value, and then press the RIGHT button.
48 Protecting images Protecting Images 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [PROTECT] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button. - [ONE PIC] : Only an image that is displayed on the LCD monitor is protected or unprotected.
49 Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Deleting all images Deleting All images 1. Press the play mode button and press the menu button. 2 . Press the LEFT/ RIGHT button and select the [DEL.
50 Copy to card This enables you to copy image files to the memory card. Copy to card 1. Press the play mode button and press the MENU button. 2. Select the [COPY TO CARD] menu tab by pressing the LEFT/ RIGHT button. 3. Select the desired sub menu by pressing the UP/DOWN button and press the OK button.
51 DPOF : Setting the Number of Copies to Print This function allows you to embed print quantity information on your memory card. This function is not available for Movie clips. The DPOF file is only stored on the memory card. Specifying the Number of Prints 1.
52 Rotating an image You can rotate the stored images by 90, 180, or 270 degrees. 1. Press the play mode button and press the menu button. 2 . Press the LEFT/ RIGHT button and select the [ROTATE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button.
53 A stored image size can be changed and used as a logo image. The resized image will have a new file name. Resize 1. Press the play mode button and press the menu button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
54 Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes. The items indicated by are default settings. Menu tab Main menu Sub menu Secondary menu Page RESET - SERIES - ENGLISH - KOREAN - FRENCH - GERMAN - SPANISH - ITALIAN - S.
55 Setup menu Menu tab Main menu Sub menu Secondary menu Page ON OFF 50Hz 60Hz OFF NO YES NO YES 1 ~ 3 SEC BEEP FREQUENCY Q.VIEW LATEST RESET This function allows the user to select the file naming format. Assigning File Names 1. Press the MENU button.
56 File name The first stored folder name is 100SSCAM, and the first file name is S2020001. Whenever you store an image, the file number is increased by 1. The file numbers are named from S2020001 to S2029999 automatically, 9999 files will be stored in a folder.
57 Language Setting Language 1. Press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3 . Select the [LANGUAGE] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
58 Formatting a memory card Formatting a Memory Card from a PC When formatting a memory card from a Windows 2000 or XP-based PC, format the card under the "FAT" files system. When formatting a memory card, connect the camera to your PC with the USB cable.
59 Date Setup You can change the time that will be displayed on the captured images. Setting the Time 1. Press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Use the UP and DOWN buttons to select [TIME], and then press the RIGHT button.
60 Imprinting date recording There is an option to include DATE/TIME on still images. Beep If you set the operation sound to ON, various sounds will be activated for camera startup, when buttons are pressed, and if there is a card error, so that you can be aware of the camera operation status.
61 Frequency The alternating current frequency influences the image quality. If you don't select the same [FREQUENCY] sub menu as your nation's alternating current frequency, there will be a line on a stored image. Should this be the case, change the [FREQUENCY] sub menu.
62 Quick view If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images. Setting Quick View 1. Press the MENU button.
63 Latest The most recent changes made to the camera setting values since [LATEST] has been set to [YES] will be maintained. The changed setting values are maintained even after the camera is turned off and then back on. Saving Camera Functions 1. In any mode other than MySET mode, press the MENU button.
64 Start up sound You can set the startup sound at power-on. Setting the Startup Sound 1. Press the MENU button. 2. Press the LEFT/ RIGHT button and select the [MYCAM] menu tab. 3. Select the [S.BEEP] menu by pressing the UP/ DOWN button and press the RIGHT button.
65 Important notes Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt.
66 Important notes If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used.
67 W arning indicator There are several warnings that may appear on the LCD display Warning indicator Causes Remedy Insert a new CARD or delete stored images to free up some memory. There is insufficient memory capacity to take an image. When taking pictures in dark places.
68 Before contacting a service center Please check the following Symptom Causes Remedy - Insert fresh batteries - Connect an AC Power Adapter - There is low battery capacity - An AC Power Adapter is not connected - The batteries are exhausted - The Camera is turned off automatically.
69 Before contacting a service center Symptom Causes Remedy - Remove / re-insert batteries and switch camera on - Camera malfunction - Incorrect memory card format - White balance setting is incorrect. - Exposure is excessive. The camera buttons do not operate A card error has occurred while the memory card is in the camera.
70 Specifications Type 1/2" CMOS mage Sensor Effective Pixels Approx. 2.0 Mega-pixels Total Pixels Approx. 2.1 Mega-pixels Lens f = 9.0mm (35mm film equivalent : 47mm) Lens F No. F3.5 Still Image mode : 1.0X ~ 2.0X Play mode : 1.0X ~ 3.0X (depends on image size) Optical Viewfinder Optical virtual image viewfinder LCD Monitor 1.
71 Specifications Specifications are subject to change without prior notice. File Format Still image : JPEG(DCF), DPOF Movie clip : AVI 1600:1600x1200 Pixels, 1024:1024x768 Pixels 640:640x480 Pixels 1.
72 Software Notes Please ensure that you read the instruction manual carefully before use. The attached software is a camera driver and image editing software tool for Windows. Under no circumstances should all or part of either the software or the user manual be reproduced.
73 About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. Camera driver : This enables images to transfer between the camera and PC.
74 Setting up the application software To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. You can visit the Samsung web-site through the internet.
75 Setting up the application software If you select [Cancel] at step 3, a window for installing MGI PhotoSuite III SE will be displayed. INFORMA TION 3. Install Digimax Viewer. Click [Next >]. 4. The Software License Agreement window will be displayed.
76 Setting up the application software 7. Installation is completed. The [MGI PhotoSuite III SE] installation window will be displayed as shown alongside. Click the [OK] button. 8. A [Welcome] window will be displayed. Click the [Next >] button. 9.
77 Setting up the application software 12. The MGI Registration window will be displayed. Click the [Continue] button. 13. The [Online Registration Utility] window will be displayed.
78 Setting up the application software 15. Installation is complete. Click the [Finish] button. 18. Turn the camera power on. [Found New Hardware Wizard] will open and the computer will recognize the camera. If you have ever installed an image viewer program or your OS is Windows XP, an image viewer program will open.
79 Setting up the application software If you have installed the camera driver, [Found New Hardware Wizard] may not open. After the [Found New Hardware Wizard] window opens, a window asking you to select a driver file may appear. In this case, specify the C:WINDOWSINF folder (for Windows 98 and 98 SE).
80 Starting PC Mode If you insert the USB cable into the USB connection terminal, the camera working mode will change to the PC mode automatically. In this mode, you can download stored images to your PC through the USB cable. The LCD monitor is always turned off in PC mode.
81 Starting PC Mode 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click [Cut] or [Copy] menu. - [Cut] : cuts a selected file.
82 Starting PC Mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - You can view the pictures on the memory card if it is inserted into the camera. - If the memory card is not inserted, the pictures stored in the internal memory will appear.
83 Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1. Trace [Start Settings] and click [Control Panel]. [Click!] [Click!] 4. A window will open. Click the [YES] button and the camera driver will be removed.
84 Removable Disk To use this camera as a Removable Disk, install (p.73) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (DCIM 100SSCAM) can be transferred to the PC.
85 Removing the removable disk [Click!] [Double-click!] [Click!] [Click!] Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, you have to wait until the lamp illuminates. 2. Unplug the USB cable. Windows 2000/ME/XP 1.
86 Removing the removable disk 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This camera is compatible with MAC OS 9.1~10.
87 Digimax V iewer This software is only compatible with Windows. 1. To open Digimax Viewer, click the [ Start Programs Samsung Digimax Viewer 2.0 Digimax Viewer 2.0 ] and Digimax Viewer 2.0 will then open. 2. If the [Auto Launch] option is selected, this program will be executed automatically upon recognizing the camera.
88 MGI PhotoSuite III SE This software is only compatible with Windows. To open MGI PhotoSuite lll SE, click the [Start Programs MGI PhotoSuite lll SE MGI PhotoSuite lll SE] and MGI PhotoSuite lll SE will then open. An introduction to the Welcome screen Get Get images.
89 MGI PhotoSuite III SE Introduction to navigation bar Back Return to the previous step. Home Return to Welcome screen. Help Display help window. Get Get images. Prepare A number of photo editing activities can be performed within this module. Compose Use your photos in a variety of fun and interesting ways.
90 MGI PhotoSuite III SE Get When you obtain images from the digital camera. 1. To acquire images, click the large [Get] button on the Welcome screen, or the [Get] button on the Navigation bar. Click [Computer] from the list of options displayed on the activity panel.
91 MGI PhotoSuite III SE 3. Select the [ DCIM 100sscam ] folder. Then select an image and click [ Open ]. INFORMA TION 4. The Welcome screen will change to the next work step, with the selected image displayed.
92 MGI PhotoSuite III SE 2 . After selecting Album on the [ Choose a photo album], click an image in the album and click [Open]. 3. The Welcome screen will change to the next work step, with the selected image displayed. Refer to page. 95 for more information about creating an Album.
93 MGI PhotoSuite III SE Compose Add text, Compound Images etc. are available in this step. Menu of [COMPOSE] steps Collages : A collage consists of several photos or sections of photos arranged together on a common background. Photo Layouts : The Photo Layouts activity includes many collage and layout options.
94 MGI PhotoSuite III SE Organize Organize your photos and other media files into albums. Menu of [ORGANIZE] steps [ Choose a photo album to view or edit] Select Album : To create an Album, click [Organize] in the welcome screen or navigation bar. Album.
95 MGI PhotoSuite III SE Creating an Album 1. To create an Album, click the large Organize button on the Welcome screen, or the Organize button on the Navigation bar. 2. Click [Album..] in [ Choose a photo album to view or edit.] 3. The Master Album window will be displayed, then click [New.
96 MGI PhotoSuite III SE 1. Select [ Choose an action to manage your album. Add..] to add images to the album. 2. Click [Computer] in Add Photos menu. [Digital Camera(Direct)], [Scanner(TWAIN)], [Digital Camera(TWAIN)] sources can't be used. Add images to the album [Click!] [Click!] 3.
97 MGI PhotoSuite III SE Menu of [SHARE] steps Save To save the active file according to its current name and path. Save As To assign a new name or path to the file. Send E-mail e-mailing images. Slide Show Viewing images as a slide show. Saving or sharing images.
98 FA Q Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. Turn the camera power on. We recommend using an AC power adapter in PC mode. [Case 2] USB Driver is not installed correctly. Install the USB Driver correctly.
99 FA Q Win XP : Trace [Start Control Panel Performance and Maintenance System Hardware Device Manager Universal Serial Bus controller]. There must be USB Host Controller and USB root hub under [Universal serial bus controller].
Thank you for buying a Samsung Camera. This manual will guide you through using the Digimax 202, including capturing images, downloading images and using the MGI PhotoSuite III SE software. Please read this manual carefully before using your new camera.
デバイスSamsung Digimax 202の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung Digimax 202をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung Digimax 202の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung Digimax 202の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung Digimax 202で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung Digimax 202を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung Digimax 202の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung Digimax 202に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung Digimax 202デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。