SamsungメーカーDM55Dの使用説明書/サービス説明書
ページ先へ移動 of 192
LFD DISPLA Y User Manual The color and the appearance ma y dier depending on the product, and the specications are subject to change without prior notice to improv e the per formance .
T able of con tents Befor e Using the P roduct » Copyright » Safety Precautions Pr eparations » Parts » Before Installing the Pr oduct (Installation Guide) » Dimensions » Using the COVER- JACK .
T able of con tents Sound Adjustment » Sound Mode » Sound Effect » HDMI Sound » Sound on Video Call » Speaker Settings » Auto V olume » Reset Sound Channel » Auto P rogram » Antenna » Channe.
T able of con tents T roubleshooting Guide » Requirements Befor e Contacting Samsung Customer Service Center » Q & A Specifications » General » Po werSaver » Preset T iming Modes Appendix » .
Befor e Using the P roduc t C opyrigh t The contents of this manual are subject to change without notice to impr ove quality . © 2014 Samsung Electronics Samsung Electronics owns the copyright for this manual . Use or reproduction of this manual in parts or entirety without the authorization of Samsung Elec tronics is pr ohibited.
Safety Pr ecautions Caution RISK OF ELEC TRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELEC TRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SER VICEABLE P ARTS INSIDE. REFER ALL SER VICING TO QU ALIFIED PERSONNEL. This symbol indicates that high voltage is pr esent inside.
Stor age Due to the characteristics of high-glossy products, using a UV humidifier nearby may create white- colored stains on the product. ― Contact Customer Service Center if the inside of the product needs cleaning (ser vice fee will be charged). Electricit y and Safety ― The following images ar e for ref erence only .
Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord pr ovided with your product by Samsung . Do not use the power cord with other pr oducts. • A fire or electric shock may result.
! Bend and keep par t of the outdoor T V antenna cable hanging down wards (the part inside the room) to prevent rainwater fr om entering the product. • If rainwater enters the product, a fire or electric shock can occur .
Caution ! Do not drop the product while moving. • Pr oduct failure or personal injur y may result. Do not set down the product on its front. • The screen may become damaged . When installing the product on a cabinet or shelf , make sure that the bottom edge of the front of the pr oduct is not protruding.
Do not leave heavy objects or items that children like (toys, sw eets, etc.) on top of the product. • The product or heavy objects may fall as children try to reach for the toys or sweets r esulting in a serious injur y . ! During a lightning or thunderstorm, remove the power cable and do not touch the antenna cable.
Caution ! Leaving the scr een fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. • Activate power-sa ving mode or a moving-picture screen saver if y ou will not be using the product for an extended period of time.
Be careful that children do not place the battery in their mouths when removed fr om the remote control . Place the battery in a location that children or infants cannot reach. • If children have had the battery in their mouths, consult your doctor immediately .
- Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may diff er from the image shown. - A stand is not provided with the product. T o install a stand, you can purchase one separately .
Items sold separately - The following items can be pur chased at your nearest retailer . W all-mount Kit Stand RS232C-Stereo cable DVI cable HDMI-DVI cable DP cable HDMI cable Video cable Ster eo cabl.
P ar ts C ontrol P anel POWER ON POWER P anel Key Speaker Remote sensor ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to impr ove quality. P anel Key Buttons Description Po wer on the product.
― If you press the button on the panel key when the product is turned on, the control menu will be displayed . Con trol menu Return Buttons Description Sou rce Select the connected input source. Move the panel key right to select S ource in the control menu.
Reverse Side ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality . RGB IN RJ45 POWER ANT IN DP OUT COMPONENT IN DVI I.
Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places . ― The locking device shape and lock ing method depend on the manufacturer . Refer to the user guide provided with your anti-theft locking device for details.
- Remote control button functions may differ for diff erent products. Remote C ontrol ― Using other display devices in the same space as the remote contr ol of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product.
TOOLS INFO SET UNSET LOCK PC A DVI B HDMI C DP D EXIT RETURN IR control Display information about the current input source. Move to the upper , lower , left or right menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu.
C onnec tion Using an IR S tereo C able (sold separat ely) Make sure to connect the External ambient sensor while the product is powered off . Then, power on the pr oduct.
Befor e Installing the Pr oduc t (Installation Guide) 15 ˚ T o prevent injury, this apparatus must be securely attached t o the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount.
A B C E Figur e 1.3 Side view D D Figur e 1.2 Side view Installation on an Indented W all ― Contact Samsung Customer Service Center for further details.
Using the C OVER- JA CK T o prevent theft of the SD memor y card or an y other USB device, install the COVER- JACK. ― When using a DVI cable, make sure to cut off the side of the COVER- JACK first. ― Cut out the Cover -Jack accor ding to the DVI cable size befor e use.
Installing the W all Mount Installing the W all M ount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. F or detailed information on installing the wall mount, see the instructions provided with the wall mount. We r ecommend you contact a technician for assistance when installing the wall mount bracket.
Unit: mm (inches) Model name VESA screw hole specs (A * B) in millimeters Standard Screw Quantity DM32D 200 × 200 (7.9 × 7.9) M8 / L14~16 4 DM40D DM48D 400 × 400 (15.7 × 15.7) DM55D ― Do not install your W all Mount K it while your product is turned on.
Remote C ontr ol (RS232C) Cable C onnec tion RS232C Cable Interface RS232C (9 pins) Pin T xD (No.2), RxD (No.3), GND (No .5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow c ontrol .
• RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 1 5 9 6 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- F emale Rx Tx Gnd 2 3 5 --------> <-------- ---------- 3 2 5 Tx Rx Gnd STEREO PL UG (3.
• Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 RJ45 MDC HUB P1 P1 P2 P2 Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ T X- 2 <--------> 2 T X- RX+ 3 <--------> 3 RX+ R X- 6 <.
C onnec tion • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 RJ45 RJ45 • Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT.
C ontrol C odes V iewing contr ol state ( Get contr ol command) Header Command ID Data length Checksum 0xAA Command type 0 Con trolling (Set contr ol command) Header Command ID Data length Data Checksum 0xAA Command type 1 Value Command N o.
P ow er contr ol • F unction A product can be powered on and off using a PC. • Viewing power state ( Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power.
Input source c ontrol • F unction The input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0.
Screen mode contr ol • F unction The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the V ideo W all function is enabled.
PIP On/Off control • F unction The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if V ideo W all is set to On . ― This function is not available in MagicInfo .
V ideo W all Mode Contr ol • F unction Video W all mode can be activated on a product using a PC. This control is only available on a pr oduct whose Video W all is enabled.
V ideo W all On • F unction T urn Video W all on or off on the product from your computer . • Get Video W all On/Off Status Header Command ID Data length Checksum 0xAA 0x84 0 • Set Video W all On/Off Header Command ID Data length Data Checksum 0xAA 0x84 1 V.
10x10 V ideo W all Model 123456789 10 11 12 13 14 15 O 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D .
W all_SNo: Product Number code assigned to the pr oduct 10x10 Video W all Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ... 99 0x63 100 0x64 • Ack Header Command ID Data length Ack/Nak r -CMD.
C onnec ting and U sing a Sourc e Devic e Befor e C onnec ting Pr e - connection Check points ― Before connecting a source device , read the user manual provided with it. The number and locations of ports on source devices may differ from device to device.
C onnec tion using a DVI cable (Digital type) DVI IN / MA GICINFO IN RGB / DVI / HDMI / A V / COMPONENT / A UDIO IN C onnec tion Using an HDMI-D VI Cable ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
C onnec tion Using an HDMI C able HDMI IN C onnec tion Using an DP C able DP IN • Pr ecautions for using DP ― T o increase the standby power capacity , the product stops DP communication when it is turned off or in power-saving mode .
C onnec ting to a V ideo Devic e • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • Y ou can connect a video de vice to the product using a cable. ― Connecting par ts may diff er in different pr oducts.
C onnec tion Using an HDMI-D VI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. T o resolve this , additionally connect an audio cable to the audio por ts on the product and video device.
C onnec ting to an A udio Sy stem ― Connecting par ts may diff er in different pr oducts. A UDIO OUT C onnec ting the ant enna ― Connecting par ts may diff er in different pr oducts. ― When the product is powered on f or the first time, basic settings are configur ed automatically .
C onnec ting the LAN Cable ― Connecting par ts may diff er in different pr oducts. RJ45 • Use Cat7(*STP Type) cable for the connection. *Shielded T wist Pair.
C onnec ting the network bo x (Sold separately) ― F or details on how to connect to a network box, refer t o the user's manual provided with the network box upon purchase . MagicInfo T o use MagicInfo , a network box (sold separately) must be connected to the product.
MagicInfo Setup Wizard - v .1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: Subnet mask: Default gateway: 192 . 168 . 0 . 102 255 . 255 . 255 . 0 192 . 168 . 0 . 1 Obtain DNS server address automatically Use the following DNS server address: Preferred DNS server: Alternate DNS server: 10 .
Changing the Input sourc e So urce SOURCE → Sou rce Source USB HDMI AV Component DVI PC T o go to Options, press and hold the Enter button. - The displayed image may diff er depending on the model. - DM32D Model Only Source HDMI AV Component PC DisplayPort TV T o go to Options, press and hold the Enter button.
U sing MDC MDC Pr ogram Installation/Uninstallation Installation ― MDC installation can be affected by the graphics car d, mother board and network conditions. 1 Click the MDC Unified installation program. 2 Select a language for installation. Next, click " OK ".
C onnec ting to MDC Using MDC via RS-232C (serial data c ommunications standards) An RS-232C serial cable must be connected to the serial por ts on the PC and monitor .
Using MDC via Ethernet Enter the IP for the primary display device and connect the de vice to the PC. Display devices can be connected to each other using a LAN cable . Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 por t on the product and the LAN ports on the HUB.
Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT por t on the product. Monitor 1 Monitor 2 Computer RS232C OUT RJ45.
Home f eatur e ― T o use the Player f eature, set Pla y via to MagicInfo in Syste m . Play a range of content such as channels with schedules assig ned, templates or files. Play channels or content using an y of the following methods. • Network Channel : Play cont ent using the ser ver .
Appro ving a connected device fr om the ser v er • Set MagicInfo Mode to MagicInfo in Ser ver Network Settings . Approve and use the MagicInf o ser ver now . ― F irst configure the server Network Settings before device approval . 1 Access the server you have assigned to y our device.
7 Enter the information requir ed to approv e the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule.
Network Channel Play content, templat es and schedules configured on the server . • Y ou can view whether the ser ver is connected (approval) in the Play er menu screen. T o view whether the ser ver is connected when a Network Channel is running, pr ess INFO on the remote.
A vailable featur es in the Play er page The Play er list page provides the follo wing features . • Device Select either Internal or USB to search for a desir ed device list. - All / Internal / USB • Conten ts Select a content type as cr iterion to search f or a desired content list.
Play er page S ettings menu Settings Settings Aspect Ratio Display Duration Transition Eff ect Content Layout Safely Remove USB Landscape Set whether to display content in the original aspect ratio or full screen size. Close - The displayed image may diff er depending on the model.
When C onten t is Running V iewing the details of the cont ent that is running Information Type: CH Number: CH Name: Software Version: MAC ID: T ags: Server : USB: Schedule download: Network Channel N.
Changing the settings for the c ontent tha t is running Music Playlist Picture Mode Sound Mode Repeat - The displayed image may diff er depending on the model.
F ile F ormats Compa tible with Play er • Supported file systems include F A T32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played. Check the vertical and horizontal resolution of the file.
Con tents F ile Extension Container V ideo Codec R esolution F rame ra te (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DivX 3.
V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback.
Flash P ower P oint PDF • Compatible with Flash 10.1 • Flash Animation - Compatible file format: SWF • Recommended resolution: 960 x 540 - Caution Performance comparable to Flash P layer on a Wi.
WORD T emplate les LFD • Compatible document file formats - Extension: .doc, .docx - Version: Office 97 ~ Office 2007 • F unctions not suppor ted - P age background effect - Some paragraph styles - Wor d Art - Align A group alignment err or may occur - 3D shapes (which will be displayed in 2D) - Office 2007 SmartAr t is not fully suppor ted.
F ile F ormats Compa tible with V ideo W all ― Refer to the < MagicInfo Server user's manual> for further details. V ideo Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported.
Restrictions • Only one video ( Videos ) file can be pla yed per client. ― Different cont ent files can be played on the displays of a video wall. T wo video ( Videos ) files cannot be pla yed on a single display of a video wall.
Schedule HOME → Schedule → ENTER E 12:00 am 12:30 am 01:00 am 01:30 am 02:00 am 02:30 am 03:00 am 03:30 am 04:00 am 04:30 am 05:00 am 05:30 am Add content to create a program on the channel. Configure the display duration to set how long each item of content will play for .
Configuring channel schedules Play media content such as videos , photos and music at a desired time. 1 Select a channel to configure. 2 Select video, music and photo content you want to apply t o the channel schedule. 3 Set the time to play the schedule.
T empla te HOME → T emplate → ENTER E My template Market: All Layout: Landscape 1 / 64 item(s) Select a template to customize. T emplate - The displayed image may diff er depending on the model. - The T emplate function is disabled if Video W all is set to On .
2 Organize a templat e by inserting tex t, video, phot o, or PDF files as desired . Entering te xt New town interior design Sustainble evolution unfolods tomorrw’s design Background Screen Background Music Select in the editable zone to add content or edit the existing text.
Preview New town interior design Sustainble evolution unfolods tomorrw’ s design T emplate preview is running. It will disappear after 20 seconds. 1 Pr eview the created template using the Pr eview feature. 2 T o save the template , press the Save button.
Clone P roduct HOME → Clone Product → ENTER E Clone Pr oduct - The displayed image may diff er depending on the model. Export the product settings to a USB device or load the settings via a USB de vice. This option is useful when assigning the same settings to several pr oducts.
ID Settings HOME → ID Settings → ENTER E ID Settings - The displayed image may diff er depending on the model. Assign an ID to a set. Pr ess u / d to select a number , and press E . Device ID Enter the ID number of the product connected to the input cable for input sig nal reception.
V ideo W all HOME → Video W all → ENTER E Video W all - The displayed image may diff er depending on the model. Customize the lay out of multiple displays that are connected to f orm a video wall. In addition, display par t of a whole picture or repeat the same picture on each of the connected multiple displays.
V ideo W all Y ou can activate or deac tivate V ideo W all . T o organize a video wall, select On . • Off / On Horizontal x V er tical This featur e automatically splits a videowall display based on a videowall matrix configuration. Enter the videowall matrix.
Natwork S tatus HOME → Natwork Status → ENTER E Natwork Status - The displayed image may diff er depending on the model. Check the current network and Internet connec tion.
Picture Mode HOME → Picture Mode → ENTER E Picture Mode - The displayed image may diff er depending on the model. Select a picture mode ( Picture Mode ) suitable for the environment wher e the product will be used. • Shop & Mall Suitable for shopping malls.
On/O T imer HOME → On/O ff T imer → ENTER E On/Off Timer - The displayed image may diff er depending on the model. ― Y ou must set the clock before you can use On/Off Timer . On Timer Set On Timer so that your pr oduct turns on automatically at a time and on a day of your choosing.
O Timer Set the off timer ( Off Timer ) by making a selec tion from one of the seven options . ( Off Timer 1 ~ Off Timer 7 ) • Setup : Select O ff , Once , E ver yday , Mon~Fri , Mon~Sat , Sat~Sun or Manual . If you select Manual , you can choose the days you want Off Timer to turn off your product.
T icker HOME → Ticker → ENTER E Ticker - The displayed image may diff er depending on the model. Input text while a video or image is displayed and display the text on the screen. • Off / On • Message : Enter a message to display on the screen.
URL Launcher HOME → URL Launcher → ENTER E URL Launcher 12:00 Play various contents sych as scheduled channels, templates or files. Change URL pm January 1 2014 Clone Product Picture Mode ID Settings On/Off Timer Video Wall Ticker Network Status More settings - The displayed image may diff er depending on the model.
Screen A djustment Configure the Picture settings ( Backlight , Color T one , etc.). The layout of the Picture menu options may vary depending on the product.
Back light / C ontrast / Brightness / Sharpness / C olor / Tin t ( G/R) MENU m → Picture → ENTER E · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Color Tint ( G/R) T erminal & Station 100 70 45 65 50 G50 R50 - The displayed image may diff er depending on the model.
C olor T emper ature MENU m → Picture → Color T emperature → ENTER E Picture Color T emperature 10000K - The displayed image may diff er depending on the model. Adjust the color temperature (Red / Gr een / Blue). (Range: 2800K–16000K ) ― If Color T one is set to Off , Color T emperature is disabled.
Whit e Balance MENU m → Picture → White Balance → ENTER E Picture White Balance - The displayed image may diff er depending on the model. 2 P oint Adjust the color temperature f or a more natural picture. • R-Offset / G- Offset / B-O ffset : Adjust each color’ s (red, green, blue) darkness.
Gamma MENU m → Picture → Gamma → ENTER E Picture Gamma 0 - The displayed image may diff er depending on the model. Adjust the primary color intensit y .
A dvanced Settings MENU m → Picture → Advanc ed Settings → ENTER E Advanc ed Settings Dynamic Contrast Black T one Flesh T one RGB Only Mode Color Space Motion Lighting Medium Darker 0 O Native O - The displayed image may diff er depending on the model.
Advanc ed Settings Dynamic Contrast Black T one Flesh T one RGB Only Mode Color Space Motion Lighting Medium Darker 0 O Native O - The displayed image may diff er depending on the model. Dynamic Contr ast Adjust the screen contrast. • Off / Low / M edium / High Black T one Select the black level to adjust the screen depth.
Picture Options MENU m → Picture → Picture Options → ENTER E Picture Options Color T one Digital Clean View MPEG Noise F ilter HDMI Black Lev el F ilm Mode Dynamic Back light O O O Normal O O - The displayed image may diff er depending on the model.
Picture Options Color T one Digital Clean View MPEG Noise F ilter HDMI Black Lev el F ilm Mode Dynamic Back light O O O Normal O O - The displayed image may diff er depending on the model. C olor T one If the input source is PC , DVI or HDMI (PC connection), DisplayPort .
Picture Options Color T one Digital Clean View MPEG Noise F ilter HDMI Black Lev el F ilm Mode Dynamic Back light O O O Normal O O - The displayed image may diff er depending on the model. HDMI Black Lev el Selects the black level on the screen to adjust the screen depth.
Picture Siz e MENU m → Picture → Picture Size → ENTER E · Picture Siz e Picture Size 16:9 P osition Resolution O - The displayed image may diff er depending on the model. choose size and aspect ratio picture displayed on screen. Picture Size ― Different scr een adjustment options are displayed depending on the curr ent input source.
P osition · Picture Siz e Picture Size Custom P osition Resolution O - The displayed image may diff er depending on the model. Adjusts the picture position. P osition is only available if P icture Size is set to Zoom1 , Z oom2 , Wide F it , Screen F it or Custom .
Resolution If the picture is not normal even when the resolution of the graphics card is one of the follo wing, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu.
A uto A djustment MENU m → Picture → Auto A djustment → ENTER E Picture Auto A djustment - Available in PC mode only . - The displayed image may diff er depending on the model. Adjust frequency values/positions and fine tune the settings automatically .
Picture O MENU m → Picture → Picture Off → ENTER E Picture Picture O - The displayed image may diff er depending on the model. Selecting Picture Off switches off the screen. The volume is not disabled. T o switch the screen on, press an y button other than the volume button.
OnS cr een Display PIP MENU m → OnScreen Display → PIP → ENTER E OnScreen Display PIP Rotation Screen Pr otection Message Display Menu T ransparency Menu Language Caption Medium English O - The displayed image may diff er depending on the model.
PIP PIP Source Antenna Channel Size Position Sound Select On TV Air Air 4 Õ Ã Main OK - The displayed image may diff er depending on the model. • PIP ( Off / On ): Activate or deactivate the PIP function. • Sou rce : Y ou can select a source of the sub picture.
Rotation MENU m → OnScreen Display → Rotation → ENTER E Rotation Rotate Menu Rotate Cont ent Aspect Ratio Landscape Landscape F ull Screen - The displayed image may diff er depending on the model. Rotate Menu Configure the menu scr een. • Landscape : Display the menu in landscape mode (default).
Screen P rot ec tion MENU m → OnScreen Display → Screen Pr otection → ENTER E Screen P rotection Auto P rotection Time Screen Burn Pr otection O - The displayed image may diff er depending on the model.
Screen Burn Pr otection Pix el Shift Timer Immediate Display Side Gray O O - The displayed image may diff er depending on the model. Timer Y ou can set the timer for Screen Burn Prot ection . The Screen Burn Pr otection feature stops automatically after a specified period of time.
Screen Burn Pr otection Pix el Shift Timer Immediate Display Side Gray O O - The displayed image may diff er depending on the model. Immediate Display Select the screen saver you want to display immediat ely .
Menu T ranspar enc y MENU m → OnScreen Display → Menu T ransparency → ENTER E OnScreen Display Menu T ransparency Medium - The displayed image may diff er depending on the model.
Caption MENU m → OnScreen Display → Caption → ENTER E Caption Caption Caption Mode Digital Caption Options O Default - The displayed image may diff er depending on the model. Caption Y ou can switch the caption function on or off. If captions are not available, they will not be displayed on the scr een.
Caption Caption Caption Mode Digital Caption Options O Default - The displayed image may diff er depending on the model. Digital Caption Options (digital channels only) Configure the subtitle settings such as size and color . Adjusts the each option.
Reset OnScreen Display MENU m → OnScreen Display → Reset OnScreen Display → ENTER E OnScreen Display Reset OnScreen Display - The displayed image may diff er depending on the model. This option returns the current settings under OnScreen Display to the default factory settings.
Sound Adjustmen t Configure the sound ( Sound ) settings for the pr oduct. Sound Mode MENU m → Sound → Sound Mode → ENTER E Sound Sound Mode Sound Eect HDMI Sound Sound on Video C all Speaker Settings Auto V olume Reset Sound Standard A V(HDMI) Current Sour ce O - The displayed image may diff er depending on the model.
Sound Eect MENU m → Sound → Sound Effect → ENTER E Sound Eect Virtual Surround Dialog Clarity Equalizer O O - The displayed image may diff er depending on the model. Configure your pr eferred sound eff ect for output sound. ― If Speaker Settings is set to External , Sound Effect is disabled.
HDMI Sound MENU m → Sound → HDMI Sound → ENTER E Sound HDMI Sound A V(HDMI) - The displayed image may diff er depending on the model. Select whether to hear from A V(HDMI) or PC(DVI) .
Speaker Settings MENU m → Sound → Speaker Settings → ENTER E Sound Speaker Settings - The displayed image may diff er depending on the model. T V S ound Output If you are listening to the sound .
Reset Sound MENU m → Sound → Reset Sound → ENTER E Sound Reset Sound - The displayed image may diff er depending on the model. The displayed image may diff er depending on the model.
Channel Configure the Channel settings f or the product. Available in TV mode only. A uto P rog ram MENU m → Channel → Auto P rogram → ENTER E Channel Auto P rogr am Antenna Channel List Edit Channel Edit F avorites Audio Options Pr ogram Rating Lock Air On - The displayed image may diff er depending on the model.
Ant enna MENU m → Channel → Antenna → ENTER E Channel Antenna Air - The displayed image may diff er depending on the model. - Available in TV mode only. Before y our television can begin memorizing the available channels, you must specify the type of signal sour ce that is connected to the LED display .
Channel List MENU m → Channel → Channel List → ENTER E Channel Channel List - The displayed image may diff er depending on the model. - Available in TV mode only. Register or delete channels. A dd favorite channels or rename analog channels . Select a desired channel from Channel List to view the channel instantly .
Edit Channel MENU m → Channel → Edit Channel → ENTER E Channel Edit Channel - The displayed image may diff er depending on the model. - Available in TV mode only. Manage channels saved on your T V. Delete channels , re-register deleted channels or rename analog channels .
Editing regist ered channels Select Options from the edit channel page. The following functions are provided in the page. P rovided functions may var y depending on the broadcast signal . Option Name Operations Select All Select all channels in the Edit Channel page.
Edit F av orites MENU m → Channel → Edit F avorites → ENTER E Channel Edit F avorites - The displayed image may diff er depending on the model. - Available in TV mode only. Creating a fa vorit e channel list Set frequently viewed channels as favorite channels .
Vie wing channels saved under a fa vorite channel list ― F avorite channel lists are only displayed if they have been cr eated previously . When changing the channel using the channel buttons, channels sa ved in favorite channel lists can only be accessed.
Renaming a favorit e channel list Change the name of a favorite channel list, if requir ed. 1 Select Change F av . from the screen to change the favorite channel list on the right to another desired fa vorite channel list. 2 Select Options from the screen.
A udio Options MENU m → Channel → Audio Options → ENTER E Channel Pr eferred Language Multi- T rack Sound English Stereo - The displayed image may diff er depending on the model. - Available in TV mode only. Pr eferr ed Language (for digital br oadcasts) Use the up and down arrow keys to select a language, and then press E .
Pr ogram Rating Lock MENU m → Channel → Prog ram Rating Lock → ENTER E · · · · · Pr ogram Rating L ock Pr ogram Rating Lock On T V Rating Movie Rating (MP AA) Canadian English Rating Canadian F rench Rating Downloadable U .S. Rating - The displayed image may diff er depending on the model.
• Canadian English Rating : Y ou can block T V programs based on their Anglophone Canadian rating . Canadian English Rating displays a column with locks and the follo wing ratings categories.
Channel Settings MENU m → Channel → Channel Settings → ENTER E Channel Channel Settings - The displayed image may diff er depending on the model.
Network Network Sta tus MENU m → Network → Network Status → ENTER E Y ou can check the current network and I nternet status. Network Status Y our wireless network and Internet connection are setup and ready to use. Y ou are connected to the Internet.
Network Settings ( Wir ed) Connecting to a Wir ed Network There are thr ee ways to attach your pr oduct to your LAN using cable. • Y ou can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable.
Set the network connec tion to use Internet ser vices such as perform soft ware upgrades . Aut omatic Network Settings ( Wir ed) Connect to the network using a LAN cable. Make sure a LAN cable is connected first. How to set up automa tically 1 Set Network T ype to W ired from the Network Settings page.
Network Setting ( Wir eless) Connecting to a Wir eless Network The LAN Port on the W all Wireless IP sharer (router having DHCP server) LAN Cable Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video may not play smoothly .
6 When done, use the right arrow button to mo ve the cursor to Done , and then press E . The network connection screen appears and the verification process starts.
10 When done, select OK at the bottom of the page, and then press E . The network test screen appears and the verification process starts. 11 When the connection has been verified, the “ Y our wireless network and Internet c onnection are setup and ready to use .
T o use this function, your mobile device should be supported by the Wi-Fi Dir ect . W i-Fi Dir ec t MENU m → Network → W i-Fi Direct → ENTER E Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a rout er .
Screen Mirroring MENU m → Network → Screen Mirroring → ENTER E Connect a mobile device that suppor ts the mirroring function to the product. This allows the screen and sound from the mobile device to be outputted on the pr oduct. M irroring ref ers to outputting the screen and sound from a mobile device on a display device.
Device Name MENU m → Network → Device Name → ENTER E Select or enter a device name. This name can be shown on network remote controls o ver the network .
Sys te m Setup MENU m → Syst em → Setup → ENTER E System Setup T ouch Control Time Source Aut oSwitch Settings P ower C ontrol Eco Solution T emperature Contr ol 77 - The displayed image may diff er depending on the model.
6 Clock Set Set the current date and time, and then select Next . 7 Play via Select the appropriate player mode depending on the envir onment where you are using the pr oduct. ― The Play via setting step only appears when connected to the network. 8 Setup Complete Congr atulations! Setup is complete and you'r e ready to get started.
T ouch C ontrol MENU m → Syst em → T ouch Contr ol → ENTER E System T ouch Control - The displayed image may diff er depending on the model. Configure touch contr ol related f eatures. Admin Menu L ock Set the Admin Menu Lock to display the administrat or settings menu when you tap and hold the finger on the screen.
T ime MENU m → Syst em → Time → ENTER E Time Clock DST Sleep Timer P ower On Delay O O 0 sec - The displayed image may diff er depending on the model. Y ou can configure Clock Set or Sleep Timer . Y ou can also set the product to automatically turn on or off at a specified time using the Timer function.
Time Z one Select your time zone. ― This function is only available when the Clock Mode is set to Auto . Time Oset If the current time that has been automatically set is different fr om the actual time, adjust the hour between the inter val -12 hours and +12 hours.
DST Switches the DST (Daylight Saving Time) function on or off. Off / Aut o / Manual • Start Date : Set the star t date of Daylight Saving Time. • End Date : Set the end date of Daylight Saving Time. • Time Offset : Select the correct time offset your timezone.
T urning on the display with Source A utoSwitch On , and the pr evious video source selection is not active, the display will automatically search the diff erent video input sources f or active video. Source A utoSwitch Settings When the Source Aut oSwitch is On , the display video sour ce will automatically be searched f or active video.
P ow er C ontrol MENU m → Syst em → Pow er Contr ol → ENTER E P ow er Contr ol Auto P ower On PC Module Po wer Max. Po wer Saving Standby Con trol P ower Button Network Standby O On Auto P ower On Only O - The displayed image may diff er depending on the model.
Standby C ontrol Y ou can set the screen standby mode to be applied when an input signal is receiv ed. • Auto Po wer-saving mode will activate if no input signals ar e detected even though a source device is connected to the display . The message No Signal will appear if no source device is connected.
Ec o Solution MENU m → Syst em → Eco Solution → ENTER E Eco Solution Energy Saving Eco Sensor Screen Lamp Schedule No Signal P ower O Auto P ower O O O O O O - The displayed image may diff er depending on the model. Energy Saving Reduce the power consumption by adjusting the screen brightness.
No Signal P ower O Save power b y turning the device off when no signal is received from an y source. • Off / 15 min. / 30 min. / 60 min. ― Disabled when an attached PC is in power saving mode . ― The product will automatically power off at a specified time .
Device Manager MENU m → Syst em → Device Manager → ENTER E Device Manager Keyboard Settings Mouse Settings - The displayed image may diff er depending on the model. Configure options f or external input devices connec ted to the pr oduct. Keyboar d Settings Configure keyboard connection settings or options for a connected keyboard.
Mouse Settings Selec t Mouse Configure mouse connection settings or options for connected mouse devices. ― Among connected mouse devices, only one mouse can be used. Mouse Options ― Depending on the countr y . Primary Button Select a button on the mouse that will per form basic functions (click and enter).
Pla y via MENU m → Syst em → Play via → ENTER E System Play via MagicInfo - The displayed image may diff er depending on the model. Select the appropriate Play via mode depending on the envir onment where you are using the pr oduct. The home screen may be diff erent depending on the setting.
General MENU m → Syste m → General → ENTER E General Security BD Wise Anynet+ (HDMI-CEC) HDMI Hot Plug DivX ® Video On Demand Game Mode On On On O - The displayed image may diff er depending on the model. Security Safety Lock It sets safe lock function.
An ynet+ (HDMI-CEC ) An ynet+ (HDMI-CEC ) Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the An ynet+ feature .
Aut o T urn O ff Setting an Anynet+ Device to turn Off automatically when the product is turned off. • No / Ye s ― If Auto T urn O ff is set to Ye s , running external devices will turn off at the same time as the product powers off. ― May not be enabled depending on the device.
T roubleshooting for An ynet+ Pr oblem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • Check if the Anynet+ device power cor d is properly connected. • Check the Anynet+ device ’ s Video/A udio/HDMI cable connections.
Pr oblem Possible Solution The connected device is not displayed. • Check whether or not the device suppor ts Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the System menu.
HDMI Hot Plug This featur e is used to activate the time delay to turn on a DVI/HDMI source device. • Off / On DivX ® V ideo On Demand Shows the registration code authorized f or the product. If you connect to the DivX Ⓡ web site and register using that code , you can download the V OD reg istration file.
Reset Sy stem MENU m → Syste m → Reset System → ENTER E System Reset System - The displayed image may diff er depending on the model. This option returns the current settings under system to the default factory settings.
Suppor t Sof tware Updat e MENU m → Support → S oftware Update → ENTER E The Software Update menu lets you upgrade your pr oduct soft ware to the lat est version. ― Be careful not to turn off the power until the upgrade is complet e. The product will turn off and on automatically after completing the sof tware upgrade.
Go to Home to play a variety of content from a memory device or a connec ted network. Play er Search or play channels or content sav ed on devices. Schedule Create content schedules in local channels or edit sa ved channels. T emplate T o create content, select a template .
V ideo W all Customize the lay out of multiple displays that are connected to f orm a video wall. In addition, display par t of a whole picture or repeat the same picture on each of the connected multiple displays. T o display multiple images, ref er to MDC Help or the MagicInfo user guide.
Reset All MENU m → Support → Reset All → ENTER E Suppor t Reset All - The displayed image may diff er depending on the model. This option returns all the current settings for a displa y to the default factor y settings.
Pla ying photos , videos and music (Media Play) Play photos , videos or music saved on a storage device. Play a variety of content using the following methods . • Using a USB device: Play media content such as videos, phot os and music from a USB device.
Compa tible devices with media pla y • Some USB digital cameras, smartphones and audio devices may not be compatible with the product. • Media play is only compatible with USB MSC devices. • MSC device refers t o a Mass Storage Class Bulk-Only T ransport de vice.
Using a USB devic e Connecting a USB device 1 T urn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 The Play er page automatically appears as soon as a USB device connects to the product.
Playing media c onten t from a PC/mobile devic e Appro ving a PC/mobile device connection Play photos , videos or music saved on a PC or mobile device. T o play media content from a PC or mobile device on the product, the connection with the PC or mobile device must be approved .
When connected to a home network (DLNA ) Play content sav ed on a device connected to a home network . ― Playing media content using a non-Samsung DLNA server may result in a compatibility issue.
Menu items in the media cont ent list page Option Name Oper ations Photos V ideos Music Slide Show Start a slideshow. ― This menu item is not available if Sort by is set to F older . c Encoding Select an encoding language if the title of media content appears corrupted.
A vailable buttons and f eatur es during photo pla yback Pr essing the E or TOOLS butt on displays the following buttons . The RE TURN button makes the buttons disappear . • Pause / Play Start or stop a slideshow. Using a slideshow , it is possible to play all photos in a folder .
A vailable buttons and f eatur es during video playback Pr essing the E or TOOLS butt on displays the following buttons . The RE TURN button makes the buttons disappear . • Pause / Play P ause or play a video. The following f eatures are a vailable in pause mode.
A vailable buttons and f eatur es during music playback Pr essing the E or TOOLS butt on displays the following buttons . The RE TURN button makes the buttons disappear . • Pause / Play P ause or play music. • Rewind / F ast forward Rewind or fast forward music.
Suppor ted Subtitle and Media play le f ormats Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.sr t) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.
Suppor ted music le f ormats F ile Extension T ype C odec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek ( jump) func tion is not supported.
F ile Extension Con tainer Video C odec Resolution Fr ame rat e (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DivX 3.
T r oubleshooting G uide Requirements Bef ore C ontac ting Samsung Cust omer Ser vice C enter Before calling Samsung Cust omer Ser vice Center , test your product as follows. If the problem persists, contact Samsung Customer Service Center . T esting the Pr oduc t Check if your product is operating normally by using the product test function.
Check the follo wings. Installation issue (PC mode) The screen keeps swit ching on and o . Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are f ound on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC.
Screen issue The screen is not clear . The screen is blurry. Adjust Coarse and F ine . Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level . The screen appears unstable and shaky .
Screen issue The screen displa y does not look normal. Encoded video content may cause the display to appear corrupted in scenes f eaturing fast moving objects such as in a spor ts event or action video. Low sig nal level or low picture quality may cause the display to appear corrupted.
Sound issue The volume is t oo low . Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Video is a vailable but there is no sound. If an HDMI cable is connected, check the audio output settings on the PC.
Sound issue There is an echo sound c oming from the speakers. Different decoding speeds between the pr oduct speakers and ex ternal speakers can cause an echo. In this case, set Speaker Settings to External . Remote contr ol issue The remote c ontrol does not work.
Other issue Caption is gra yed out and not selectable. If the selected input source is not TV , Caption cannot be selected from the OnScreen Display menu. Caption can be enabled from a source device . The product smells like plastic. The plastic smell is normal and disappears over time.
Other issue There is no sound in HDMI mode . Displayed picture colors may not look normal. Video or sound may not be available. This can occur if a source device that only supports an older version of the HDMI standard is connected to the product. If these issues occur , connect an audio cable along with the HDMI cable.
Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to C ontrol P anel → Appearanc e and Themes → Display → Settings → Advanc ed → Monitor and adjust the frequency in Monitor Settings .
Question Answer How do I set pow ersaving mode? • Windows XP: Set pow er-saving mode in Con trol Panel → A ppearance and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power -saving mode in Contr ol Panel → Display → Screen Saver Settings or BIOS SETUP on the PC.
Specications 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name DM32D DM40D Panel Siz e 32 CLASS (31.5 inches / 80 cm) 40 CLASS (40.0 inches / 101 cm) Display area 698.4 mm (H) x 392.85 mm ( V ) / 27.5 inches (H) x 15.47 inches ( V ) 885.
Po wer Supply AC 100 to 240 V AC (+/- 10%), 60 / 50Hz ± 3Hz Refer to the label at the back of the product as the standard v oltage can var y in differ ent countries.
P ow erSav er The power-sa ving function of this product reduces power consumption by switching off the scr een and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode .
Pr eset Timing Modes ― This product can be set to only one resolution f or each screen size to obtain the optimum picture quality due to the natur e of the panel. Using a resolution other than the specified resolution may degrade the picture quality .
Resolution Horizontal F requency (kHz) V er tical Fr equency (Hz) Pix el Clock (MHz) Sync P olarit y (H/V ) VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.
Appendix Responsibility for the P ay Ser vice ( C ost to C ustomers) ― When the ser vice is requested , in spite of in warranty, w e may charge you f or a visit from a service technician in the following cases . Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
Optimum Picture Quality and Afterimage Burn-in Pr evention Optimum Picture Quality • Due to the nature of the manufacturing of this product, approximately 1 pix el per million (1ppm) may be brighter or darker on the panel. This does not affect product performance.
Pr eventing afterimage burn-in ― The best way to prot ect the product from afterimage burn-in is switching the power off or setting the PC or system to run a screen sa ver when not in use. Also , Warranty service may be limited depending on instruction guide.
License Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of D olby Laboratories. Ⓡ Manufactured under a license from U .S. Pat ent No ’ s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853.
T erminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above ref ers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progr essive), depending on the scanning method.
デバイスSamsung DM55Dの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung DM55Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung DM55Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung DM55Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung DM55Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung DM55Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung DM55Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung DM55Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung DM55Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。