SamsungメーカーDVD-V5600の使用説明書/サービス説明書
ページ先へ移動 of 56
User ’ s Manual DVD-V5600 DVD-V6600 PA L www .samsung.com/uk XEU ENG 1 27/02/2006 13:33 Page 1.
2 - English The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. DO NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%).
English - 3 Disc T ype and Characteristics Disc Markings • CD is recorded as a Digital Signal with better audio quality , less distor- tion and less deterioration of audio quality over time. • Video with CD sound, VHS quality & MPEG-1 compression technology .
4 - English Getting Started Getting Started Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Disc T ype and Characteristics . . . . . . . . . . . . . . . . . . . . . .3 Overviews . . . . . . . . . . . . . . . . . . . .
English - 5 Overviews Front View of the DVD-VCR (DVD-V5600) 1. DVD DECK. 2. OPEN/CLOSE BUTTON. 3. VIDEO CASSETE COMP ARTMENT . 4. EJECT BUTTON. 5. ST ANDBY/ON BUTTON. 6. AUX VIDEO INPUT JACK. 7. AUX AUDIO L/R INPUT JACK. 8. PROGRESSIVE SCAN MODE BUTTON.
6 - English 1. AUDIO L, R OUT JACKS. 2. AERIAL IN CONNECTOR. 3. A V2 (DEC./EXT .) IN/OUT SCAR T (EURO-21) JACK. 4. AUDIO L, R OUT JACKS (DVD only). 5. VIDEO OUT JACK. 6. OUT T O TV CONNECTOR. 7. A V1 (EURO A V) IN/OUT SCART . (EURO-21) JACK. 8. DIGIT AL AUDIO OUT JACKS (COAXIAL).
English - 7 Make sure that the following basic accessories are supplied with your DVD-VCR. Y ou must insert or replace the batteries in the remote control when you: • Purchase the DVD-VCR • Find t.
8 - English 1. DVD,VCR Used to operate DVD, VCR. 2. ST ANDBY/ON Used to turn the power on or off. 3. Number buttons 4. TIMER Used to activate the timer recording of a programme. 5. REC ( ● ) Used to make a recording on cassette. 6. SKIP ( / ) Use to skip a title, chapter or track.
English - 9 TV RF cable Aerial 5 TV RF cable Aerial 2 3 4 4 1 2 3 Connecting DVD-VCR to the TV using the RF Cable To receive television programmes a signal must be received from one of the following sources: • An outdoor aerial. • An indoor aerial.
10 - English Connecting DVD-VCR to the TV using the Audio/Video Cable Y ou can connect your DVD-VCR to the televi- sion using the audio/video cable if the appropri- ate input is available on the television. 1 Connect one end of the video cable into the VIDEO output jack on the rear of the DVD- VCR.
English - 11 Connecting DVD-VCR to the TV using the S-Video Cable (DVD only) Y ou will enjoy high quality images. S-Video seperates the picture element into black and white(Y) and colour(C) signals to present clearer images than regular video input mode.
12 - English AV Receiver Connections Digital Audio out Jack To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD-VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers.
English - 13 Connecting an Audio/Video Input Cable Y ou can connect other audio/video equipment to your DVD-VCR using audio/video cables if the appropriate outputs are available on the equip- ment chosen. Examples : • Y ou wish to copy a video cassette with the help of a second VCR.
5 The current time and date are displayed automatically . Check the Date and T ime if it is : • Incorrect, refer to “Setting the Date and T ime”.
English - 15 T uning Y our T elevision for the DVD- VCR Y our DVD-VCR contains a 24-hour clock and calendar used to: • Automatically stop programme recording. • Preset your DVD-VCR to record a programme automatically . Y ou must set the date and time when: • Y ou purchase the DVD-VCR.
16 - English Setting the Menu Language Presetting the Stations Automatically 1 Press the MENU button, then press the OK or button. 2 Press the OK or button again. The Language Set menu is displayed. 3 Press the or button to select desired language, then press the OK or button.
English - 17 Yo u do not need to preset the stations manually if you have already set them automatically . 1 Press the MENU button, then press the OK or button. 2 Press the or button to select Install , then press the OK or button. The Install menu is displayed.
18 - English If you have stored a TV station: • That you do not require • At the wrong programme position, you can cancel it. 1 Press the MENU button, then press the OK or button. 2 Press the or button to select Install , then press the OK or button.
English - 19 6 Press the or button to select required position, then press the OK button to swap the position. For example to move a TV station in programme 1 to programme 3.
20 - English Setting the VCR Output Channel Y our DVD-VCR output channel may need to be changed if the pictures suffer from interference or if your TV cannot find the pictures. 1 Press the MENU button, then press the OK or button. 2 Press the or button to select Install , then press the OK or button.
English - 21 Before recording or playing back a cassette, you can select the required system standard. Otherwise, the system automatically selects the reception standard when you select AUTO. • When playing back a cassette, the standard is automatically selected by the DVD-VCR.
22 - English Auto Power Off This feature automatically turns off your DVD- VCR if no signal is received and you do not press any button for the selected time. 1 Press the MENU button, press the OK or button. 2 Press the or button to select Auto Power Off .
English - 23 Screen Messages Y our DVD-VCR displays most information both the DVD-VCR and the television. Y ou can choose to display or hide this information on the television screen (If you configure the Screen Message to Off, the Fast Forward and Rewind messages will not be displayed on the screen.
24 - English Selecting the Recording Speed V ideo cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot record on the tape. 1 If you wish to protect a cassette, break off the tab using a small screwdriver .
English - 25 Recording from Another VCR or Camcorder Y ou can copy a cassette to your DVD-VCR from another video source, such as another VCR or a Camcorder etc. • It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright.
26 - English Using the Assemble Edit Function This function allows you to start a new recording at a specific position on the cassette while main- taining a very smooth scene change. 1 Insert the cassette to be edited in your DVD-VCR. 2 Press the ll button to start playback.
English - 27 9 When you have finished, press the OK button to set the T imer Programming. 10 Press the MENU button to exit the menu. 11 Press the ST ANDBY/ON button to activate the timer . Before starting recording, the DVD-VCR compares the timer duration with the remaining time on the cassette.
28 - English Cancelling a Preset Recording Y ou can cancel any programmes that are: • Incorrect • No longer required 1 Press the MENU button, then press the or button to select PROG . The T imer Method menu is displayed. 2 Press the OK or button.
English - 29 Y ou can select the mode in which the sound is reproduced on the loudspeakers and A V outputs. The following options are available. Press the AUDIO button on the remote control until the required option is displayed. Option Description L Used to listen to the sound on the left Hi-Fi channel.
30 - English Playing a Sequence Frame by Frame Searching for a Specific Sequence Y ou can vary the playback speed using the Shuttle function (up to nine times the normal speed). Example: Y ou wish to analyse a sports person’s technique, movement by movement.
English - 31 Index Skip Search This feature will enable you to fast forward/rewind to a specific point on a tape: e.g. If you have recorded 3 different programmes on a tape and you have rewound the tape to the beginning, by using this feature you can go directly to the start of programme 2 simply by pressing the SEARCH button.
32 - English The tape counter: • Indicates the elapsed time in the play and record modes (Hours, Minutes and Seconds). • Is reset when a cassette is inserted in the DVD-VCR. • Allows you to find the beginning of a sequence easily . • If the remaining time is to be calculated correctly , you must indicate the type of cassette being used.
English - 33 Setting Up the Language Features D D VD VD F F unctions unctions If you set disc menu, audio and subtitle lan- guage in advance, it will come up automatically every time you watch a movie. Using the Disc Menu Language 1 Press the MENU button in the stop mode.
34 - English Setting Up the Audio Options Dolby Digital Out • PCM : Converts to PCM (2CH) audio. Select PCM when using the Analog Audio Outputs. • Bitstream : Converts to Dolby Digital Bitstream (5.1CH).Select Bitstream when using the Digital Audio Output.
English - 35 DTS • Off : Doesn’t output digital signal. • On : Outputs DTS Bitstream via digital output only . Select DTS when connecting to a DTS Decoder . Dynamic Compression • On :T o select dynamic compression. • Off :T o select the standard range.
36 - English DVD Out • RGB : Sends RGB signal from the A V JACK (SCART terminal). • S-Video : Sends S-VIDEO signal from the AV JACK (S-Video terminal).
English - 37 37 - English DivX(R) Registration DivX, DivX Certified, and associated logos are trademarks of DivXNetworks, Inc and are used under license. 6 Press the or button to select the required level (e.g. Level 6 ). Press the OK or button.
38 - English Firmware Upgrade Please read the below information before update procedure. 1 The following events may interrupt the update procedure and may result in permanent damage to DVD-VCR . • Unplugging the power cord. • Power outage. • Dirt or Scratch in the discs.
English - 39 Special Playback Features During DVD/VCD/CD playback you can select from the following special playback options. To resume normal playback, press the ll but- ton. Still Press the ll button during playback. • The picture will still and the audio will mute.
40 - English Stop/Resume • Press the ■ button once to stop playback. To resume the DVD/VCD/CD from the point where the disc stopped, press the ll button. • Press the ■ button twice to completely stop playback. The next time you press the ll button, the disc will start over from the begin- ning.
English - 41 Adjusting the Aspect Ratio (EZ View) This function may be different depending on the type of disc. To play using aspect ratio (DVD) 1 Press the EZ VIEW button. • The screen size changes when the button is pressed repeatedly . • The screen zoom mode operates dif ferently depending on the screen setting in the initial DVD menu.
42 - English If you are using a 4:3 TV For 16:9 aspect ratio discs - 4:3 Letter Box Displays the content of the DVD title in 16:9 aspect ratio. The black bars will appear at the top and bottom of the screen. - 4:3 Pan Scan The left and right portions of the screen are cut off an the central portion of the 16:9 screen is displayed.
English - 43 Zoom 1 During playback, press the MENU button. Press the or button to select FUNC , then press the OK or button. The Function menu is displayed. 2 Press the button, then press the or button to select ZOOM. 3 Press the OK or button.
44 - English Marks Up to three Bookmarks can be inserted for a given DVD/VCD, allowing you to quickly jump to your favorite scene or song. 1 During playback, press the MARK button. 2 Press the ¥ or button to select one of the three mark placeholders (- - -).
English - 45 Cancel A-B Repeat 1 Press the REPEA T button to open the repeat menu. 2 Press the ¥ or button to selected Off , then press the OK button. • It is available to press the CLEAR button in order to stop repeat play . • When in VCD 2.
46 - English MP3/WMA Play If you insert an MP3/WMA Disc into the DVD-VCR, you can see the folder directory . MP3/WMA Play Function 1 Press the or button to select the desired music folder , then press the OK button. • Up to 7 music folders can be displayed at a time.
English - 47 If you insert a Picture (JPEG) CD Disc into the DVD-VCR, you can see the folder directory . 1 Press the or button to select the picture you want to view , then press the OK button. The selected picture is displayed. 2 Press the l ¥¥ or l button to display the previous or next picture.
48 - English • If no buttons on the remote control are pressed for 10 seconds, the menu bar will disappear . Press the DISC MENU button on the remote control to display the menu bar . Slide show Press the ¥ or button to select . Press the OK button.
English - 49 DivX/MPEG4 Playback 1 When the disc is inserted, the file structure of the disc will be shown. Depending on the file format, a different icon will appear next to each file. The and files will have been highlighted. Use or button to select the movie file, and then press OK or ll .
50 - English 5 Zoom During play , press the MENU button on the remote control. Then press the or button to select the FUNC , then press the OK or button. The Function menu is displayed. • Press the or button to select DVD Function .
English - 51 T echnical Specifications Rated voltage AC 220 - 240V , 50Hz Power consumption 19W atts W eight 3.9 Kg Size 430mm X 282mm X 82mm Operating ambient temperature +5°C ~ +40°C Installation conditions Operation position : Horizontal, Relative humidity : Below 75% V ideo input (Rear) Euro Scart socket : 1.
52 - English Before contacting the Samsung after-sales service, perform the following simple checks. If you are unable to solve the problem after reading the below instructions, note: • The model and serial number on the rear of your DVD-VCR. • The warranty information.
English - 53 T roubleshooting Guide (DVD) The icon appears on screen. Disc does not play . 5.1 channel sound is not being reproduced. Playback mode differs from the Setup menu selection. The screen ratio cannot be changed. No audio. Forgot password. If you experience other problems.
54 - English UNITED KINGDOM REPUBLIC OF IRELAND This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased.
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. North America Latin America Europe CIS Asia Pacific Middle East & Africa CANADA 1-800-SAMSUNG (7267864) www .
AK68-00954C Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
デバイスSamsung DVD-V5600の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung DVD-V5600をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung DVD-V5600の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung DVD-V5600の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung DVD-V5600で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung DVD-V5600を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung DVD-V5600の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung DVD-V5600に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung DVD-V5600デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
