SamsungメーカーHL-S5686Cの使用説明書/サービス説明書
ページ先へ移動 of 107
Owner’ s Instr uctions Register your product at www .samsung.com/global/register HL-S5686C DLP TV BP68-00620A-00 Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center .
English-2 A Guide to Digital TV © 2006 Samsung Electronics Co., Ltd. All rights reserved. • What is Digital T elevision? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set.
English-3 CableCARD and Digital Cable Ready TVs are the products of a new digital cable standard. This new standard is called OpenCable and it is a concerted effort to standardize the digital cable service network interface in North America. For more information, please refer to www .
English-4 1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OT A) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However , DTV broadcast channel assignments are different than analog channels.
Contents GENERAL INFORMA TION Vi ewing Position............................................................... 7 List of Features ................................................................ 8 Accessories...........................................
Contents USING THE OCAP (OPENCABLE APPLICA TION PLA TFORM) DA T A SER VIE Connecting CableCARD............................................. 78 Using the CableCARD................................................. 79 Using the CableCARD Setup Function .
V iewing Position To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible. General Information English-7 When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inches) for ventilation purposes.
English-8 List of Features Easy-to-operate remote control Dynamic, easy to navigate menus Easy-to-use on-screen menu system you can access from the front/right side panel, or remote contro.
English-9 V iewing the Control Panel SPEAKERS (POWER) Press to turn the TV on and of f. REMOTE CONTROL SENSOR Aim the remote control towards this spot on the TV . INDICA TOR LIGHTS SOURCE T oggles between all the available input sources (TV , A V1, A V2, A V3, S-Video1, S-Video2, S-Video3, Component1, Component2, HDMI1, HDMI2).
English-10 S-VIDEO (A V IN 3) S-Video input for external devices with an S-V ideo output. AUDIO-R/L / VIDEO (A V IN 3) V ideo and audio inputs for external devices. Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously , such as VCR or DVD players.
English-11 Remote Control Y ou can use the remote control up to a distance of about 23 feet from the TV . When using the remote, always point it directly a t the TV . Y ou can also use your remote control to operate your VCR, Cable box, DVD player , or Set-T op Box.
English-12 1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not supplied). Use a screwdriver to tighten the screws. 2. Plug the adaptor into the ANT 2 IN(AIR) or ANT 1 IN(CABLE) terminal on the back of the TV .
English-13 After you have made this connection, set the A/B Switch to the “A” position for normal viewing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B Switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.
English-14 Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructio ns on pages 12-13). Skip step 1 if you have not yet connected to an antenna or a cable system.
English-15 Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV . They allow you to view the camcorder tapes without using a VCR. 1. Connect a Video Cable (or S-video cable) between the A V IN 3 [VIDEO] (or S-VIDEO) jack on the TV and the VIDEO OUT jack on the camcorder .
English-16 Connecting a DVD Player/Set-T op Box via DVI This connection can only be made if there is a DVI Output connector on the external device. 1. Connect a DVI to HDMI cable or DVI-HDMI Adapter between the HDMI/DVI IN 1 or HDMI/DVI IN 2 connector on the TV and the DVI connector on the DVD player/Set-T op Box.
When “Internal mute” is set to “On”, Sound menus except “Multi-T rack Options” cannot be adjusted. English-17 Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV .
English-18 T urning the TV On and Off Press the POWER button on the remote control. Y ou can also use the (Power) button on the front of the panel. Plug & Play Feature When the TV is initially powered on, two basic settings proceed automatically and subsequently: 1 Press the POWER button on the remote control.
English-19 6 Press the ENTER button. Press the or buttons to select “Auto” or “Manual”, then the ENTER button. Switches the Daylight Saving T ime function on or off. 7 Press the ENTER button. Press the or buttons to select “On” or “Off”, then the ENTER button.
English-20 Dynamic Menus and On-Screen Displays The on-screen menu system allows you to control the settings of your TV . Access the on-screen menu system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the //// E N T E R buttons on your remote control to select menu items and make adjustments.
Navigating Menus by Using the Menu Map Using the Menu Map of the main menu enables you to select a function quickly . 1 Press the MENU button. The main menu will appear at the bottom of the screen. 2 Press the or button to select “Menu Map”, then press the ENTER button.
English-22 Selecting a Menu Language When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.
English-23 Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an air or cable system). Memorizing Channels Y our TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels.
English-24 4 Press the or button to select the Antenna connection, then press the ENTER button. When selecting Cable TV system: Press the ENTER button to start the auto program. By default, the cable TV system is set to “STD”. If you want to select another type of cable system, press the or button to select “STD”, “HRC” or “IRC”.
English-25 For example, for channel 7-1, press “7”, then “ - ”, then “1”. HD indicates the TV is receiving a Digital High Definition signal.
English-26 Setting Up the Remote to Operate Y our VCR 1. T urn off your VCR. 2. Press the VCR button on your TV’ s remote control. 3. Press the SET button on your TV’ s remote control. 4. Using the number buttons on your remote control, enter three digits of the VCR code listed on page 28 of this manual for your brand of VCR.
English-27 Setting Up the Remote to Operate Y our DVD 1. T urn off your DVD. 2. Press the DVD button on your TV’ s remote control. 3. Press the SET button on your TV’ s remote control. 4. Using the number buttons on your remote control, enter three digits of the DVD code listed on pages 29~30 of this manual for your brand of DVD.
English-28 Brand SAMSUNG ADMIRAL AIWA AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MA THES DAEWOO DB DIMENSIA DYNA TECH ELECTROHOME EMERSON FISHER FUNAI GE.
English-29 Brand ANAM AUDIOVOX AUDIOLOGIC ANABA APEX DIGIT AL AIWA BROKSONIC BLAUPUNKT B&K CURTIS MA THES CYBER HOME CLARION CIRRUS CYBER HOME CINEVISION DAEWOO DENON F ARENHEIT FISHER GPX GO VIDE.
English-30 Brand ALPHAST AR ANAM CHANNEL MASTER CROSSDIGIT AL CHAP ARRAL DIRECT TV DAEWOO DISH NETWORK SYSTEM DISHPRO DRAKE DX ANTENNA ECHOST AR EXPRESSVU GOI GE GENERAL INSTRUMENT HTS HOME CABLE HIT .
English-31 Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV . Also, you can check the time while watching the TV . (Just press the INFO button.) 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.
English-32 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Clock”, then press the ENTER button. The Clock can be set automatically if you are receiving a digital signal.
English-33 Setting the On/Off T imer 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Timer”, then press the ENTER button. Press the or button to select “On T imer”, then press the ENTER button.
English-34 The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes). 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Timer”, then press the ENTER button.
Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-T op Box or the TV source (air or cable). V iewing an External Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”.
English-36 This feature enables you to name the input source you have connected. Assigning Names to External Input Mode 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the or button to select “Edit Name”, then press the ENTER button.
Selecting Y our Favorite Channels Y ou can store your favorite channels for each available input source (such as TV and CA TV). Preset : T o use the Channel Manager function, first run Auto Program (see pages 23~24). Channel Control 1 Press the MENU button.
English-38 Channel Enter Channel Antenna Auto Program Channel Manager Fine T une Signal Strength LNA Air On Return Channel Enter Channel Manager All Added Favorite Default List Mode All Return Y ou can display a list of all channels, added channels, or your favorite channels.
Adding and Erasing Channels Preset : T o use the Channel Manager function, first run Auto Program (See pages 23~24). 1 Press the MENU button. Press the or button to select “Channel”, then press the ENTER button. 2 Press the or button to select “Channel Manager”, then press the ENTER button.
English-40 Labeling the Channels Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, and etc.) A label consists of five fields, where each field is a letter , a number or a blank.
Fine T uning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the or button to select “Channel”, then press the ENTER button. 2 Press the or button to select “Fine T une”, then press the ENTER button.
English-42 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear , digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.
Picture Contr ol Yo u can select the type of picture which best corresponds to your viewing requirements. Picture Contr ol 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “Mode”, then press the ENTER button.
English-44 Customizing the Picture Settings Y ou can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, “T int”, and “Color T one” according to personal preference. Y ou can select “Standard” which automatically recalls your personalized picture settings.
5 Press the ENTER button to return to “Mode”. Press the or button to select “Color T one”, then press the ENTER button. 6 Press the or button to select a particular option (Cool2, Cool1, Normal, W arm1, or Warm2), then press the ENTER button. 7 To return the factory defaults, select “Reset” by pressing the or button.
English-46 Changing the Picture Size Yo u can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. Press the or button to select “Size”, then press the ENTER button.
Setting the My Color Contr ol Mode My Color Control allows you to adjust colors according to your preference, by adjusting skin, sky , and grass tones using the pr edefined settings (Blue, Green, Pink, Standard, and Custom) without affecting other colors on the screen.
English-48 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “My Color Control”, then press the ENTER button. 4 Press the or button to select the desired color and then press the ENTER or button.
English-49 Using the Color W eakness Enhancement Feature This feature adjusts the Red, Green or Blue color to compensate for the user ’ s particular color weakness. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.
English-50 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button.
English-51 DNIe (Digital Natural Image engine) This TV includes the DNIe function to provide high visual quality . If you set DNIe to on, you can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for demonstrat ion purposes.
English-52 Setting the Film Mode Y ou can automatically sense and process film signals from all sources and adjust the picture for optimum quality . 1 Press the MENU button. Press the or button to select “Picture”, then press the ENTER button. 2 Press the or button to select “Film Mode”, then press the ENTER button.
English-53 Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.
English-54 Sound Control Y ou can control and customize the sound levels and settings of the TV with the remote control. 1 Press the MENU button. Press the or button to select “Sound”, then press the ENTER button. Adjusting the V olume Press the VOL+ or VOL – button to increase or decrease the volume.
English-55 1 Press the MENU button. Press the or button to select “Sound”, then press the ENTER button. 2 Press the or button to select “Mode”, then press the ENTER button. Press the or button again to select “Mode”, then press the ENTER button.
English-56 Setting up DNSe (Digital Natural Sound engine) DNSe enhances the sound quality , automatically controls output, and prevents sound distortion. 1 Press the MENU button. Press the or button to select “Sound”, then press the ENTER button. 2 Press the or button to select “DNSe”, then press the ENTER button.
English-57 Auto V olume Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed.
English-58 Choosing a Multi-Channel Sound (MTS) track The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program.
English-59 Choosing a Multi-Channel Sound (MTS) track Depending on the particular program being broadcast, you can listen to Stereo, SAP , or Mono. 1 Press the MENU button. Press the or button to select “Sound”, then press the ENTER button. 2 Press the or button to select “Multi-Track Options”, then press the ENTER button.
English-60 Selecting the Internal Mute When using a device such as a Home Theater or Amplifier with external speakers, you can set Internal Mute to On to cut off sound from the TV's internal speakers. 1 Press the MENU button. Press the or button to select “Sound”, then press the ENTER button.
Setting the On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. 1 Press the MENU button. Press the or button to select “Sound”, then press the ENTER button. 2 Press the or button to select “Melody”, then press the ENTER button.
English-62 Setting the Function Help Displays Help on the menu functions. The Help appears at the top of the screen. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Function Help”, then press the ENTER button.
English-63 Setting the Data Service It is used to decide whether or not to use the Data Service. When it is set to “Of f”, all the functions relating to Data Applic ation are disabled. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.
Menu T ransparency Level Adjusts the transparency of the menu screen. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Menu T ransparency”, then press the ENTER button.
English-65 When connecting to a game console such as PlayStation TM or Xbox TM , you can enjoy a more realistic gaming experience by setting the Game Mode to on. Using Game Mode 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.
Using the V -Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen menu will instruct you to assign a password (you can change it later , if necessary). 1 Press the MENU button.
English-67 How to Enable/Disable the Rating Controls 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. Press the or button to select “V -Chip”, then press the ENTER button. 2 Press the button. Press the number buttons to enter your current 4-digit PIN.
How to Set up Restrictions Using “TV Par ental Guidelines” The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines” or “MP AA Rating”. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button.
English-69 How to Set up Restrictions Using “MP AA Rating” The Movie rating system uses the “MP AA” (Motion Picture Association of America) system, and its main application is for movies.
Important Notes About Parental Locks Explanation of the MP AA and TV (FCC) Rating Systems: TV (FCC) Age-Based Ratings TV -Y All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two to six.
English-71 How to Set up Restrictions Using Canadian English 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. Press the or button to select “V -Chip”, then press the ENTER button. 2 Press the button.
How to Set up Restrictions Using Canadian French 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. Press the or button to select “V -Chip”, then press the ENTER button. 2 Press the button. Press the number buttons to enter your current 4-digit PIN.
English-73 Using the V -Chip for Digital channels 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. Press the or button to select “V -Chip”, then press the ENTER button. 2 Press the button. Press the number buttons to enter your current 4-digit PIN.
V iewing Closed Captions (On-Screen T ext Messages) 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Caption”, then press the ENTER button. 3 Press the or button to select “Caption”, then press the ENTER button.
English-75 Setup Enter Caption Caption Caption Mode Digital Caption Options Return Off On Setup Enter Setup Language Clock T imer Game Mode V -Chip Caption Menu T ransparency Blue Screen † Color Wea.
6 Press the or button to select “Size”, then press the ENTER button. Press the or button to select the desired item in the Size menu, then press the ENTER button. Set other listed options below using the same method as above. Select “Return” by pressing the or button, then press the ENTER button to return to the previous menu.
1 Press the MENU button. Press the or button to select “Application”, then press the ENTER button. 3 Press the EXIT button to close the License application. 2 Press the or button to select “License”, then press the ENTER button. • It displays the information about the Software Platform License of the TV .
English-78 Using the OCAP (OpenCable Application Platform) Data Service TV Rear Panel Please insert the card as shown. Y ou must obtain a CableCARD from a local cable service provider . Connecting CableCARD 1. Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the back of the TV .
English-79 Using the CableCARD 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “CableCARD TM ”, then press the ENTER button. Select “Return” by pressing the or button, then press the ENTER button to return to the previous menu.
English-80 Channel List Reorganization 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “CableCARD Setup”, then press the ENTER button. 3 Press the or button to select “Channel List Reorganization”, then press the ENTER button.
English-81 1 Press the MENU button. Press the or button to select “Application”, then press the ENTER button. 3 Press the or button to select a Data Application to run. 2 Press the or button to select “Data Service”, then press the ENTER button.
English-82 What’ s D-Net? 1 Connect the IEEE1394 Cable from the jack of the component with IEEE1394 capability , such as a Set-T op Box or a Digital VCR to the D-NET (IEEE1394) S400MPEG jack on the TV . 3 Select the D-Net (IEEE1394) Compatible device.
English-83 When Connecting D-Net (IEEE1394) Compatible devices The last device in the chain should not be looped back to the TV as the TV may not be able to work with the other devices. To connect two or more D-Net (IEEE1394) Compatible devices, follow the diagram below .
English-84 Connection Options There are two different connection options for connecting D -Net (IEEE1394) compatible devices. Select the most suitable option according to your network of audio/video products.
English-85 4-Pin and 6-Pin Connectors T wo different types of connectors are used for IEEE1394 terminals and cables, a 4-pin and a 6-pin. The 4-pin connector sends digital audio, digital video and digital control signals to and from devices. The TV has two available 4-pin connection jacks, of which two are at the back.
English-86 Selecting a D-Net device Prior to viewing an IEEE1394 device, it first needs to be selected in the D-Net Device List. 1 Connect the relevant D-Net (IEEE1394) Compatible device in the list. (See “How to connect compatible IEEE1394 Devices” on page 82) 3 Select a connected D-Net device by pressing the or button.
English-87 1 Press the MENU button. Press the or button to select “Application”, then press the ENTER button. 3 Press the or button to select a D-Net (IEEE1394) connected device. 2 Press the or button to select “D-Net”, then press the ENTER button.
English-88 The D-Net control panel Select an IEEE1394 device from the D-Net device list. The TV will then display the D-Net control panel. This panel allows you to use the TV remote control to control the selected IEEE1394 device. 1 Press the D-Net button on the remote control.
English-89 Control Panel ( ) Button Name T o do this Return T arget File List Display the A V-HDD file list. Move to the D-Net device list. Shows a list of recording devices. Play Stop Play the digital stream from the selected digital device. Stop the digital stream from the selected digital device.
English-90 Control Panel Images for Each Device DTV Control Panel Image Cable STB Control Panel Image AV -HDD Control Panel Image When the Power is off. AV -HDD Control Panel Image When the Power changes. AV -HDD Control Panel Image When Playing. AV -HDD Control Panel Image When Recording.
Operating Tips 1) When the screen is switched to the TV program. - When you select the first button, the DTV button, in the Device List, it switches to the TV program.
English-92 10) When multiple devices are connected, some devices may appear and then disappear periodically in the Device List. Because some devices malfunction when multiple devices are connected. If this occurs, you have to discover and remove the defective device from the connection by removing the devices one by one.
Recording Tips In this case, the selected file is automatically played and displayed on the TV screen and the target device automatically starts recording. Controlling a device with another device's remote control or through manual operation, may cause a malfunction when controlling a device through the TV .
English-94 T ips on stopping r ecording 1 In general, you can instantly evaluate the current recording device through the T arget List. If you select a device that you wish to stop, a message appears asking if you really want to stop recording. 2 For D-VHS.
English-95 File List 1 Press the D-Net button on the remote control. 3 Press the or button to move to the File List button and then press the ENTER or button. The Control Panel disappears and the file list appears which allows you to identify a current recording or playing device.
English-96 6 To move to the list on the next page, move the cursor to the file at the bottom and press the button; to move to the previous page, move the cursor to the Previous Menu and press the button. When pressing the button while the first file on the first page is selected, the cursor moves to the last file on the last page.
Tr oubleshooting (D-Net) Possible Solution Only DTVs, STBs, A V-HDDs, D-VHSs and MPEG camcorder IEEE 1394 devices are controllable. Other devices will display “UNKNOWN” in the device list. Some supported devices may display as “UNKNOWN” due to an initialization error .
English-98 Possible Solution This message appears when the connection speed of the connected device and the device selected from the T arget List are different when copying data.
Possible Solution Check if the current mode for DTV and STB is set to analog by mistake. For A V-HDD, check if the played content has reached the end. (Select the item from the content list again.) For D-VHS, check if a D-VHS tape is being used. If the camcorder supports the DV format, no picture will be displayed on the screen.
English-100 Possible Solution This message appears if you have connected a 1394 device or equipment other than a supported device (D-VHS, DTV , STB, A V-HDD, Camcorder), or if the connected device does not support the A VC defined in the 1394 specifications, even if the device is a supported device, when you have selected the device to use it.
English-101 Replacing the Lamp Appendix • Why do I need to replace the lamp? The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically . After replacing the lamp, the screen quality will be bright and clear as new .
English-102 • For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves. 1 Unplug TV , then use a screwdriver to remove the screws. 2 Remove the Lamp cover . 4 Remove the screw securing the Lamp by using a screwdriver . 3 Remove the Lamp cover duct holding the tab and pulling it out.
English-103 Identifying Problems If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply , call your nearest Samsung service center. Problem Poor picture quality . Poor sound quality .
English-104 • Do not put the TV near extremely hot, cold, humid or dusty places. • Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners. • Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or paper .
English-105 Design and specifications are subject to change without prior notice. Specifications Model Name Dimensions (WxDxH) Weight TV System Channel Component Video IN HDMI IN Speaker Output V oltage Frequency of Operation Power Consumption HL-S5686C 50.
This page is intentionally left blank. BP68-00620A-00Eng 9/14/06 5:28 PM Page 106.
This page is intentionally left blank. BP68-00620A-00Eng 9/14/06 5:28 PM Page 107.
デバイスSamsung HL-S5686Cの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung HL-S5686Cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung HL-S5686Cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung HL-S5686Cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung HL-S5686Cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung HL-S5686Cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung HL-S5686Cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung HL-S5686Cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung HL-S5686Cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。