SamsungメーカーHP-P5091の使用説明書/サービス説明書
ページ先へ移動 of 84
Owner ’ s Instructions HP-P5091 with WIRELESS HOME A V CENTER.
Impor tant W arranty Information Regarding T elevision Format V iewing W ide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video.
3 User Instructions This product is restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operations. Screen Image retention Do not display a still image (.
T able of Contents General Information Y our New Plasma Display Panel ......................6 WIRELESS A V RECEIVER ................................8 Y our WIRELESS HOME A V CENTER ................9 Remote Control Buttons .............................
PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER General Information Y our New Plasma Display Panel ......................................................6 WIRELESS A V RECEIVER ..................................................................8 Y our WIRELESS HOME A V CENTER .
6 Y our New Plasma Display Panel Front Panel 7 8 Œ SOURCE button Press to toggle between all the external input sources (ie., Component, A V1, A V2, and S-Video). ´ MENU button Displays the main on-screen menu. ˇ VOL(+, -) buttons Press to increase or decrease the volume.
7 Rear Panel Checking Accessories Remote Control/ AAA Batteries (MD59-00355A) Antenna Cable (BN39-00333A) Wir eless signal cable (MD39-00108A) Power Cord (3903-000085) Owner’ s Instructions Ferrite Cores : 2EA (3301-001201) Once you have unpacked your PDP with WIRELESS HOME A V CENTER, check to make sure that you have all the parts shown here.
8 WIRELESS A V RECEIVER 1. ONL Y FOR SERVICE For Service only 2. A V SIGNAL JACK Connect to the WIRELESS SIGNAL INPUT Port on the rear of the PDP ..
9 Y our WIRELESS HOME A V CENTER Front Panel Œ POWER Press to turn the power on or off. Power On : GREEN Power Off : RED ´ Wireless LED This LED will light green when Wireless communication is successful. ˇ DTV(LED) This LED will light green when the DTV signal is recognized.
10 Rear Panel Œ AIR (75 Ω ) The cable from an off-air TV antenna (not from a satellite dish) connects to this jack. Both standard analog (NTSC) and high definition digital (A TSC) program broadcasts can be received through a single antenna connected to this jack.
11 Remote Contr ol Buttons Remote Control Œ POWER ON button Tu r ns the PDP and WIRELESS HOME A V CENTER on. ´ ANTENNA button Alternates the input between Air and Cable. ˇ Number buttons Select the channel directly . ¨ +100 button Selects channels over 100.
12 ◊ AUTO PROG. button Automatically cycles through all of the available channels and stores them in memor y . ± ADD/DEL button Adds or deletes channels in the TV’ s memor y . ≠ DNIe button Activates DNIe (Digital Natural Image engine). – SLEEP button Selects a preset time inter val for automatic shutoff.
PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Connections Connecting the PDP to the WIRELESS HOME A V CENTER ................14 Connecting VHF and UHF Antennas ..............................................15 Connecting Cable TV ...............
14 Connecting the PDP to the WIRELESS HOME A V CENTER 1 Make sure your PDP , A/V receiver and WIRELESS HOME AV CENTER are turned off and unplugged. 2 Install the WIRELESS HOME A V RECEIVER onto the bracket located at the top of the PDP’ s rear panel, in the direction of the arrow (as illustrated).
15 Connecting VHF and UHF Antennas Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. 1 Plug the antenna lead into the AIR terminal on the WIRELESS HOME A V CENTER. Use the antenna cable included in the product package.
16 Connecting Cable TV Y ou can connect different cable systems to your WIRELESS HOME A V CENTER, including cable without a Cable box, and cable with a Cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable into the cable terminal on the WIRELESS HOME A V CENTER.
17 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack Connect the Video/Audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks to the WIRELESS HOME A V CENTER and VIDEO or S-VIDEO / L - AUDIO - R output jacks on the VCR. (Note: For better video, use an S-Video cable.
18 Connecting a Camcorder WIRELESS HOME A V CENTER Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks to the WIRELESS HOME A V CENTER and the VIDEO or S-VIDEO / AUDIO output jacks on the camcorder . (Note: For better video, use an S-VIDEO cable.
Playing DVD Audio cable Component cable Connect the Y , P b , P r (COMPONENT) input jacks on the WIRELESS HOME A V CENTER to the Y , P b , P r output jacks on the DVD player using a component cable. Connect the AUDIO L/R(COMPONENT) input jacks on the WIRELESS HOME A V CENTER to the AUDIO output jacks on the DVD player using an audio cable.
20 Connecting a DTV Receiver (480i, 480p) Note: WIRELESS HOME A V CENTER does not take 720p and 1080i. W atching DTV Component cable Audio cable Connect the cable or antenna to the antenna input jack on the DTV receiver .
21 Connecting a Digital Audio System There are many types of digital audio systems on the market today . A simplified illustration of an audio system is shown below .
22 Connecting to a second TV WIRELESS HOME A V CENTER TV V ideo cable Audio cable Connect the Video/Audio cables between TV out / L - AUDIO - R jacks on the WIRELESS HOME AV CENTER to VIDEO / L - AUDIO - R input jacks on the second TV . Notes • Please be sure to match the color coded input terminals and cable jacks.
23 Connecting Speakers External speakers are sold separately . Check with your dealer . Connect the speaker audio cable to the external speaker output jack on the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP .
24 Installing the Speakers This speaker installation guide is for the PSN5042 speakers. Parts How to Attach the Speakers when using the Stand 2EA 2EA 1EA Speakers 1EA Middle Cabinet (W all Mount Only).
25 Screw ② 2 Set the speaker guide bracket into the square grooves located on either side of the PDP’ s bottom rear , then push the speaker guide bracket towards the center (as the arrow illustrates). Secure the speaker guide bracket with provided screws @ .
26 How to Attach the Speakers when using the W all Mount 1 Remove the screws indicated on the rear of the PDP (6 screws on the left and right sides, 2 screws on the center).
27 3 Secure the speaker dust cover by setting it into the grooves located on the front side of the speakers. 4 Connect the speakers to the PDP using the speaker cables. The connection terminals are on the rear side of both the PDP and the speakers. (Match the color coded terminals and cables.
28 1 Firmly secure the pegs to the both sides of the stand base using 8 screws provided. How to assemble and attach the Stand-Base This guide is for the SMN5040 stand. 2 Using the 4 screws for securing the stand pegs and the monitor , fir mly attach the monitor to the stand pegs.
29 W all Installation Instructions 1 Do not install the PDP in any location other than a vertical wall. 2 To protect the perfor mance of the PDP and prevent problems, avoid the following locations : • Next to smoke and fire detectors. • Areas subject to vibration.
30 1 The wall mount comes packaged in 3 parts. These par ts must be assembled together . Please tighten the captive screws(4EA) in the direction of the arrow after assembling the bracket. Install the W all Mount Bracket after the screws are securely inserted into the wall.
1 Remove the screws on the rear of the PDP panel. 2 Connect insulation holders to screws (see the illustration below). • If you are uncertain about installation, hire an Installation Specialist to install the wall mount bracket.
32 1. Contact an authorized technician when installing the wall attachment panel. 2. After hanging the PDP panel on the wall attachment panel, make sure that the Insulation holders are secure. 3. Be careful not to get your fingers caught during installation.
PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Operation Tu r ning the PDP On and Off ..........................................................34 Memorizing the Channels..............................................................35 Using the On-Screen Help .
34 Tu rning the PDP On and Off Press the POWER ON button on the remote control. The PDP will be turned on and you will be ready to use its features. Y ou can also use the POWER ( ) button on the front of the PDP . Y ou can use the POWER ON button to turn on the WIRELESS HOME A V CENTER.
35 Memorizing the Channels Y our PDP can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits.
36 Storing Channels in Memor y (Automatic Method) 1 First, select the correct antenna (Air and Cable). See steps on previous page. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button.
37 Adding and Deleting Channels (Manual Method) 1 Use the number buttons to directly select the channel that will be added or deleted. Ex) Channel “11” 2 Press the ADD/DEL button, then press the ENTER button. Repeatedly pressing this button will alternate between “Add” and “Delete”.
38 Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH button, the PDP changes channels in sequence. Y ou will see all the channels that the PDP has memorized. (The PDP must have memorized at least three channels.
39 Adjusting the V olume Using the V olume Buttons Press the VOL or VOL button to increase or decrease the volume. Using Mute Using the MUTE Button At any time, you can temporarily cut off the sound using the MUTE button. 1 Press the MUTE button and the sound cuts off.
40 To turn the on-screen help on : 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Function Help”, then press the ENTER button. The on-screen help appears.
41 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ENTER button. The Favorite Channels option is displayed. 3 Press the ▲ or ▼ button to select the channel you want to designate as a “Favorite Channel” and press the ENTER button.
42 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Fine T une”, then press the ENTER button. 3 Press the œ or √ button to adjust the fine tuning.
Time TV Move Enter Return Select the time zone in which you live 43 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ENTER button.
44 1 Press the MENU button on the remote control. 2 Use the ▲ or ▼ button to select “Channel”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Signal Strength”, then press the ENTER button. The “Signal Strength” meter will be displayed.
45 Setting Up your Remote Contr ol This PDP's remote control can operate almost any VCR, Cable box or DVD. After it has been set up properly , your remote control can operate in four different modes : TV , VCR, CA TV , or DVD.
46 Remote Control Codes VCR Codes Cable Box Codes DVD Codes Admiral 020 Aiwa 025 Akai 027, 004, 032 Audio Dynamics 007, 026 Bell&Howell 018 Broksonic 022 Candle 002, 006, 003, 015, 008, 055 Canon .
PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Picture Contr ol Customizing the Picture ................................................................48 Using Automatic Picture Settings ....................................................49 Selecting the Color T one .
48 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
49 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. ➤ ➤ Quick way to access the picture setting: Just press the “P .MODE” button on the remote control. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button.
50 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
51 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. ➤ ➤ Quick way to select DNIe: Simply press the “DNIe” button under the cover of the remote control. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button.
52 Changing the Picture Size 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Picture Size”, then press the ENTER button. 3 Press the œ or √ button to select the Picture Size you want, then press the ENTER button.
53 Notes • In TV , VIDEO, S-VIDEO, and Component (480i, 480p) modes, all screen modes can be selected. (16:9 ➞ 4:3 ➞ Panorama ➞ Zoom1 ➞ Zoom2). • 16:9(Wide) and 4:3(Normal) Aspect ratios are available for HDTV broadcasts. 16:9 (W 16:9 (W ide) ide) Sets the picture to 16:9 wide mode.
.
PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Sound Contr ol Using an Automatic Sound Settings ................................................56 Choosing a Digital Sound Format (Dolby Digital or PCM) ..................57 Choosing a Multi-T rack Language .
56 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. ➤ ➤ Quick way to access the Sound Mode menu : Just press the “S.MODE” button on the remote control. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button.
57 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Sound IN/OUT”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Digital Input” or “Digital Output”, then press the ENTER button.
58 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Multi-T rack Options”, then press the ENTER button. 3 Press the ENTER button to select the “Multi-T rack Language”.
59 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. ➤ ➤ Quick way to access the MTS menu: Just press the “MTS” button on the remote control. 2 Press the ▲ or ▼ button to select “Multi-T rack Options”, then press the ENTER button.
60 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Sound”, then press the ENTER button.
61 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. ➤ ➤ Quick way to access the T ruSurround XT menu: Just press the “SRS TSXT” button on the remote control. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button.
62 1 Press the MENU button.Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Dynamic Range”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “On” or “Off”, then press the ENTER button.
PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Function Description Selecting the Fan ..........................................................................64 V iewing Closed Captions .........................................................
64 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Display Picture/ Sound Menu”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Function”, then press the ENTER button.
65 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 3 Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to turn closed captions “On” or “Off”, then press the ENTER button.
66 How to Activate or Deactivate the On-screen Captions 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 3 Press the ENTER button to select “Caption”.
67 5 Press the ▲ or ▼ button to select “Caption Options”, then press the ENTER button. 6 Select the option (Size, Style, Foreground Color , Background Color , Foreground Opacity , Background Opacity , or Return to Default) you want using the ▲ or ▼ button.
68 Setting Up Y our Personal ID Number (PIN) 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear .
69 How to Enable/Disable the V -Chip 1 Press the MENU button. Press the ▲ or ▼ button to select “Preference”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear .
70 How to Set up Restrictions using the “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating.
71 5 At this point, one of the TV -Ratings is selected. Press the ENTER button. Depending on your existing setup, a symbol will be selected. (Blank = Unblocked, = Blocked) While “ ” is selected, press the ENTER button to block or unblock the categor y .
72 How to Set up Restrictions using the MP AA Ratings: G, PG, PG-13, R, NC-17, X, NR The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies.
73 How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V -Chip will block it. The screen will go blank and the following message will appear: 1 Press the ENTER button. 2 Enter your PIN number .
74 Y our WIRELESS HOME A V CENTER has an Electronic Program Guide (EPG) to help you navigate through all the possible viewing options. The EPG supplies information, such as program lists, start and end times of all available channels. In addition, the detailed information about the program is often available in the EPG.
75 1 Press the MENU button. Press the ▲ or ▼ button to select “Guide”, then press the ENTER button. 2 Press the ▲ or ▼ button to select the “Default Guide”, then press the ENTER button. 3 Press the ▲ or ▼ button to alternate between “Mini Guide” and “Full Guide” and press the ENTER button.
.
PLASMA DISPLA Y P ANEL with WIRELESS HOME A V CENTER Appendix Tr oubleshooting ............................................................................78 Care and Maintenance ................................................................81 Specifications .
78 Tr oubleshooting If the TV seems to have a problem, first tr y this list of possible problems and solutions. If none of these troubleshooting tips apply , then call your nearest ser vice center . WIRELESS HOME A V CENTER Problem Possible Solution Poor picture quality Tr y another channel.
79 PDP (Continued) Problem Possible Solution PDP set is turned on and the message “No Wireless Signal or Please Check WIRELESS HOME A V CENTER Power” appears. Cause 1: The WIRELESS HOME A V CENTER is turned off. Cause 2: The message still appears despite the A V Center is on.
80 PDP (Continued) Problem Possible Solution There is no signal in a digital chan- nel, and messages “Searching for Signals” followed by “No Signal” appear . Cause: Channels have been stored using Auto Memorize but the broadcasting companies are not sending the corresponding signals.
81 W ith proper care, your PDP with WIRELESS HOME A V CENTER will give you many years of ser vice. Please follow these guidelines to get the maximum perfor mance from your PDP with WIRELESS HOME A V CENTER. Caution • Do not put the PDP with WIRELESS HOME A V CENTER near extremely hot, cold, humid, or dusty places.
82 Specifications HP-P5091(PDP) 1257 (W) x 84 (D) x 740 (H) mm ; 49.49 (W) x 3.31 (D) x 29.13 (H) inches 54 (W) x 31.5 (D) x 220 (H) mm ; 2.13 x 1.24 x 8.66 inches 36 kg ; 79.41 lbs 150g (including batteries) ; 0.33 lbs 120V~, 60Hz 490 W atts 1366(H) x 768(V) ; 14.
83 Memo.
BN68-00629A-00 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 V alley Road, Suite 201 Mount Arlington, NJ 07856 www .samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Car e 7037 Financial Drive Mississauga, Ontario L5N 6R3 www .
デバイスSamsung HP-P5091の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung HP-P5091をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung HP-P5091の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung HP-P5091の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung HP-P5091で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung HP-P5091を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung HP-P5091の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung HP-P5091に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung HP-P5091デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
