SamsungメーカーHT-DS665Tの使用説明書/サービス説明書
ページ先へ移動 of 90
DIGIT AL HOME THEA TER SYSTEM HT -DS665T Instruction Manual COMPACT DIGITAL AUDIO COMPACT DIGITAL VIDEO 1p~44p(DS665T)-SECAGB 9/22/04 5:27 PM Page 3.
1 Safety W arnings CLASS 1 LASER PRODUCT This Compact Disc player is classified as a CLASS 1 LASER product. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.
2 Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches).
Features 3 Multi-Disc Playback & AM/FM T uner The HT -DS665T combines the convenience of multi-disc playback capability , including DVD-AUDIO, DVD-VIDEO, VCD, CD, MP3-CD, CD-R/RW , and DVD-R/RW , with a sophisticated AM/FM tuner , all in a single player .
4 PREP ARA TION Contents PREP ARA TION Safety Warnings..................................................................................................................................................................1 Precautions .....................
DVD (Digital V ersatile Disc) offers fantastic audio and video, thanks to Dolby Digital surround sound and MPEG-2 video compression technology . Now you can enjoy these realistic effects in the home, as if you were in a movie theater or concert hall. V I D E O DVD players and the discs are coded by region.
CD-R Discs • Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc. • Use a 650MB/74 minute CD-R. Other CD-R media, may not be playable. • Some CD-RW (Rewritable) media, may not be playable.
7 Description —Front Panel— Power ( ) button Standby indicator Function button SURROUND PLUS button / Virtual Headphone button Headphone Jack MODE(RRSS/SDSM) button Auto Sound Calibration button O.
Audio Cable Video Cable Anynet Cable AM Antenna Remote Control Auto Sound Calibration Microphone FM Antenna Accessories User's Manual PREP ARA TION —Rear Panel— FM Antenna Connector External Video Component Input Connectors External Audio Component Input Connector 5.
9 Description TV DVD RECEIVER OPEN/CLOSE DISC SKIP TUNER AUX EZ VIEW SLOW TUNING/CH PL II MODE PL II EFFECT R E T U R N M EN U IN F O MUTE SURR. PLUS V-H /P SUPER 5.
10 PREP ARA TION To open the remote control cover, push the top of the cover, then slide downward. Insert Remote Batteries The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be operated at a horizontal angle of up to 30° from the remote control sensor.
Speaker Assembly Method The speakers can be installed on stands or a wall, depending whether the RRSS or SDSM speaker installation configuration is used. Read the following instructions on speaker assembly carefully and install the speakers correctly.
• Sound comes out whether you connect either of Front Speaker and Front Stand. Select one to connect the speaker wire. • If you assemble Front Speaker and Front Stand, it is recommended to connect the speaker wire to the rear of front stand for clean wire arrangement.
Speaker Assembly Method (Con’t) 13 • To avoid personal injury or damage to the speakers when installed on the wall, make sure to tightly fasten the speakers so they will not fall down.
14 Installing speakers in the SDSM (Super Digital Sound Master) Configuration using stands Installing the Front and Rear speakers on stands Follow the instructions and install the speakers as shown below. Install the front speaker on the front stand. 1 Turn the screw on the rear of front speaker to fasten it.
Speaker Assembly Method (Con’t) 15 Installing speakers in the SDSM (Super Digital Sound Master) Configuration using wall mounts Installing speakers on front and rear walls Follow the instructions and install the speakers as shown below. Insert the front speaker cover on the front speaker.
16 CONNECTIONS Install the rear speaker on the rear stand. 7 Connect the rear speaker wire on the bottom of rear stand. 8 Fasten 2 screws (separated) on the wall. 9 Hang the rear speaker on the wall. 10 Unfasten and disconnect the screw on the bottom of rear stand.
17 Subwoofer • The position of the subwoofer is not so critical. Place it anywhere you like. • Usually, it is placed by a corner near the front speakers. Front/Rear Speakers / • Place these speakers in front of your listening position, facing inwards (about 45°) toward you.
18 CONNECTIONS Black Press down the terminal tab on the back of the speaker. 1 Insert the black wire into the black terminal (–) and the gray wire into the gray (+) terminal, and then release the tab. 2 Connect the wires to the output plugs of the same color on the back of the main unit, making sure that the polarity (+/–) is correct.
HT-DS665T TV *B etter picture quality (in increasing order): Composite S-V ideo Component HDMI - Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system to the VIDEO IN jack on your TV . Composite Video ...
20 CONNECTIONS • If you connect the HDMI and Component outputs (P R , P B , Y) at the same time, the Component output resolution changes automatically to the designated HDMI resolution.
21 Press and hold DCDi button on the remote control for over 3 seconds. • Each time the button is pressed, the selection alternates between DCDi ON and DCDi OFF . Converts the interlace signal to progressive to prevent flickering and to remove distortion or noise on the edge of screen.
22 CONNECTIONS Connect Audio In on the DVD player to Audio Out on the external analog component. • Be sure to match connector colors. 2 Analog signal components such as a VCR or TV. Press AUX on the remote control to select ‘DIGIT AL IN / AUX1 / AUX 2’.
23 Connect the Anynet input terminal on the back of this unit to your Samsung TV's Anynet output terminal. 1 Connect the Anynet Out T erminal on the back of this unit to the Anynet input of Samsung external A V devices.
24 CONNECTIONS The cooling fan supplies cool air to the unit to prevent overheating. Please observe the following cautions for your safety . • Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.
• You can operate the TV after TV indicator (red) blinks 1 time, and operate DVD receiver after DVD indicator (green) blinks 1 time. • Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons. • By default, the remote control is set to work with Samsung TVs.
CONNECTIONS • In this manual, the instructions marked with "DVD ( )" are applicable to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs. Where a particular DVD type is mentioned, it is indicated separately . • Depending on the content of the disc, the initial screen may appear different.
27 Disc Playback 2 1 Press OPEN/CLOSE button to open the disc tray . 3 Press DISC SKIP button. • Rotate the carousel tray so you can load the third, fourth, and fifth discs . 4 Close the compartment by pressing the OPEN/CLOSE button again. Load one or more discs.
28 . Selecting a Disc in the Disc changer To select a specific disc, press the corresponding DIRECT PLA Y (1, 2, 3, 4, 5) buttons on the front panel or DISC SKIP on the remote control, until the required disc indicator flashes. The DVD/CD function is automatically selected when Disc Skip is pushed.
29 • Depending on the recording mode, some MP3-CDs may not play. • Table of contents of a MP3-CD varies depending on the MP3 track format recorded on the disc. Note MP3-CD Playback Data CDs (CD-R, CD-RW) encoded in MP3 format can be played. 2 In Stop mode, use Cursor , , , buttons to select the album, and then press the ENTER button.
30 OPERA TION JPEG Disc Playback Images captured with a digital camera or camcorder, or JPG files on a PC can be stored on a CD and then played back with this unit.
Displaying Disc Information You can view disc playback information on the TV screen. Press INFO button. • Each time the button is pressed, the display changes as follows: DVD Display disappears Disp.
32 OPERA TION Checking the Remaining T ime CHAPTER REMAIN TITLE REMAIN CHAPTER ELAPSED TITLE ELAPSED Each time the REMAIN button is pressed Press the REMAIN button.
Fast/Slow Playback Fast Playback Press and hold . • Each time the button is held down during playback, the playback speed changes as follows: Press SLOW button. • Each time the button is pressed during playback, the playback speed changes as follows: Slow Playback DVD 33 DVD VCD CD MP3 • Reverse slow playback does not work with VCDs.
Skipping Scenes/Songs 34 • During fast playback of a CD or MP3-CD, sound is heard only at 2x speed, and not at 4x, 8x, and 32x speeds. • No sound is heard during slow playback and step motion playback.
Repeat Playback Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file). 35 Press REPEA T button. • Each time the button is pressed during playback, the.
36 • CHAPTER : Repeatedly plays the selected chapter . • TITLE : Repeatedly plays the selected title. • GROUP : Repeatedly plays the selected group. • RANDOM : Plays tracks in random order . (A track that has already been played may be played again.
A-B Repeat Playback You can repetitively play back a designated section of a DVD. • The A-B Repeat function will not work on an MP3 or JPEG disc. 2 Press Cursor button to move to REPEA T PLA YBACK ( ) display . • For a VCD or CD, press INFO button once.
Angle Function This function allows you to view the same scene in different angles. DVD 2 Press Cursor button to move to ANGLE ( ) display . 1 Press INFO button. 1/3 • Each time the button is pressed, the angle changes as follows: 3 Press Cursor , or numeric buttons to select the desired angle.
Zoom Function This function allows you to enlarge a particular area of the displayed image. Zoom (Screen Enlarge) Function DVD VCD Aspect Ratio DVD 2 Press Cursor , , , buttons to move to the area you want to enlarge. 1 Press ZOOM button. • Each time the button is pressed, the zoom level changes as follows: 3 Press ENTER button.
40 Bonus Group Function Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key number to access. See the disc packaging for details and the-key number. Bonus Group When you play a DVD-Audio disc that has a bonus group, the key number input screen appears automatically .
41 Selecting Audio/Subtitle Language • Depending on the number of languages on a DVD disc, a different audio language (ENGLISH, SPANISH, FRENCH, etc.) is selected each time the button is pressed. 2 Press Cursor , buttons or numeric buttons to select the desired audio language.
42 Moving Directly to a Scene/Song • The selected file will be played. • An MP3 or JPEG disc cannot be moved from the disc information screen. • When playing an MP3 or JPEG disc, you cannot use , to move a folder. To move a folder, press (Stop) and then press , .
Using Disc Menu You can use the menus for the audio language, subtitle language, profile, etc. DVD menu contents differ from disc to disc. DVD 43 2 • When you select the disc menu that is not supported by the disc, the " This menu is not supported " message appears on the screen.
Using the T itle Menu For DVDs containing multiple titles, you can view the title of each movie. Depending on the disc, the availability of this feature may vary. 2 Press Cursor , button to move to ‘T itle Menu’. DVD 1 In Stop mode, press MENU button.
45 Setting the Language OSD (On-Screen Display) language is set to English by default. 2 1 In Stop mode, press MENU button. Press Cursor button to move to ‘ Setup ’ and then press ENTER button. • To select other language, select OTHER and enter the language code of your country.
46 * If the language you selected is not recorded on the disc, menu language will not change even if you set it to your desired language. Selecting the OSD Language Selecting the Audio Language (recorded on the disc) 4 • Once the setup is complete, if the language was set to English, OSD will be displayed in English.
47 Setting TV Screen type Depending on your TV type (Wide Screen TV or conventional 4:3 TV), you can select the TV's aspect ratio. 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. • Once the setup is complete, you will be taken to the previous screen.
48 SETUP The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of wide screen and high definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
49 Setting Parental Controls (Rating Level) Use this to restrict playback of adult or violent DVDs you do not want children to view. 2 1 In Stop mode, press MENU button.
50 • This function works only if a DVD disc contains the rating level information. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 4 • The password is set to "7890" by default. • Once the setup is complete, you will be taken to the previous screen.
2 1 Press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. 51 Setting the Password You can set the password for the Parental (rating level) setting.
4 • Enter the old password, a new password, and confirm new password. • The setting is complete. 3 5 Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 52 Press Cursor button to move to ‘P ASSWORD’ and then press ENTER button.
53 Setting the W allpaper While watching a DVD, VCD or JPEG CD, you can set the image you like as background wallpaper. • “ COPY LOGO DATA ” will be displayed on the TV screen. • The selected wallpaper will be displayed. 2 1 3 During playback, press PLA Y/P AUSE button when an image you like appears.
54 SETUP 2 1 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Setup’ and then press ENTER button. Press Cursor button to move to ‘LOGO’ and then press ENTER button. To Change the W allpaper 5 4 Press MENU button to exit the setup screen.
2 1 Press the MENU button while the disc tray is open. Press Cursor button to move to ‘Setup’ and then press ENTER button. 55 DVD Playback Mode • DVD Play mode is set to DVD Audio as factory default setting. Note Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
4 3 Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. 56 Press Cursor button to move to ‘DVD TYPE’ and then press ENTER button. Press Cursor , button to move to ‘DVD VIDEO’ and then press ENTER button.
2 1 4 3 Setting the Speaker Mode Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button.
Setting the T est T one Use the Test Tone feature to check the speaker connections and to adjust the speaker levels. L: Front Speaker (L) C: Center Speaker SW: Subwoofer R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R) Press RETURN button to return to the previous level.
Setting the Delay T ime If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.
60 • Setting REAR (SURROUND) SPEAKERS If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms.
61 Setting the Audio Quality You can adjust the balance and level for each speaker. 2 1 4 3 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. Press Cursor button to move to ‘SOUND EDIT’ and then press ENTER button.
• The adjustments will appear on the main unit's display, not on your TV screen. Adjusting Front/Rear Speaker Balance • You can select between 00 and –06 and OFF. • The volume decreases as you move closer to –6. Adjusting Center/Rear/Subwoofer Speaker Level • The volume level can be adjusted in steps from +6dB to –6dB.
63 12 In Stop mode, press MENU button. Press Cursor button to move to ‘Audio’ and then press ENTER button. • The Cursor button is pressed, the greater the effect, and the Cursor button is pressed, the smaller the effect. 34 Press Cursor button to move to ‘DRC’ and then press ENTER button.
64 SETUP AV SYNC Setup Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. • 'Audio' menu appears. 2 1 • Setup menu appears. • AV-SYNC screen appears. 3 Press Cursor , buttons to move to ‘Audio’ and then press ENTER button.
65 Dolby Pro Logic II Mode You can select the desired Dolby Pro Logic II audio mode. Press PL II MODE button. PRO LOGIC II • MUSIC: When listening to music, you can experience sound effects as if you are listening to a live performance. • CINEMA: Adds realism to the movie soundtrack.
66 Dolby Pro Logic II Effect This function works only in Dolby Pro Logic MUSIC mode. 12 • You can select between 0 and 7. • You can select between 0 and 6. 34 • PANORAMA: This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.
67 • If you are instaling the system for the first time, “ NO MEASURED DATA ” will appear on the display when you press the ASC button while the ASC Microphone is not connected. • During the Auto Sound Calibration setup, the speaker tone's output volume is fixed.
68 SETUP • If the system is installed at a location where sound cannot be reflected (e.g., an open space without walls), the speaker distance, channel level and rear sound reflection effect may be set incorrectly during the ASC setup. Caution To select the ASC that you have set Briefly press the ASC button.
RRSS (Rear Reflecting Surround System) Setting Select the RRSS mode for sound similar to 5.1 channel sound when rear speakers are used in the front as reflectors. • Each time you press this button, RRSS and SDSM will be repetitively selected on the display.
SDSM (Super Digital Sound Master) Setting Select the SDSM mode when rear speakers are detached from the tower and installed behind your listening/viewing position. • Each time you press this button, RRSS and SDSM will be repetitively selected on the display.
71 Live Surround Mode You can use the live surround mode to listen to 2-channel stereo sources in realistic 5.1-channel surround sound. 12 • CINEMA : A powerful sound field effect as in a movie theater. • STADIUM : A sound field effect of being at a football or baseball game.
SETUP 72 SUPER 5.1 1 2 Press the SUPER 5.1 button to select " SUPER 5.1 ". To cancel this function, press the SUPER 5.1 button to select " SUPER OFF ". • If you insert a DVD recorded in more than 2 channels and press the SUPER 5.
73 SURROUND PLUS The Surround Plus function works when the headphone is not connected. SURROUND PLUS Enable the Surround Plus function if you have installed the system at a location where sound cannot be reflected. 1 2 Press the SURR. PLUS button to select the surround plus function.
74 SETUP V irtual Headphone The Virtual Headphone function works when the headphone is connected. V irtual Headphone You can enjoy a realistic sound very similar to that of a 5.1-channel sound system using regular stereo headphones. 1 2 Press the V -H/P button to select " VIR TUAL ON ".
75 Listening to Radio You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation. 2 1 • The selection toggles back and forth between "FM ➝ AM" each time the TUNER(BAND) button is pressed.
76 Presetting Stations To tune in to a preset station, press on the remote control to select a channel. • Refer to Step 2 on page 75 to automatically or manually tune in to a station. 2 1 • Each time the button is pressed, the band switches between "FM ➝ AM".
77 Convenient Functions • The remaining time before the DVD player will shut itself off is displayed. • Pressing the button again changes the sleep time from what you have set earlier. To confirm the sleep timer setting, press SLEEP button. • "SLEEP" will be displayed.
78 • Each time the button is pressed, the brightness changes as follows: DARK ➞ BRIGHT . Adjusting Display Brightness You can adjust the brightness of the display on the main unit to improve video quality. Press DIMMER button. • ‘ MUTE ON’ appears in the display.
79 Operating a TV with the Remote Control • The remote control may not work on some brands of TVs. Also some operations may not be possible depending on your brand of TV. • If you do not set the remote control with the code for your brand of TV, the remote control will work on a Samsung TV by default.
80 MISCELLANEOUS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 SAMSUNG ANAM DAEWOO LG HITACHI JVC SHARP SONY TOSHIBA SANYO MITSUBISHI MATSUSHITA TELEFUNKEN RCA PANASONIC SABA PHILIPS GRUNDIG ZENITH MIVAL NOBLEX EMERSON MAGNAVOX LOEWE THOMSON NORDMENDE LOEWE OPTA BLAUPUNKT SIEMENS TV Brand Code List No.
81 Before Calling for Service Refer to the chart below for help with common problems. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.
82 • Check to see if the TV power is on. • Check to see if the video cables are connected properly. • Check for damage, deformities or dirt on the disc • Disc is rotating but no picture is produced. • Picture quality is poor and picture is shaking.
83 Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints will not get on the surface. Do not stick paper or tape on the disc. Do not keep in direct sunlight Keep in a cool ventilated area Keep in a clean Protection jacket.
MISCELLANEOUS 84 Language Code List Code Language Code Language Code Language Code Language 1027 Afar 1181 Frisian 1334 Latvian, Lettish 1506 Slovenian 1028 Abkhazian 1183 Irish 1345 Malagasy 1507 Sam.
85 S P E A K E R S Subwoofer speaker 3 Ω 40Hz~400Hz 84dB/W/M 125W 200W 7.8 x 15.8 x 17.3 inches 18.5 Ibs Front / Rear speaker 3 Ω x 4 150Hz~20kHz 200Hz~15kHz 85dB/W/M / 86dB/W/M 125W 200W 3.3 x 20.7 x 5.2 inches 12.2 x 41.9 x 12.2 inches (Stand Included) 3.
86 Notes on T erminology MISCELLANEOUS Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left , from the right , etc.). With such discs, the Angle button can be used to change the angle of view for specific scenes.
Memo 87 45P~88P(DS665T)-SECAGB 9/22/04 5:28 PM Page 88.
88 MISCELLANEOUS Samsung Limited W arranty Samsung Electronics Canada Inc. (SECA), warrants that this product is free from defective material and workmanship.
AH68-01493X SAMSUNG ELECTRONICS CANADA, INC. HEADQUARTERS 7037 Financial Drive, Mississauga, Ontario, Canada L5N 6R3 TEL: 1-905-542-3535 www .samsung.ca SERVICE DIVISION 7037 Financial Drive, Mississa.
デバイスSamsung HT-DS665Tの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung HT-DS665Tをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung HT-DS665Tの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung HT-DS665Tの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung HT-DS665Tで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung HT-DS665Tを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung HT-DS665Tの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung HT-DS665Tに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung HT-DS665Tデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。