SamsungメーカーLE22A455C1Dの使用説明書/サービス説明書
ページ先へ移動 of 49
Country Customer Care Centre Web Site AUSTRIA 0800-SAMSUNG (726-7864) www .samsung.com/at BELGIUM 0032 (0)2 201 24 18 www .samsung.com/be CZECH REPUBLIC 844 000 844 www .samsung.com/cz Distributor pro Českou republiku: Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK 70 70 19 70 www .
© 2008 Samsung Electronics Co., Ltd. All rights reserved. Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention.
Contents CONNECTING AND PREP ARING YOUR TV List of Parts ........................................................ 2 Installing the Stand ............................................. 2 Installing the W all Mount Kit ............................... 2 Viewing the Control Panel .
English - 2 List of Parts Please make sure the following items are included with your LCD TV . If any items are missing, contact your dealer. Remote Control & Batteries (AAA x 2) Power Cord Cover-.
English - 3 Viewing the Control Panel 1 SOURCE T oggles between all the available input sources (TV , Ext., A V , Component, PC, HDMI, DTV). In the on-screen menu, use this button as you use the ENTER button on the remote control. 2 MENU Press to see an on-screen menu of your TV’s features.
English - 4 Viewing the Connection Panel Whenever you connect an external device to your TV , make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. ➣ ➣ The product colour and shape may vary depending on the model.
English - 5 5 ANT IN T o view television channels correctly , a signal must be received by the set from one of the following sources: An outdoor aerial / A cable television network / A satellite network 6 COMMON INTERFACE Slot When CI Card isn’t inserted in some channels, "Scrambled Signal" is displayed on the screen.
English - 6 T OO LS 1 T elevision Standby button 2 Selects the TV and DTV mode directly 3 Number buttons for direct channel access 4 One/T wo-digit channel selection 5 + : V olume increase : Volume decrease 6 T emporary sound switch-off 7 Use to quickly select frequently used functions.
English - 7 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3.
English - 8 Y ou can use the TOOLS button to select your frequently used functions quickly and easily . The “T ools” menu change depending on which external input mode you are viewing. 1. Press the TOOLS button. The “T ools” menu will appear .
English - 9 When the TV is initially powered on, several basic settings proceed automatically and subsequently . The following settings are available. Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted.
English - 10 9. Press the ENTER button to confirm your setting. The message “Enjoy your viewing” is displayed. When you have finished, press the ENTER button. Even if the ENTER button is not pressed, the message will automatically disappear after several seconds.
English - 11 Storing Channels Manually Not available in DTV or external input mode. Y ou can store television channels, including those received via cable networks. When storing channels manually , you can choose: ♦ Whether or not to store each of the channels found.
English - 12 Not available in DTV or external input mode. Using the Channel Manager, you can conveniently lock or add channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
English - 13 This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. Not available in DTV or external input mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Channel", then press the ENTER button.
English - 14 Use fine tuning to manually adjust a particular channel for optimal reception. Not available in DTV or external input mode. 1. Use the number buttons to directly select the channel that you want to fine tune. 2. Press the MENU button to display the menu.
English - 15 Y ou can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ENTER button again, to select "Mode".
English - 16 Y our set has several settings which allow you to control picture quality . 1. T o select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) 2. Press the ▲ or ▼ button to select a particular item.
English - 17 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button. 3. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 18 ♦ Screen Mode : Wide/16:9/Wide Zoom/Zoom/4:3 When setting the picture size to "Auto Wide" in a 16:9 wide TV , you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing.
English - 19 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button. 3. When you are satisfied with your setting, press the ENTER button.
English - 20 Y ou can set the sound mode in the "T ools" menu. When you set to "Dual I-II", the current sound mode is displayed on the screen. 1. Press the TOOLS button on the remote control. 2. Press the ▲ or ▼ button to select “Dual I-II".
English - 21 Y ou can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
English - 22 When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. 1. Press the MENU button to display the on-screen menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
English - 23 Melody / Energy Saving 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 24 Y ou can select among external sources connected to your TV’ s input jacks. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Input", then press the ENTER button. 2. Press the ENTER button again, to select "Source List".
English - 25 ♦ The company does not guarantee the normal operation of the DTV menu for countries other than the supported countries (France, Germany , Italy , Netherlands, Spain, Switzerland, United Kingdom, Austria) because only these country standards are supported.
English - 26 Updating the Channel List Automatically Y ou can update the channel list when the broadcaster adds new Services or if you move the TV to a new location. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
English - 27 Editing Y our Favourite Channels Y ou can edit your favourite channels using the four colour buttons. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
English - 28 ♦ Renumber (depending on the country) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Digital Channel", then press the ENTER button.
English - 29 Displaying Programme Information While viewing a channel, additional information about the current programme may be displayed. 1. While viewing a programme, press the INFO button. The programme information is displayed. 2. T o exit from banner information, press the INFO button.
English - 30 Viewing the EPG (Electronic Programme Guide) Information The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel.
English - 31 Setting the Default Guide Y ou can preset the default guide style. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ENTER button, to select "Guide".
English - 32 Viewing All Channels and Favourite Channels In the EPG menu, you can display all channels or favourite channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
English - 33 Setting up the Parental Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user . The on-screen menu will instruct you to assign a PIN code (you can change it later , if necessary).
English - 34 Setting the Subtitle Y ou can activate and deactivate the subtitles. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
English - 35 Selecting the Digital T ext (UK only) If the programme is broadcast with digital text, this feature is enabled. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button.
English - 36 Selecting the Time Zone (Spain only) Select the local time zone. 1. Press the MENU button to display the menu. ENTER button.
English - 37 Upgrading the Software T o keep your product up-to-date with new Digital T elevision features then software upgrades are periodically broadcast as part of the normal T elevision signal. It will automatically detect these signals and display the software upgrade banner .
English - 38 Viewing Common Interface This contains information on CAM inserted in the CI slot and displays it. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER button. 2.
English - 39 Selecting the Preferred Language (Subtitle, Audio or T eletext) Y ou can change the default value for subtitle, audio teletext languages. Displays the language information for the incoming stream. 1. Press the MENU button to display the menu.
English - 40 Preference This menu consists of 6 sub-menus: Primary Audio Language, Secondary Audio Language, Primary Subtitle Language, Secondary Subtitle Language, Primary T eletext Language, Secondary T eletext Language. Using this feature, users can select one of the languages.
English - 41 The Wi ndow s displ ay-se ttin gs for a typi cal com puter are shown below . The actu al scre ens on you r PC may be diff eren t depen ding upo n your par ticu lar vers ion of Wi ndow s and your particu lar vid eo card .
English - 42 Setting up the TV with your PC Preset: Press the SOURCE button to select PC mode. 1. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
English - 43 Most television stations provide written information services via T eletext. The index page of the teletext service gives you information on how to use the service. In addition, you can select various options to suit your requirements by using the remote control buttons.
English - 44 The teletext pages are organized according to six categories: Part Contents A Selected page number . B Broadcasting station identity . C Current page number or search status. D Date and time. E T ext. F Status information. F ASTEXT information.
English - 45 Securing the TV to the W all Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular , ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over , causing serious injuries or death.
English - 46 T roubleshooting: Before Contacting Service Personnel No sound or picture. Check that the mains lead has been connected to a wall socket. Check that you have pressed the button on your set. Check the picture contrast and brightness settings.
English - 47 T echnical and Environmental Specications Model Name LE22A455 / LE22A457 Screen Size (Diagonal) 22 inch PC Resolution 1680 x 1050 @ 60 Hz Sound Output 3W x 2 Dimensions (WxDxH) Body Wi.
デバイスSamsung LE22A455C1Dの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung LE22A455C1Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung LE22A455C1Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung LE22A455C1Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung LE22A455C1Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung LE22A455C1Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung LE22A455C1Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung LE22A455C1Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung LE22A455C1Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。