SamsungメーカーLE40M5の使用説明書/サービス説明書
ページ先へ移動 of 70
LCD TV LE26M5 LE32M5 LE40M5 LE46M5 Owner’ s Instr uctions Before operating the unit, please read this manual thoroughly , and retain it for future reference. - AFTER SALES SER VICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
Precautions W hen Displaying a Still Ima ge A still image may cause permanent damage to the TV screen. • Digital Ready TV : When you select the regular screen (4:3) mode to watch an SD-grade digital broadcast (and the Set-T op Box output is 480p).
• Integrated Digital TV (Wide-screen): When the TV receives SD-grade (regular) broadcasting signals (receives 480p regular signals). • Digital Ready TV (wide-screen): digital TV: When the TV receives SD-grade (regular) broadcasting signals (with a Set-T op Box).
English-2 Contents C ONNECTING AND P REP ARING Y OUR TV Viewing the Control Panel ......................................................................................... 4 Viewing the Connection Panel ................................................
English-3 Contents S ETTING THE S OUND Setting the T ruSurround XT (SRS TSXT) .......................................................... 38 Adjusting the V olume Automatically .................................................................... 39 Connecting Headphones .
English-4 Viewing the Contr ol P anel SOURCE Displays a menu of all of the available input sources ( TV , Ext. 1, Ext. 2, A V , S-Video, Component, PC, HDMI). Also used to confirm your choice on the on-screen menu. MENU Press to see an on-screen menu of your TV’s features.
English-5 Viewing the Connection P anel Whenever you connect an audio or video system to your set, ensure that all elements are switched of f . When connecting an external device, match the colour of the connection terminal to the cable. Power Input * LE26M5 [Rear Panel Jacks] BN68-00926F-00Eng.
Viewing the Connection P anel English-6 * LE32M5 / LE40M5 / LE46M5 Power Input Whenever you connect an audio or video system to your set, ensure that all elements are switched of f . When connecting an external device, match the colour of the connection terminal to the cable.
English-7 Viewing the Connection P anel Connecting an Aerial or Cable Television Network T o view television channels correctly , a signal must be received by the set from one of the following sources.
English-8 Viewing the Connection P anel Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled A V devices ( Set-T op Box es, DVD players, A V receivers and digital TVs). - No sound connection is needed for an HDMI to HDMI connection.
English-9 Viewing the Remote Contr ol (All Functions Ex cept T elete xt) Number buttons for direct channel access Use to store and delete channels to/from memory . (Refer to page 20) When your remote does not work, change the batteries and press the “RESET” button for 2-3 seconds before use.
English-10 Viewing the Remote Contr ol (T elete xt Functions) Exit from the teletext display P : T eletext next page P : T eletext previous page T eletext Function : Refer to pages 54-56 for details T.
English-1 1 Installing Batteries in the Remote Contr ol 1 Slide the cover out completely . 2 Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3 Replace the cover .
English-12 Switc hing On and Of f The mains lead is attached to the rear of your set. 1 Plug the mains lead into an appropriate socket. Result : The standby indicator lights up on the front panel. The main voltage is indicated on the rear of your set and the frequency is 50 or 60Hz.
English-13 Y our set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1 Press the POWER button on the remote control. Result : The screen is turned off and a red standby indicator appears on the front of your set.
English-14 Becoming Familiar with the R emote Contr ol The remote control is used mainly to: Change channels and adjust the volume. Set up your set using the on-screen menu system. The following table presents the most frequently used buttons and their functions.
English-15 Plug and Play When the set is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the set is in standby mode, press the POWER button on the remote control.
English-16 Plug and Play If you want to reset this feature... 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Setup . Press the ENTER button . Result : The options available in the Setup group are displayed.
English-17 Storing Channels Automa ticall y Y ou can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However , you can sort numbers manually and clear any channels you do not wish to watch.
Y ou can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.
8 If you know the number of the channel to be stored, Press the or button to select Channel and then press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the or button. Press the button to select channel. Select the required number by pressing the or button and then press the ENTER button.
Y ou can exclude the channels you chose from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Press the MENU button.
English-21 Sor ting the Stored Channels Y ou can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. Give easily remembered numbers to the channels that you watch most often.
English22 Assigning Channels Names Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Channel .
Fine T uning Channel Reception If the reception is clear , you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If, however , the signal is weak or distorted, you may have to fine-tune the channel manually.
English-24 Changing the Picture Standar d Y ou can select the type of picture which best corresponds to your viewing requirements. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displayed.
English-25 Adjusting the Custom Pictur e Y our set has several settings which allow you to control picture quality . 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displayed.
English-26 Changing the Colour T one R esetting the Pictur e Settings to the F actor y Defaults Y ou can select the most comfortable colour tone to your eye. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Picture .
English-27 Changing the Picture Size Y ou can select the picture size which best corresponds to your viewing requirements. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displayed.
English-28 Using the Digital NR (Digital Noise Reduction) F eature If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Result: The main menu is displayed.
English-29 DNIe (Digital Na tural Image engine) Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes.
My Colour Control is to adjust the most preferred colours such as Blue, Green, Pink without interfering with other colours in order for each consumer to enjoy the screen colour of his/her choice. 1 Press the MENU button. Result : The main menu is displayed.
Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture . Result : The options available in the Picture group are displayed.
Brightness Sensor Brightness Sensor is to adjust brightness of screen either automatically or manually by detecting brightness of surrounding environment using light detecting sensor . 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Picture .
English-33 Y ou can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1 Press the MENU button.
9 Press the or button to select Position and then press the ENTER button. Select the position of the sub picture by pressing the or button and then press the ENTER button. Result : Y ou can move the sub picture. When the size of the sub picture is set to or , this feature does not work.
English-35 Adjusting the V olume Y ou can adjust the volume using your remote control. Press the button to increase the volume. Result : A horizontal bar is displayed and the volume increases until you release the button. The cursor moves to the right to indicate the volume.
English-36 Switc hing the Sound Of f T empor arily Y ou can switch the sound off temporarily. Example : You wish to answer the telephone. 1 Press the MUTE button. Result: The sound is switched off and “ Mute ” is displayed . 2 When you wish to turn the sound back on, press the MUTE button again or either of the volume buttons.
English-37 Changing the Sound Standar d Adjusting the Sound Settings Y ou can select the type of the special sound effect to be used when watching a given broadcast. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Sound .
Setting the T r uSur round XT (SRS TSXT) TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling,virtual surround sound experience through any two-speaker playback system, including internal television speakers.
Adjusting the V olume Automa tically Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed.
English-40 Connecting Headphones Y ou can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set.
English-41 Listening to the Sound of the Sub Pictur e During the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Sound . Result : The options available in the Sound group are displayed.
English-42 Setting and Displaying the Cur rent Time Y ou can set the TV’s clock so that the current time is displayed when you press the INFO button. Y ou must also set the time if you wish to use the automatic On/Off timers. If you disconnect the power cord, you have to set the clock again.
English-43 Setting the Sleep Timer Y ou can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Setup .
Y ou can set the On/Off timers so that the set will: Switch on automatically and tune to the channel of your choice at the time you select. Switch off automatically at the time you select. The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on page 42 ).
English-45 Activa ting the Child Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the lower-right panel.
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off". 1 Press the MENU button.
English-47 Selecting a De vice from Exter nal Sour ces Y our set enables you to choose which audio/video signals are output to the external connector . 1 Press the MENU button. Press the ENTER button to select Input. Result: The options available in the Input group are displayed.
English-48 Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input. 1 Check that all the necessary connections have been made. 2 Press the SOURCE button. Result : The edited device and audio status are displayed on top- left of the set.
English-49 Setting up Y our PC Software ( Based on W indows XP ) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of W indows and your particular video card.
Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically . Press the PC button under the remote’s cover to select the PC mode. 1 Press the MENU button.
English-51 Coar se and Fine T uning of the Image The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again.
English-52 Changing the Image P osition Press the PC button under the remote’s cover to select the PC mode. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Setup . Press the ENTER button. Result: The options available in the Setup group are displayed.
English-53 Initializing the Image Settings Y ou can replace all image settings with the factory default values. Press the PC button under the remote’s cover to select the PC mode. 1 Press the MENU button. Result : The main menu is displayed. 2 Press the or button to select Setup .
English-54 T eletext Decoder Most set channels carry “ teletext ”, pages of written information that provide information such as: T elevision programme times. News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing.
Press the number buttons on the remote control to enter the page number directly: 1 Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed.
English-56 Using Faste xt to Select a T eletext Page The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. 1 Display the teletext contents page by pressing the TTX/MIX ( / ) button.
English-57 T r oubleshooting: Bef or e Contacting Ser vice P er sonnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below , note the model and serial number of your set and contact your local dealer .
English-58 Installing the W all Mount Kit (LE26M5) This installation is to be used when attaching the wall mount to a concrete wall. When attaching to other building materials, please contact your nearest dealer .
English-59 Installing the W all Mount Kit (LE26M5) 2 T urn the power off and unplug the power cord from the outlet. Place the TV faced down on a soft cloth or cushion on a table. Remove the four screws from the back of the TV . Separate the stand from the TV .
English-60 Installing the W all Mount Kit (LE32M5, LE40M5, LE46M5) This installation is to be used when attaching the wall mount to a concrete wall. When attaching to other building materials, please contact your nearest dealer .
English-61 Installing the W all Mount Kit (LE32M5, LE40M5, LE46M5) 2 T urn the power off and unplug the power cord from the outlet. Place the TV faced down on a soft cloth or cushion on a table. Remove the four screws from the back of the TV . Separate the stand from the TV .
English-62 Installing the Stand (LE26M5, LE32M5) 1. Place the TV faced down on a soft cloth or cushion on a table. 2. Attach the stand to the TV set as shown in the picture. 3. Use the four screws to tightly fix the stand. < 2 > < 3 > BN68-00926F-00Eng.
English-63 Using the Anti-T heft K ensington Loc k 1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). 2. Connect the Kensington lock cable. 3. Fix the Kensington lock to a desk or a heavy stationary object.
English-64 T echnical and En vir onmental Specifica tions Model Name LE26M5 LE32M5 LE40M5 LE46M5 Panel Size 26" Diagonal (16:9) 32" Diagonal (16:9) 40" Diagonal (16:9) 46" Diagonal (16:9) Display Size 575.77(H) x 323.71(V) mm 697.68 (H) x 392.
English-65 T echnical and En vir onmental Specifica tions Display Mode (PC) Model LE26M5 LE32M5 LE40M5 LE46M5 Weight With stand 13.3 kg (29.32 lbs) 19.
English-66 Pin Configur ations SCART Connector Pin Signal 1 Audio output R 2 Audio input R 3 Audio output L 4 Audio chassis return 5 V ideo chassis return (RGB blue) 6 Audio input L 7 RGB blue input 8.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. T o ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased.
デバイスSamsung LE40M5の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung LE40M5をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung LE40M5の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung LE40M5の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung LE40M5で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung LE40M5を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung LE40M5の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung LE40M5に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung LE40M5デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
