SamsungメーカーLE70F9の使用説明書/サービス説明書
ページ先へ移動 of 69
LCD TV LE52F9 LE70F9 Owner ’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference. ON-SCREEN MENUS PC DISPLA Y PICTURE IN PICTURE (PIP) TELETEXT Register your product at www .samsung.com/global/register Record your Model and Serial number here for future reference.
• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". T o avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.
Contents CONNECTING AND PREP ARING YOUR TV List of Parts ......................................................... 3 Installing the W all Mount Kit ................................ 3 Viewing the Control Panel ................................... 4 Viewing the Connection Panel .
English - 2 Symbol Press Important Note One-T ouch Button USING THE TELETEXT FEA TURE T eletext Decoder ............................................... 41 Displaying the T eletext Information ................... 42 Selecting a Specic T eletext Page .
English - 3 List of Parts Please make sure the following items are included with your LCD TV . If any items are missing, contact your dealer. Remote Control & Batteries (AAA x 2) Power Cord Cover-Bottom Cleaning Cloth W all mount items (sold separately) allow you to mount the TV on the wall.
English - 4 Viewing the Control Panel 6 5 6 8 7 6 6 4 8 7 The product colour and shape may vary depending on the model. Front Panel buttons T ouch the each button to operate. <LE52F9> <LE70F9> 1 SOURCE T oggles between all the available input sources (TV , Ext.
English - 5 Viewing the Connection Panel Whenever you connect an external device to your TV , make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. 1 EXT 1, EXT 2 -Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
English - 6 Supported modes for HDMI/DVI and Component HDMI/DVI 50Hz HDMI/DVI 60Hz Component 480i X X O 480p X O O 576i X X O 576p O X O 720p O O O 1080i O O O 1080p O O X 4 ANT IN T o view television.
English - 7 1 Selects a target device to be controlled by the Samsung remote control (TV , DVD, STB, CABLE, VCR) (Refer to pages 43~46) 2 T elevision Standby button 3 Number buttons for direct channel access 4 One/T wo-digit channel selection 5 It display "Channel List" on the screen.
English - 8 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment. 3.
English - 9 When the TV is initially powered on, several basic settings proceed automatically and subsequently . The following settings are available. Any functions related to Digital TV (DVB) will only work in countries or areas where DVB-T (MPEG2) digital terrestrial signals are broadcasted.
English - 10 If you want to reset this feature... 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 2. Press the ENTER/OK button again, to select "Plug & Play".
English - 11 Storing Channels Manually Not available in DTV or external input mode. Y ou can store television channels, including those received via cable networks. When storing channels manually , you can choose: ♦ Whether or not to store each of the channels found.
English - 12 Not available in DTV or external input mode. Using the Channel Manager, you can conveniently lock or add channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.
English - 13 This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after using the auto store. Not available in DTV or external input mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.
English - 14 If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). Not available in DTV or external input mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.
English - 15 Y ou can select the type of picture which best corresponds to your viewing requirements. 1. Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture". 2. Press the ENTER/OK button again, to select "Mode".
English - 16 Changing the Colour T one Y ou can select the most comfortable colour tone to your eyes. 1. T o select the desired picture effect, follow the "Changing the Picture Standard" instructions number 1 to 3. (On page 15) 2. Press the ▲ or ▼ button to select "Colour T one", then press the ENTER/OK button.
English - 17 Y ou can set detailed picture settings. 1. Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture". 2. Press the ▲ or ▼ button to select "Detailed Settings", then press the ENTER/OK button.
English - 18 ♦ Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio. ♦ 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting. ♦ Wide Zoom: Magnify the size of the picture more than 4:3.
English - 19 1. Press the MENU button to display the menu. Press the ENTER/OK button, to select “Picture”. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Available options: Digital NR, Active Colour , DNIe, Digital NR, Active Colour, DNIe, LED SmartLighting, Movie Plus.
English - 20 Y ou can display a sub picture within the main picture of set programme or video input. In this way , you can watch the picture of set programme or video input from any connected equipment while watching the main picture. 1. Press the MENU button to display the menu.
English - 21 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Sound", then press the ENTER/OK button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
English - 22 Y ou can set the sound mode by pressing the “DUAL” button. When you press it, the current sound mode is displayed on the screen. Y ou can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.
English - 23 Y ou can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
English - 24 When you start using your set for the first time, you must select the language which will be used for displaying menus and indications. 1. Press the MENU button to display the on-screen menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
English - 25 Game Mode/ Blue Screen / Melody / Light Effect / Energy Saving / HDMI Black Level / Feature Demo 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 2. Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
English - 26 Y ou can select among external sources connected to your TV’ s input jacks. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Input", then press the ENTER/OK button. 2. Press the ENTER/OK button again, to select "Source List".
English - 27 Previewing the DTV Menu System ♦ The company does not guarantee the normal operation of the DTV menu for countries other than the supported countries (France, Germany , Italy , Netherlands, Spain, Switzerland, United Kingdom, Austria, Sweden, Finland) because only these country standards are supported.
English - 28 Updating the Channel List Automatically Y ou can update the channel list when the broadcaster adds new Services or if you move the TV to a new location. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button.
English - 29 Y ou can edit your favourite channels using the four colour buttons. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
English - 30 ♦ Renumber (depending on the country) 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.
English - 31 Y ou can exclude the channels you have chosen from the channels you have scanned.When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
English - 32 The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available.
English - 33 If you make a scheduled viewing list of programs you may like to see, the channel will be automatically switched to the scheduled programme at the scheduled time even if you are watching another programme. 1. Press the MENU button to display the menu.
English - 34 In the EPG menu, you can display all channels or favourite channels. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button. 2. Press the ENTER/OK button again, to select "Guide".
English - 35 This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by a 4-digit PIN (Personal Identification Number) code that is defined by the user. The on-screen menu will instruct you to assign a PIN code (you can change it later , if necessary).
English - 36 Y ou can activate and deactivate the subtitles. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
English - 37 If the programme is broadcast with digital text, this feature is enabled. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
English - 38 Y ou can get information about the signal status. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
English - 39 This enables the user to select from the CAM-provided menu. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button.
English - 40 Y ou can reset the values stored to the factory default values. The Reset operation deletes all channel information and user preferences returningall values to their default factory state. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button.
English - 41 T eletext Decoder Most set channels carry " teletext ", pages of written information that provide information such as: ♦ T elevision programme times. ♦ News bulletins and Weather forecasts. ♦ Sports results. ♦ Subtitles for the hard of hearing.
English - 42 Y ou can display teletext information at any time, but signal reception must be good. Otherwise: ♦ Information may be missing. ♦ Some pages may not be displayed. T o activate the teletext mode and display the contents page: 1. Using the P ( ) or P ( ) button, select the channel providing the teletext service.
English - 43 Using Fastext to Select a T eletext Page The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. 1. Display the teletext contents page by pressing the TEXT/MIX ( ) button.
English - 44 VCR Brand Code SAMSUNG 000 001 002 003 004 005 077 078 079 ADMIRAL 020 AIWA 025 AKAI 004 027 032 AUDIO DYNAMICS 007 026 BELL&HOWELL 018 BROKSONIC 022 CANDLE 002 003 006 008 015 055 CA.
English - 45 CABLE BOX Brand Code SAMSUNG 000 001 002 003 004 005 006 007 GI 041 HAMLIN 003 024 031 HIT ACHI 025 030 JERROLD 038 039 MACOM 025 030 MAGNA VOX 019 023 028 OAK 026 P ANASONIC 003 022 027 .
English - 46 DVD Brand Code P ANASONIC 024 034 124 134 136 137 138 PHILIPS 036 076 ROTEL 1 17 1 18 RIO 120 RCA 023 035 074 075 131 132 RAITE 073 ROWA 038 SAMPO 104 SONY 026 029 126 127 128 129 130 141.
English - 47 The Wi ndows di splay -setti ngs for a typi cal comp uter are sh own belo w. Th e actu al scree ns on your PC may b e differe nt depen ding upo n your part icular vers ion of Win dows and yo ur parti cular vi deo card.
English - 48 Setting the PC Coarse and Fine T uning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again.
English - 49 Y ou can view higher quality pictures by configuring the screen settings in PC Mode. If you set the Home Theatre PC function to On, you can configure the Detail Settings (when Picture Mode is set to Standard or Movie) as in PC Mode. 1. Press the MENU button to display the menu.
English - 50 Using the WISELINK Function This function enables you to view and listen to photo (JPEG) and audio les (MP3) saved on a USB Mass Storage Class (MSC) device. Press the POWER button on the remote control or front panel. Connect a USB device containing JPEG and/or MP3 les to the WISELINK jack (USB jack) on the side of the TV .
English - 51 Using the WISELINK Menu 1. Press the MENU button. Press the ▲ or ▼ button to select “Input”, then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER/OK button. 3. Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press the ENTER/OK button.
English - 52 Using the PHOTO (JPEG) List This menu shows JPEG les and folders saved on an USB memory device . 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 51) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER/OK button.
English - 53 Using the Menu during a Slide Show Slide Show Speed : Select to control the slide show speed. Press the ▲ or ▼ button to select the required option("Fast", "Normal", Slow), then press the ENTER/OK button. Background Music: Select to choose whether you want to play an MP3 le during a slide show .
English - 54 Using the Option Menu 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 51) 2. Press the ◄ or ► button to move to “Photo”, then press the ENTER/OK button. The saved le information is displayed as a folder or le.
English - 55 Using the MP3 List This menu shows MP3 les from among the les saved on a USB memory device. 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 51) 2. Press the ◄ or ► button to move to “Music”, then press the ENTER/OK button.
English - 56 Using the Setup Menu Setup displays the user settings of the WISELINK menu. 1. Complete Steps 1 to 3 of “Using the WISELINK Menu”. (Refer to page 51 ) 2. Press the ◄ or ► button to move to “Setup”, then press the ENTER/OK button.
English - 57 What is Anynet + ? Anynet+ is an A V network system that enables an easy-to-use A V interface for users by controlling all connected A V devices through the Anynet+ menu when Samsung Electronics A V devices are connected. Connecting Anynet + Devices The Anynet+ system supports A V devices supporting Anynet+ only .
English - 58 Setting Up Anynet + The following settings are to use Anynet+ functions. Using the Anynet+ Function 1. Press the Anynet+ button. Press the ▲ or ▼ button to select Setup , then press the ENTER/OK button. 2. Press the ENTER/OK button to select Anynet+ (HDMI-CEC) , then press the ENTER/OK button.
English - 59 Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV . Anynet+ Menu Description View TV Switches from Anynet+ to TV broadcast mode. Select Device Y our TV connects to the corresponding device.
English - 60 Listening through a Receiver Y ou can listen to sound through a receiver instead of the TV speaker . 1. Press the Anynet+ button. Press the ▲ or ▼ button to select Receiver , then press the ENTER/OK button. 2. Press the ◄ or ► button to select to On , then press the ENTER/OK button.
English - 61 Once the wall mount is installed, the position of your TV can be easily adjustable. W all-Mount Adjustment (Sold separately) (LE52F9) Using the Remote Control Buttons Bu tt on O p er at i.
English - 62 T roubleshooting: Before Contacting Service Personnel Using the Anti-Theft Kensington Lock (depending on the model) The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately .
English - 63 T echnical and Environmental Specications Design and specifications are subject to change without prior notice. This device is a Class B digital apparatus. For the power supply and Power Consumption, refer to the label attached to the product.
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. T o ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
IMPORT ANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used.
This page is intentionally left blank. BN68-01313A-00Eng-0817.indd 66 2007-08-17 �� 5:36:25.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
デバイスSamsung LE70F9の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Samsung LE70F9をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung LE70F9の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung LE70F9の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung LE70F9で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung LE70F9を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung LE70F9の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung LE70F9に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung LE70F9デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。