SamsungメーカーMD65Cの使用説明書/サービス説明書
ページ先へ移動 of 268
LFD DISPLA Y User Manual The colour and the appearance ma y differ depending on the product, and the specifications are subject to change without prior notice to improv e the performance.
T able of con ten ts Before U sing the P roduct Cop yright 7 Safety Precautions 8 Symbols 8 Cleaning 8 Storage 9 Electricity and S afety 9 Installation 10 Operation 12 Pr eparations Checking the Conte.
T able of con tents Screen Adjustment 75 Advanced f eatures 78 Sound Adjustment 80 System Setup 80 T ool Settings 89 Other Functions 92 Group Management 93 Schedule Management 95 T roubleshooting Guid.
T able of con tents E co Solution 138 Energy Saving 138 E co Sensor 138 No Signal P o wer O ff 138 A uto P ower Off 138 Security 139 Safety Lock 139 Button Lock 139 Change PIN 139 PIP 140 A uto Protec.
T able of con tents Playing a Video 171 Photos 172 Viewing a Photo (or Slide Sho w) 172 Music 173 Playing Music 173 Videos / Phot os / Music Play Option menu 174 Supported Subtitle and AllShare Play f.
Prev ention of Afterimage Burn-in 265 Licence 267 T erminology 268 T able of con tents 6.
7 Befor e Using the P r oduc t Chapter 01 C opyright The contents of this manual are subject to change without notice to impr ove quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual . Use or reproduction of this manual in parts or entirety without the authorization of Samsung Elec tronics is prohibited .
8 Safety Pr ecautions Caution RISK OF ELEC TRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELEC TRIC SHOCK , DO NOT REMOVE COVER. (OR BA CK ) THERE ARE NO USER SER VICEABLE P ARTS INSIDE. REFER ALL SER VICING TO QU ALIFIED PERSONNEL. This symbol indicates that high voltage is pr esent inside.
9 Stor age Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecoloured stains on the pr oduct. ― Contact Customer Service Centre if the inside of the product needs cleaning (ser vice fee will be charged).
10 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord pr ovided with your product by Samsung. Do not use the power cord with other pr oduc ts. • A fire or electric shock may result.
11 Do not install the product on an unstable or vibrating sur face (insecure shelf , sloped sur face, etc.) • The product may fall and become damaged and/or cause an injury. • Using the product in an area with excess vibration ma y damage the product or cause a fire.
12 Operation W arning There is a high voltage inside the pr oduc t. Never disassemble, repair or modify the product yourself . • A fire or electric shock may result. • Contact Samsung Customer Service Centre for repairs. ! Before mo ving the product, turn off the power switch and disconnect the power cable and all other connected cables.
13 ! Do not use or keep combustible spray or an inflammable substance near the product. • An explosion or fire may r esult. Ensure the vents ar e not blocked by tablecloths or cur tains.
14 ! Rest your eyes for mor e than 5 minutes for ever y 1 hour of product use. • Eye fatigue will be relieved . Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. ! Store small accessories out of the reach of childr en.
15 P repar ations Chapter 02 Checking the Cont ents Removing the P ack aging ― The following images ar e for refer ence only . R eal-life situations may diff er from what is shown in the images. 1 2 Remove the black locking device at the bottom of the box.
16 - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may diff er from the image shown. - A stand is not provided with the product. T o install a stand, you can purchase one separately .
17 Items sold separately - The following items can be pur chased at your nearest retailer . W all-mount Kit Stand RS232C-Stereo cable ( P. 64 ) DVI cable ( P. 46 ) HDMI-DVI cable ( P. 46 ) DP cable ( P. 47 ) HDMI cable ( P. 47 ) Video cable ( P. 51 ) Ster eo cable ( P.
18 External sensor K it ( P. 26 ) RS232C(IN) adapter RS232C(OUT ) adapter LAN cable DP-DVI cable (Used to connect a network box) Network Box PIM.
19 P ar ts C ontrol P anel ON P anel Key Speaker Remote sensor POWER ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality . P anel Key Buttons Description Po wer on the product.
20 ― If you press the butt on on the panel k ey ( P. 19 ) when the product is turned on, the control menu will be displayed . Con trol menu CONTENT Return Buttons Description So urce Select the connected input source. Move the panel key right to select S ource in the control menu.
21 Reverse Side ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality .
22 Assembling the Holder- Wir e stand.
23 - Remote control button functions may differ for diff erent products. Remote C ontrol ― Using other display devices in the same space as the remote contr ol of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product.
24 TOOLS INFO MagicInfo 3D LOCK PC A DVI B HDMI C DP D EXIT RETURN Display information about the current input source. Move to the upper , lower , left or right menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu.
25 Adjusting the OSD with the Remote C ontrol Buttons Description 1 Open the OSD menu. 2 Select from Picture , Sound , Network , Syste m or Support in the displayed OSD menu screen. 3 Change settings as desired. 4 F inish setting. 5 Close the onscreen display (OSD) menu .
26 C onnection Using an IR Stereo C able (sold separat ely) T urn off the de vice before connecting the External Sensor Kit. After it is connec ted, turn on the device.
27 Befor e I nstalling the Pr oduc t (Installation Guide) 15 ˚ T o prevent injury, this apparatus must be secur ely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount.
28 A B C E Figur e 1.3 Side view D D Figur e 1.2 Side view Installation on an Indented W all ― Contact Samsung Customer Service Centre for further details.
29 Installing the W all Mount 1 Pr eparing before installing W all-Mount T o install a wall-mount from another manufacturer , use the Holder-Ring( 1 ). Installing the W all Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall.
30 W all Mount Kit Specications ( VESA) ― Install your wall mount on a solid wall perpendicular to the floor . Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer f or additional information. If you install the product on a slanted wall, it may fall and result in sev ere personal injur y .
31 Remote C ontrol (RS232C) Cable C onnec tion RS232C Cable Interface RS232C (9 pins) Pin T xD (No.2), RxD (No.3), GND (No .5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow c ontro.
32 • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 1 5 9 6 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- F emale Rx Tx Gnd 2 3 5 --------> <-------- ---------- 3 2 5 Tx Rx Gnd STEREO PL UG (3.
33 • Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 RJ45 MDC HUB P1 P1 P2 P2 Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ T X- 2 <--------> 2 T X- RX+ 3 <--------> 3 RX+ R X- 6 &.
34 C onnection • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 RJ45 RJ45 • Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT.
35 C ontrol C odes V iewing control stat e (Get c ontrol command) Header Command ID Data length Checksum 0xAA Command type 0 Con trolling (Set contr ol command) Header Command ID Data length Data Checksum 0xAA Command type 1 V alue Command N o.
36 P ower con trol • F unc tion A product can be powered on and off using a PC. • Viewing power state ( Get Pow er ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting p.
37 Input source c ontrol • F unc tion The input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x.
38 Screen mode contr ol • F unc tion The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the V ideo Wall function is enabled.
39 PIP On/Off control • F unc tion The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if V ideo Wall is set to On . ― This function is not available in MagicInfo .
40 V ideo W all Mode Control • F unc tion Video W all mode can be activated on a product using a PC. This control is only available on a pr oduc t whose Video W all is enabled.
41 V ideo W all On • F unc tion T urn Video Wall on or off on the pr oduc t from your computer . • Get Video W all On/Off Status Header Command ID Data length Checksum 0xAA 0x84 0 • Set Video W all On/Off Header Command ID Data length Data Checksum 0xAA 0x84 1 V .
42 10x10 V ideo W all M odel 123456789 10 11 12 13 14 15 O 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0.
43 W all_SNo: Pr oduc t Number code assigned to the product 10x10 Video W all Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ... 99 0x63 100 0x64 • Ack Header C ommand ID Data length Ack/Nak r.
44 C onnec ting and Using a Sourc e Device Chapter 03 Befor e Connecting Check the following bef ore you connect this product with other devices. Devices that can be connec ted to this product include PCs, camcorders , speak ers, set top box es and DVD/Blu-ray Disc players.
45 C onnec ting to a PC • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC.
46 C onnection using a DVI cable (Digital t ype) DVI IN / MA GICINFO IN RGB / DVI / HDMI / A V / COMPONENT / A UDIO IN C onnection Using an HDMI-DVI Cable ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC.
47 C onnection Using an HDMI Cable HDMI IN 1, HDMI IN 2 C onnection Using an DP Cable • Pr ecautions for using DP ― T o increase the standby po wer capacity , the product stops DP communication when it is turned off or in power-saving mode .
48 Changing the Resolution ― Adjust the resolution and r efresh rate in Control P anel on your PC to obtain optimum picture quality. ― The picture quality of TFT-L CDs may degrade if the optimum r esolution is not selected. Changing the Resolution on W indow s XP Go to Contr ol Panel Display Settings , and change the resolution.
49 Changing the Resolution on W indow s 7 Go to Contr ol Panel Display Screen Resolution , and change the resolution. Changing the Resolution on W indow s 8 Go to Settings Control Panel Display Screen Resolution , and change the resolution.
50 C onnec ting an Ex ternal Monitor ― Connecting par ts may differ in diff erent products. DP OUT DP IN.
51 C onnec ting to a V ideo Device • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • Y ou can connect a video device to the product using a cable. ― Connecting par ts may differ in diff erent products.
52 C onnection Using the component C able A V IN / COMPONENT IN RGB / DVI / HDMI / A V / COMPONENT / AUDIO IN C onnection Using an HDMI-DVI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable.
53 C onnection Using an HDMI Cable Using an HDMI cable or HDMI to DVI C able (up to 1080p) • F or better pic ture and audio quality , connec t to a digital device using an HDMI cable. • An HDMI cable supports digital video and audio signals, and does not require an audio cable .
54 C onnec ting to an Audio S ystem ― Connecting par ts may differ in diff erent products. A UDIO OUT.
55 C onnec ting the net work bo x (Sold separat ely) ― F or details on how to connect to a net work box, ref er to the user's manual provided with the network box upon purchase. MagicInfo T o use MagicInfo , a network box (sold separately) must be connected to the product.
56 MagicInfo Setup Wizard - v .1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: Subnet mask: Default gateway: 192 . 168 . 0 . 102 255 . 255 . 255 . 0 192 . 168 . 0 . 1 Obtain DNS server address automatically Use the following DNS server address: Preferred DNS server: Alternate DNS server: 10 .
57 MagicInfo Setup Wizard - v .1.12 Select Screen T ype - step 4 Landscape Portrait < Back(B) Next(N) > Finish Cancel 6 Select a display mode. MagicInfo Setup Wizard - v .1.12 Setup Information 1. Application : MagicInfo Pro [LAN,WAN based version 2.
58 P lug In M odule T o use Plug In Module , make sure you connect a Samsung PIM (sold separately). T o connect a device made by another manufacturer , ensure the device is compatible with Open Pluggable Specification (OPS) standards. ― F or details on how to connect a de vice, ref er to the user manual provided with the PIM upon purchase.
59 Changing the Input sourc e S ou rce MENU m → Support → Contents Home → Source → ENTER E Source HDMI1 HDMI2 DisplayPort PC DVI Intel® WiDi PC PC --- --- --- AV Component --- --- T ools Return - The displayed image may diff er depending on the model.
60 W iD i Connection 1 F rom the Source screen, select Intel® WiDi . 2 On your desktop , launch I ntel ® WiDi ( ). ― As soon as the programme starts, it searches f or available adapters. 3 Select the correct adapter for the programme and pr ess "Connect" .
61 U sing MDC Chapter 04 C onguring S ettings for M ulti C ontr ol MENU m → Syste m → Multi Control → ENTER E Assign an individual ID to y our product. C onguring settings for M ulti C ontrol • ID Setup Assign an ID to a set. (Range: 0~99) Pr ess ▲ / ▼ to selec t a number , and press E .
62 • DisplayP or t daisy chain T o display the DP IN video input through the DP OUT output por t, selec t a device connection method from Single Stream Transport (SST ) and Multi Stream T ranspor t (MST ). Clone : In this Single Stream Transport (SST ) output mode, the same screen output is displayed on two display devices connected.
63 MDC Pr ogramme Installation/Uninstalla tion Installation 1 Inser t the installation CD into the CD-R OM drive. 2 Click the MDC Unified installation programme .
64 Wha t is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. C onnecting to MDC Using MDC via RS-232C (serial data communica tions standards) An RS-232C serial cable must be connected to the serial por ts on the PC and monitor .
65 Using MDC via Ethernet Enter the IP for the primary display device and connect the de vice to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 por t on the product and the LAN por ts on the HUB.
66 Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT por t on the product. RS232C OUT RJ45 Monitor 1 Monitor 2 Computer.
67 C onnection M anagement Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MA C, and Connection T ype), connection status, Set ID Range , and detected devices.
68 U ser L ogin Launching the programme displays the user log in window. The initial login ID ( passwor d : admin ) and password ( Auto Log in : admin ) are set to admin . ― After logging in for the first time , mak e sure to change the passwor d to ensure security .
69 A u to S et ID Auto Set ID f eature assigns a Set ID f or all the LFDs connected in daisy-chain of a selec ted connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 t o 99, and then finally to Set ID 0.
70 Cloning Using the Cloning featur e, you can copy the setting of one LFD and apply it t o multiple selected LFDs. Y ou can select specific tab categories or all tab categories for cloning, using the copy setting option window . ― T o delete the settings you hav e configured, click the Paste Settings button.
71 C ommand Retr y This featur e is used to specify the maximum number of times the MDC command will be retried in case of there being no r eply or a cor rupted reply from an LFD . The retry count value can be set using the MDC options window. The retry count value must be between 1-10.
72 Getting Star ted with MDC 1 T o start the programme, click Start → Programs → Samsung → MDC Unified . The login window appears after the MDC prog ramme is launched. Enter the user ID and password . • The default user ID and password ar e admin .
73 Main Screen Lay out 4 3 2 1 6 5 1 Menu Bar Change the status of a display device or the properties of the programme. 2 Device Cat egor y View a list of connected display devices or device groups . 3 Schedule Category View a list of schedules for display devices .
74 V olume 1 2 3 ― The volume can be changed or the sound can be muted only f or displays that are turned on. V olume • Adjust the volume of a selected display . • The volume can be adjusted using the slider bar in the range of 0 to 100. Mute • Enable or disable Mute for a selected display .
75 User L ogin User Settings • Add, delete or edit log in information. Logout • Log out fr om the current user account as follows . • Click Logout . The message " Do you want t o log admin out? " is displayed • Click Ye s . The user login window appears.
76 Color - Color and T int (G/R) ar e not available if the input source is PC . - C olor , T int ( G/R) , C olor T one and C olor T emp . ar e not available if both PC S ource and V ideo S ource are selected. Color • Adjust the colours for the selected display device .
77 MPEG Noise Filt er Reduces MPEG noise to provide impr oved picture quality . • Off / Low / M edium / High / Aut o Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bott om areas of the video image to pr ovide a more immersive viewing experience.
78 Adv anced featur es 3D Con trol 3D M ode Select the 3D input format. 3D L/ R C hange Swap the left and right pictures. 3D → 2D Displays the image for the left eye only . 3D A uto V iew If you set 3D Auto V iew to Message Notice , a pop up message window appears when the product receives a 3D sig nal.
79 Advanc ed Settings D ynamic C ontrast Adjust the screen contrast. G amma C ontrol Adjust the primary colour intensit y . RGB O nly M ode Displays the Red , Green and Blue colour for making fine adjustments to the hue and saturation. F lesh T one Emphasize pink “Flesh T one.
80 Sound Adjustment - The Bass or T reble item will be disabled if the item is not supported by the selected set. Y ou can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. B ass • Adjust the bass for the selected display .
81 F ormat • Select the format to display the split screen. Full Natural H • Select the number of horizontal display devices. • A maximum of 15 displays can be arranged in a row . ― A maximum of 6 can be assigned to V if 15 is assigned t o H .
82 General User A uto Color • Automatically adjust the screen colours . ― Available only in PC mode. Auto P ower • Set the product to automatically power on. Standby C ontrol • Set the standby mode to activate if an input source is not detected.
83 Security Safety Lock • Lock the on-scr een menus. ― T o unlock the menus, set Safety Lock to Off . Button Lock • Lock the buttons on the displa y device. ― T o unlock the buttons, set Butt on Lock to Off . OSD Display Source OSD • Select whether to display a message when the So urce is changed.
84 Time C lock S et Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer O n T imer • Repeat : Specify the period for which you want to r epeat the selec ted Timer .
85 Holiday Management Holiday Management allows you t o prevent devices that are set t o be powered on b y the Timer fr om turning on at a specified date. ― The Holiday Management function can be enabled or disabled in the Timer settings menu . • Add : Y ou can specify holidays.
86 S creen S aver ― Period (Hour) and T ime (Sec) can be configured when Repeat is selected. ― Start Time and End Time can be configur ed when Inter val is selected. This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time.
87 S afety S creen The Saf ety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. L amp C ontrol Lamp Control is used t o adjust the back light to reduce power consumption.
88 Tick er I nput text while a video or image is displayed and display the text on the screen. Ticker Enable or disable Ticker . • Off / On Message Enter a message to display on the scr een. Timer Set the Start Time and End Time to display a message ( Message ).
89 T ool Settings Security • Panel C ontrol : Turn on or off the screen of a display device . • Remote Contr ol : Enable or disable the remote control. Reset • Reset Picture : Reset the screen settings. • Reset Sound : Reset the sound settings.
90 Edit C olumn O ptions Configure the settings f or the items that will be displayed on the list of displays. • Language : Select a language to use in the MDC programme. After selecting a language, r estart the MDC programme to use the selected language.
91 M onitor W indow A window appears showing details for data transfer between the computer and displa y de vices. • Filt er View the programme inf ormation.
92 Other F unctions Resizing a Window Place the mouse pointer on a corner of the programme windo w. An arrow will appear . Move the arrow to customiz e the size of the programme window .
93 Group Management Creating Gr oups Create gr oups and manage the list of sets on a group basis. ― Duplicate group names cannot be used . 1 Right-click and selec t Group Edit in the display device list section on the lef t side of the programme window .
94 • Add on the sub lev el : Create a sub-group under the selected group . 3 Enter the group name . Deleting Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Delet e . 3 Click Ye s . The group will be deleted.
95 Renaming Groups Rename 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Rename . 3 If a cursor appears in the old group name, enter a new gr oup name. Schedule Management Creating Schedules Create and r egister a schedule on a gr oup basis.
96 2 Click the Add button. The Add Schedule window will appear . 3 Click Add below the Device Group item, and select the group you want to add a schedule t o. 4 Select Date&Time / Action and click OK . The schedule will be added and a list of schedules will appear in the set list window .
97 T roubleshooting Guide - This programme may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted fr om nearby electronic devices. Issue Solution The display y ou want to control does not appear on the system inf ormation chart.
98 How display pr oper ties are shown when multiple display s are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displa yed. 3 When two displays are selected (e.
99 Screen A djustment Configure the Picture settings ( Backlight , Colour T one , etc.). - The layout of the Picture menu options may vary depending on the product. Chapter 05 P ic ture M ode MENU m → Picture → Picture Mode → ENTER E Select a picture mode ( Picture Mode ) suitable for the environment wher e the product will be used.
100 B acklight / C ontrast / B rightness / S harpness / C olour / T int ( G/ R) MENU m → Picture → ENTER E · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Colour Tint ( G/R) Information 60 70 45 50 50 G 50 R 50 - The displayed image may diff er depending on the model.
101 S cr een A djustment MENU m → Picture → Screen Adjustment → ENTER E · · Screen Adjustmen t Picture Size Custom 16:9 Zoom/P osition 4:3 Screen Size PC Screen Adjustment Resolution Selec t O - The displayed image may diff er depending on the model.
102 Picture Sizes a vailable by Input Source. Input Source Picture Size AV , C o mponent (480i, 480p) 16:9 , Zoom1 , Zoom2 , 4:3 , C ustom C o mponent (1080i, 1080p) 16:9 , Wide F it , Screen Fit , 4:.
103 P osition · · Screen Adjustmen t Picture Size P osition PC Screen Adjustment Resolution Selec t Zoom1 16:9 O 4:3 Screen Size - The displayed image may diff er depending on the model. Adjusts the picture position. P osition is only available if Picture Size is set to Zoom1 , Z oom2 , Wide Fit , Screen F it or Custom .
104 4:3 S creen S i ze · · Screen Adjustmen t Picture Size Zoom/P osition PC Screen Adjustment 4:3 Screen Size Resolution Selec t Custom 16:9 O - Available in PC mode only . - The displayed image may diff er depending on the model. Available only when picture size is set t o Auto W ide .
105 R esolution S elect · · Screen Adjustmen t Picture Size Zoom/P osition PC Screen Adjustment Resolution Selec t Custom 16:9 O 4:3 Screen Size - Available in PC mode only .
106 R ota tion MENU m → Picture → Rotation → ENTER E · Picture Rotation Aspect Ratio P ortrait F ull Screen - The displayed image may diff er depending on the model. Rotate the product screen orientation. • Landscape : Display the screen in landscape mode (default).
107 A dvanced S ettings MENU m → Picture → Advanc ed S ettings → ENTER E Advanc ed S ettings Dynamic Contrast Black T one Flesh T one RGB Only Mode Colour Space White Balance 10p White Balance Medium O 0 O Native O - The displayed image may diff er depending on the model.
108 Advanc ed S ettings Dynamic Contrast Black T one Flesh T one RGB Only Mode Colour Space White Balance 10p White Balance Medium O 0 O Native O - The displayed image may diff er depending on the model. D ynamic C ontrast Adjust the screen contrast.
109 Advanc ed S ettings White Balance 10p White Balance Gamma Exper t P attern Motion Lighting O 0 O O - The displayed image may diff er depending on the model. W hit e B alance Adjust the colour temperature f or a more natural picture. • R-Offset / G- Offset / B- Offset : Adjust each colour ’ s (red, gr een, blue) dar kness.
110 Advanc ed S ettings White Balance 10p White Balance Gamma Exper t P attern Motion Lighting O 0 O O - The displayed image may diff er depending on the model.
111 P ic ture O ptions MENU m → Picture → Picture Options → ENTER E Picture Options Colour T one Colour T emp . Digital Noise F ilter MPEG Noise F ilter HDMI Black Lev el F ilm M ode Motion Plus Standard 10000K O O Normal O O - The displayed image may diff er depending on the model.
112 Picture Options Colour T one Colour T emp . Digital Noise F ilter MPEG Noise F ilter Standard 10000K O O - The displayed image may diff er depending on the model. C olour T one If the input source is PC , DVI , DisplayPort or HDMI1 (PC connection), HDMI2 (PC connection).
113 Picture Options HDMI Black Lev el F ilm M ode Motion Plus Dynamic Back light Normal O O O - The displayed image may diff er depending on the model.
114 Picture Options HDMI Black Lev el F ilm M ode Motion Plus Dynamic Back light Normal O O O - The displayed image may diff er depending on the model. D ynamic B acklight Automatically adjust the backlight to provide the best possible screen contrast under the curr ent conditions.
115 Sound Adjustmen t Configure the sound ( Sound ) settings for the pr oduc t. Chapter 06 S ound M ode MENU m → Sound → Sound Mode → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model.
116 S ound E ec t MENU m → Sound → Sound Effect → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. Configure your pr eferred sound effect for output sound. ― If Speaker Selec t is set to External , Sound Effect is disabled.
117 S peak er S ettings MENU m → Sound → Speaker Settings → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model.
118 R eset S ound MENU m → Sound → Reset Sound → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model.
119 N et work Chapter 07 C onnecting to a W ired Netw ork There are thr ee ways to attach your product to your LAN using cable. • Y ou can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable.
120 • Depending on how your network is configured, you ma y be able to attach your product to your LAN b y connec ting the LAN por t on the back of your product directly to a network wall outlet using a LAN cable. See the diagram below . Note that the wall outlet is attached to a modem or router elsewhere in your house .
121 W ired Network Settings Set the network connec tion to use Internet ser vices such as per form software upgrades. Aut omatic Network Settings Connect to the network using a LAN cable. Make sure a LAN cable is connected first. How to set up automa tically 1 Go to the Network Settings screen.
122 Manual Network Settings Offices may use static IP addresses. If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually . Getting the Network Connection V alues T o view the Network connection values on most Windo ws computers, f ollow these steps.
123 C onnecting to a W ireless Netw ork T o connect your product to your network wireless, y ou need a wireless router or modem and a Samsung Wireless LAN adapter ( WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port.
124 W ireless Network Setting Aut omatic Network Setup Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted securit y code called an Access or Security Key .
125 Manual Network Setup Offices may use static IP addresses. If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually . Getting the Network Connection V alues T o view the Network connection values on most Windo ws computers, f ollow these steps.
126 How to set up manually 1 Go to the Network Settings screen. Select Start , press E . 2 The Network function searches for a vailable wireless networ ks. When done, it displays a list of the available networks. 3 In the list of networks, press the or button to select a network, and then press the E button twice.
127 WPS ( PBC ) How to set up using WPS(PBC ) If your router has a WPS(PBC) button, follow these st eps. 1 Go to Network Settings screen. 2 Select WPS(PBC ) , press E , and then press E again. 3 Pr ess the WPS(PBC ) button on your router within 2 minutes .
128 N etw ork S tatus MENU m → Network → Network Status → ENTER E Network Status Y our wireless network and Internet connection are setup and ready to use. Y ou are connected to the Internet. If you have any problems using online services, please contact your Internet service provider .
129 W i -F i D ir ec t MENU m → Network → W i-Fi Dir ect → ENTER E Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a rout er . - T o use this function, your mobile device should be supported by the Wi-Fi Direct .
130 S oft AP MENU m → Network → Soft AP → ENTER E Using this function, you can connect the product on your mobile devices if your mobile devices do not suppor t Wi-F i Direc t . Set the options for connection of Wi-Fi device. • Soft AP T urns on or off the S oft AP .
131 A ll S hare S ettings MENU m → Network → AllShare Settings → ENTER E Shows a list of mobile phones or connected devices which have been set up to use the AllShar e Play function with this product. • Allow / Den y : Allows/Blocks the devices.
132 S y stem Chapter 08 M ulti C ontrol MENU m → Syste m → Multi Control → ENTER E Multi Contr ol ID Setup ID Input MDC Connection DisplayP or t daisy chain 00 -- RS232C MDC Clone - The displayed image may diff er depending on the model. C onguring settings for M ulti C ontrol • ID Setup Assign an ID to a set.
133 T ime MENU m → Syste m → Time → ENTER E 끄기 Time Clock Set Sleep Timer On Timer O Timer Holiday Management O - The displayed image may diff er depending on the model. Y ou can configure Clock Set or Sleep Timer . Y ou can also set the product to automatically turn on or off at a specified time using the Timer function.
134 Time On Timer O Timer Holiday Management - The displayed image may diff er depending on the model. On T imer Set On Timer so that your pr oduct turns on automatically at a time and on a day of your choosing. The power is turned on with the specified volume or input source .
135 Time On Timer O Timer Holiday Management - The displayed image may diff er depending on the model. O T imer Set the off timer ( Off Timer ) by making a selec tion from one of the seven options. ( Off T imer1 ~ O ff Timer7 ) ― Y ou must set the clock before y ou can use Off Timer .
136 M enu L anguage MENU m → Syste m → Menu Language → ENTER E Time Menu Language Rotate menu Eco Solution English Landscape System - The displayed image may diff er depending on the model. Set the menu language. ― A change to the language setting will only be applied to the onscreen menu displa y .
137 R otate menu MENU m → Syste m → Rotate menu → ENTER E System Time Menu Language Rotate menu Eco Solution English Landscape - The displayed image may diff er depending on the model. Configure the menu scr een. • Landscape : Display the menu in landscape mode (default).
138 E co S olution MENU m → Syste m → Eco Solution → ENTER E Eco Solution Energy Saving Eco Sensor No Signal P ower O Auto P ower O O O O O - The displayed image may diff er depending on the model. E nergy S aving Reduce the power consumption by adjusting the screen brightness.
139 S ecurity MENU m → Syste m → Security → ENTER E Securit y Safety Lock Button Lock Change PIN O O - The displayed image may diff er depending on the model. Every time you access the Security func tions, the PIN screen will appear and the default PIN number is "0-0-0-0" (default password: 0 - 0 - 0 - 0).
140 PIP MENU m → Syste m → PIP → ENTER E System PIP Auto Pr otec tion Time Screen Burn Pr otec tion Ticker Video W all O O O - The displayed image may diff er depending on the model. - F or PIP sound, r efer to the S ound S elect instructions.
141 A uto P r otection T ime MENU m → Syste m → Auto Protection Time → ENTER E System Auto Pr otec tion Time Screen Burn Pr otec tion Ticker Video W all Source A utoSwitch Settings O O - The displayed image may diff er depending on the model.
142 S cr een B urn P rot ec tion MENU m → Syste m → Screen Burn Protection → ENTER E Screen Burn Pr otec tion Pix el Shif t Timer Immediate display Side Grey O O O O - The displayed image may diff er depending on the model.
143 Screen Burn Pr otec tion Pix el Shif t Timer Immediate display Side Grey O O O O - The displayed image may diff er depending on the model. T imer Y ou can set the timer for Screen Burn Pr otec tion . The Pix el Shif t feature stops aut omatically af ter a specified period of time.
144 Screen Burn Pr otec tion Pix el Shif t Timer Immediate display Side Grey O O O O - The displayed image may diff er depending on the model.
145 T icker MENU m → Syste m → Ticker → ENTER E System Auto Pr otec tion Time Screen Burn Pr otec tion Ticker Video W all Source A utoSwitch Settings O O - The displayed image may diff er depending on the model. Input text while a video or image is displayed and display the text on the screen.
146 V ideo W all MENU m → Syste m → Video W all → ENTER E · · · · Video W all Video W all F ormat Horizontal V er tical Screen P osition On F ull 1 1 - The displayed image may diff er depending on the model. - The V ideo W all option is only enabled when PIP is set t o O .
147 · · · · Video W all Video W all F ormat Horizontal V er tical Screen P osition On F ull 1 1 - The displayed image may diff er depending on the model. V er tical This function automatically divides the screen according to the specified number of v er tical displays.
148 S ou rce A uto S witch S ettings MENU m → Syste m → Source AutoS witch Settings → ENTER E · · · Source A utoSwitch Settings Primary Source Recovery Primary Source Secondar y Source Source Aut oSwitch On O All PC - The displayed image may diff er depending on the model.
149 G ener al MENU m → Syste m → General → ENTER E General Max. Po wer Saving Game Mode BD Wise Menu T ransparency Sound F eedback Auto P ower Standby Con trol On O On Medium Low O Auto - The displayed image may diff er depending on the model.
150 General Sound F eedback Auto P ower Standby Con trol Lamp Schedule OSD Display P ower On A djustment T emperature Con trol Low O Auto O 0 Sec 77 - The displayed image may diff er depending on the model. S ound F eedback Y our product gives sound feedback when y ou use product.
151 General Sound F eedback Auto P ower Standby Con trol Lamp Schedule OSD Display P ower On A djustment T emperature Con trol Low O Auto O 0 Sec 77 - The displayed image may diff er depending on the model. L amp S chedule Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode .
152 A nynet + (HDMI - CEC ) MENU m → Syste m → Anynet+ (HDMI-CEC) → ENTER E Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto T urn O Receiver On Ye s O - The displayed image may diff er depending on the model. - The A nynet + functions do not operate with other manufacturers’ products.
153 Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto T urn O Receiver On Ye s O - The displayed image may diff er depending on the model. A u to T urn O Setting an Anynet+ Device to turn Off automatically when the product is turned off.
154 T roubleshooting for A nynet+ Pr oblem P ossible S olution Anynet+ does not w ork . • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only . • Check if the Anynet+ device power cor d is properly connected.
155 Pr oblem P ossible S olution The connected device is not displayed . • Check whether or not the device suppor ts Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu .
156 D iv X ® V ideo O n D emand MENU m → Syste m → DivX® V ideo On Demand → ENTER E System DivX® Video On Demand - The displayed image may diff er depending on the model.
157 Export the product settings to a USB device or load the settings via a USB de vice. This option is useful when assigning the same settings to several pr oduc ts. • Clone to USB : Copy the pr oduc t settings to a USB device. • Clone Fr om USB : Assign the settings saved in a USB device to the product.
158 R eset A ll MENU m → Syste m → Reset All → ENTER E System Reset All - The displayed image may diff er depending on the model. This option returns all the current settings for a displa y to the default fac tory settings.
159 S uppor t Chapter 09 S oft ware U pdate MENU m → Support → S oftware Update → ENTER E The Software Update menu lets you upgrade your pr oduc t software to the latest version. ― Be careful not to turn off the power until the upgrade is complet e.
160 C ontact S amsung MENU m → Support → Contact Samsung → ENTER E View this information when your pr oduc t does not work properly or when you want to upgrade the software. Y ou can find information regarding our call C entres and how to download products and software.
161 C onten ts H ome MENU m → Support → Contents Home → ENTER E Suppor t Conten ts Home - The displayed image may diff er depending on the model. M agic I nfo L ite MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ― MagicInfo Lite can also be accessed by pressing MagicInf o Lite/S on the remote control.
162 - The input source can also be changed by using the SOURCE button on the remote control . A ll S hare P lay MENU m → Support → Contents Home → AllShare P lay → ENTER E Enjoy videos, photos , music files saved on a USB Mass Storage Class (MSC ) device.
163 A ll S hare P lay Chapter 10 Wha t is A ll S hare P lay ? Play photo , video or music files saved on a storage device. Wirelessly connect a smar tphone to a PC using a wireless network.
164 Compa tible devices with AllShare P lay • Some types of USB devices, digital cameras and audio devices may not be compatible with the product. • AllShare Pla y is only compatible with USB MSC devices. • MSC device refers t o a Mass Storage Class Bulk-Only Transport device.
165 Using a USB devic e Connecting a USB device 1 T urn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 A message New device connected. appears when the USB device is connected properly .
166 C onnecting to a PC over a netw ork Play photo , video and music files saved on a PC through a network connection in AllShare Play mode. • F or details on how to configure a network , refer to the section Network Settings . • T o view content saved on the PC, connect the product and PC to the same wir eless router and visit http://www .
167 Using the A ll S hare P lay featur es If you connect the product and a source device such as a cell phone or PC to the same network , you can play media content saved on the device such as videos , photos and music. Visit http://www.samsung .com or contac t the Samsung Electronics Customer Centr e for more information.
168 Using the Basic A ll S har e P l ay F eatur es MENU m → Support → Contents Home → AllShare P lay → ENTER E AllShare Play / My List / Recently Played What's new Playlist Recently played les will be displayed here. No playlists have been created.
169 Playing Selected F iles 1 Select files from the list of Videos , Photos , or Music files . 2 Pr ess TOOLS on the remote contr ol and select Play selection . ― The option does not appear if a folder is highlighted b y the cursor . 3 Select files and press Play .
170 My list MENU m → Support → Contents Home → AllShare P lay → My list → ENTER E Access desired content mor e conveniently and quickly. T o play files, select files or a Playlist and pr ess E . • Recently play ed : Display video, photo or music files that were r ecently played.
171 V ideos MENU m → Support → Contents Home → AllShare P lay → V ideos → ENTER E Playing a Video 1 Select the internal memor y or a USB device. Selec t files from the list of files. 2 Pr ess the E button or ∂ (Play) button. • The file name appears on the top with its playing time.
172 P hotos MENU m → Support → Contents Home → AllShare P lay → Photos → ENTER E V iewing a Photo (or Slide Show) 1 Select the internal memor y or a USB device. Selec t a file from the list of files. 2 Pr ess the E button. • T o view files manually , one at a time, press the left or right arrow buttons.
173 M usic MENU m → Support → Contents Home → AllShare P lay → Music → ENTER E Playing M usic 1 Select the internal memor y or a USB device. Selec t files from the list of files. 2 Pr ess the E button or ∂ (Play) button. • When the music is playing, you can sear ch using the π (RE W ) and µ (FF) button.
174 V ideos / P hotos / M usic Pla y Option menu When playing video or photo files, y ou can press the T OOLS button to display an Options menu. Option Name Operations V ideos Photos Music V i ew Sor t music files grouped by F older view , Title , Artist , Album or Genre .
175 Option Name Operations V ideos Photos Music So und Mo de Y ou can change the Sound Mode . c c A u dio La nguage Y ou can enjoy video in one of supported languages. The function is enabled only when you play stream-type files which support multiple audio formats.
176 Suppor ted Subtitle and AllShar e Pla y le forma ts Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.sr t) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.
177 Suppor ted music le forma ts F ile Extension T ype Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek ( jump) function is not suppor ted.
178 F ile Extension Con tainer V ideo Codec Resolution Frame r ate (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DIVX 3.
179 M ag ic I n fo L i te Chapter 11 F ile F ormats C ompatible with M agic I nfo L ite pla yer Read befor e using M agic I nfo L ite play er • The file system supports F A T16, F A T32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played .
180 Con tents F ile Extension Container V ideo Codec Resolution Fr ame rate (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DIVX 3.
181 V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback.
182 Flash P ower P oint • Compatible with Flash 10.1 • Flash Animation - Compatible file format : SWF • Recommended resolution : 960 x 540 - Caution Performance comparable to Flash P layer on a .
183 PDF WORD • Compatible document file formats - Extension : pdf • F unc tions not supported - Content less than 1 pixel not supported because of per formance degradation issue. - Masked I mage, Tiled Image content not suppor ted. - Content with Rotated T ext, not suppor ted.
184 Appr oving a connected device fr om the ser ver 1 Access the server you have assigned to y our device. 2 Enter your ID and passwor d to log in. 3 Select Device from the top menu bar . 4 Select Lite from the menus on the left. 5 Select Unapproved from the sub-menus of Lite .
185 7 Enter the information requir ed to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule.
186 M agic I n fo L ite MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ― T o launch MagicInfo Lite , select MagicInfo Lite f or the Play Mode on the Sys tem .
187 Local schedule MagicInfo Lite player Network schedule Local schedule Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close Go to Local Schedule Manager → Click Create to create a schedule → Select the schedule you want to run 1 Select Local schedule in the MagicInfo Lite play er menu screen.
188 USB Device A u to P lay MagicInfo Lite player Network schedule Local schedule Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close ― The option is enabled only when there is at least one content item, ex cept for music files, in the " MagicInfoSlide " f older on USB Storage.
189 L ocal S chedule M anager Configure the settings f or playback from Local schedule . Alternatively , selec t and play content from int ernal or USB memor y according to the customized playback sequence. Registering a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen.
190 4 Select Contents to specify the cont ent you want to play . 1 2 Menu1.jpg Menu2.jpg Contents Internal Memory USB No Items Folder1 OK Cancel Deselect Duration Return - A maximum of 99 content files can be selected. 5 Select Duration . Menu1.jpg 00:00:05 00:00:05 Menu2.
191 6 Select S ave . Selec t the memor y space you want to save the content t o. Menu1.jpg Menu2 --:-- am ~ --:-- pm No Item --:-- am~ --:-- pm --:-- am ~ --:-- pm No Item Create Time Contents Time Co.
192 3 Select Edit . Menu1.jpg Menu2 Edit Time Contents Time Contents --:-- am~ --:-- pm No Items Save Cancel 12:00 am~ 12:00 pm Time Contents Return Delete --:-- am~ --:-- pm No Items 4 Change the details of the local schedule. Next, select S ave . Deleting a Local schedule ― Ensure at least one Local schedule is r egistered.
193 Running a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to run.
194 V iewing the details of a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to view the details of.
195 Cop ying a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select a storage device where the local schedule files to copy are sav ed.
196 C o ntent manager Cop ying content 1 Select Content manager in the MagicInfo Lite menu scr een. MagicInfo Lite player MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to copy .
197 Deleting cont ent 1 Select Content manager in the MagicInfo Lite menu scr een. MagicInfo Lite player MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to delete.
198 S ettings Settings Server Network Settings Default content duration Content Ratio Image Eect Default content Content La yout Schedule Name Safely Remove USB Device Return Close Random None Landscape YYYYMMDD - The displayed image may diff er depending on the model.
199 Default content duration Specify the duration to play content. • Image View er Time , Doc viewing time , PPT V iewer Time , PDF V iewing time , Flash Viewing time ― The duration must be at least 5 seconds. C ontent Ratio Specify the display aspect ratio by type when playing content.
200 When C ontent is Running V iewing the details of the content that is running Information Software Version Device Name Device ID Mode Server USB Schedule download Cancel : A-L UBXGDSP -0100.
201 Changing the settings for the c ontent that is running Picture Mode Sound Mode PIP Background Music Background Music Setting Safely Remove USB Device T ools Standard Standard O O Return - The displayed image may diff er depending on the model.
202 M ag ic I n fo P remium S Chapter 12 A Licence needs to be purchased to use MagicInf o Premium S . T o download the software, go to the Samsung homepage at http://www .
203 V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback.
204 Flash P ower P oint PDF • Compatible with Flash 10.1 • Flash Animation - Compatible file format : SWF • Recommended resolution : 960 x 540 - Caution Performance comparable to Flash P layer o.
205 WORD T emplate les LFD • Compatible document file formats - Extension : .doc, .docx - Version : Office 97 ~ Office 2007 • F unc tions not supported - P age background effect - Some paragrap.
206 Network Schedule Multiframe Playback restrictions • A maximum of two video ( Videos ) files can be play ed. • If PIP mode is enabled, more than one video ( V ideos ) file cannot be played. • More than one Flash file cannot be play ed. • F or O ffice files (PPT and Word files) and PDF files, only one file type is supported at a time.
207 Playback restrictions • A maximum of two video ( Videos ) files can be play ed. • If PIP mode is enabled, more than one video ( V ideos ) file cannot be played. • More than one Flash file cannot be play ed. • F or O ffice files (PPT and Word files) and PDF files, only one file type is supported at a time.
208 Appr oving a connected device fr om the ser ver 1 Access the server you have assigned to y our device. 2 Enter your ID and passwor d to log in. 3 Select Device from the top menu bar . 4 Select Premium from the menus on the left. 5 Select Unapproved from the sub-menus of Pr emium .
209 7 Enter the information requir ed to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule.
210 M agic I n fo P remium S MENU m : T Support C ontents Home MagicInfo P remium S ENTER E ― T o launch MagicInfo Pr emium S , selec t MagicInfo Premium S f or the Play Mode on the Sys tem . ― Pr ess the M agicInfo Lite/S button on the r emote control .
211 Local schedule MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close .
212 Internal A uto P lay MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close ― The option is enabled only when there is at least one content item, ex cept for music files, in Internal Memory .
213 L ocal S chedule M anager Configure the settings f or playback from Local schedule . Alternatively , selec t and play content from int ernal or USB memor y according to the customized playback sequence. Registering a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen.
214 4 Select Contents to specify the cont ent you want to play . 1 2 Menu1.jpg Menu2.jpg Contents Internal Memory USB No Items Folder1 OK Cancel Deselect Duration Return - A maximum of 99 content files can be selected. 5 Select Duration . Menu1.jpg 00:00:05 00:00:05 Menu2.
215 6 Select S ave . Selec t the memor y space you want to save the content t o. Menu1.jpg Menu2 --:-- am ~ --:-- pm No Item --:-- am~ --:-- pm --:-- am ~ --:-- pm No Item Create Time Contents Time Co.
216 3 Select Edit . Menu1.jpg Menu2 Edit Time Contents Time Contents --:-- am~ --:-- pm No Items Save Cancel 12:00 am~ 12:00 pm Time Contents Return Delete --:-- am~ --:-- pm No Items 4 Change the details of the local schedule. Next, select S ave . Deleting a Local schedule ― Ensure at least one Local schedule is r egistered.
217 Running a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen.
218 V iewing the details of a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Pl.
219 Cop ying a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Player Content ma.
220 T emplate M anager Registering a T emplate 1 Select T emplate Manager in the MagicInfo Pr emium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select Create in the T emplate Manager screen.
221 4 Organize a templat e by inserting text, video, photo, or PDF files as desired . Crea te Select the position and the background. Use background image Preview Previous Next Cancel - T o load a file or manually enter text, select T ex t input .
222 5 Select sound or background music. Crea te Select sound or background music. Background Music Preview Previous Next Cancel • If two Videos files are assigned , selec t the file with the sound you want to use. - If one of the video files includes PIP content, sound from the PIP content can be selected.
223 C o ntent manager Cop ying content 1 Select Content manager in the MagicInfo P remium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to copy .
224 Deleting cont ent 1 Select Content manager in the MagicInfo P remium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to delete.
225 S ettings Settings Server Network Settings Default content duration Content Ratio Copy Deployed F olders Image Eect Default content Content La yout Schedule Name Return Close Manual Random None Landscape YYYYMMDD - The displayed image may diff er depending on the model.
226 Default content duration Specify the duration to play content. • Image View er Time , T emplate Display Duration , Doc vie wing time , PPT View er Time , PDF Viewing time , F lash Viewing time ― The duration must be at least 5 seconds. C ontent Ratio Specify the display aspect ratio by type when playing content.
227 When C ontent is Running V iewing the details of the content that is running Information Software Version Device Name Device ID Mode Server USB Schedule download Cancel : A-L UBXGDSP -0100.
228 Changing the settings for the c ontent that is running Picture Mode Sound Mode PIP Background Music Background Music Setting Safely Remove USB Device T ools Standard Standard O O Return - The displayed image may diff er depending on the model.
229 M ag ic I n fo V ideowall S Chapter 13 A licence needs to be purchased to use MagicInf o Video wall S . T o download the software, go to the Samsung homepage at http://www .samsunglfd.com. T o purchase a licence , contact a Customer Ser ver Centre .
230 V ideo Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback.
231 Restrictions • Only one video ( Videos ) file can be pla yed per client. ― Different cont ent files can be played on the displays of a video wall.
232 M agic I n fo V ideow all S MENU m → Support → Contents Home → MagicInfo V ideowall S → ENTER E → RETURN ― T o launch MagicInfo V ideowall S , selec t MagicInfo V ideowall S for the Play Mode on the Syste m . ― Pr ess the M agicInfo Lite/S button on the r emote control .
233 When C ontent is Running Information Software Version Device Name Device ID USB Cancel : A-L UBXGDSP -0100.18 : Monitor : FF-FF-FF-FF-FF-FF : Connected - The displayed image may diff er depending on the model. Pr ess the INFO button on the remote control.
234 T r oubleshooting Guide Chapter 14 Requirements Bef ore C ontac ting S amsung C ustomer Ser vice C entre Before calling Samsung Cust omer S er vice Centre, t est your product as follows . I f the problem persists, contact Samsung Customer Service Centre.
235 Check the follo wings. Installation issue (PC mode) The screen keeps swit ching on and o. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are f ound on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC.
236 Screen issue The screen is not clear . T he screen is blurry . Adjust Coarse and F ine . Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level . The screen appears unstable and shaky .
237 Screen issue The screen displa y does not look normal. Encoded video content may cause the display to appear corrupted in scenes f eaturing fast moving objects such as in a spor ts event or action video. Low sig nal level or low picture quality may cause the display to appear corrupted.
238 Sound issue There is no sound . Check the connection of the audio cable or adjust the volume. Check the volume. The volume is t oo low . Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software programme .
239 Sound issue There is audible sound when the v olume is muted. When Speaker Select is set to External , the volume button and mute function are disabled. Adjust the volume f or the ex ternal speakers. Audio settings for main speakers are separat e from the internal speak ers on the product.
240 Intel ® W iD i connection issue Unable to establish a WiDi connection. It is recommended using the laptop within a 3m radius of the product. Y ou may encounter a connection failure or scrambled screen in a multiple r outer environment such as an office.
241 Intel ® W iD i connection issue If you change the WiDi-based wireless LAN settings, y ou may encount er a temporary scrambled or disconnected adapter . Do not change the wireless LAN settings while in WiDi mode. If the product is too far away from the lapt op computer , the playback performance of the product will deteriorate accordingly .
242 Intel ® W iD i connection issue When I change the screen resolution, I e xperience temporary interference on the screen. If you change the screen resolution in WiDi mode, you may encount er temporary inter ference on the screen. I cannot resize the video screen on the pr oduc t with the WiDi pr ogramme on m y laptop computer .
243 Other issue There is no sound fr om the speakers in HDMI mode when a DVI-HDMI cable is connected. DVI cables do not transmit sound data. Make sure to connect the audio cable to the correct input jack to enable audio. HDMI B l ack Le vel is not functioning properly on an HDMI device with Y CbCr output.
244 Other issue In power-sa ving mode, when the input sourc e is Di spl ay P o rt , PC display settings cannot be sav ed. Go to Syste m → General and set Max. Pow er S aving to Off . Alternatively , configure the PC display output settings again. Ensure the set is turned on.
245 Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to C ontrol Panel → Appear ance and Themes → Display → Settings → Advanc ed → Monitor and adjust the frequency in Monitor Settings .
246 Question Answer How do I set pow ersaving mode? • Windows XP: Set pow er-saving mode in Control P anel → Appearance and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power -saving mode in Con trol P anel → Display → Screen Sav er Settings or BIOS SE TUP on the PC.
247 Specications Chapter 15 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name MD65C Panel Siz e 65 Class (64.5 inches / 163 cm) Display area 1428.48 mm (H) x 803.52 mm ( V ) 56.2 inches (H) x 31.6 inches ( V ) Dimensions ( W x H x D) 1467.
248 Model Name MD65C Resolution Optimum resolution 1920 x 1080 @ 60 Hz Maximum resolution 1920 x 1080 @ 60 Hz Maximum Pixel C lock 148.5 MHz (Analogue, Digital) Audio Output 10 W X 2 Po wer Supply This product uses 100 to 240V . Refer to the label at the back of the product as the standard voltage can vary in different countries.
249 [Recommendation] - EU Only • Hereby , Samsung Electronics, declares that this Monitor is in compliance with the essential requir ements and other relevant provisions of Dir ec tive 1999/5/EC. • The official Declaration of Conformity may be found at http://www .
250 P ow erS av er The power-sa ving function of this product reduces power consumption by switching off the scr een and changing the colour of the power LED if the product is not used for a specified period of time. The power is not turned off in power -saving mode.
251 Pr eset T iming Modes ― This product can be set to only one resolution f or each screen size to obtain the optimum picture quality due to the nature of the panel. Using a r esolution other than the specified resolution may degrade the picture quality .
252 Resolution Horizontal F requency (kHz) V er tical Fr equenc y (Hz) Pix el Clock (MHz) Sync P olarity (H/V ) VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.000 +/+ VESA, 1280 x 720 45.
253 Appendix Chapter 16 C ontac t SAMSUNG WORLD WIDE ― If you have any questions or comments relating t o Samsung products, please contact the SAMSUNG customer care centre. NORTH AMERICA U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG(726-7864) http://www.
254 LA TIN AMERICA COL OMBIA 01-8000112112 Bogotá: 6001272 http://www.samsung .com/co COST A RICA 0-800-507-7267 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung .com/latin (Spanish) http://www.
255 LA TIN AMERICA PUERTO RIC O 1-800-682-3180 http://www.samsung .com TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung .com URUGU A Y 40543733 http://www.samsung .com VENEZUELA 0-800-100-5303 http://www.samsung .com EUROPE A USTRIA 0810 - SAMSUNG (7267864, € 0.
256 EUROPE FINLAND 030-6227 515 http://www.samsung .com FRANCE 01 48 63 00 00 http://www.samsung .com/fr GERMANY 0180 5 SAMSUNG bzw. 0180 5 7267864* (*0,14 €/Min.
257 EUROPE ROMANIA 08008 SAMSUNG (08008 726 7864) TOLL FREE No . http://www.samsung .com SERBIA +381 11 321 6899 (old number still active 0700 7267864) http://www.samsung .com SL OV AKIA 0800 - SAMSUNG(0800-726 786) http://www.samsung .com SP AIN 902 - 1 - SAMSUNG (902 172 678) http://www.
258 CIS RUSSIA 8-800-555-55-55 http://www.samsung .com T ADJIKIST AN 8-10-800-500-55-500 http://www.samsung .com UKRAINE 0-800-502-000 http://www .samsung.com/ua (Uk rainian) http://www.samsung .com/ua_ru (Russian) UZBEKIST AN 8-10-800-500-55-500 http://www.
259 ASIA P ACIFIC PHILIPPINES 1-800-10-SAMSUNG(726-7864) for PLD T 1-800-3-SAMSUNG(726-7864) for Dig itel 1-800-8-SAMSUNG(726-7864) for Globe 02-5805777 http://www.samsung .com/ph SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung .com T AIW AN 0800-329-999 0266-026-066 http://www.
260 MENA OMAN 800-SAMSUNG(726-7864) http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) Q ATA R 800-2255 (800-CALL) http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) SA UDI AR ABIA 9200-21230 http://www.
261 AFRICA SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung .com T ANZ ANIA 0685 88 99 00 http://www.samsung .com UGANDA 0800 300 300 http://www.
262 Responsibility for the P ay Ser vice ( Cost t o C ustomers) ― When the ser vice is requested, in spit e of in war ranty, we ma y charge you for a visit from a service technician in the following cases . Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
263 WEEE C orrect Disposal of This P roduc t ( W aste Electrical & Elec tronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessor ies or literature indicates that the pr oduct and its electronic accessories (e.
264 Optimum Picture Quality and Afterimage Burn-in Pr evention Optimum Picture Quality • T o enjoy the optimum picture quality , go to Control P anel on your PC and adjust the resolution and r efresh rate as follows. The picture quality of TFT-L CDs may degrade if the optimum resolution is not selected.
265 Pr evention of A f terimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally . Normal operation refers to a continuously changing video pattern.
266 • Avoid combinations of a t ext colour and background colour of contrasting brightness. ― Avoid using g rey as it may contribute to afterimage burn-in.
267 Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of D olby Laboratories. Ⓡ Manufactured under a licence from U .S. Patent No ’ s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853.
268 T erminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above ref ers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progr essive), depending on the scanning method.
デバイスSamsung MD65Cの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung MD65Cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung MD65Cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung MD65Cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung MD65Cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung MD65Cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung MD65Cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung MD65Cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung MD65Cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
