AuviメーカーWIP20Sの使用説明書/サービス説明書
ページ先へ移動 of 19
www.auvivoip.com www.auvivoip.com ® ® WIP20S Instruction Manual Skype™ Telephone Adapter Designed for Skype ™.
Table of Contents www.auvivoip.com www.auvivoip.com Section 1: Notices Regulatory Compliance 01 T rademarks 02 Section 2: Introduction WIP20 Diagram 03 Package Contents 03 System Requirements 03 Secti.
Notices Section 1 01 01 Regulatory Compliance Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
02 02 T rademarks © 2006 Auvi Electronics N.A., LLC. All rights reserved. Auvi Electronics N.A. “Auvi” shall not be liable for any errors contained herein or for any damages arising out of or related to this document or the information contained herein, even if Auvi has been advised of the possibility of such damages.
Introduction Section 2 03 03 Diagram Package Contents The contents are specifically designed to be used only with the WIP20. System Requirements: • IBM PC compatible with minimum 400MHz processor .
Skype™ Software Section 3 04 04 The first step to using the WIP20 is to install Skype™ on the computer . This section describes how to download and install Skype™, create a Skype™ account and add contacts. Installing Skype™ Software If you already have the latest version of Skype™ on your computer , go to the next section.
Creating a Skype™ Account 05 05 7. In the next window , set up additional tasks, if needed, then click NEXT . 8. Click FINISH in the last window to complete the installation. 1. In the “New Users Create a Skype Account” tab, enter the required information.
06 06 Adding a Skype™ contact 1. Once logged-in to your account, go to the main Skype™ account window . 2. From the menu at the top of the window , select T ools, and then Add a Contact. 3. Enter the name of another Skype™ user in the appropriate text box, then click NEXT .
07 07 5. The contact will be added when authorized. Click FINISH. The contact has been added. T o view the contact list, select the Contacts tab from the main Skype™ window .
SkypeIn SkypeOut Section 3 08 08 SkypeIn is a paid service provided by Skype™. This service allows your Skype™ account to be called from any traditional landline phone or mobile phone. When you are signed up with SkypeIn and your phone rings, simply pick up the handset and answer like you would normally do with a traditional home phone.
Hardware Connection Section 4 09 09 This section explains how to physically connect the WIP20 to your computer . Connecting the WIP20 1. Connect the line-in cables to your sound card on the back of your computer . Pink = MIC jack Green = SPKR jack 2. Connect the line-in cables to the WIP20.
Section 4 10 10 5. If you already have speakers connected to your sound card, unplug them and reconnect them into the jack labeled “Audio out” on the back of the WIP20.
Auvi Software Installation Section 5 11 11 Y ou are now ready to install the Auvi Interface Software Application. This section will give you the step-by-step process to correctly install the interface. Be sure to fill in all the necessary information to access and run the program.
Section 5 12 12 5. If you want a desktop icon, check the box and click NEXT . 6. T o make changes, click BACK. If not, proceed by clicking INST ALL. 7. This window asks to run the application immediately after install has completed. T o approve, click NEXT .
Section 5 13 13 1 1. When the progress bar completes, follow the instructions that follow . 13. This is the final window to show all tests and configurations have been success fully completed to start using your WIP20S V oIP adapter . 12. All tests have been completed for your to start using your V oIP connection.
14 14 Operations Section 6 This section will describe how to use the Auvi Interface application with Skype™. Y ou will learn how to assign a speed-dial number to a Skype™ contact, and dial using the speed-dial function. 1. After logging into Skype™, double-click the Auvi Interface Shortcut Icon on the desktop to launch the program.
Basic Operations Guide Section 6 15 15 Call a Skype™ user name using speed-dial 1. Pick up telephone handset connected to the WIP20. 2. Listen for the dial-tone.
Troubleshooting Section 7 16 16 My computer will not verify the phone keys during installation - It normally takes two (2) or three (3) cycles for all the keys to be recognized. After each cycle, hang up the telephone and wait for the program to reset.
Limited Warranty Section 8 17 17 Auvi T echnologies warrants this product for the original purchaser to be free from defects in material and workmanship, under normal conditions, for a period of 90 days for parts and labor and 1 year for parts only from the date of original purchase.
デバイスAuvi WIP20Sの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Auvi WIP20Sをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAuvi WIP20Sの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Auvi WIP20Sの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Auvi WIP20Sで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Auvi WIP20Sを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAuvi WIP20Sの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Auvi WIP20Sに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAuvi WIP20Sデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。