SamsungメーカーSHC-730N/Pの使用説明書/サービス説明書
ページ先へ移動 of 24
SAMSUNG CCD CAMERA SHC-730N/P HIGH SENSITIVITY COLOR CAMERA INSTRUCTION MANUAL About this manual Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference. P/No. : Z6806-0541-01A VAN 04. 12 • SAMSUNG TECHWIN CO.
This installation should be made by a qualified service person and should conform to all local codes. The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert .
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 5 4 Features War ning Fine Picture in Ultra Low illumination. SSNR(Samsung Super Noise Reduction) SHC-730 has powerful DSP that can remove image noise efficiently and it shows clean and obvious image in low luminance.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 7 6 Contents Front Side Bottom Back Lens • Installing Auto Iris Lens • Installing C/CS-Mount Lens Connecting to Monitor Connecting.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 9 8 Precautions Do not install the camera in extreme temperature conditions. Only use the camera under conditions where temperatures are between -10 ˚C and +50˚C. Be especially careful to provide ventilation when operating under high temperatures.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 11 10 Composition Front C-Mount Lens Adapter Used to attach C-mount lens. Back Focus Adjustment Lever Used to adjust back focal length Name and Function of Each Section Tripod Mounting Bracket Screw Hole Used to fix the Tripod mounting bracket on the top of the camera.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 13 12 Name and Function of Each Section Bottom Tripod Mounting Bracket Tripod Mounting Hole Used to install the camera on an optional tripod. The tripod must be equipped with the screw specified as shown below.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 15 14 LENS The lens is not supplied with this camera. Purchase a lens suitable for your environment. This camera accepts the auto iris lens and both C-and CS-mount lens. 1. Peel approximately 8mm from the end of the lens cable outer cover.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 17 16 Connection Before mounting a lens, please check whether it is a C-mount or CS-mount lens. The back focus is set for the CS-mount lens at the factory. • Mounting a CS-Mount lens After removing the protecting cap, attach the lens into the camera by turning clockwise.
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 19 18 Connection Connecting to Monitor Connect the VIDEO Out jack to the monitor VIDEO In jack. • As the connecting method varies with the instruments, refer to the manual supplied with the instrument.
COLOR CCD CAMERA User’s Manual 21 COLOR CCD CAMERA User’s Manual 20 Connection Connecting to Power Configuration of The Menu Operating Y our Camera Each model has different power specification. Please check the name of the model and power specification before connecting to power source.
COLOR CCD CAMERA User’s Manual 23 COLOR CCD CAMERA User’s Manual 22 Operating Y our Camera Setting Up The Menu COLOR CCD CAMERA User’s Manual 23 COLOR CCD CAMERA User’s Manual 22 Use the five Setup Menu buttons on side of the camera. 1. Press the SET button to access the setup mode.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 25 COLOR CCD CAMERA User’s Manual 24 3. Press SET button. 4. You can enter up to 15 characters. Move the cursor to character-enter location by using the LEFT or RIGHT button. Select the desired character by using LEFT, RIGHT,UP or DOWN button.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 27 COLOR CCD CAMERA User’s Manual 26 SV-III DSP chip built-in provides intelligent light level control to overcome the severe Backlight conditions. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘Backlight’ using the UP or DOWN button.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 29 COLOR CCD CAMERA User’s Manual 28 Motion Detection Press SET button. Select the two kinds of ZONE NUMBER(1 or 2), ZONE 1 covers larger area than 2. Turn on ZONE STATE, then MD starts to be activated.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 31 COLOR CCD CAMERA User’s Manual 30 Tips on Using the Motion Detection Feature • After selecting zone and sensitivity, perform a test operation to make sure it works properly. • If the lighting flickers, the motion detection feature might not work properly.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 33 COLOR CCD CAMERA User’s Manual 32 You can control brightness of the screen by the shutter speed. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘Shutter’ using the UP or DOWN button.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 35 COLOR CCD CAMERA User’s Manual 34 • If you press the set button on ‘Auto’ mode. You can adjust brightness by increasing or decreasing the shutter speed. (EX. x2,...., x32, x64, ...., x128) • If you increase the number of shutter speed, moving object gets an more afterimage.
COLOR CCD CAMERA User’s Manual 37 COLOR CCD CAMERA User’s Manual 36 Operating Y our Camera SSNR (Samsung Super Noise Reduction) To reduce the noise on the screen. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘SSNR’ using the UP or DOWN button.
Operating Y our Camera COLOR CCD CAMERA User’s Manual 39 COLOR CCD CAMERA User’s Manual 38 PRIVACY: To mask area which you want to mask - OFF: Deactivation - ON: Privacy mode activated · Press the SET button. · 4 AREAS are selectable. Select the area you want(AREA1, AREA2, AREA3, AREA4) · Set AREA STATE ‘ON’ using LEFT or RIGHT button.
COLOR CCD CAMERA User’s Manual 41 COLOR CCD CAMERA User’s Manual 40 1. RS-232C Communication Setting. • Mode : Serial • Data Bit : 8 • Bit/sec : 9600bps • Stop Bit : 2 • Port : Com1 • Parity : None • Flow Control : XON/XOFF 2. Setup menu Command.
COLOR CCD CAMERA User’s Manual 43 COLOR CCD CAMERA User’s Manual 42 Problem Motion Detection function is not active. The color of the picture is not matched. The image on the screen flickers. L/L mode isn’t able to be selected. L/L is not operating properly.
DECLARA TION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO.
MEMO MEMO.
デバイスSamsung SHC-730N/Pの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung SHC-730N/Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung SHC-730N/Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung SHC-730N/Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung SHC-730N/Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung SHC-730N/Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung SHC-730N/Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung SHC-730N/Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung SHC-730N/Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
