SamsungメーカーSP-H700の使用説明書/サービス説明書
ページ先へ移動 of 84
Owner's Instructions SP-H700/H710/H500.
Connections and Source Setup Before Connections ............................................22 Connecting to Video Equipment Connecting to VCR/Camcorder/Cable Box ..........23 Connecting to DVD ............................................24 Connecting to the Digital TV Receiver .
Preparation T able of Contents 3 Menu Option Setting the Language ..........................................52 Setting the Menu Position ..................................53 Setting the Menu Translucency ..........................54 Setting the Menu Display Time .
Preparation Features and Design 4 Features and Design ■ SP-H700/SP-H710: DLP TM HD2 + DMD panel capable of 1280x720 resolution ■ SP-H500: DLP TM ED2 + DMD panel capable of 1024x576 resolution ■ .
Caution on Lamp Use and Replacement Preparation Caution on Lamp Use and Replacement 5 ■ The Projector lamp changes in nature depending on time of use and using environment. Refer to the installation and other recommended operational sections of the user’s manual to avoid rapid degradation of performance and deterioration of picture quality.
.
Preparation Projector and Accessories ............................8 Installation and Basic Adjustments ..........14 VISUAL REALISM.
Front/Upper Side PROJECTOR AND ACCESSORIES Fr ont/Upper Side and Accessories Preparation Projector and Accessories 8 1 1 Indicators - TEMP (Red LED) - LAMP (Blue LED) - STAND BY (Blue LED) Refer to page 9 for details. 2 2 Remote Control Signal Receiver 3 3 Focus Ring Used for Focus Adjustment.
Preparation Projector and Accessories 9 : Turned On : Flashing : Turned Off STANDBY LAMP TEMP Information If you press the POWER button on the remote control or projector, the screen appears within 30 seconds. The projector is in normal operating condition.
Preparation Projector and Accessories 10 PROJECTOR AND ACCESSORIES Rear Side and Cables Rear Side Power Cord Connected to the wall outlet ∏ . Video (COMPOSITE) Cable Connected to the connection port ˇ . S-Video Cable Connected to the connection port ´ .
Preparation Projector and Accessories 11 1 1 ON Used to turn on the projector. 2 2 COMP.1 (Pages 24~26) Used to switch to COMPONENT 1 Mode. 3 3 COMP.2 (Pages 24~26) Used to switch to COMPONENT 2 Mode. 4 4 S-VIDEO (Pages 23, 26) Used to switch to S-VIDEO Mode.
Preparation Projector and Accessories 12 Setting the Adjustment (right), or move to lower item. 1. Press on the part of the lid to r emove it. 2. Insert two AAA-sized 1.
Preparation Projector and Accessories 13 The remote contr ol is effective within a 30° angle 23~33 ft (7~10m) from the pr ojector . CAUTION ■ Keep used batteries away from children and dispose of them properly. ■ Do not use new and used batteries together.
14 NOTE ■ The projector may be installed on the ceiling in front / back side of the screen. ■ When installing the projector on the ceiling, contact your dealer. Install the projector so that the pr ojection is perpendicular to the screen. Install a translucent screen to place the projector on the backside of the scr een.
Preparation Installation and Basic Adjustments 15 1. Plug the power cord into the power terminal on the r ear side of the projector . 2. Press and push the power switch on the r ear side of the projector towar d " - ". 3. Press the POWER button of the pr ojector or the ON button of the remote contr ol.
Preparation Installation and Basic Adjustments 16 1. Y ou can adjust the size of image within zoom range by manipulating the Zoom Knob. 2. Focus the picture on the scr een using the Focus Ring. 12 NOTE Focus may appear dim if the projector is installed at a shorter than recommended distance.
Preparation Installation and Basic Adjustments 17 For level placing of the projector , adjust the Adjustable Feet of the projector . NOTE ■ You may adjust the level of the projector up to 5 degrees. ■ Depending on the position of the projector, Keystone distortion of image may appear.
Preparation Installation and Basic Adjustments 18 Lens Shift Dial Move the picture pr ojected on the screen up and down within the lens range by turning the Lens Shift Dial on the top side of the projector with your fingers.
Preparation Installation and Basic Adjustments 19 Install the projector on a flat, even sur face and level the projector using the adjustable feet to realize optimal pictur e quality . If images are not clear , adjust them using the Zoom Knob or Focus Ring, or move the projector forwar d and backward.
Preparation Installation and Basic Adjustments 20 INST ALLA TION AND BASIC ADJUSTMENTS Screen Size and Pr ojection Distance NOTE This projector is designed to show images optimally on a 80 to 150 inch sized screen. Screen Screen X Y 200 190 180 170 160 150 140 130 120 11 0 100 90 80 70 60 50 40 442.
VISUAL REALISM Connections and Source Setup Before Connections ....................................22 Connecting to Video Equipment ................23 Setting up the External Input Source .
1. Refer to the manual of the device the projector is connected to. The number and position of ports may differ depending on type of devices. 2. Do not connect power until all the connections are completed. If you try to connect power while connecting cables, it may result in damage to the projector.
CONNECTING TO VIDEO EQUIPMENT Connecting to VCR/Camcorder/Cable Box Connections and Source Setup Connecting to Video Equipment 23 Connect COMPOSITE (yellow) input port of the projector to the VIDEO OUT (yellow) port of video equipment using the video cable.
24 Connections and Source Setup Connecting to Video Equipment S-VIDEO OUT COMPONENT VIDEO OUT AUDIO OUT Rear side of Projector DVD Component Cable CONNECTING TO VIDEO EQUIPMENT Connecting to DVD Rear Connection Connect COMPONENT1 or COMPONENT2 (Y/Pb/Pr) ports of the pr ojector to Component port on the r ear side of DVD using Component Cable.
Connections and Source Setup Connecting to Video Equipment 25 Connect antenna cable to antenna signal input terminal of the receiver . 1 Connect COMPONENT1 or COMPONENT2 (Y/P b /P r ) port of the projector to Component por t of the receiver using Component Cable.
Connections and Source Setup Setting up the External Input Source 26 Press the MENU button. The main menu is displayed. 1 Press the desired source button ( COMP .1 / COMP .2 / S-VIDEO/COMPOSITE / PC / DVI ). Pressing a button switches to the respective mode.
Naming the External Connections You can select and set up the type of device you want to connect to the projector. Connections and Source Setup Naming the External Connections 27 1 MENU 2, 3, 4, 5 Select 3, 4,5 … / † 6 EXIT Press the MENU button. The main menu is displayed.
Picture Adjustment.
VISUAL REALISM Picture Adjustment Selecting Picture Mode ..............................30 Custom Settings of the Picture ..................31 Changing the Color Standard ....................32 Selecting and Adjusting Color T emperature ...............
Selecting Picture Mode Picture Adjustment Selecting Picture Mode 30 Press the P .MODE button. Each press of the button, picture mode is switched to Dynamic , Standard , Movie1 , Movie2 , User1 , User2 , User3 and Custom . One Touch 1 MENU 3, 4 Select 2, 4 … / † 5 EXIT Press the MENU button.
Custom Settings of the Picture You can adjust Contrast , Brightness , Sharpness , Color and Tint of the picture as desired. Picture Adjustment Custom Settings of the Picture 31 NOTE You cannot adjust tint when the input of COMPONENT1 and COMPONENT2 are set at 480p, 720p and 1080i.
Picture Adjustment Changing the Color Standard 32 Changing the Color Standard You may adjust the color standard to suit the color standard of the input signal. 1 MENU Select 2, 3, 4, 5 … / † / œ / √ 6 EXIT 2, 3, 4, 5 Press the MENU button. The main menu is displayed.
Selecting and Adjusting Color T emperature You can change tint of the entire screen to suit your needs. Picture Adjustment Selecting and Adjusting Color T emperature 33 1 MENU Select 2, 3, 4, 5, 6 … / † / œ / √ 7 EXIT 2, 3, 4, 5, 6 Press the MENU button.
Picture Adjustment Gamma Correction 34 Gamma Correction Gamma is used to improve the picture quality with color balance. 1 MENU 2, 3, 4, 5 Select 2, 3, 4, 5 … / † 6 EXIT NOTE Refer to page 30 for information on Gamma Mode1 , 2 , and 3 . Press the MENU button.
Saving Custom Picture Settings Used to save custom picture ( Contrast , Brightness , Sharpness , Color , Tint , Color Temperature and Gamma ) settings. Picture Adjustment Saving Custom Picture Settings 35 1 MENU 2, 3, 4, 5, 6 Select 2, 3, 4, 5, 6 … / † / œ / √ 7 EXIT Press the MENU button.
36 Picture Adjustment Setting up DNIe Setting up DNIe DNIe ( D igital N atural I mage e ngine) is an image enhancing function developed by Samsung Electronics. It enables users to enjoy brighter, sharper and more dynamic pictures. 1 MENU 2, 3, 4 Select 2, 3, 4 … / † 5 EXIT Press the MENU button.
37 Picture Adjustment Selecting Picture Size Selecting Picture Size 1 MENU 2, 3, 4 Select 2, 3, 4 … / † 5 EXIT Press the P .SIZE button. Each press of the button, picture size is switched to Full , Zoom1 , Zoom2 and 4:3 . One Touch Press the MENU button.
Picture Adjustment Selecting Picture Size 38 O : Supported Modes X : Unsupported Modes Supported Picture Sizes NOTE Refer to page 58 for display modes supported.
Picture Adjustment Screen Position Adjustment 39 Screen Position Adjustment Adjust the screen position if the edges are not aligned. 1 MENU 2, 3 Select 2, 3, 4 … / † / œ / √ 5 EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲ or ▼ button to move to Picture .
Film Mode Supports enhanced screen quality for films of 24 frames. Picture Adjustment Film Mode 40 1 MENU 2, 3, 4 Select 2, 3, 4 … / † 5 EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲ or ▼ button to move to Picture . The Picture menu is displayed.
Overscan Used to display raw input signals from 480p, 576p, 720p, 1080i HD sources or scale to fit to 1280 x 720 resolution after cutting out certain boundaries using software scaling. Picture Adjustment Overscan 41 1 MENU 2, 3, 4 Select 2, 3, 4 … / † 5 EXIT Press the MENU button.
Still Picture Used to pause playback to see a still picture. Picture Adjustment Still Picture 42 Press the STILL button. Each press of the button pauses and resumes play back.
VISUAL REALISM Setup Flipping/Reversal of Projected Image ....44 Light Setting ................................................45 Correcting V ertical Keystone ....................46 T est Patterns ..............................................47 Restoring the Factory Default Settings .
Flipping/Reversing the Pr ojected Image To support positioning of the projector, horizontal/vertical flipping and picture reversal are available. Setup Flipping/Reversing the Projected Image 44 Press the INST ALL button. The screen will flip over horizontally or vertically with each press of the button.
Setup Light Setting 45 1 MENU 2, 3, 4 Select 2, 3, 4 … / † 5 EXIT Light Setting Used to set the image brightness by adjusting the amount of light generated by the lamp. Theater Used to reduce the brightness of the lamp in dark ambient light to prevent reflection in the eye.
Correcting V er tical Keystone Used to compensate image shape when image distortion occurs. Setup Correcting V-Keystone 46 Press the V .KEYSTONE button. Press the œ or √ button to adjust picture image optimally. One Touch 1 MENU 2, 3 Select 2, 3 … / † / œ / √ 4 EXIT NOTE V-Keystone corrects distortion of picture image by software.
T est Patterns Generated by the projector itself. Utilized as installation basis for better installation of the projector. Setup T est Patterns 47 1 MENU 2, 3, 4 Select 2, 3, 4 … / † 5 EXIT NOTE The Crosshatch and Screen Size patterns of this projector are provided by JKP (JK Production).
Restoring the Factor y Default Settings Used to restore setting values to factory defaults. Setup Restoring the Factory Default Settings 48 1 MENU 2, 3, 4 Select 2, 3, 4 … / † / œ / √ 5 EXIT NOTE User settings including Edit Name and Custom Picture will be reset.
Information You can check external source signals, picture setup, PC picture adjustment and lamp use time. Setup Information 49 Press the INFO button. 1 MENU 2, 3 Select 2, 3 … / † 4 EXIT One Touch Press the MENU button. The main menu is displayed.
.
VISUAL REALISM Menu Option Setting the Language ..................................52 Setting the Menu Position ..........................53 Setting the Menu T ranslucency ..................54 Setting the Menu Display Time ..................55 Selecting the Quick Menu .
52 Setting the Language You can select the language used for the menu screen. Menu Option Setting the Language 1 MENU 3, 4 Select 2, 4 … / † 5 EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲ or ▼ button to move to Menu Option .
53 Setting the Menu Position You can move Menu Position to up/down/left/right. Menu Option Setting the Menu Position 1 MENU 2, 3 Select 2, 3, 4 … / † / œ / √ 5 EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲ or ▼ button to move to Menu Option .
54 Setting the Menu T ranslucency You can set the translucency of menu. Menu Option Setting the Menu T ranslucency 1 MENU 2, 3, 4 Select 2, 3, 4 … / † 5 EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲ or ▼ button to move to Menu Option .
55 Setting Up the Menu Display Time You can set the display time of the menu. Menu Option Setting Up the Menu Display Time 1 MENU 2, 3, 4 Select 2, 3, 4 … / † 5 EXIT Press the MENU button. The main menu is displayed. 1 Press the ▲ or ▼ button to move to Menu Option .
56 Selecting the Quick Menu Menu Option Selecting the Quick Menu Press the QUICK button. The menu you used previously will appear. One Touch.
VISUAL REALISM Connecting to PC Before Connecting to PC ............................58 Setting up the PC Environment ..................59 Connecting to PC ........................................60 Automatic Picture Adjustment ..................62 Frequency Adjustment .
Before Connecting to PC Check the following before connecting the projector to a PC. Connecting to PC Before Connecting to PC 58 640 x 350 720 x 400 640 x 480 800 x 600 832 x 864 1024 x 768 1280 x 102.
Connecting to PC Setting up the PC Environment 59 1 Click the right mouse button on the W indows wallpaper and click on Properties . Display Properties tab will appear. 2 Click on Settings tab and set the Screen resolution by referring to Resolution described in the display mode table supported by this pr ojector .
Connecting to PC You can connect a PC to the projector and use it as a monitor. Connecting to PC Connecting to PC 60 T urn on the projector and pr ess the PC button to select PC . If the projector is connected to DVI, press the DVI button to select DVI .
Connecting to PC Connecting to PC 61 CAUTION DVI-D cable does not support analog RGB signals. PC Video Cable (15-pin signal) DVI-D (supports only digital signals) This appliance supports VESA Plug & Play and recognizes connection to PC automatically .
Automatic Picture Adjustment Used to adjust frequency and phase of PC screen automatically. Connecting to PC Automatic Picture Adjustment 62 Before adjusting! Set the input mode to PC . 1 MENU 2, 3, 4 Select 2, 3 … / † 5 EXIT PC Press the MENU button.
Connecting to PC Frequency Adjustment 63 1 MENU 2, 3, 4 Select 2, 3, 4 … / † / œ / √ 5 EXIT Frequency Adjustment Used to adjust frequency when vertical lines appear on PC screen. Before adjusting! Set the input mode to PC . PC Press the MENU button.
Fine T uning with the Phase Adjustment Used to fine tune the PC screen. Connecting to PC Fine T uning with the Phase Adjustment 64 1 MENU 2, 3, 4 Select 2, 3, 4 … / † / œ / √ 5 EXIT Before adjusting! Set the input mode to PC . PC Press the MENU button.
Connecting to PC Zooming the Screen 65 1 MENU 2, 3, 4, 5 Select 2, 3, 4, 5 … / † / œ / √ 6 EXIT Zooming the Screen Used to extend PC screen from the center. Before adjusting! Set the input mode to PC . PC Press the MENU button. The main menu is displayed.
Connecting to PC Reset the PC 66 1 MENU 2, 3, 4, 5 Select 2, 3, 4, 5 … / † / œ / √ 6 EXIT Reset the PC Used to reset PC mode settings to the Factory Default values. Before adjusting! Set the input mode to PC . PC Press the MENU button. The main menu is displayed.
Connecting to PC Reset the PC 67 VISUAL REALISM T roubleshooting Before Contacting Service Personnel ........68.
T roubleshooting Before Contacting Ser vice Personnel 68 Symptoms T roubleshooting Note Installation and Connection Menu and Remote Control Be sure that the power cord in place and the power switch on the rear side of the projector is turned on " - ".
T roubleshooting Before Contacting Ser vice Personnel 69 Screen and External Source Symptoms T roubleshooting Note ■ Be sure that the power cord of the projector is in place. ■ Be sure that the proper input source is selected. ■ Be sure that cable is properly connected to the rear panel of the projector.
.
VISUAL REALISM Other Information Storage and Maintenance ..........................72 Purchasing Optional Parts ........................73 Structure of Screen Menu ..........................74 Lamp Replacement ......................................77 RS-232C Connection and Control .
Storage and Maintenance Clean and maintain the projector in the following way. Other Information Storage and Maintenance 72 Cleaning the Projector and Lens Use a dry soft cloth. ■ Do not use flammable materials such as benzene and thinner. Do not use a wet cloth.
Purchasing Optional Par ts Information for purchasing accessories or optional parts. Other Information Purchasing Optional Parts 73 Optional Parts Y ou can pur chase at electronics shops or over the Internet. DVI-D Cable Y ou can pur chase at electronics shops or over the Internet.
Structure of Screen Menu You can see the entire structure of screen menu. Other Information Structure of Screen Menu 74 Picture Mode Dynamic / Standard / Movie1 / Movie2 / User1 / User2 / User3 / Cust.
Picture Size Full / Zoom1 / Zoom2 / 4:3 Position DNIe Off / Demo / On Film Mode Off / On Overscan Off / On Other Information Structure of Screen Menu 75 Setup Install Front-Floor / Front-Ceiling / Rea.
Language English / Deutsch / Nederlands / Español / Français / Italiano / Svenska / Português / / Menu Position Menu Translucency Opaque / High / Medium / Low Menu Display Time 5 / 10 / 30 / 60 / 9.
Lamp Replacement Other Information Lamp Replacement 77 Detach the screw of the lamp cover. Push to open the lamp cover in the direction of the arrow. Detach the three screws. Lift and grip the lamp handle in the direction of the arrow and pull it out.
78 RS-232C Connection and Contr ol Connecting the Projector to a PC You can connect the Projector to a PC using the RS- 232C (Crossed, Female Type) cable to control the projector. ■ Do not disconnect or connect the RS-232C cable while the Computer or the Projector is operating.
79 e.g.) DISPLAY → CUSTOM CONFIGURATION → Set the CONTRAST to 60 Prameter 1 Prameter 2 Prameter 3 Command Return Commands 0x08 0x11 0x01 0x00 0x00 0x00 0x01 0xE5 0x08 0x11 0x02 0x00 0x00 0x00 0x03.
80 Specifications Design and specifications of the product may be modified without prior notice for better performance. This appliance is Class B device that can be used in both residential and industrial areas.
81 Remote Contr ol Specifications Other Information Remote Control Specifications Function and T ransmission Codes LEADER PULSE System Code System Code Data Code /Data Code (Reverse Data Code) 4.
82 Memo.
83 Memo.
BP68-00507C-00 Europe Only Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection system.
デバイスSamsung SP-H700の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung SP-H700をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung SP-H700の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung SP-H700の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung SP-H700で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung SP-H700を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung SP-H700の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung SP-H700に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung SP-H700デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
