SamsungメーカーSSA-P401の使用説明書/サービス説明書
ページ先へ移動 of 27
Access Control Panel user manual SSA-P400 SSA-P400T SSA-P401 SSA-P401T imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please visit our website.
2_ safety information safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE.
English 3 SAFETY INFORMATION Keep out of direct sunlight and heat radiation sources. It may cause fi re. Install it in a place with good ventilation. Avoid aiming the controller directly towards extremely bright objects such as sun.
4_ contents contents PRODUCT INTRODUCTION 5 5 Features 7 What’s included 12 Cable Selection INSTALLATION AND EXTERNAL CONNECTION 13 13 Connecting the termination resistor and diode 14 Earth-groundin.
English 5 PRODUCT INTRODUCTION FEATURES State-of-the-art Access Controller SSA-P400(T)/SSA-P401(T) is a state-of-the-art door access controller device that provides a high level security system in an affordable price, meeting the needs in the security industry.
6_ product introduction product introduction Input Port Format Setup 15 input ports are provided by default. For these ports, you can specify if the format of the incoming signal is blocked (NO) or connected (NC) in normal operation. This setting will make all ports operate same regardless of the output status of the input device.
English 7 PRODUCT INTRODUCTION WHAT’S INCLUDED Check if the following items are included in the product package. xGn Main Unit Quick Guide CD Manual Diode (x12) (UF4004, 1N40.
8_ product introduction product introduction Main Board 1 Board ID Setup Switch The address number specifi ed by the address setup switch should match that of the host computer as it is used for communications with the host computer.
English 9 PRODUCT INTRODUCTION 6 RJ-45 Connect the LAN cable for TCP/IP communications. 7 RS-232 Communication Port One RS-232 communication port is provided. Used to exclusively connect to a PC in a local area. 8 RS-422 Communication Port One RS-422 communication port is provided.
10_ product introduction product introduction I/O Board 1 Fixing Hole Used to fi x the main board to the I/O board using screws. 2 Power LED Indicator The red indicator turns on in the normal power supply condition. 3 Main Board Connection Port Connector used to connect to the main board.
English 11 PRODUCT INTRODUCTION 8 INPUT #8 Input port #8. 9 INPUT #9 Input port #9. 10 INPUT #10 Input port #10. 11 INPUT #11 Input port #11. 12 INPUT #12 Input port #12. 13 INPUT #13 Input port #13. 14 INPUT #14 Input port #14. 15 INPUT #15 Input port #15.
12_ product introduction product introduction CABLE SELECTION Item Cable Type Cable Type 1 Power (DC12V) DC Power Device Belden #9409, 18 AWG 2 Conducto r, Unshi elded Belden #9409, 18 AWG 2 Condu.
English 13 INSTALLATION AND EXTERNAL CONNECTION installation and external connection CONNECTING THE TERMINATION RESISTOR AND DIODE Termination Resistor A resistor is inserted for matching the line’s impedance to prevent distortion and reduction in RS-422 or RS-485 long distance data communications, which is referred to as termination resistor.
14_ installation and external connection installation and external connection EARTH-GROUNDING THE COMMUNICATION CABLES We recommend you to use a proper grounding system for the communication cables. The best grounding method is to earth-ground the shield wire of the communication cable.
English 15 INSTALLATION AND EXTERNAL CONNECTION POWER, READER, AND I/O CONNECTION Power Connection - Connect the plus (+) line of DC 12V to the corresponding port (+12V). - Connect the GND (-) line of DC 12V to the GND (-) port. Reader Connection - Connect the plus (+) line of the reader to the corresponding port (DC +12V).
16_ installation and external connection installation and external connection Input Connection - Exit Button Connection (Input #1, Input #3) Connect one line of the Exit button to an input port (Door 1: Input #1, Door 2: Input #3) of the Exit button. Connect the other line of the Exit button to GND (-).
English 17 INSTALLATION AND EXTERNAL CONNECTION Output Connection - If the door lock is in POWER FAIL SAFE mode: (Door 1: Relay #1, Door 2: Relay #3) Connect the COM line of the Door Lock relay to DC +12V. Connect the plus (+) line of the Door Lock to the Normal Close (NC) line of the Door Lock relay.
18_ installation and external connection installation and external connection COMMUNICATION LINE CONNECTION RS-232 Communication Port Connection A 9-pin connector for serial communication is required to make connection to the PC. Connect the 9 pin connector for RS-232 communications as follows: Connect RS-232 TX to pin #2 of the 9-pin connector.
English 19 INSTALLATION AND EXTERNAL CONNECTION RS-422 Communication Port Connection (Standalone) The RS-422/RS-232 converter is required to establish RS-422 communications. Connect the 9-pin connector of the RS-422/RS-232 converter as follows: Connect RS-422 TX(-) to the RX(-) port of the converter.
20_ installation and external connection installation and external connection RS-422 Communication Port Connection (Multiple Units) The RS-422/RS-232 converter is required to establish RS-422 communications. - Follow the guidelines below to make connection between devices.
English 21 INSTALLATION AND EXTERNAL CONNECTION TCP/IP Communication Port Connection 1) TCP/IP Communication Confi guration 2) TCP/IP Connection Connect the LAN cable to the TCP/IP RJ-45 jack as shown. (applicable only to SSA-P400T / SSA-P401T) Connect the RJ45 jack of the unit to the RJ45 plug, the LAN cable of the network system.
22_ initialization initialization SYSTEM INITIALIZATION Initializing the system using the Initialize switch Apply the power and initialize the system by using the initialization switch. Locate the Initialize switch ( ) on the upper right corner and press both switches simultaneously.
English 23 INITIALIZATION BOARD ID SETTING Each device in the multi-serial communication connection is assigned a unique number to identify each other. The initial value of the switch is “0”, and all of the 8 switches are defaulted to OFF. Each switch has a unique value, and the board ID is the sum of the values of the switches.
24_ troubleshooting troubleshooting TROUBLESHOOTING If the product does not work properly, please check the followings before contacting us. If the trouble persists, please contact the SAMSUNG Customer Service near you. Problem Action Can I specify RF only or RF+P/W mode differently according to the card? 1) It is not available.
Problem Action No communication is available when the system is in sync with the PC. 1) Check the communication settings between the PC application and the device. - Check the board ID (COMM address) and match it with that of the PC application. - Specify a unique board ID (COMM address) for each of the multiple devices.
26_ product specifi cations product specifi cations PRODUCT SPECIFICATIONS Item SSA-P400 SSA-P400T SSA-P401 SSA-P401T Users 1,000 ~ 20,000 / 30,000 / 40,000 / 50,000 Users (Default :20,000) Event Buffer 20,000 ~ 29,500 / 3,000 / 8,000 / 14,000 (Default : 29,500) Power / Current DC 12V, MAX.
AB82-02555A Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems.) This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life.
デバイスSamsung SSA-P401の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Samsung SSA-P401をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSamsung SSA-P401の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Samsung SSA-P401の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Samsung SSA-P401で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Samsung SSA-P401を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSamsung SSA-P401の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Samsung SSA-P401に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSamsung SSA-P401デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
