AcerメーカーNote 950の使用説明書/サービス説明書
ページ先へ移動 of 28
Getting Started 1-1 Chapter 1 Getting Started This chapter introduc es this m ultim edia notebook and gives f irst-tim e operating instruc tions. 1.1 Overv iew This s y stem supports the Intel Pentium.
1-2 User’s M anual An innovative feature of the notebook is the palm rest. Loc ated below the keyboard, it provides am ple palm space f or your ty ping com fort in any work environm ent.
Getting Started 1-3 1.2 Item Checklist Remove all items from the carton and save the pack ing m aterials for future use. If any of the following item s are m issing or dam aged, contact your dealer im m ediately.
1-4 User’s M anual 1.3 LCD Displ ay The system supports four differ ent LCD display configurations as s hown in Table 1-1. Table 1-1 LCD Display Configurations Ty pe Size Resolution DualScan STN color 10.4-inch 640 x 480, 256 colors DualScan STN color 10.
Getting Started 1-5 A mic roswitch, located near the LCD c over hinge, detec ts the opening and closing of the LCD display. The LCD back light goes off w hen you close the display w ithout turning of f the s ystem power. Reopening the dis play turns on the back light again.
1-6 User’s M anual 1.4 Front Panel The f ront panel has three bays that house r emovable com ponents. T hese include the storage bay , the accessory bay and the power bay. Figure 1-3 shows the front panel. 1 Storage Bay 2 Accessor y Bay 3 Power Bay Figure 1-3 Front Panel Front Panel Features n Storage bay This bay houses a 2.
Getting Started 1-7 Module Installation and Sw apping To rem ove a m odule: Release the bay lock of the bay you want to remove the module fr om . Pull the module out of the bay. The AC adapter and CD-RO M drive have built-in lock s on the units them selves.
1-8 User’s M anual Table 1-2 lis ts all pos sible m odule com binations. Table 1-2 M odule-Bay Combinations Storage Bay Accessory B ay Power Ba y HDD module HDD module HDD module HDD module HDD modu.
Getting Started 1-9 1.5 Rear Panel The rear panel consis ts of per ipheral connector s. Open the port c over to access the CRT, s erial, parallel and expansion por ts. T he rear panel als o includes other ports and connector s. Figure 1-5 s hows the rear panel.
1-10 User’s M anual W hen connecting a port replicator or c onnecting the notebook to a dock ing station, open the expansion por t cover (ins tead of the entire port c over) and then mak e the connec tion.
Getting Started 1-11 1.6 Left Panel The lef t panel of the system includes PCMCIA s lots and audio j ack s f or a mic rophone and line-in and line-out devic es.
1-12 User’s M anual Flexible PCMCIA im plementation and s upport enable y ou to use c redit-card- sized PC cards sim ilar to add-on c ards f or des ktop com puters, thus enhancing the usability and expandability of this notebook . In this slot, you can insert one type III or two ty pe I/II cards .
Getting Started 1-13 1.7 Right Panel The right panel f eatures the connectors and buttons as sociated with sy stem power. Figure 1-9 shows the right panel of the system.
1-14 User’s M anual 1.8 A C A dapter The AC adapter acc epts input voltage ranging fr om 100V to 240V at a frequenc y range of 47Hz to 63Hz . Figure 1- 10 shows the AC adapter. Figure 1-10 AC Adapter The status LCD displays the DC-in icon ( ) when the notebook is r unning on the AC adapter.
Getting Started 1-15 Connecting the A C Adapter The AC adapter c onnects to the s y stem in two ways, either inter nally or externally. Follow these steps to connect the AC adapter. 1 Connecting the Adapter Internally 1. During pack ing, the AC adapter is inserted into the power bay.
1-16 User’s M anual Connecting the Adapter Externally 1. Release the AC adapter lock and slide the AC adapter out of the power bay . 2. You may now insert the battery pack into the power bay . Slide it into the bay until it clic ks into place. 3. Connect the power cord to the AC adapter.
Getting Started 1-17 5. Connect the other end of the DC-in cable to the DC-in port of the notebook. 6. Connect the power cord to a power outlet..
1-18 User’s M anual 1.9 Starting the Sy stem Figure 1-11 shows the loc ation of the power on/off switch. Pr ess this toggle switch to turn the system on and of f. T he power icon ( ) on the status LCD appears when you turn on the sy stem . The battery icon ( ) or the DC-in icon ( ) also appears depending on the power source.
Getting Started 1-19 1.10 Interior Features Figure 1-12 shows the loc ation of the control buttons and status LCD. Figure 1-12 Control Buttons and Status LCD Control Buttons No-reboot Setup button This button enables you to access Power Management and LCD Panel Contr ol pages of the Setup utility .
1-20 User’s M anual Status LCD Indicators Docking icon This icon appears when the sy stem is connected to a dock ing station. Power icon This ic on appears when power is applied to the system . Standby mode icon This ic on appears when the system is in system standby mode.
Getting Started 1-21 1.1 1 Key board The keyboard has full-sized keys, including an embedded k eypad, separate cursor keys and twelve function k eys. Figure 1-13 Keyboard — U.
1-22 User’s M anual Lock Keys The system has three loc k k eys which you can toggle on and off. W hen you activate a lock k ey , the cor responding indicator displays on the status LCD. # W hen the Caps Lock indicator is on, all alphabetic character s typed are in uppercase.
Getting Started 1-23 Embedded Keypad The em bedded keypad, which has f unctions s imilar to a des kt op numer ic keypad, is indicated by small charac ters loc ated in the upper right cor ner of the keycaps. To s implif y the keyboard legend, the cursor- control k ey symbols are not printed on the k eys.
1-24 User’s M anual Palm Rest and Foot Supports The palm res t, located below the keyboard, gives you a place to rest your hands while y ou type. Figure 1-16 Palm Rest In addition, tw o foot supports on the underside allows you to tilt the notebook to a mor e com fortable typing position.
Getting Started 1-25 1.12 T ouchpad The touchpad is an IBM PS/2-type mouse-c ompatible pointing devic e that senses m ovem ent on its surf ace. T his m eans the c ursor res ponds as you move your finger on the surf ace of the touc hpad. A central location on the palmr est provides am ple c omf ort and suppor t.
1-26 User’s M anual Touchpad Basics The f ollowing tips will help y ou use the touchpad: 1. Move y our f inger acros s the touchpad to m ove the cur sor. 2. Press the left and right buttons located on the sides of the touchpad to do selection and execution functions.
Getting Started 1-27 1.13 Usi ng the Notebook for the Fir st Time Follow these steps when y ou use the notebook for the first tim e, to ens ure top perform anc e right from the s tart. 1. Condition the battery pack. Conditioning battery pack s optimizes batter y life and im proves r echarge effic iency.
1-28 User’s M anual You may also want to install W indows if y our pac k age inc ludes it. Inser t W indows diskette #1 into the dis kette drive and type A:SETUP . Follow the screen ins truct ions to install W indows. 3. Install the zero-volt suspend f unction.
デバイスAcer AcerNote 950の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Acer AcerNote 950をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAcer AcerNote 950の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Acer AcerNote 950の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Acer AcerNote 950で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Acer AcerNote 950を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAcer AcerNote 950の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Acer AcerNote 950に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAcer AcerNote 950デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
