Schneider ElectricメーカーProcessor Adapterの使用説明書/サービス説明書
ページ先へ移動 of 425
Momentum M1 Processor Adapter and Option Adapter User Guide 870 USE 101 10 V ers ion 2.
Data, Illu stration s, Alterat ions Data and illus trations are not binding. We r eserve the ri ght to alter pro ducts in line with our policy of continuous product d evelop ment. If you ha ve any suggestion s for impro vements or amen dments or have found error s in this publica tion, please n otify us by e- mail at techcomm @modicon.
Novem ber 2000 Momentum M1 Processor Adapter and Option Ada pter User Guide 870 U SE 101 10 V ersion 2.0.
Document Set Mome ntum I/ O Base s Use r Guid e 870 USE 0 02 00 Momentu m Interbus Com munica tion Ada pter Use r Manual 870 USE 0 03 00 Mom en tum FI PIO Co mmun icati on Ad apter U ser M anual 870 U.
Preface 870 USE 101 1 0 V.2 v Preface The data and illustrations found in this book are no t bin ding. W e reserve the right to modif y our product s in line with ou r policy of con tinuou s product development .
Preface vi 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 vii Contents About This Book ................. ............................ ....................... ................. ..... 15 Revision His tory..................... ........... ............ ................. ......................
Contents viii 870 USE 101 10 V.2 Chapter 2 Overview of Momentum Option Adapters .... ...... ......... ....... . 65 Section 2. 1 Introducin g the Momentum O ption Adapters ................ ........... ........... ........... 66 Basic Feature s of Opti on Adapters .
Contents 870 USE 101 1 0 V.2 ix Pinouts fo r Modbus Port 1 .......... ................. ............................ ......................117 Section 4 .2 Modbus Port 2 ................. ........... ................. ...................... ..........
Contents x 870 USE 101 10 V.2 Cable Acce ssories for Modbu s Plus Networ ks ....... ................. ...................... 191 Pinouts an d Wirin g Illustra tions for Modbus Plus Netwo rks ............... ........... 194 Modbus P lus Addresses .....
Contents 870 USE 101 1 0 V.2 xi Chapter 10 Configuring a Modbus Plus Network in Modsoft with P e er C o p ..... .. .... .. ... .... .. ... .... .. .. ..... .. .. ..... .. .. .... ... .. .... .. ... .... 257 Section 1 0.1 Getting Started ..............
Contents xii 870 USE 101 10 V.2 Overview .. ........... ............ ................ ............................. ............................ ..... 327 Reserving and Monitoring a Ba ttery Coil ................ ...................... ...............
Contents 870 USE 101 1 0 V.2 xiii Specifyi ng Refere nc es for Output Data .................. ...... ..... ...... ..... ...... ........... 384 Section 1 4.3 Passing Supervisory Data o ver Modb us Plus .............. ...................... ...........387 Overvie w .
Contents xiv 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 15 About This Book Revision History This is version 2.0 of this ma nual, 870 USE 101 1 x , which replaces 8 70 USE 101 0 x . The follo wing in formation has been added or changed : The most recent version of this manual is available o n our web site, www .
About This Book 16 870 USE 101 10 V.2 About Book Document Sc ope This man ual cont ains c omplete informatio n about the M omentum M1 Proces sor Adapters, O ption Ada pters a nd Ethernet Adapters. It doe s not contai n information about M omentum I/O bas es or Co mmunica tion Adapt ers.
870 USE 101 1 0 V.2 17 Getting St arted At a G l anc e Purpose This part des cribe s the M1 Processor Adapters an d Option Adapte rs and exp lains how to a ssemble th em. In This Part This p art co ntains the follo wing chapters: For Information On. .
Getting Started 18 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 19 Overview of Momentum M1 Processor Adapters At a G l anc e Purpose A Moment um M1 Processor Adapter ca n be snap ped on to a Mom entum I/O base to create a ce ntral processing uni t (C PU) that pr ovides programmabl e lo gic co ntrol to local and distribu ted I/O.
Overview of Momentum M1 Processor Adapters 20 870 USE 101 10 V.2 Section 1.1 Introducing the M1 Processor Adapters Overview Purpose A Mo me ntum M1 Proc es sor Adapter st ores and executes the applic ati on p r ogra m, controlli ng the local I/O poin ts of i ts host I/ O base a nd dis tributed I/ O devices on a common communica tion b us.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 21 Front Panel i llustration Introduction This s ectio n pro vid es an il lus trat io n of a t ypi cal M1 P roce ssor A dapt er .
Overview of Momentum M1 Processor Adapters 22 870 USE 101 10 V.2 Overview of Port s Introduction Eac h Process or Adapt er is equi pped wi th at leas t one Mod bus or Ethernet port .
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 23 Overview of Port s, Continued Modbus Port 2 Modbus Port 2 is a gen eral-purpos e asynchronous s erial port with dedicated RS485 s lave f unctional ity . This port has a 9-pin D c onnecto r .
Overview of Momentum M1 Processor Adapters 24 870 USE 101 10 V.2 Memory and Performance Characteri stics Introduction Proc essor Ada pters are e quipped with i nternal me mory and Flash RAM. Thi s section explains thos e two typ es of memor y and des cribes th e memory size and performanc e charac teristi cs of eac h Process or Adapter .
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 25 Memory and Performance Characteristi cs, Cont inued Memory Size and Clock Spee d The m emory size and clock speed of each p rocessor .
Overview of Momentum M1 Processor Adapters 26 870 USE 101 10 V.2 Memory and Performance Characteri stics, Cont inued Input and Outpu t References The numb er of reg isters (for 3 x and 4 x reference s.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 27 Power Supply Supplied by Base A Pro cessor Adapter req uires 5 V , whic h is sup plied by its I/O bas e. Note: For info rmation a bout the 171 CPS 1 1 1 00 TIO Power Sup ply Modu le, refer to 870 Use 00 2 00 V .
Overview of Momentum M1 Processor Adapters 28 870 USE 101 10 V.2 Section 1.2 Features of E ach Processor Adapter Overview Purpose This s ection p rovide s a photo graph, des cription o f key fea tures and LEDs, and specific ations f or each Proc essor Ada pter .
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 29 171 CCS 700 00 Overvie w This section d escribes the 1 71 CCS 700 00 Proc essor Adapter , including key feature s, an ill ustrati on and sp ecifications.
Overview of Momentum M1 Processor Adapters 30 870 USE 101 10 V.2 171 CCS 700 00 , Continued LED Indicato r s This Processor Adapter has two LED indicators, RUN and COM ACT .
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 31 171 CCS 700 00, Continued Specifications , Continue d Mechanical Weight 42.5 g (1.5 oz.) Dimensions (HxDxW) 25.9x61.02x125mm (1.01 x 2.37 x 4.86 in) Material (Enclosures/ bezels) Lexan Operating Condition s T emperature 0 .
Overview of Momentum M1 Processor Adapters 32 870 USE 101 10 V.2 171 CCS 700 10 Overv iew This sectio n descri bes the 17 1 CCS 700 10 Proc essor Adap ter , inclu ding key feat ures , an il lus trat ion an d spe cifi cat ions.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 33 171 CCS 700 10, Continued LED Indicators This Processor Adapter has two LED indicators, RUN and COM ACT .
Overview of Momentum M1 Processor Adapters 34 870 USE 101 10 V.2 171 CCS 700 10 , Continued Specifica tions, Conti nued Mechanical Weight 42.5 g (1.5 oz.) Dimensions (HxDxW ) 25.9x61.02x125mm (1.01 x 2.37 x 4.86 in) Material (Enclosures/ bezels) Lexan Operating Condi tions T emperature 0 .
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 35 171 CCS 760 00 Overvie w This section d escribes the 1 71 CCS 760 00 Proc essor Adapter , including key feature s, an ill ustrati on and sp ecifications.
Overview of Momentum M1 Processor Adapters 36 870 USE 101 10 V.2 171 CCS 760 00 , Continued LED Indicato r s This Processor Adapter has two LED indicators, RUN and COM ACT .
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 37 171 CCS 760 00, Continued Specifications , Continue d I/O Servicing Local I/O Services all the point s on any host Momentum I/O base Wat chdog timeout 419 ms Logic solve time 0.25 ms/k ladder logic instructions Mechanical Weight 42.
Overview of Momentum M1 Processor Adapters 38 870 USE 101 10 V.2 171 CCC 760 10 Overv iew This secti on describes the 171 CCC 760 10 Processor Adapter , including ke y feat ures , an il lus trat ion an d spe cifi cat ions.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 39 171 CCC 760 10, Continued LED Indicators This Processor Adapter has two LED indicators, RUN and COM ACT .
Overview of Momentum M1 Processor Adapters 40 870 USE 101 10 V.2 171 CCC 760 10, Continued Specifica tions, Conti nued I/O Servici ng Local I/O Services all the point s on any host Momentum I/O base Wat chdog timeout 262 ms Logic solve time 0.16 ms/k ladder logic instructions Mechanical Weight 42.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 41 171 CCS 780 00 Overvie w This section d escribes the 1 71 CCS 780 00 Proc essor Adapter , including key feature s, an ill ustrati on and sp ecifications.
Overview of Momentum M1 Processor Adapters 42 870 USE 101 10 V.2 171 CCS 780 00 , Continued LED Indicato r s This Processor Adapter has two LED indicators, RUN and COM ACT .
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 43 171 CCS 780 00, Continued Specifications , Continue d Mechanical Weight 42.5 g (1.5 oz.) Dimensions (HxDxW) 25.9x61.02x125mm (1.01 x 2.37 x 4.86 in) Material (Enclosures/ bezels) Lexan Operating Condition s T emperature 0 .
Overview of Momentum M1 Processor Adapters 44 870 USE 101 10 V.2 171 CCC 780 10 Overv iew This secti on describes the 171 CCC 780 10 Processor Adapter , including ke y feat ures , an il lus trat ion an d spe cifi cat ions.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 45 171 CCC 780 10, Continued LED Indicators This Processor Adapter has two LED indicators, RUN and COM ACT .
Overview of Momentum M1 Processor Adapters 46 870 USE 101 10 V.2 171 CCC 780 10, Continued Specifica tions, Conti nued Mechanical Weight 42.5 g (1.5 oz.) Dimensions (HxDxW ) 25.9x61.02x125mm (1.01 x 2.37 x 4.86 in) Material (Enclosures/ bezels) Lexan Operating Condi tions T emperature 0 .
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 47 171 CCC 960 20 Overvie w This section describes the 171 CCC 960 20 Proces sor Adapter , including ke y feat ures , a i llust rati on an d spec ific a tio n s.
Overview of Momentum M1 Processor Adapters 48 870 USE 101 10 V.2 171 CCC 960 20, Continued LED Indicato r s This Processor A dapter has three LED in dicators, RUN, LAN ACT( IVE), and LAN ST(A TUS).
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 49 171 CCC 960 20, Continued Specifications , Continue d Continued on next page Input and O utput References Registers 26048 Discretes 8.
Overview of Momentum M1 Processor Adapters 50 870 USE 101 10 V.2 171 CCC 960 20, Continued Specifica tions, Conti nued Scantime Formula for 984LL Ex ec The followi ng formula appl ies to the M1E Processor Adapte r with the 98 4LL exec . Scan time = (0.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 51 171 CCC 960 30 Overvie w This section describes the 171 CCC 960 30 Proces sor Adapter , including ke y features, an illus tration and spec ification s .
Overview of Momentum M1 Processor Adapters 52 870 USE 101 10 V.2 171 CCC 960 30, Continued Illustrat ion The conne ctors and LED i ndicators are shown in the fol lowing illustrati on: Label Descriptio.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 53 171 CCC 960 30, Continued LED Indicators This Proc essor Adapter h as three L ED indicators, RUN, LAN ACT (IVE), and LAN ST(A TUS).
Overview of Momentum M1 Processor Adapters 54 870 USE 101 10 V.2 171 CCC 960 30, Continued Specifica tions, Conti nued Continued on next page 984LL Input and Output References Registers 26048 Discrete.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 55 171 CCC 960 30, Continued Specifications , Continue d Scantime Formula for 984LL Exec The follo wing form ula appl ies to the M1E Pro cessor Ad apter wit h the 984L L exec. Scan t ime = (0.
Overview of Momentum M1 Processor Adapters 56 870 USE 101 10 V.2 171 CCC 980 20 Overv iew This secti on describes the 171 CCC 980 20 Processor Adapter , including ke y feat ures , an il lus trat ion an d spe cifi cat ions.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 57 171 CCC 980 20, Continued LED Indicators This Proc essor Adapter h as three L ED indicators, RUN, LAN ACT (IVE), and LAN ST(A TUS).
Overview of Momentum M1 Processor Adapters 58 870 USE 101 10 V.2 171 CCC 980 20, Continued Specifica tions, Conti nued Continued on next page Input and O utput References Registers 26048 Discretes 819.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 59 171 CCC 980 20, Continued Specifications , Continue d Scantime Formula for 984LL Exec The follo wing form ula appl ies to the M1E Pro cessor Ad apter wit h the 984L L exec. Scan t ime = (0.
Overview of Momentum M1 Processor Adapters 60 870 USE 101 10 V.2 171 CCC 980 30 Overv iew This secti on describes the 171 CCC 980 30 Processor Adapter , including ke y feat ures , an il lus trat ion an d spe cifi cat ions.
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 61 171 CCC 980 30, Continued Illustration The c onnect ors and LED ind icators a re shown in the followi ng ill ustration : Continued on.
Overview of Momentum M1 Processor Adapters 62 870 USE 101 10 V.2 171 CCC 980 30, Continued LED Indicato r s This Processor A dapter has three LED in dicators, RUN, LAN ACT( IVE), and LAN ST(A TUS).
Overview of Mom entum M1 Processor Adapters 870 USE 101 1 0 V.2 63 171 CCC 980 30, Continued Specifications , Continue d Continued on next page 984LL Input an d Output References Registers 26048 Discr.
Overview of Momentum M1 Processor Adapters 64 870 USE 101 10 V.2 171 CCC 980 30, Continued Specifica tions, Conti nued Scantime Formula for 984LL Ex ec The followi ng formula appl ies to the M1E Processor Adapte r with the 984LL ex ec. Scan time = (0.
870 USE 101 1 0 V.2 65 Overview of Momentum Op tion Adapters At a G l anc e Purpose An Op tion Adapte r can b e inserted between the Proces sor Adapte r and the I/O base to p rovide: l A battery backu p for the CPU l A time-of-day clock l Extra com munica tion port s This cha pter de scribes the three types o f Momentum Optio n Adapte rs.
Option Adapters 66 870 USE 101 10 V.2 Section 2.1 Introducin g the Momentum Option Adap ters Basic Features of Option Adapters Introduction Thi s sectio n descri bes the ba sic f eatures of all Option.
Option Adapters 870 USE 101 1 0 V.2 67 Section 2.2 Serial Option Adapter Overview Purpose This section d escribes the 172 J NN 210 32 Serial Option Ad apter , including th e front p anel component s and speci fications. In This Sectio n This s e ctio n incl ude s t he fo llowi ng t opics : For This T opic.
Option Adapters 68 870 USE 101 10 V.2 Front Panel Component s Overv iew The front p anel includ es: l An LED indicat or l Battery comp artment l Modbus Port 2 conn ector Illustrat ion The illu stra tion below show s th e lo catio n of L ED i ndica tor, the ba tter y compar tme nt, and the M odbus Port 2 connector .
Option Adapters 870 USE 101 1 0 V.2 69 Front Panel Component s, Continued LED Indicat or This Option Adapter ha s one LED indic ator , the Com Act indi cat or . It s funct ions are describe d in the t able belo w . Modbus Port 2 Modbus Port 2 is a gen eral-purpos e asynchronous s erial port with user-select able RS232/R S485 slave functi onality .
Option Adapters 70 870 USE 101 10 V.2 Front Panel Component s, Continued Pinout s for Modbus P ort 2 The 17 2 JNN 210 32 Seri al Optio n Adapter us es the following pinou ts: Pin For RS232 For RS485 1.
Option Adapters 870 USE 101 1 0 V.2 71 Specifica tions Specifications This sect ion pr ovides the sp ecificati ons for the 172 J NN 21 0 32 Moment um Seri al Option Ad apter: Continued on next page Mechanical Weight 85.05 g (3 oz.) Dimensions (HxDxW) 58.
Option Adapters 72 870 USE 101 10 V.2 Specificat ions, Continued Specifica tions, Conti nued RFI Susceptibility/ immunity Meets CE mark requirements for open equipment. Open equipment should be installed in an industry-standard enclosure, with access restricted to qualified service personnel.
Option Adapters 870 USE 101 1 0 V.2 73 Section 2.3 Modbu s Plus Op tion Adapter Overview Purpose This s ection des cribes the 17 2 PNN 210 22 Mo dbus Plus Optio n Adapter , including the front p anel compon ent s and sp ecifications. In This Sectio n This section cont ains the follow ing top ics: For This T opic.
Option Adapters 74 870 USE 101 10 V.2 Front Panel Component s Overv iew The front p anel includ es: l An LED indicat or l Battery comp artment l Addre ss swi t ches l 9-pin D -shell connect or for Mod.
Option Adapters 870 USE 101 1 0 V.2 75 Front Panel Component s, Continued LED Indicator This Optio n Adapter ha s one LED indi cator , the MB+ ACT in dicator .
Option Adapters 76 870 USE 101 10 V.2 Front Panel Component s, Continued Modbus P lus Address Switches The two rot ary switch es o n the Option Adapte r ar e used to s et a Modb us Pl us node addr ess fo r the CPU mo du le. T he swi tches are sh own i n the f o llowi ng ill ustr atio n.
Option Adapters 870 USE 101 1 0 V.2 77 Specificati ons Specifications Thi s sec tion pr ovides the sp ecificati ons for the 172 PN N 210 22 Mome ntum Serial Option Ad apter: Continued on next page Mechanical Weight 85.05 g (3 oz.) Dimensions (HxDxW) 58.
Option Adapters 78 870 USE 101 10 V.2 Specificat ions, Continued Specifica tions, Conti nued RFI Susceptibility/ immunity Meets CE mark requirements for open equipment. Open equipment should be installed in an industry-standard enclosure, with access restricted to qualified service personnel.
Option Adapters 870 USE 101 1 0 V.2 79 Section 2.4 Redundan t Modbus Plus Option Adapter Overview Purpose This section d escribes the 172 PN N 260 22 Redu ndant Mod bus Plus Optio n Adapter , includi ng the fron t panel com ponent s and speci fications .
Option Adapters 80 870 USE 101 10 V.2 Front Panel Component s Overv iew The front p anel includ es: l T wo 9-pin D -shell connectors f or Modbus Plus communi cations l Three LED indicat ors l Battery .
Option Adapters 870 USE 101 1 0 V.2 81 Front Panel Component s, Continued LED Indicators This Opti on Ad ap ter h as th ree L ED in d icat ors. Their func tio ns are desc r ibe d i n th e tab le below .
Option Adapters 82 870 USE 101 10 V.2 Front Panel Component s, Continued MB+ ACT Flash Patterns This table prov ides the patter ns t hat t he MB+ AC T in dica tor will flas h to indi cate th e sta tus of the Modbus Plus n ode. Continued on next page Pattern Meaning 6 flashes/s Thi s is the normal operating st a te for the node.
Option Adapters 870 USE 101 1 0 V.2 83 Front Panel Component s, Continued Modbus Plus Address Switches The two rot ary swi tches on the Option Adapt er are used to set a Modbus Plus nod e address for the CPU modul e. The switches a re show n in the fo llowing illustra tion.
Option Adapters 84 870 USE 101 10 V.2 Specificat ions Specifica tions This section pr ovides t he speci fications for the 172 PNN 2 60 22 Momen tum Serial Option Ad apter: Continued on next page Mechanical Weight 85.05 g (3 oz.) Dimensions (HxDxW ) 58.
Option Adapters 870 USE 101 1 0 V.2 85 Specificati ons, Continued Specifications , Continue d RFI Susceptibility/ immunity M eets CE mark requirem ents for open equipment. Open equipment should be installed in an industry-standard enclosure, with access restricted to qualified service personnel.
Option Adapters 86 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 87 Assembling M omentum Compon ent s At a G l anc e Purpose This chapte r describ es how t o assemble an d disa ssembl e a Mome ntum M1 CPU, using th e following co mponent s: l Processor Adapte r l I/O Base l Option Adap ter l Label It also d escribes how to ins tal l batteries in the O ption Adapter .
Assembling Momentum Components 88 870 USE 10 1 10 V.2 Section 3.1 Assembling a CPU Overview Purpose This sec ti on des cri bes h ow to as s emble a Processor Adapter w ith an I/O b ase and how to d isassem ble th em. In This Se ction This sec tion c ontai ns the followi ng topi cs: For This T opic.
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 89 Assembling a Processor Adapter and I/O Base Overvie w A Process o r Adapter can be s napped d i rectly onto a Mom entum I/O base , making connect.
Assembling Momentum Components 90 870 USE 10 1 10 V.2 Assembling a Processor Adapter and I/O Base, Continued Procedu r e: Assemblin g a Proces sor Adapte r and an I/O B ase Follow the step s in the t able bel ow to as semb le a Pro cessor Ad apter an d an I/ O base.
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 91 Assembling a Processor Adapter and I/O Base, Continued Procedure: Assembli ng a Processor Adapter and an I/O Base, Continue d Next S tep Once the Proc es sor Ad ap ter has been assem bl ed , it can be mounted on a D IN rail or surface mounted insid e a p anel en closure.
Assembling Momentum Components 92 870 USE 10 1 10 V.2 Disassembling a Processor Adapter fr om an I/O Base Overv iew This sectio n cont ains safety pre cautions and a pro c edure for disas sembling a Processor Adapter from an I/O b ase. T ools Required A flat-head screw driver .
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 93 Disassembling a Processor Adapter from an I/O Base, Continued Procedure: Disassem blin g an Adapter from an I/O Base , Continue d Step Action 3 Use a screwdr iver to push the clips on both sides of the Processor Adapter inwar d, as shown in the illustration below .
Assembling Momentum Components 94 870 USE 10 1 10 V.2 Section 3.2 Assembling a CPU with an Option Adap ter Overview Purpose An Opt ion Adapter can only be us ed in con junction with a Pr ocessor Adapter .
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 95 Assembling a Processor Adapter and an Option Adapter Overvie w If a Mome ntum Op tion Adapter is us ed, it is moun ted between a M omentum M1 Processor Adapter and a Mo mentum I/ O base i n a three-tiered st ack.
Assembling Momentum Components 96 870 USE 10 1 10 V.2 Assembling a Processor Adapter and an Option Adapter , Continued Procedu r e: Assemblin g an Option Adapter and Pro cessor Follow the step s in the t able bel ow to as semb le an o ption ada pter and an M1 processo r .
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 97 Assembling a Processor Adapter and an Option Adapter , Continued Next S tep Follow the d irec tio ns in t he next sec tion t o mou n t the a ssem ble d adap ters on th e I/O base .
Assembling Momentum Components 98 870 USE 10 1 10 V.2 Mounting t he Assembled Adapters on the I /O Base Overv iew This sect io n g iv es gui del ine s, safety preca uti ons an d a procedure for m ou nti ng the assembl ed Processor an d Option Adapter on an I/ O base.
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 99 Mounting the Asse m bled Adapters on the I/O Bas e, Continued Procedure: Mounting the Assemble d Adapters on an I/O Base Follow the steps in the tab le below to mount th e assem bly on an I/O base .
Assembling Momentum Components 100 870 USE 10 1 10 V.2 Mounting t he Assembled Adapters on the I /O Base, Continued Procedu re: Mounting the Assemble d Adapters on an I/O Base , Conti nued Step Action 3 Push the assembled adapters onto the base, gently pressing the locking tabs inward.
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 101 Disassembling a Module with an Option Adapter Overvie w The th ree-tiered a ssembly is designed to fi t together t ightly , so it c an withst and shock a nd vibration in an operating e nvironm ent.
Assembling Momentum Components 102 870 USE 10 1 10 V.2 Disassembling a Module with an Option Adapter , Continued Procedu r e: Removing the Adapter Assembly from the I/ O Base Follow the step s in the table below to remov e the ass embled Op tion Adapter and M1 Proces sor Adapte r from the I/ O base.
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 103 Disassembling a Module with an Option Adapter , Continued Procedure: Removing the Ada p te r Assembly from the I/O Base, Continue d Continued on next page Step Action 4 Once snaps 1 and 2 have been disen gaged, use the screwdriver to release snaps 3 and 4 on the front of the assembly .
Assembling Momentum Components 104 870 USE 10 1 10 V.2 Disassembling a Module with an Option Adapter , Continued Procedu r e: Disassem bling an Option Adapte r and M1 Proces sor Follow the step s in the tab le below to remove t he Option Adapter from the M1 processo r .
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 105 Section 3.3 Inst alling Batteries in an Option Adapter Inst allation Guidelines Why Inst all Batteries? If you are using a Momentum O ption Adap ter in your CPU assemb ly , you have a battery-ba c kup capab ility .
Assembling Momentum Components 106 870 USE 10 1 10 V.2 Inst allation Guidelines, Continued Leav e Powe r On When Chang ing Batteries Once yo ur CPU has be en comm issione d and i s running , main tai n power t o the module w hene ver you c hange the batteri es.
Assembling Momentum Compone nts 870 USE 101 1 0 V.2 107 Section 3.4 Labelin g the CPU Guidelines for Labeli ng the CPU Overvie w A fill-i n label i s shippe d with e ach I/O b ase. This label s hould be placed on the M 1 Processor Adapter tha t you mou nt on t hat base.
Assembling Momentum Components 108 870 USE 10 1 10 V.2 Guidelines for Labeli ng the CPU, Continued Example of a Fill-In Lab el A f ill -in la bel is il lus trat ed b elow.
870 USE 101 1 0 V.2 109 Communicatio n Port s At a G l anc e Purpose This part des cribe s the com munica tion port s available wi th TSX Momentum Processor Ada pters and Option Adapte rs . In This Part This p art co ntains the follo wing chapters: For Information On.
Communication Ports 110 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 111 Using the M odbus Ports At a G l anc e Purpose This chapte r describ es Mo dbus Po rt 1 and M odbus Port 2, inc luding commun icati on pa rameters, c ablin g guide l ines for M odbus RS485 netwo rks, cable access ori es and pinouts.
Using the Modbus Ports 112 870 USE 10 1 10 V.2 Section 4.1 Modbus Port 1 Overview Purpose Modbu s Port 1 is st andard on all Mome ntum M1 Processor Adapters, excep t the 171 CCC 960 20 and 171 CCC 980 20, 171 CCC 960 30 and 171 CCC 980 30 ethernet ad apters .
Using the Modbus Ports 870 USE 101 1 0 V.2 113 Modbus Port 1 Introduction Modb us Port 1 is an RS232 asynch ronous s erial port that pe rmits a hos t compu ter to comm unicate t o the CPU for: l Programming l Data tra nsfer l Upload /downlo ad l Other ho st ope rations This sec tion des cribes th e port.
Using the Modbus Ports 114 870 USE 10 1 10 V.2 Modbus Port 1, Continued Port Paramete rs Mod bus Po rt 1 s upp orts th e f oll owin g com m u nic ation parame ters .
Using the Modbus Ports 870 USE 101 1 0 V.2 115 Modbus Port 1, Continued Default Parameters The fa ctory-set default commun ication p arameters for Modbus Po rt 1 are: l 9600 bau d l EVEN pari ty l 8-bit RTU m ode l 1 stop bit l Modbus addres s A Process or Adapter cannot s upport mo re than one stop bit.
Using the Modbus Ports 116 870 USE 10 1 10 V.2 Cable Accessories for Modbus Port 1 Overv iew This sect ion des cribes th e cable and D-s hell adapter s needed to connect Mod bus Port 1 to a p rogramming st ation . It also p rovide s pinout s for the adap ters.
Using the Modbus Ports 870 USE 101 1 0 V.2 117 Pinout s for Modbus Port 1 Overvie w This sec tion p rovides pinout s for the D-shel l adap ters for Mo dbus Port 1.
Using the Modbus Ports 118 870 USE 10 1 10 V.2 Pinout s for Modbus Port 1, Continued 1 10 XCA 20 4 00 Pinout The pi nout fo r this adap ter is sh own in the illust ration below:.
Using the Modbus Ports 870 USE 101 1 0 V.2 119 Section 4.2 Modbu s Port 2 Overview Purpose Five Momen tum com ponent s offer th is port : l 171 CCS 7 80 00 Processor Adapter l 171 CCC 780 10 Processor.
Using the Modbus Ports 120 870 USE 10 1 10 V.2 Modbus Port 2 Tw o Ty p e s o f Port Modbu s Port 2 is available in two ty pes: Featu res of an RS485 Port Modbu s Port 2 can be c onfigured as an RS485 port. RS 485 sup port s two-w ire or four-wire cabling.
Using the Modbus Ports 870 USE 101 1 0 V.2 121 Modbus Port 2, Continued Port Parameters Modb us Port 2 offers the following c ommunic ation p arameters: Continued on next page Baud 50 1800 75 2000 1 1.
Using the Modbus Ports 122 870 USE 10 1 10 V.2 Modbus Port 2, Continued Default Parameters The factor y-set defa ult comm unica tion p arameters for Mod bus Port 2 are: l 9600 baud l EVEN parit y l 8-.
Using the Modbus Ports 870 USE 101 1 0 V.2 123 Four-Wire Cabling Schemes for Modbus RS485 Networks Introduction Four-w ire ca bling sc hemes may be used for s ingle master/s lave communi catio ns. Only on e master is allowed. Th e mast er may b e located anyw here in th e network.
Using the Modbus Ports 124 870 USE 10 1 10 V.2 Four-W ire Cabling Schemes for Modbus RS485 Networks, Continued Slave Cabl ing The slav es use a pin-for- pin cable, s uch as th e Mod bus Plus / Modbus RS485 Short Int erconnec t Cable or any Ca t. 5 4-T wisted Pair Ether net cable A WG#24.
Using the Modbus Ports 870 USE 101 1 0 V.2 125 Four-Wire Cabling Schemes for Modbus RS485 Networks, Continued Single Maste r/ Slave Option 2 The follow ing illustra tion shows com ponents us ed in a four-wire single mast er/slave cabling scheme.
Using the Modbus Ports 126 870 USE 10 1 10 V.2 T wo-Wire Cabling Schemes for Modbus RS485 Networks Introduction T wo-w ire ca bl ing scheme s may be used for s ingle maste r/sla ve or m ul tim aster / slave c ommunic ations . Masters may be located anyw here in the netw ork.
Using the Modbus Ports 870 USE 101 1 0 V.2 127 T wo-Wire Cabling Schemes for Modbus RS485 Networks, Continued Cable All de vices are connec ted with the sa me pin- for-pin cable, such a s the Mod bus Plus or M odbus R S485 Shor t Interconn ect Cab le or any Cat.
Using the Modbus Ports 128 870 USE 10 1 10 V.2 T wo-Wire Cabling Schemes for Modbus RS485 Networks, Continued Single Ma ster/ Slave Cabl ing The fol lowing illus tration sh ows compone nts used for s ingle master/s lave commun icatio ns in a two-wire cabling schem e.
Using the Modbus Ports 870 USE 101 1 0 V.2 129 Cable for Modbus RS485 Networks Overvie w This section d escribes the c ables w hich sh ould b e used in constructing a n RS48 5 network for Mome ntum com ponents. Master Communication Cable This cab le is required fo r master/slave commun ications in a four-wi re cabl ing scheme .
Using the Modbus Ports 130 870 USE 10 1 10 V.2 Cable for Modbus RS485 Networks, Continued Inte rc onnec t Cables Cabl e fo r co nn ect ing two Modbus R S48 5 devices, su ch as Mome ntum modules, i s availabl e from Schnei der Auto mation in four lengths.
Using the Modbus Ports 870 USE 101 1 0 V.2 131 Cable for Modbus RS485 Networks, Continued Other Prem ade Cable Interconn ect and Ethernet c able in v arious le ngths and boot c olors ma y be obtai ned from other ve ndors, includin g Amp: Custom Cabl e For cus tom ca bli ng, us e Cat .
Using the Modbus Ports 132 870 USE 10 1 10 V.2 Connectors f or Modbus RS485 Networks Overv iew This sectio n descri bes the c onnectors which should b e used in constructing a n RS485 ne twork for Mome ntum com ponent s . RJ45 Conne ctor “T” This connec tor is used with the RS485 port on the 17 2 JNN 210 32 O ption Adapte r .
Using the Modbus Ports 870 USE 101 1 0 V.2 133 Connectors for Modbus RS485 Networks, Continued Connectors for Custom Cabl ing This RJ45 co nnector shoul d be used when co nstructing cust om cable for an RS48 5 network.
Using the Modbus Ports 134 870 USE 10 1 10 V.2 T erminating Devices for Modbus RS485 Networks Overv iew This sect ion des cribes te rminating devic es whi ch sh ould be u s ed in construc ting Modbus R S485 networks for Momentum devices .
Using the Modbus Ports 870 USE 101 1 0 V.2 135 Pinout s for Modbus RS485 Networks Overvie w This section c ont ains pin outs for wi ring an RS485 ne twork for Mome ntum comp onent s.
Using the Modbus Ports 136 870 USE 10 1 10 V.2 Pinout s for Modbus RS485 N etworks, Continued 9-Pin D-Shell Pinout The il lustration below show s the p inout s for w iring a m ale 9-p in D-sh ell co nnect or for RS485. The me tal she ll is co nne ct ed to c hass is gro und.
Using the Modbus Ports 870 USE 101 1 0 V.2 137 Pinout s for Modbus RS485 Networks, Continued Master Communication Cable The illus tration below shows t he pinout for t he 170 MC I 041 10 Modb us RS485.
Using the Modbus Ports 138 870 USE 10 1 10 V.2 Pinout s for Modbus RS485 N etworks, Continued Modbus RS4 85 Connector “ T” (DB9 Base) The illus trat ion bel ow shows the pi nou t for t he M od bus.
Using the Modbus Ports 870 USE 101 1 0 V.2 139 Pinout s for Modbus RS485 Networks, Continued Modbus RS485 Connector “T” (RJ45 Base ) The illu stration b elow show s the pino ut for the M odbus RS4.
Using the Modbus Ports 140 870 USE 10 1 10 V.2 Pinout s for Modbus RS485 N etworks, Continued T erminating Resistor Plug s The illustrat ion below s hows t he pinout for the Modbus Pl us or Mod bus RS.
870 USE 101 1 0 V..2 141 Using the Ethernet Port At a G l anc e In This Chapter This chap ter c ontai ns the follo wing secti ons : For This T opic.. .
Using the Ethernet Port 870 USE 101 1 0 V..2 142 Section 5.1 Ether net Port Purpose Ethernet por t s are availa bl e wit h : l 171 CCC 960 20 Processor Adapters l 171 CCC 960 30 Processor Adapters l 171 CCC 980 20 Processor Adapters l 171 CCC 980 30 Processor Adapters In This Se ction This Sect ion conta ins the fo llowing topics: For This T opic.
Using the Ethernet Port 870 USE 101 1 0 V..2 143 Ethernet Port Introduction The Et hern et por t all ows a P roce ssor A dapt er to conn e ct to an Et hern et net work for: l high-sp eed I/O s ervicin.
Using the Ethernet Port 870 USE 101 1 0 V..2 144 Network Design Considerat ion s Introduction In a distribu ted control envi ronment, Et hernet can be us ed as: l an I/O ne twork l a superv isory ne t.
Using the Ethernet Port 870 USE 101 1 0 V..2 145 Network Design Considerations, Continued I/O Networks In an Ethe rnet I/O netw ork archit ecture, an M1 Proce ssor Adapter is used to control Momentu m I/O poi nts equippe d with a n Ethernet C ommuni cation Ada pter or othe r Modbus over TCP/IP Etherne t-aware device s.
Using the Ethernet Port 870 USE 101 1 0 V..2 146 Securi ty Overv iew T o rest rict acces s to your Ethernet controlle r and I/O n e twork, you m ay want to conside r a firewa ll.
Using the Ethernet Port 870 USE 101 1 0 V..2 147 Cabling Schemes Introduction In a s tandard Etherne t cabling sc heme, ea ch device con nect s via a cabl e to a port on a cen tral Ethe rnet hub.
Using the Ethernet Port 870 USE 101 1 0 V..2 148 Pinout s Overv iew This sectio n cont ains pinout s for wiring an Ethernet net work for Momen tum comp onent s.
Using the Ethernet Port 870 USE 101 1 0 V..2 149 Assigning Ethernet Address Paramet ers Overvie w As sh ipped fr om the fac tory , the M1 Et hernet Proce ssor d oes not c ontai n an IP address. This is also t rue if you have not programmed the unit with an Ethernet configura tion extension.
Using the Ethernet Port 870 USE 101 1 0 V..2 150 Assigning Ethernet Address Paramet ers, Continued When the Proces sor Adapter is Powered-up with a Configurati on for “Use Bootp Server” If the pr .
Using the Ethernet Port 870 USE 101 1 0 V..2 151 Assigning Ethernet Address Paramet ers, Cont inued When the Processor Adapter is Power-up with a Configuration for “Specify IP Address” If the pr o.
Using the Ethernet Port 870 USE 101 1 0 V..2 152 Using BOOTP Lite to Assign Address Parameters Specifying Address es/ S topping the Proces sor Instead of a BOO TP serve r , Schn eider Ele ctric’s BOOTP Lite utility software c an be used to provide the IP address, subnet mask and default gateway to the process or .
Using the Ethernet Port 870 USE 101 1 0 V..2 153 Reading Ethernet Network S tatist ics Overvie w Etherne t Netwo rk st atistic s are s tored i n the p rocesso r adapter and c an be vi ewed by the us er . Procedure The M1 ethern e t Processor Adap ter ’s Ethernet Network S tatistic s can be viewe d using the N etwork Opti ons Ether net T es ter .
Using the Ethernet Port 870 USE 101 1 0 V..2 154 Descripti on Operational St atistics W ords 4, 5 Recei ve Interrupt s Number of fr ames received by this s tation . Only broadca st frames pertinent to this sta tion and individual add ress matc h fram es are rec eived an d counted.
Using the Ethernet Port 870 USE 101 1 0 V..2 155 Descripti on, Continue d Words 16 , 17 High Word : Not used, always 0 Low W ord : Peak C ollisio n Detec tor This fiel d con tai ns the num ber of consecu tive collisio ns tha t occurred before the frame wa s su ccessf ully transmit ted o ut on to the Ethernet.
Using the Ethernet Port 870 USE 101 1 0 V..2 156 Descripti on, Continued Wo rds 24 , 25 Recei ve Buffer Errors Incremen ts wh enever a client attempt s to co nnect to the M1 Et hernet, and fails, bec a use t here is no av ail abl e s erv er path .
Using the Ethernet Port 870 USE 101 1 0 V..2 157 Descripti on, Continue d Word s 30, 31 Late Collision Increment s when the transm it frame proces s is aborted bec ause of late co llision detected after th e first 64 b ytes of the fr ame was tra nsmitted collis ion free.
Using the Ethernet Port 870 USE 101 1 0 V..2 158 Section 5.2 Est a blishing a Connection with an Ethernet Module Overview Introduction Thi s Section presents a n overv iew of th e procedu re for connecting to an ethernet module that is used a s a web serve r .
Using the Ethernet Port 870 USE 101 1 0 V..2 159 Est ablishing a Connection with an Ethernet Module Procedure Perfo rm the followi ng ste ps to est ablis h a conne ction with an Ethernet mo dule using.
Using the Ethernet Port 870 USE 101 1 0 V..2 160 Est ablishing a Connection with an Ethernet Module, cont inued Procedu r e, contin ued Continued on next page Step Action 2 T ype the module’s IP network address or host name in the IP Address box. Click on the OK button.
Using the Ethernet Port 870 USE 101 1 0 V..2 161 Est ablishing a Connection with an Ethernet Module, contin ued Procedure, contin ued Ste p A ct io n 4 When you are ready to disconnect, select Managem ent and choose Disconnect from the pulldown menu: or click on the disconnect but ton in the t oolbar .
Using the Ethernet Port 870 USE 101 1 0 V..2 162 Section 5.3 Accessing Embedded Web Pages Overview Introduction Thi s Sect ion presen ts a brief overview of acc essing t he embedded w eb pag es contained in the Momentum M1E 171 CCC 960 30 and 171 CCC 980 30 IEC modules.
Using the Ethernet Port 870 USE 101 1 0 V..2 163 Accessing t he W eb Utilit y Home Page Introduction Each Momentum M1E 171 CCC 960 30 and 17 1 CCC 980 30 IEC PLC contains a Wo rld Wide W eb embedde d server that all ows yo u to acce ss diagnostic s and online c onfigurations for the c ontroll er .
Using the Ethernet Port 870 USE 101 1 0 V..2 164 Section 5.4 171 CCC 960 30 AND 171 C CC 980 30 W eb Pages Overview Introduction Thi s Sect ion show s the em bedde d W eb pages conta ined in the Mom entum M1E 171 CCC 960 30 AND 171 CCC 980 30 IEC modules and a brief description of each pag e.
Using the Ethernet Port 870 USE 101 1 0 V..2 165 Momentum M1E Web Pages Momentum M 1E Welcom e Page The Momentum M1E W elc ome Page provid es li nks to the Con troller Configu ration, Ethernet S tatistics , I/O S tatus and Su pport Pa ges. Continued on next page Link Result s Controller S t atus Displays the CP U Configuration page.
Using the Ethernet Port 870 USE 101 1 0 V..2 166 Momentum M1E Web Pages , Conti nued CPU Configuration Page The C PU Configu ration Page enabl es you to moni tor your c ontroll er configu ration and i ts statu s. It has th e foll owin g li nks: Continued on next page Link Result s Home Returns you t o the Home Page.
Using the Ethernet Port 870 USE 101 1 0 V..2 167 Momentum M1E Web Pages , Conti nued M1E I/O S tatus Page The I/ O S tatu s pag e enables yo u to check y our I/O St atus.
Using the Ethernet Port 870 USE 101 1 0 V..2 168 Momentum M1E Web Pages , Conti nued Ethernet S tatis tics The Ethernet S tatistics p age enables you to monit or ether net inf ormation, such as MAC Addre s s, re ceive/tran smit sta tistics and c heck func tioni ng errors.
Using the Ethernet Port 870 USE 101 1 0 V..2 169 Momentum M1E Web Pages , Conti nued Support Page The Sup port p age con tains assi stance infor mation and th e follow ing link s: Link Result s Home Returns you to the Home Page. Controller S t atus Displays the CP U Configuration page.
Using the Ethernet Port 870 USE 101 1 0 V..2 170 Momentum M1E Indicators Proces sor Adapter LED Indicators The Momentum M1E 171 CCC 960 30 AND 171 CCC 980 30 Processor Adapter IEC modu les have three L ED indic ators.
870 USE 101 1 0 V.2 171 Using the I/OBus P ort At a G l anc e Purpose Three Momen tum com ponent s offer I/OBus master c apabi lities: l 171 CCS 760 00 Processor Adapter l 171 CCC 7 60 10 Processor Ad.
Using the I/OBus Port 172 870 USE 101 10 V.2 I/O Bus Port Introduction The I/OB us por t all ow s a M om entum CPU to assu me bus master capabi litie s over as many as 25 5 slave devices over a n Interbus cable. Connector T ype The I/OBus po rt has a female 9-pin D-shell c onnector .
Using the I/OBus Port 870 USE 101 1 0 V.2 173 How I/OBus Wo rks Introduction This section d escribes how si gnals are pa ssed and how dat a is transferred i n an I/OBus network . How Signals Are Passed I/OBus opera tes as a l ogica l ring, with si gnals be ing p assed by the mast er over a remote bu s cable to each s lave dev ice in s eries.
Using the I/OBus Port 174 870 USE 101 10 V.2 Network S tatus Indication in the M1 Ethern et Module Overv iew The M1 Eth ernet Mod ule c an provid e I/OBus net work st atus via the Module St atus function in the programmi ng pan el or b y a ST A T eleme nt in use r logic.
Using the I/OBus Port 870 USE 101 1 0 V.2 175 Guidelines for I/ OBus Networks Overvie w This sect io n gi ves gui del ines f or c r eati ng an I/OB us net work usin g a Mo men tum CPU as bu s master . Length The ma ximum dist ance betw een the Momentum CPU master and the farthest slave is 13 km (8 mi).
Using the I/OBus Port 176 870 USE 101 10 V.2 Guidelines for I/OBus Networks, Continued Network Schem e The slave devi ces are dist ributed al ong a trunk, as shown in the i llustr ation belo w .
Using the I/OBus Port 870 USE 101 1 0 V.2 177 Cable Accessories Overvie w Modi con provi des several ca bling solution s for I/OBus: l Low pro file c ables in two leng ths l A 1m ca ble with hi gh pr o fil e rea r shel l l A connec tor kit for building custo m-length Interbus cables This sec tion des cribes th ose solu tions.
Using the I/OBus Port 178 870 USE 101 10 V.2 Cable Accessories, Continued Inte rbus Ca ble Connector Kit I /OBu s com muni cates over Inte rbus ful l dupl ex ca ble. F or cu stom cable leng ths, Modicon of fers an Inte rbu s cable co nnector kit (p a rt n umber 170 X TS 0 09 00).
Using the I/OBus Port 870 USE 101 1 0 V.2 179 Pinout s Interbus Cable The fo llowing illustrat ion shows how to wire the con nectors of the remote bus cable : Pin Wire Color Outgoing Connection Pin Wi.
Using the I/OBus Port 180 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 181 Using the M odbus Plus Port s At a G l anc e Purpose Modb us Plus port s are av ailab le with: l 172 PNN 210 22 Optio n Adapter (Sin gle Port) l 172 PNN 2 60 22 Option Ada pter (Red undant Ports) This sec tion giv es an ov erview o f Modbus Plus netwo rks for Momentum comp onent s.
Using the Modbus Plus Ports 182 870 USE 10 1 10 V.2 Modbus Plu s Features f or Momentum Introduction Whe n a Mo dbu s Plu s network is constru cte d ent irely of Momentum com po nen t s, it may t ake .
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 183 T wo T ypes of Modbus Pl us Networks I/O Networks a nd Supervisory Net wor ks In a dist ributed contro l environ m ent, Modbus Pl us can be used in .
Using the Modbus Plus Ports 184 870 USE 10 1 10 V.2 T wo T ypes of Modbus Plus Networks, Continued What if I Ne ed Both T ypes? If you r syst em require s both supervis ory an d I/O handling architect.
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 185 St andard Cabling Schemes Introduction In a s tandard Modb us Plus cablin g scheme, each peer d evice c onnect s via a drop cable to a tap alon g a trunk cable. Length The m aximu m len gth of cab le from on e end of the n etwork to the ot her is 1500 ft.
Using the Modbus Plus Ports 186 870 USE 10 1 10 V.2 S t andard Cabling Schemes, Contin ued Momen tum Network This i llustratio n depict s a Mo dbus Pl us network construc ted with a Momentum C PU and Mom entum I/O . One ca ble segment su pports all 64 nodes .
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 187 Cluster Mode Cabling Schemes Introduction In clu ster mo de, Mom entum I/O devic es ma y be pl aced i n smal l group s, c onnec ted by much shorte r lengths of cab le than in standard Mo dbus Plus cabl ing s chemes.
Using the Modbus Plus Ports 188 870 USE 10 1 10 V.2 Cluster Mode Cabling Schemes, Continued T ermination Y ou mu st term inate b oth ends of the network w ith spe c ial terminatin g resistors. Cable Between Nodes in a Cluster The mini mum length of cable b etween n odes in a clus ter is 10 in (.
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 189 Cluster Mode Cabling Schemes, Continue d Cluster Scheme #1 In this e xample, two clus ters of M omentum I/O modu les are c onnected in sequenc e. The trunk cab le continues fro m the c lusters in both directio ns.
Using the Modbus Plus Ports 190 870 USE 10 1 10 V.2 Cluster Mode Cabling Schemes, Continued Cluster Scheme #2 In this ex ample, two c lusters a re conn ected in sequence. The n etwor k ends w ith the se cond clu s ter . Label Description Part Number 1 M odbus Plus T ap 990 NAD 230 00 2 M odbus Plus 10 ft.
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 191 Cable Accessories for Modbus Plus Networks Overvie w This sec tion d escribes the cabl es, conn ector and terminating dev ice which should be used in constru cting a M odbus Pl us net work for M omentum compon ents.
Using the Modbus Plus Ports 192 870 USE 10 1 10 V.2 Cable Accessories for Modbus Plus Networks, Continued Cable Between Clusters Cable fo r connec ting two Modbu s Plus cl usters, o r for fabr icating drop cab les to and from c lusters, is avail able fr om Schnei der Automa tion in two length s.
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 193 Cable Accessories for Modbus Plus Networks, Continued DB9 Connecto r “T” This con necto r is used in cl uster mod e with a Modbu s Plus C ommunic ation Adapter or w ith t he 172 PN N 210 22 or 1 72 PNN 260 22 M odbus Plus Option Adapters.
Using the Modbus Plus Ports 194 870 USE 10 1 10 V.2 Pinout s and Wiring Illustrations for Modbus Plus Networks Overv iew This sect ion con tai ns pin out s and w iring illu strations for constr ucting an Modbus Plu s netw o rk for M o men t um co mponen ts.
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 195 Pinout s and Wiring Ill ust rations for Modbus Plus Networks, Continued Interconnect Cables The fo llowing illus tration shows the pinou t for the 170 MC I 02x xx Modbu s Plus or Modbus RS485 Interconnect Cables (10 in, 3 ft.
Using the Modbus Plus Ports 196 870 USE 10 1 10 V.2 Pinout s and Wiring Illustrati ons for Modbus Plus Networks, Cont inued Modbus P lus Connector “ T” (DB9 Base) The followi ng illu stratio n sho.
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 197 Pinout s and Wiring Ill ust rations for Modbus Plus Networks, Continued T erminating Resistor Plug s The fo llowing illust ration sh ows the pinou t.
Using the Modbus Plus Ports 198 870 USE 10 1 10 V.2 Modbus Plus Addresses Introduction Mo dbus Plus dev ices functio n as peers on a logic al ring. Each dev ice acce sses the network by acqui ring a token fram e that is p assed i n a rot ating address sequenc e.
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 199 Modbus Plus Addresses, Continued Setting Modbus Plus Addresses T wo rotary swi tch es on th e M oment um Option Adapter a re us ed to set th e ne tw ork address. The top sw itch (X10 ) set s the upper digit (t ens) of the ad dress.
Using the Modbus Plus Ports 200 870 USE 10 1 10 V.2 Peer Cop What Is Peer Cop? A Mom entum M1 Processo r Adapter has the a bility to define poi nt-to-point transacti ons between i tse lf and oth er devices on th e Modbus Plus network. The tool for defini ng these transac tions is a pane l software con figuration utili ty known as Peer Cop.
Using the Modbus Plus Ports 870 USE 101 1 0 V.2 201 Pee r Cop, Conti nued How Peer C op Dat a Is Sent an d Received The recep tion of Peer Cop source dat a and the delivery of Peer Cop destinati on data a re handled by th e toke n rotati on. The token is always pas sed to the next logical device in the n etwor k’ s address seq uence .
Using the Modbus Plus Ports 202 870 USE 10 1 10 V.2.
870 USE 101 1 0 V.2 203 Modsoft At a G l anc e Purpose This part des cribes h ow to confi gure an M 1 CPU, how to I/O map an I/OBus network, how to configure a Modbus Plus network wi th Peer Co p and how to save to Flash using Modsoft 2.6. In This Part This p art co ntains the follo wing chapters: For Information On.
.
870 USE 101 1 0 V.2 205 Configuring an M1 CPU with Modsoft At a G l anc e Introduction This chapter ex plains how to co nfigure a C PU us ing Mo dsoft 2.6. The pro cedures and exam ples describe d here can be ap plied with Mo dsoft Lite 2.6 as well. In This Chapter The chap ter contains the following topics.
Configuring an M1 CPU with Modsoft 206 870 USE 101 10 V.2 Section 8.1 Configuring the Processor Adapter Overview Purpose This se ction de scribe s how to co nfigur e a Mom entum M1 Process or Adapter using Modsoft 2 .6. In This Se ction This sec tion c ontai ns the followi ng topi cs: For This T opic.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 207 Selecting an M1 Processor Adapte r Introduction This section d escribes how to select a n M1 Processor Adapt er with Modsoft 2.6 , st arting fr om the C onfigu ration Overvie w editor . Procedure Follow the s teps bel ow to selec t an M1 Pro cessor Adap ter .
Configuring an M1 CPU with Modsoft 208 870 USE 101 10 V.2 Selecting an M1 Processor Adapter , Continue d Procedu r e, Conti nued Continued on next page Step Action 2 Move the cursor o nto PLC T ype in the pull-down li st and push <Enter>.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 209 Selecting an M1 Processor Adapte r , Continued Next S tep Y ou are now re ady to s pecify th e type of M 1 Mo mentum Pro cessor Ad apter for configura tion.
Configuring an M1 CPU with Modsoft 210 870 USE 101 10 V.2 Specifying an M1 Proce ssor T ype Introduction Once you have se lec ted an M1 Proc esso r Ada pt er in Modsof t 2.6 , you m ust choose b etween t hree types of M1 processors . l A 2.4 K mach in e l A 12.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 211 Specifying an M1 Processor T ype, Continue d Procedure Follow the s teps bel ow to speci fy an M1 Pr oces s o r T y pe. Step Action 1 As a result of selecting an M1 Processor Adapter , you will be presented with a pop-up screen that allows you to select t he machine type.
Configuring an M1 CPU with Modsoft 212 870 USE 101 10 V.2 Default Confi gurat ion Parameters Overv iew This sect ion des cribes th e default config uration pa rameter s. Default s for a 2.4K Ad apter T his sa mple C onfi gurat i on Ov ervie w scree n show s the defau lt c onfig urati on param eters.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 213 Default Configurat ion Parameters, Conti nued Default s for an 18.0 Adap ter This sample Co nfiguration Ove rview s c reen shows t he defa u.
Configuring an M1 CPU with Modsoft 214 870 USE 101 10 V.2 Default Confi gurat ion Parameters, Continued Default V alues Here are the default pa ram ete rs: Parameter 2.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 215 Changing the Range of Discret e and Register References Introduction This s ection provide s guidelines and a pro cedure for chang ing the range of disc rete (0 x and 1 x ) and regi ster (3 x and 4 x ) references .
Configuring an M1 CPU with Modsoft 216 870 USE 101 10 V.2 Changing the Range of Discrete and Register References , Continued Procedu re From the C onfig uration O vervi ew scre en, follow the st eps below to change the range of di screte and regis ter refe rences: Step Action 1 From the Overview menu, select Ran ges .
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 217 Changing the Size of Y our Applicati on Logic Sp ace Introduction The nu mber shown in the Size o f Full Logic Area field in the C onfigu ration Overvie w scree n indi cates the total amoun t of memory availabl e for your applica tion lo gic.
Configuring an M1 CPU with Modsoft 218 870 USE 101 10 V.2 Changing the Number of Segment s Introduction The num ber o f segm e nts sp ecifi ed i n the C o nfi gura tion O ver vi ew s creen determine s the number of I/O Map d rops that you will be able to s et up f or your CPU.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 219 Changing the Number of Segment s, Continued Procedure From the Co nfiguratio n Overvi ew screen, follow the steps be low to c hange the numb er of se gment s: Step Action 1 From the Overview m enu, select I/O .
Configuring an M1 CPU with Modsoft 220 870 USE 101 10 V.2 Changing the Size of the I/ O Map Introduction The defaul t size of the I/O Map a nd you r optio ns vary , depen ding o n whethe r or not your Proce ssor Ad apter supp orts an I/OBu s network.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 221 Changing the Size of the I/O Map, Cont inued Procedure From the Co nfi guratio n Overv iew s creen , follo w the s tep s b elow to chang e the s ize of the I/O Map: Step Action 1 From the Overview m enu, select I/O .
Configuring an M1 CPU with Modsoft 222 870 USE 101 10 V.2 Est ablishing Configurati on Ex tensi on Memory Introduction By d efault , no memo ry space is allo cated for con figurati on exten s ion mem ory .
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 223 Section 8.2 Config uring Op tion Adapter Featu res Overview Purpose This s ection desc ribes ho w to implemen t the battery backup a nd time-of-da y (TO D) clock f eatures of the Momentu m Option Adapte rs.
Configuring an M1 CPU with Modsoft 224 870 USE 101 10 V.2 Reserving and Monitoring a Battery Coil Introduction Sinc e the Optio n Adapter does not have an LED to indica te when the batte ry is low , we reco mme nd that yo u reser ve a 0 x reference to moni tor the health of th e battery .
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 225 Reserving and Monitoring a Battery Coil, Continued Monitoring the Battery Coil Monitor the b attery coil in l adder logic or ti e it to a lamp or alarm that wil l indicate when the ba ttery i s low .
Configuring an M1 CPU with Modsoft 226 870 USE 101 10 V.2 Setting up the Ti me-of -Day Clock Overv iew Each Option Ada pter has a time-o f-day clock. T o use this fe ature, you must reserve a block of eigh t 4 x register s. This sect ion des cribes ho w to rese rve those registers, using M odsoft 2.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 227 Setting up t he Time-of-Day Clock , Conti nued Reserving Registers for the TOD Clock, Continue d Next S tep Sett ing the tim e. Step Action 3 Enter a number (the first in a series o f eight) in the range of available 4 xxxx references.
Configuring an M1 CPU with Modsoft 228 870 USE 101 10 V.2 Setting the T i me Overv iew Once yo u have re served a blo ck of regi sters for the t ime-of- day cloc k, yo u have to set the c orrect t ime.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 229 Setting the T ime, Continued Option 2 G o online and set the register val ues individu ally , usi ng the followin g guidelines an d procedure for se tting th e stat us bits and setting the ti me bi ts.
Configuring an M1 CPU with Modsoft 230 870 USE 101 10 V.2 Setting the T ime, Continued Procedu re Follow the steps in the tab le below to set th e register values for the ti me-of-day cloc k: Step Action 1 Set the correct date and time in registers 4 x + 1 through 4 x + 7.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 231 Reading the Time- of-Day Clock Overvie w This section t ells how to rea d the t ime-of-day clock and us es an ex ample to describe how to interpret the time -of-day cl ock regis ters. Reading th e Clo ck Set the value 40 00H in re gister 4x to read data fr om the clock.
Configuring an M1 CPU with Modsoft 232 870 USE 101 10 V.2 Section 8.3 Modifying Communication Port Parameters Overview Purpose The co mmunication p arameters on the Mo dbus port s are set at the fact ory . This section describes how to access the Port editor and how to e dit the default param eters.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 233 Accessing t he Port Edit or Screen Introduction Modb us p ort p arameters can be m od ifie d usin g th e Port e dit or in Modsoft 2.6. Th is scre en is ac cess ed fr om the Config urat ion Ove rvie w edit o r .
Configuring an M1 CPU with Modsoft 234 870 USE 101 10 V.2 Parameters Whic h Should Not Be Changed Overv iew T wo parame ters on the Port edi tor scree n should not be changed. These are the stop bit a nd head-slot p arameters. Stop Bi t Each port op erates onl y with 1 sto p bit.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 235 Changing the Mode and Dat a Bit s Introduction From th e Port e ditor scre en, each p ort can be confi gured t o operate i n one o f two possibl e modes – R TU or ASCI I. l If the mo de is RTU , the number of data bit s is al ways 8.
Configuring an M1 CPU with Modsoft 236 870 USE 101 10 V.2 Changing the Mode and Dat a Bits, Continued Procedu r e, Conti nued Step Action 2 Use an arrow key to toggle the cursor onto the desired Mode selection in the popup window , then push <Enter> .
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 237 Changing Parity Introduction From th e Port e ditor scre en, a port c an be configure d for even, odd, or no pa rity checking. The factory-set d efault is EVEN pa rity . Procedure T o change t he p arity p arameter , perform the st eps i n the followin g ta ble.
Configuring an M1 CPU with Modsoft 238 870 USE 101 10 V.2 Changing the Baud Rate Overv iew Ea ch port can b e conf igu r ed for a baud in t he ra nge 50 ...1 9,200 . Six tee n vali d bauds are user-sele ct able. The factory-set defau lt is 960 0 baud .
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 239 Changing the Modbus Address Overvie w Each p ort can be assi gned a Mo dbus network a ddres s in the ra nge 1...247. Th at address must be unique with respect to al l other device a ddresses on th e same Modb us netwo rks .
Configuring an M1 CPU with Modsoft 240 870 USE 101 10 V.2 Changing the Delay Overv iew The defaul t value f or the d elay p arame ter is 10 ms. This val ue is appropriat e for most Mo mentum applicatio ns. However , if you us e baud rates lower tha n 4800, y ou should adjus t the d elay timing.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 241 Changing the Protoc ol on Modbus Port 2 Overvie w If you r Momentu m M1 CPU is us ing th e Modbus Port 2 p rovide d by the 1 72 JNN 210 32 O ption Adapter , you can spe cify whether i t will u se the RS232 or RS485 protocol.
Configuring an M1 CPU with Modsoft 242 870 USE 101 10 V.2 Section 8.4 I/O Ma pping the Local I/O Po int s Accessing and Editing t he I/O Map Introduction Eve ry M1 Processor Adapter is assem bled on an I/ O base. The I/O po ints on t he base are t he local I/O for tha t processor .
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 243 Accessing and Editing t he I/O Map, Continued Editing the L ocal I/O Map T o ed it the L ocal I/O Map, perform the steps in the following t able. Continued on next page Step Action 1 T o select the local base unit for drop 1, push <Shift><? > .
Configuring an M1 CPU with Modsoft 244 870 USE 101 10 V.2 Accessing and Editing t he I/O Map, Continued Editing the Local I/O Map Continued on next page Step Action 3 Assign the appropriate state RAM reference(s) to the u nit.
Configuring an M1 CP U with Modsoft 870 USE 101 1 0 V.2 245 Accessing and Editing t he I/O Map, Continued Local I/O Only This screen is al ways used to I/O M ap the loc al I/O ba se on ly . No other I/O bas e unit s can b e I/O M apped on this screen.
Configuring an M1 CPU with Modsoft 246 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 247 I/O Mapping an I/OBus Network with Modsoft At a G l anc e Purpose This chapte r describ es how t o I/O Map an I/O Bus ne twork us ing Mods oft 2.6 . T opics Thi s chapte r conta ins the followin g topics: Note: Modsoft 2.6 does not support the 171 CCC 960 20 Processor Adapter .
I/O Mapping an I/OBus Network with Modsoft 248 870 USE 101 10 V.2 Supporting an I/O Map for an I/OBus Network Introduction The 171 CCS 7 60 00 and 171 CCC 760 10 Processor Adapters have an I/OBus commun icatio n port t hat ena bles them to contro l and communi cate wi th network slave I/O .
I/O Mapping an I/ OBus Network with Modsoft 870 USE 101 1 0 V.2 249 Supporting an I/O Map for an I/OBus Network, Continued Next S tep Once you ar e sure tha t your C onfigurati on Overview p arameters are se t properly , you can access a sec ond I/O M ap scree n for the I/OBus n etwork.
I/O Mapping an I/OBus Network with Modsoft 250 870 USE 101 10 V.2 Accessing an I/O Map Screen for an I/OBus Network Overv iew This sectio n descri bes how to acces s an I/O Map scre en for an I /OBus network. Procedu re T o ac cess the I/O Map screen fo r your I/OBus net w ork, per form the steps in the followi ng t abl e.
I/O Mapping an I/ OBus Network with Modsoft 870 USE 101 1 0 V.2 251 Accessing an I/O Map Screen for an I/OBus Network, Continued Procedure, Continue d Next S tep Edit ing the I/O Bus I /O Ma p. Step Action 2 Select Dro p from the top menu bar of this I /O Map screen.
I/O Mapping an I/OBus Network with Modsoft 252 870 USE 101 10 V.2 Editing the I/OBus I/O Map Overv iew The maxi mum n umber of m odul es whic h can be I/O Mapped on t he I/O Bus network depends on your Processor Adapter: Y ou may u s e up to 16 IOBUS s creens to map you r I/OBus n e twork.
I/O Mapping an I/ OBus Network with Modsoft 870 USE 101 1 0 V.2 253 Editing the I/OBus I/O Map, Continued Procedure, Continue d Continued on next page Step Action 2 Move the cur sor onto the desire d model number a nd push <Enter> . Result: The module type and its description are displayed on the I/O Map s creen.
I/O Mapping an I/OBus Network with Modsoft 254 870 USE 101 10 V.2 Editing the I/OBus I/O Map, Continued Procedu r e, Conti nued Continued on next page Step Action 5 Continue to select and map m odules one after the other . Y ou must enter the modules in contiguous node slots on the screen, e.
I/O Mapping an I/ OBus Network with Modsoft 870 USE 101 1 0 V.2 255 Editing the I/OBus I/O Map, Continued Generic Inter Bus Module Ident ifier Cod es InterBus de vice manuf acturers e mbed an identif ier code in thei r network slav e modules in conforma nce wit h InterBus s tandards.
I/O Mapping an I/OBus Network with Modsoft 256 870 USE 101 10 V.2 Editing the I/OBus I/O Map, Continued Generic InterBus Module I dentifier Codes, Conti nue d Moving Betw een Pages T o move from one I /O Map page to the anothe r , use the <Pag eUp> and <PageDown > keys.
870 USE 101 1 0 V.2 257 Configuring a Modbus Plus Net w ork in M odsoft wit h Pee r Cop At a G l anc e Purpose Commu nicat ion tran sactions over Modbu s Plus are defin ed in Mod s oft 2.
Using Peer Cop with Modsoft 258 870 USE 101 10 V.2 Section 10.1 Getting St arted Overview Purpose This s ection e xplains how to a ccess the Pe er Cop Configura tion Exten s ion scre en and desc ribes the defaul t screen. In This Se ction This sec tion c ontai ns the followi ng topi cs: For This T opic.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 259 Accessing the Peer Cop Configur ation Extensi on Screen Introduction Before y ou ca n access t he Peer Co p Config uration Extensio n screen , you mus t have speci fied enough extens io n memory to suppo rt your Peer Cop dat a bas e.
Using Peer Cop with Modsoft 260 870 USE 101 10 V.2 Accessing th e Peer Cop Configuration Ext ension Screen, Continue d Estimating How Much Memory to Reserv e Follow these gui delines for esti matin g the amo unt of extension memory you will need for your Peer Cop data bas e: For .
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 261 The Default Peer Cop Screen Overvie w This section describes the Peer C op scre en as it appears the first tim e yo u acces s it.
Using Peer Cop with Modsoft 262 870 USE 101 10 V.2 The Default Peer Cop Screen, Continued Next S tep N o values are set anywh ere in the default Peer Cop screen. The f ollowin g two example s show how to se t up Peer Cop to con figure dif ferent ty pes of Modbus Plus networks .
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 263 Section 10.2 Using Modb us Plus to H andle I/O Overview Purpose This secti on uses a n examp le to e xplain ho w to configure a Modbus Plus network for I/O se rvici ng. In t his exam ple, a C PU wil l control four Momentu m I/O mo dules.
Using Peer Cop with Modsoft 264 870 USE 101 10 V.2 Devices on the Network Introduction Thi s sectio n describe s the five devices w hich compri se the s ample netw ork and the strategy u sed to as sign addresse s.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 265 Defining the Link and Accessing a Node Overvie w When you re ach th e de fault Peer Cop s creen , a pop up me n u ask s you to def ine a link and access a node. What Is a Lin k? The link is th e Modbu s Plus net w ork on whic h t he CP U resi des.
Using Peer Cop with Modsoft 266 870 USE 101 10 V.2 Defining the Link and Accessing a Node, Continued Procedu re Follow the ste ps in the table bel ow to define th e link and acc ess a no de, us ing the popup me nu.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 267 Defining the Link and Accessing a Node, Conti nued Procedure, Continue d Next S tep Conf irming the Peer Cop summ ary in formation .
Using Peer Cop with Modsoft 268 870 USE 101 10 V.2 Confirming the Peer Cop Summary Informat ion Overv iew Once yo u hav e defin ed the link and accessed a no de, the Peer C op su mmary informati on values assum e default s etting s. This sec tion d escribes th ose settings and how to conf irm or ch ange them.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 269 Confirming the Peer Cop Summary Information, Con tinued Procedure Fol low the steps in the table below to change the Peer Cop summ ary inform ation. Continued on next page Step Action 1 Push <T ab> to move the cursor to the menu bar at t he top of the Peer Cop screen.
Using Peer Cop with Modsoft 270 870 USE 101 10 V.2 Confirming the Peer Cop Summary Information, Continued Procedu r e, Conti nued Continued on next page Step Actio n 4 Now se lect On E rror from the menu bar .
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 271 Confirming the Peer Cop Summary Information, Con tinued Next S tep Speci fying references for input data .
Using Peer Cop with Modsoft 272 870 USE 101 10 V.2 Specifying Refe rences for Input Data Introduction The Peer Cop screen is now set to ac cess the devi ce at Modbus Pl us address 2, which f or this ex ample is a 170 AD I 340 00 1 6-point in put module.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 273 Specifying References f or Input Dat a, Continued Procedure Fol low the steps in the table below to de fine the specif ic input i n Peer Co p. Continued on next page Step Action 1 Move the cursor to the REFERENCE column of the SPECIFIC INPUT field, using the cursor arrow keys.
Using Peer Cop with Modsoft 274 870 USE 101 10 V.2 Specifying Refe rences for Input Data, Con tinued Procedu r e, Conti nued Continued on next page Step Action 3 T ype the value 1 in the LEN column of the SPECIFIC INPUT f ield, indicating that the device at address 2 will t ransmit 1 word of dat a (or 16 bits).
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 275 Specifying References f or Input Dat a, Continued Procedure, Continue d Next S tep Access ing th e rema ining dev ic es. Step Action 5 In this case, we wil l leave the def ault BIN setting. P ush <E nter> .
Using Peer Cop with Modsoft 276 870 USE 101 10 V.2 Accessing th e Remaining Devices Introduction The I/O mo dules at Mod bus Plus a dd resses 3 ... 5 c an be config ured in divid ually in a manner similar t o that u sed for the 170 ADI 340 00 mo dule a t address 2.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 277 Accessing t he Remaining Devic es, Continued Procedure, Continue d Next S tep Y ou are now rea dy to con figure Pe er Cop for the d evice at M odbus Plus addr ess 3, which for this ex ample is a 170 ADO 34 0 00 16-po int output modul e.
Using Peer Cop with Modsoft 278 870 USE 101 10 V.2 Completing t he I/O Devi ce Configuration in Peer Cop Introduction Usi ng the pr ocedur es desc ribed prev ious ly , you can compl ete the I/O co nfigura tion in Peer C op. Thi s sectio n shows comple ted Pee r Cop sc reens for this ex ample.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 279 Completing the I/O Device Configuration in Peer Cop, Continued Com ple ted Screen: Node 3 The comple ted Peer Cop scr een for nod e 3 should l ook .
Using Peer Cop with Modsoft 280 870 USE 101 10 V.2 Completing t he I/O Devi ce Configuration in Peer Cop, Continued Completed Screen: Node 5 The complet ed Peer Co p screen for node 5 shoul d look like thi s : Not e: The le ngth s (LEN) fo r the 32- bit I/ O device s at add resse s 4 and 5 nee d to be s p ecif ied as 2 wo r ds (32 bits) .
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 281 Section 10.3 Passing Supervisory Dat a o ver Modbus Plus Overview Purpose This Peer Cop exam ple de als wi th a ne twork wh ere thre e CPUs comm unicate over Modbus Plus. Each devic e nee ds it s own Peer Cop config uration .
Using Peer Cop with Modsoft 282 870 USE 101 10 V.2 Devices on the Network Introduction Thi s sectio n descri bes the th ree CPUs which ex change d ata over the s ample Modbus P lus network an d the st rategy us ed to assign n ode addresses.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 283 Configuring a Node to Exchange Dat a Getting St arted T o Peer Co p this sampl e con figurati on, each CPU m ust be se para tely programme d to comm unica te with t he othe rs over Modbus Plus.
Using Peer Cop with Modsoft 284 870 USE 101 10 V.2 Configuri ng a Node to Exchange Dat a, Continued Procedu re Follow the ste ps in the table bel ow to define th e link and acc ess a no de. Continued on next page Step Action 1 With the cursor flashing in the Link value field of the Add Node popup, m ake sure that the Link value in the popup is 1.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 285 Configuring a Node to Exchange Dat a, Continued Procedure, Continue d Next S tep Conf irming the Peer Cop summ ary in formation . Step Action 2 If the value in the Node field is 1, as in our example, press <Enter> .
Using Peer Cop with Modsoft 286 870 USE 101 10 V.2 Confirming the Peer Cop Summary Informat ion Overv iew Once yo u hav e defin ed the link and accessed a no de, the Peer C op su mmary informati on values assum e default s etting s. This sec tion d escribes th ose settings.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 287 Specifying References f or Input and Output Dat a Overvie w We will now set up th e 171 CCS 760 00 Momentu m M1 CPU at Modbus Plus address 2. This device will: l send ei ght 4 x registers of spe cific ou tput to the supervisory com puter at Modbus Plus addre ss 1.
Using Peer Cop with Modsoft 288 870 USE 101 10 V.2 Specifying Refe rences for Input and Output Data, Continued Defining the Specific Outp ut, Conti nued Continued on next page Step Action 3 In the LEN.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 289 Specifying References f or Input and Output Dat a, Continued Defining the Global Input s Now the M 1 n ee ds to be Peer Copp ed to receive fi ve w ord s of global dat a from the super visory PL C at Modbus Plus address 1 .
Using Peer Cop with Modsoft 290 870 USE 101 10 V.2 Specifying Refe rences for Input and Output Data, Continued Defining the Global I nput s, Conti nued Continued on next page Step Action 2 T ype the value 5 in the LEN column of the GLOBAL INPUT field, indicating that the CPU will receive five words of global data from the supervisory computer .
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 291 Specifying References f or Input and Output Dat a, Continued Defining the Global Input s, Continue d Next S tep Defi ning the re ferences for the next node .
Using Peer Cop with Modsoft 292 870 USE 101 10 V.2 Defining the Refe rences for the Next Node Overv iew We n ow wa nt to attach th e M od so ft 2 .6 programming p anel to t he 17 1 C CS 760 00 Momentu.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 293 Defining the References f or the Next Node, Continu ed Defining Sp ecific Output s, Continue d Continued on next page Step Action 2 T ype the v alue 16 in the LE N column of the SPECIFIC OUTPUT fi eld.
Using Peer Cop with Modsoft 294 870 USE 101 10 V.2 Defining the Refe rences for the Next Node, Continue d Defining G lobal Input s Follow the ste ps in the t able bel ow to de fine the gl obal input dat a from th e supervis ory PLC at M odbus Plu s add ress 1.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 295 Defining the References f or the Next Node, Continu ed Defining Globa l Input s, Continue d Continued on next page Step Action 2 T ype the v alue 7 in t he LEN column of the G LOBAL INPUT field to indicate that seven words will be accepted.
Using Peer Cop with Modsoft 296 870 USE 101 10 V.2 Defining the Refe rences for the Next Node, Continue d Defining G lobal Input s, Continued Next S tep D efining re ference s for the s upervis ory comp uter .
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 297 Defining References for the Supervisory Computer Overvie w At this po int, we will att ach the Mods oft 2.6 prog ramming pan el to the A T984 super visory PL C at Modbus Plus address 1 and set u p two Pee r Cop sc reens to handle th e M1 CPUs at addresses 2 an d 3.
Using Peer Cop with Modsoft 298 870 USE 101 10 V.2 Defining References for the Supervisory Computer , C ontinued Specifying References for Node 2 We kn ow that this M1 CPU sen ds eight words of speci fic outpu t to the supervis or and recei ve five wo rds of global da ta f rom the su pervisor .
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 299 Defining References for the Supervisory Computer , Continued Specifying References for Node 2, Continue d Continued on next page Step Action 2 T ype the value 8 in the LEN colum n of the SPECIFIC INPUT field to indicate the number of registers that will be r eceived.
Using Peer Cop with Modsoft 300 870 USE 101 10 V.2 Defining References for the Supervisory Computer , C ontinued Specifying References for Node 2, Conti nued Continued on next page Step Actio n 4 In the REFERENCE column of the GLOBAL OUTPUT field (at the bottom of the screen), type 400033 , the f irst register which will be sent.
Using Peer Cop w ith Modsoft 870 USE 101 1 0 V.2 301 Defining References for the Supervisory Computer , Continued Specifying References for Node 2, Continue d Next S tep Com plete the configu ration by cre ating a Peer C op screen f rom the supervi sor that access es node 3 and d efines the reference s for that n ode.
Using Peer Cop with Modsoft 302 870 USE 101 10 V.2 Completing t he Configurat ion Overv iew T o com plete the c onfigu ration of th e sup ervisory com puter a t Modbus Plus addre ss 1, create a Peer Cop screen th at accesses the CPU at addre s s 3 and define s the references for that CPU.
870 USE 101 1 0 V.2 303 Saving to Flash in Modsoft At a G l anc e Purpose Y ou sa ve data to Flash so that i n the even t of an unexpec ted loss of pow er , the applica tion lo gic a nd sta te RAM values will be preser ved. This sec tion d escribes how to save the app lication logic and st ate RAM valu es to Flash us ing Mods oft 2.
Saving to Flash i n Modsoft 304 870 USE 101 10 V.2 Prep aring to Save t o Flash Before Y ou Save to Flash Before you can sa ve to Flash in Modsoft, y ou need to spe cify how the c ontroller will react w hen pow er i s re-est ablished. T his secti on desc ribes three o ptions.
Saving to Flash in Modsoft 870 USE 101 1 0 V.2 305 Saving to Flash Conditions for Saving to Flas h In order to sa ve the appli cation pro gram and sta te RAM values to Flash: l The Mod soft pa nel mus t be Onli ne l The PLC must be stoppe d (not solving l ogic) Save-to-Flash Procedure Follow the s teps bel ow to save t o Flas h.
Saving to Flash i n Modsoft 306 870 USE 101 10 V.2 Saving to Flash, Conti nued Save-to-Fla sh Procedu r e, Conti nued Step Action 4 T ype Y in response to question 3.
870 USE 101 1 0 V.2 307 Concept At a G l anc e Purpose This part des cribes h ow to confi gure an M 1 CPU, how to I/O map an I/OBus network, how to configure a Modbus Plus network wi th Peer Co p and how to save to Flash using Concep t 2.1. In This Part This p art co ntains the follo wing chapters: For Information On.
.
870 USE 101 1 0 V.2 309 Configuring an M1 CPU with Concept At a G l anc e Purpose This chapter ex plain s how to co nfigure a CPU us ing Concep t 2.2. In This Chapter This chap ter c ontai ns the follo wing secti ons : For This T opic.. . S ee Section.
Configuring an M1 CPU with Concept 310 870 USE 10 1 10 V.2 Section 12.1 Configuring the Processor Adapter Overview Purpose This se ction de scribe s how to co nfigur e a Mom entum M1 Process or Adapter using Concep t 2.2. In This Se ction This sec tion c ontai ns the followi ng topi cs: For This T opic.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 311 Selecting an M1 Processor Adapte r Introduction This section d escribes how to select a n M1 Processor Adapt er for a new proje ct usi n g Conc ept 2.2. F Procedure Follow the s teps bel ow to selec t an M1 Pro cessor Adap ter f or a n ew pr ojec t .
Configuring an M1 CPU with Concept 312 870 USE 10 1 10 V.2 Selecting an M1 Processor Adapter , Continue d Procedu r e, Conti nued Continued on next page Step Action 3 From the Configure menu, select PLC T ype OR double-click on the Ty p e field in the dialog box.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 313 Selecting an M1 Processor Adapte r , Continued Procedure, Continue d Continued on next page Step Action 4 From the PLC Family dropdown menu, select MOMENTUM . Result: The CPU/Executive menu changes to reflect t he choices available for Momentum.
Configuring an M1 CPU with Concept 314 870 USE 10 1 10 V.2 Selecting an M1 Processor Adapter , Continue d Procedu r e, Conti nued Step Action 5 Choose your PLC type from the CPU/Executive menu. Result: The remaining fields are filled with corresponding values.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 315 Default Configurat ion Parameters Overvie w This sect io n de scrib es the def ault confi gur a tio n parame ters . Default s for a 2.4K Machine This sample PLC Confi guratio n screen s hows the d efault c onfigu ration p aramete rs.
Configuring an M1 CPU with Concept 316 870 USE 10 1 10 V.2 Default Confi gurat ion Parameters, Continued Default s for a 12.2K Ma chine This sample PLC Configura tion sc reen sh ows the defau lt confi guratio n pa ramete rs.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 317 Default Configurat ion Parameters, Conti nued Default s for an 18.4K Ma chine This sample PLC Confi guratio n screen s hows the d efault c onfigu ration p aram eters.
Configuring an M1 CPU with Concept 318 870 USE 10 1 10 V.2 Changing the Range of Discrete and Register References Introduction Thi s section prov ides guidelin es and a procedure for chang ing the range of disc rete (0 x and 1 x ) and regi ster (3 x and 4 x ) references .
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 319 Changing the Range of Discret e and Register References, Continued Procedure Fol low the steps below t o change the range of disc rete an d .
Configuring an M1 CPU with Concept 320 870 USE 10 1 10 V.2 Changing the Size of the Full Lo gic Area Introduction The num ber sh own i n the Ava ila bl e Lo gic Ar ea fi eld in the PLC Co nfig urat ion screen in dicates the tot al amount of memo ry available for your applicatio n logic.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 321 Underst anding the Num ber of Segment s Only the Firs t Segment is Solved The numb er of segment s specified in the Con figuration Over view screen determine s the num ber of I/O Map d rops th at you will be ab le to s et up for y our CPU.
Configuring an M1 CPU with Concept 322 870 USE 10 1 10 V.2 Changing the Size of the I/ O Map Introduction The default s ize of th e I/O Map is 144 wo rds. Y ou ma y want to adjust this number to provide m ore suppo rt for an I/OBus ne twork or to increas e the size of t he full logic area.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 323 Changing the Size of the I/O Map, Cont inued Procedure From the PLC Configu ration screen, fo llow the steps below to change the siz e of the I/O M ap: Step Action 1 From the Configure m enu, select I/O Map .
Configuring an M1 CPU with Concept 324 870 USE 10 1 10 V.2 Est ablishing Configurati on Ex tensi on Memory for Peer Cop Introduction By def au lt, the P e er Co p capab ilit y is d isabl ed.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 325 Est ablishing Configuration Extension Memory for Peer Cop, Continued Procedure From the PLC C onfiguration screen, follow the steps below to.
Configuring an M1 CPU with Concept 326 870 USE 10 1 10 V.2 Est ablishing Configurati on Ex tensi on Memory for Peer Cop, Continued Procedu r e, Conti nued Step Action 3 From the Configure menu, select Peer Cop . Result: The Peer C op dialog box appears.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 327 Section 12.2 Config uring Op tion Adapter Featu res Overview Purpose This s ection desc ribes ho w to implemen t the battery backup a nd time-of-da y (TO D) clock f eatures of the Momentu m Option Adapte rs usi ng Conc ept 2.
Configuring an M1 CPU with Concept 328 870 USE 10 1 10 V.2 Reserving and Monitoring a Battery Coil Introduction Sinc e the Optio n Adapter does not have an LED to indica te when the batte ry is low , we reco mme nd that yo u reser ve a 0 x reference to moni tor the health of th e battery .
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 329 Reserving and Monitoring a Battery Coil, Continued Reserving a Battery Coil, Continue d Continued on next page Step Action 2 Cl ic k the check box next to Battery Coil. 3 T ype a number from the range of a vailable 0 xxxx references in the box marked O x .
Configuring an M1 CPU with Concept 330 870 USE 10 1 10 V.2 Reserving and Monitoring a Battery Coil, Continued Monitoring the Battery Coil Monitor the b attery c oil in l adder logic or tie it to a lamp or ala rm that will in dicate when the ba ttery is l ow .
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 331 Setting up t he Time-of-Day Clock Overvie w Each Opti on Adapter has a time-of-day cl ock. T o use this feature, y ou must rese rve a blo ck of ei ght 4 x registe rs. This sec tion des cribes ho w to res erve thos e registers , using Concept 2.
Configuring an M1 CPU with Concept 332 870 USE 10 1 10 V.2 Setting up the Ti me-of -Day Clock, Continued Reserving Registers for the TO D Clock, Conti nued Continued on next page Step Action 2 C lick the check box next to T ime Of Day .
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 333 Setting up t he Time-of-Day Clock, Continued Next S tep Sett ing the tim e. Note: Y ou can use Co ncept’ s Setting the T ime feature o r use the following procedure to set the time.
Configuring an M1 CPU with Concept 334 870 USE 10 1 10 V.2 Setting the T i me Overv iew Once yo u have re served a blo ck of regi sters for the t ime-of- day cloc k, yo u have to set the c orrect t ime.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 335 Reading the Time- of-Day Clock Overvie w This sect io n us es an ex ampl e to desc r ibe ho w to i nter pret the ti me-o f-da y clo ck regi ster s. Example If y ou reserved registers 400100..
Configuring an M1 CPU with Concept 336 870 USE 10 1 10 V.2 Section 12.3 Modifying Modbus Port Parameters Overview Purpose The co mmunication p arameters on the Mo dbus port s are set at the fact ory . This section describes how to acce ss the Modbus Port Setti ngs dial og box and edit the defaul t par ameters.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 337 Accessing the Modbus Port Settings Dialog Box Introduction Modb us port par ameters c an be modified using the Modb us Port S ettings dialog box in Conc ept 2.2. How to Get There From the Co nfigure me nu, select M odbus port settings.
Configuring an M1 CPU with Concept 338 870 USE 10 1 10 V.2 Changing the Baud Rate Overv iew Each port can be co nfigured fo r a bau d in the ran ge 50 ... 1 9,200. Sixteen v alid baud rates are user-s elec table. The factory-set d efault is 9600 b aud.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 339 Changing Mode an d Dat a Bit s Introduction From the Mod bus Port Set tings dialog bo x, e ach port c an b e con fig ured to operate in one of two possible modes – R TU or ASCII. l If the mo de is RTU , the number of data bit s is al ways 8.
Configuring an M1 CPU with Concept 340 870 USE 10 1 10 V.2 S top Bit Should Not Be Changed Changing Parity Introduction From the Modb us Port Settin g screen, a port can be con figured for e ven, odd, or no parity checki ng. The fac tory-s et default is EVEN pa rity .
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 341 Changing the Delay Overvie w The Del ay parameter is set to 10 ms and should be left at this v alue for m ost applica tions. Do not c hange this p arame ter unle ss your applicati on demands it.
Configuring an M1 CPU with Concept 342 870 USE 10 1 10 V.2 Changing the Modbus Address Overv iew Each port c an be as signe d a Mo dbus netw ork a ddress in the ra nge 1 .. . 247. That address mus t be u nique w ith respec t to all o ther dev ice addr esses on the sam e Modbu s netwo rks.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 343 Changing the Protocol on Modbus Port 2 Overvie w If you r Mome ntum M1 CPU is using th e Modb us Port 2 p rovide d by th e 172 JNN 210 32 O ption Adapt er , you c an specify wheth er it wil l use the RS232 or RS485 pro tocol.
Configuring an M1 CPU with Concept 344 870 USE 10 1 10 V.2 Section 12.4 Configuring Ethernet Address Parameters and I/O Scanning Overview Purpose This s ection d escribes how to configure the Ethernet por t using Con c ept 2.2, includin g IP add ress, other addre ss pa rameters and I/O scan ning.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 345 Accessing the Ethernet / I/ O Scanner Screen Introduction Etherne t address and I/O scanni ng para meters c an be modified using the Ethernet / I/O Scan ner dialog box in Concept 2.2 . How to Get There From the Co nfigure me nu, select Et hernet / I/O Scanner .
Configuring an M1 CPU with Concept 346 870 USE 10 1 10 V.2 Accessing the Ethernet / I/ O Scanner Screen, Continued Ethernet Port Default Settin gs If you have not previous ly modifi ed any port p aramet ers, the fo llowing dialog b ox will ap pear . The d ialog box shows th e default para meters for the Ethernet port.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 347 Ethernet Confi guration Opti ons Overvie w The Et hernet / I/O Scanner s creen of fers three option s for c onfigu ring the Etherne t port o.
Configuring an M1 CPU with Concept 348 870 USE 10 1 10 V.2 Setting Ethernet Address Parameters Overv iew If you choos e to spec ify the IP address, you sh ould co mplete all three text boxe s in the u.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 349 Setting Ether net Address Parameters , Continued Subnet Mask Consult your syste m adm inis trator to obt ain th e app ropriate sub net m ask. T ype i t in the Subnet Mask text box , as shown : 255.
Configuring an M1 CPU with Concept 350 870 USE 10 1 10 V.2 Configuri ng I/O Overv iew Onc e th e Ethe r net p ort ad dres s para meter s have bee n set, you m ay as si gn param eters for I/O s canning.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 351 Configuring I/O, Continued IP Address T ype the IP addre ss of the slave modu le in the IP address colum n.
Configuring an M1 CPU with Concept 352 870 USE 10 1 10 V.2 Configuri ng I/O, Contin ued Read Use the rea d function to read dat a from the slave to the master . The Read Ref Slave col umn spe cifies th e first address to be read. The Read Count col umn specifie s the number of registe rs to re ad.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 353 Configuring I/O, Continued Read and Write Y ou ma y includ e read and write commands on the sa me line, as shown: Description Y ou can type a brief descript ion (up to 32 cha racters) of the transaction in the Descripti on colum n.
Configuring an M1 CPU with Concept 354 870 USE 10 1 10 V.2 Completing the I/O Configur ation Introduction Thi s sectio n describes ho w to com plete yo ur Ethernet I/O config uratio n using th e Copy , Cut, Paste, D elet e, Sort and F ill Down buttons.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 355 Completing the I/O Configuration, Continued Cut and Pas te T o move a row within the confi guration list, fo llow the direc tions for c opyi ng, only use the Cu t button instead of the Co py button.
Configuring an M1 CPU with Concept 356 870 USE 10 1 10 V.2 Completing t he I/O Conf iguration, Continue d Fill Down T o c opy p art of any row to the next row or to a seri es of adjoini ng rows , use .
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 357 Section 12.5 I/O M appin g the Loc al I/O Points Accessing and Editing t he I/O Map Introduction Ever y M1 Proc essor Adapter is asse mbled on an I/O base. The I/O points on the base are the local I/O fo r that proce s sor .
Configuring an M1 CPU with Concept 358 870 USE 10 1 10 V.2 Accessing and Editing t he I/O Map, Continued Editing the Local I/O Map From the I/ O Map di alog box, perform th e steps in th e foll owing t able to edit the local I/O Map: Continued on next page Step Action 1 Click the Edit.
Configuring an M1 CP U with Concept 870 USE 101 1 0 V.2 359 Accessing and Editing t he I/O Map, Continued Editing the L ocal I/O Map, Continue d Local I/O Only This screen is al ways used to I/O M ap the loc al I/O ba se on ly . No other I/O bas e units can b e I/O Mappe d on this first scre en.
Configuring an M1 CPU with Concept 360 870 USE 10 1 10 V.2.
870 USE 101 1 0 V.2 361 I/O Mapping an I/OBus Network with Concept At a G l anc e Purpose This chapte r describ es how t o I/O Map an I/O Bus ne twork us ing Con cept 2.2. T opics Thi s chapte r conta ins the followin g topics: For This T opic.. . See Page.
I/O Mapping an I/OBus Network with Concept 362 870 USE 101 10 V.2 Supporting an I/O Map for an I/OBus Network Introduction Thre e Proce ssor Adapt ers have an I/O Bus co mmun ication p ort that enable.
I/O Mapping an I/OBus Network with Conc ept 870 USE 101 1 0 V.2 363 Accessing an I/O Map Screen for an I/OBus Network Overvie w This sec tion d escribes how to access an I/O M ap screen for an I /OBus net work usi n g Conc ept 2.2. Procedure T o access th e I/O Map screen fo r your I/OBus network , perform the step s in the followi ng t ab le.
I/O Mapping an I/OBus Network with Concept 364 870 USE 101 10 V.2 Accessing an I/O Map Screen for an I/OBus Network, Continued Procedu r e, Conti nued Next S tep Edit ing the I/OBus I/ O map. Step Action 3 Click the Edit ... button on the I/ OBus line of the I/ O Map dialog.
I/O Mapping an I/OBus Network with Conc ept 870 USE 101 1 0 V.2 365 Editing the I/OBus I/O Map Overvie w The m aximum number of modul es whic h can be I/O Mapped on the I/OBus network depends on your .
I/O Mapping an I/OBus Network with Concept 366 870 USE 101 10 V.2 Editing the I/OBus I/O Map, Continued Procedu r e, Conti nued Generic InterBus Module I dentifier Codes InterBus de vice manufact urers embed an iden tifier code in th eir netwo rk slave modules in conforma nce wit h InterBu s stan dards.
I/O Mapping an I/OBus Network with Conc ept 870 USE 101 1 0 V.2 367 Editing the I/OBus I/O Map, Continued Generic Inter Bus Module Ident ifier Cod es, Contin ued Identifier Code I/O T ype IOBUS-0301 T.
I/O Mapping an I/OBus Network with Concept 368 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 369 Configuring a Modbus Plus Network in Concept with Peer Cop At a G l anc e Purpose Commu nicat ion tran sactions over Modbu s Plus are defin ed in Co ncept 2.
Configuring a Modbus Plus Network in Concept with Peer C op 370 870 USE 101 10 V.2 Section 14.1 Getting St arted Overview Purpose This s ection e xplains how to a ccess the Pe er Cop Configura tion Exten s ion scre en and desc ribes the defaul t screen.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 371 Accessing the Peer Cop Dialog Box Introduction This secti on descri bes ho w to ac cess the Peer C op dialog box i n Conc ept 2.1. Accessin g the Screen Follo w the s tep s belo w to ac cess the Peer Co p from th e PLC Con figurat ion Scre en.
Configuring a Modbus Plus Network in Concept with Peer C op 372 870 USE 101 10 V.2 Accessing the Peer Cop Dialog Box, Continued Acces sing the Screen , Conti nued Step Action 3 Click the check box next to Peer Cop, then click OK. Result: Peer Cop st atus changes from Disabled to Enabled in the PLC Configuration screen.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 373 Adjusting the Amount of Extension Memory Introduction The de fault amount of mem ory allo tted for Configur ation Exten sion is 100 word s. This am ount may be adj usted withi n the Pe er Cop d ialog box .
Configuring a Modbus Plus Network in Concept with Peer C op 374 870 USE 101 10 V.2 Other Default Set ti ngs in the Peer Cop Dialog Box Overv iew This sectio n descri bes the de fault settings f or Health T imeout and Last V a lue.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 375 Other Default Settings in the Peer Cop Dialog Box, Continued Last V alue The defau lt L ast V a lue sett ing is Clear on timeout .
Configuring a Modbus Plus Network in Concept with Peer C op 376 870 USE 101 10 V.2 Section 14.2 Using Modbus Plus to Handle I/O Overview Purpose This s ectio n uses a n exampl e to ex plain ho w to configure a Modbus Plus network for I/O se rvicing. In this example, a CP U will c ontrol four Mo mentum I/ O mo dules.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 377 Devices on the Network Introduction This s ection de scribes the five dev ices whic h compri se the sampl e network and the strate gy used t o assign addres ses.
Configuring a Modbus Plus Network in Concept with Peer C op 378 870 USE 101 10 V.2 Changing the Peer Cop Summary In formation Overv iew For our examp le, we wi ll change the de fault He alth T imeout set ting to 240 ms a nd the def ault Last V alue setti ng to Hold on timeout .
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 379 Changing the Peer Cop Summary Information, Conti nued Procedure, Continue d Next S tep Speci fying references for input data .
Configuring a Modbus Plus Network in Concept with Peer C op 380 870 USE 101 10 V.2 Specifying Refe rences for Input Data Introduction Thi s sectio n describ es how to sp ecify the r eferences for input da ta. In this examp le, you wil l sta rt by accessin g the device at Modbus Plus address 2, whic h is a 17 0 ADI 340 0 0 16-point input mo dule.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 381 Specifying References f or Input Dat a, Continued Procedure Fol low the steps in the table below to de fine the specif ic input, sta rting fr om the Peer Cop dialog box.
Configuring a Modbus Plus Network in Concept with Peer C op 382 870 USE 101 10 V.2 Specifying Refe rences for Input Data, Con tinued Procedu r e, Conti nued Continued on next page Step Action 2 Sinc e you are addres sing the device at address 2, you will use the line for Source 2.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 383 Specifying References f or Input Dat a, Continued Procedure, Continue d Next S tep Speci fying output refere nces. Step Action 4 Repeat steps 2 and 3 for the de vice at address 4, using the settings in the figure below .
Configuring a Modbus Plus Network in Concept with Peer C op 384 870 USE 101 10 V.2 Specifying Refe rences for Output Data Introduction Thi s sectio n descri bes how to specify the refe rences fo r output dat a.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 385 Specifying References f or Output Dat a, Continued Procedure, Continue d Continued on next page Step Action 2 Since you are addres sing the device at address 3, you will use the line for Source 3.
Configuring a Modbus Plus Network in Concept with Peer C op 386 870 USE 101 10 V.2 Specifying Refe rences for Output Data, Contin ued Procedu r e, Conti nued Step Action 4 R epeat steps 2 and 3 for t he device at address 5, using the settings in the figure below .
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 387 Section 14.3 Passing Supervisory Dat a o ver Modbus Plus Overview Purpose This Peer Cop exam ple de als wi th a ne twork wh ere thre e CPUs comm unicate over Modbus Plus.
Configuring a Modbus Plus Network in Concept with Peer C op 388 870 USE 101 10 V.2 Devices on the Network Introduction Thi s sectio n descri bes the th ree CPUs which ex change d ata over the s ample Modbus P lus network an d the st rategy us ed to assign n ode addresses.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 389 Specifying References f or Input and Output Dat a Overvie w We will now set up th e 171 CCS 760 00 Momentu m M1 CPU at Modbus Plus address 2 to: l send ei ght 4 x registers of spec ific output to the supervi s ory com puter at Modbus Plus addre ss 1.
Configuring a Modbus Plus Network in Concept with Peer C op 390 870 USE 101 10 V.2 Specifying Refe rences for Input and Output Data, Continued Defining the Specific Outp ut, Conti nued Continued on next page Step Action 2 Since y ou are addressing the device at address 1, you will use the line for Source 1.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 391 Specifying References f or Input and Output Dat a, Continued Defining the Global Input s Now the M 1 n ee ds to be Peer Copp ed to receive fi ve w ord s of global dat a from the super visory PL C at Modbus Plus address 1 .
Configuring a Modbus Plus Network in Concept with Peer C op 392 870 USE 101 10 V.2 Specifying Refe rences for Input and Output Data, Continued Defining the Global I nput s, Conti nued Next S tep D efining th e refere nces for t he next node.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 393 Defining the References f or the Next Node Overvie w We now w ant to att ach the Co ncept 2.
Configuring a Modbus Plus Network in Concept with Peer C op 394 870 USE 101 10 V.2 Defining the Refe rences for the Next Node, Continue d Defining Spe cific Output s Follow the step s in the tab le below to defin e the specific outp ut in Peer Cop. Continued on next page Step Action 1 Click on the Specific Output.
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 395 Defining the References f or the Next Node, Continu ed Defining Globa l Input s Follow the ste ps in the t able bel ow to defin e the global inp ut data from the super visory PL C at Modbus Plus address 1 .
Configuring a Modbus Plus Network in Concept with Peer C op 396 870 USE 101 10 V.2 Defining References for the Supervisory PLC Overv iew At t his p oint , we w i ll at tach th e Con cept 2 .
Configuring a Modbus Plus Network in Concept with Peer Cop 870 USE 101 1 0 V.2 397 Defining References for the Supervisory PLC, Conti nued Defining the Glob al Ou tputs This superv isory C PU send s out 1 0 words of global output, parts of whic h are received by ea ch of the M1 CPUs.
Configuring a Modbus Plus Network in Concept with Peer C op 398 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 399 Saving to Flash with Concept Saving to Flash Overvie w Y ou sa ve to F lash so that, in the even t of an unexpect ed loss of pow er , the applica tion lo gic a nd sta te RAM values will be preser ved. This secti on describes how to save the appl icatio n logic and st ate RAM values to Flas h using Co ncept 2.
Saving to Flash with Concept 400 870 USE 101 10 V.2 Saving to Flash, Conti nued Procedu re Follow the steps in the tab le below to save to Flash: Continued on next page Step Action 1 From the Online menu on the main m enu bar , select C onnect . Result: The Connect to PLC d ialog box appears.
Saving to Flash with Conc ept 870 USE 101 1 0 V.2 401 Saving to Flash, Cont inued Procedure, Continue d Continued on next page Step Action 4 From the Online menu on the main menu bar , select Online control panel. Result: The Online Control Panel appears.
Saving to Flash with Concept 402 870 USE 101 10 V.2 Saving to Flash, Conti nued Procedu r e, Conti nued Step Action 6 Select the appropriate p arameters in the di alog box and click the Save to Flash button. Result: A dialog box wil l appear asking if you really want to save to Fl as h.
870 USE 101 1 0 V.2 403 Appendices At a G l anc e Purpose This part provides suppl ement al information o n Ladder Logi c eleme nts and instructi ons and LED fl ash pa tterns and erro r codes. In This Part This p art co ntains the follo wing chapters: For Information On .
.
870 USE 101 1 0 V.2 405 Ladder Logic Elem ent s and Instructions At a G l anc e Overvie w The exec utive firmware for the Mome ntum M1 Processor Adapters support s the ladder lo gic programmin g lang uage for co ntrol applicati ons.
Ladder Logic Elements and Instructions 406 870 USE 101 10 V.2 S t andard Ladder Logic Element s Introduction Thi s sectio n provides a gl ossary of st andard ladder lo gic symbols and instru ctions. Ladder Log ic Symbols The table below prov ides the m eanin g of st andard ladde r logic s ymbols.
Ladder Logic Elem ents and Instructions 870 USE 101 1 0 V.2 407 St andard Ladder Logic Element s, Continued St andard Ladder Logic Instructions The t able be low provides s tanda rd ladder logic instructions an d their meani ng.
Ladder Logic Elements and Instructions 408 870 USE 101 10 V.2 S t andard Ladder Logic Element s, Continued St anda rd Ladd er Logic Instructions , Conti nued Continued on next page Symbol Meaning Node.
Ladder Logic Elem ents and Instructions 870 USE 101 1 0 V.2 409 St andard Ladder Logic Element s, Continued St andard Ladder Logic Instructions, Continue d Symbol Meaning Nodes Consumed Other Special .
Ladder Logic Elements and Instructions 410 870 USE 101 10 V.2 DX Loadable Support Introduction The M1 CPU s can us e DX loadable instru ctions, w hich s upport optional s oftware product s that can be p urchased for spe cial applicat ions. DX loadab les p rovide the user wi th specia l ladd er logic functions.
Ladder Logic Elem ents and Instructions 870 USE 101 1 0 V.2 411 A Special ST A T Instruction Overvie w A specia l version of the ST A T instructi on has been dev eloped to support Mome ntum M1 C PUs . The ST A T instruct ion acces ses a speci fied nu mb er of wo rds in a st atus tab le in the C PU’ s system memo ry .
Ladder Logic Elements and Instructions 412 870 USE 101 10 V.2 A Special ST A T Instruction, Conti nued T op Node Content The r efer ence nu mbe r ente red in the top node is the fir st pos iti on in th e des tinat ion block–i .e., the bloc k where the c urrent words of i nterest from the st atus tab le will be copied.
Ladder Logic Elem ents and Instructions 870 USE 101 1 0 V.2 413 A Special ST A T Instruction, Cont inued Word s 1...12 The first 12 words describe the CPU statu s and are detailed in the following t able: Continued on next page Word Descri ption 1 Displays the following aspects of the PLC’s status: 2 Reserved for internal use.
Ladder Logic Elements and Instructions 414 870 USE 101 10 V.2 A Special ST A T Instruction, Conti nued Wo rds 1.. .12, Conti nued Continued on next page Word Description 5 Displays the PLC’s stop st.
Ladder Logic Elem ents and Instructions 870 USE 101 1 0 V.2 415 A Special ST A T Instruction, Cont inued Word s 1...12 , Continue d Continued on next page Word Descripti on 7 Displays the address of the end-of-logic (E OL) pointer: 8 and 9 Not used. 10 Uses its two least significant bits to display RUN/LOAD/DE BUG status: 11 Not used.
Ladder Logic Elements and Instructions 416 870 USE 101 10 V.2 A Special ST A T Instruction, Conti nued Words 13...20 W ords 13 ...20 are availab le only f or the 171 CCS 760 00 and 171 CCS 760 10 Momentu m M1 Pr ocessor Adapters to indicate the st atus of I/OBus m odules controlle d over the I/O Bus network.
870 USE 101 1 0 V.2 417 Run LED Flash Patterns and Erro r Codes Run L7ED Flash Pattern and Error Cod es The follo wing t able lis ts the flash pattern of the Run LED on the Mom entum Processor Adapters. It also lists the a ssociated c odes (in hex format).
Run LED Flash Patterns and Error Codes 418 870 USE 101 10 V.2 Run LED Flash Pattern and Error Codes, Contin ued Continued on next page Number of Blinks Code (hex) Error 4 0607 m odbus cmd- buffer over.
Run LED Flash Patterns and Error Codes 870 USE 101 1 0 V.2 419 Run LED Flash Pattern and Error Cod es , Contin ued Number of Blinks Code (hex) Error 7 0300 E XEC not loaded 0301 E XEC Checks um 8 8001.
Run LED Flash Patterns and Error Codes 420 870 USE 101 10 V.2.
870 USE 101 1 0 V.2 421 Num eri cs 171 CCC 760 10 Processor Adapter diag ra m, 38 key featu res, 38 LEDs, 39 sp ec ifi catio ns, 39 171 CCC 780 10 Processor Adapter changing protocol to RS4 85, 241 di.
Index 422 870 USE 101 10 V.2 95 Pro cesso r Adap ter, Opti on Ad apter and I/O base , 98 C communi cation ports config uring wi th Conc ept, 336 co nf igu ring with Mo dsof t, 232 delay para meter , 2.
Index 870 USE 101 1 0 V.2 423 purpo se, 66 reservi ng and monitori ng a battery coil in Conc ept , 32 8 reservi ng and monitori ng a battery coil i n Modsof t, 224 communi catio n ports, 66 config uri.
Index 424 870 USE 101 10 V.2.
Modicon, Square D and T elemecanique are PLC brand names from Schneider. These products are s old in the US by Square D; in Canada, Latin America, Europe, Africa, Asia/Pacific and Middle East by Schne.
デバイスSchneider Electric Processor Adapterの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Schneider Electric Processor Adapterをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSchneider Electric Processor Adapterの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Schneider Electric Processor Adapterの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Schneider Electric Processor Adapterで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Schneider Electric Processor Adapterを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSchneider Electric Processor Adapterの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Schneider Electric Processor Adapterに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSchneider Electric Processor Adapterデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
