Searsメーカー502.25502の使用説明書/サービス説明書
ページ先へ移動 of 32
CAUTION: Read And Follow All Safety Rules And Instructions Before Operating This Equipment. ® 10 30" 5 REAR HP° ELECTRIC START MOWER / MULCHE ENGU E IDER o Assembly • Operation • Customer Responsibilities = Maintenance • Service and Adjustment = Repair Parts F-92533 11-22-91 Sears, Roebuck and Co,, Chicago, tL.
SAFETY RULES Safe Operation Practices for Riding Vehicles As Recommended by American National Standards Institute This cutting machine is capable of amputating hands and feet and throwing objects.
SAFETY RULES - continued CHILDREN: Tragic accidents can occur if the operator is not alert to the presence of chiJdren_ Children are often attracted to the machine and the mowing activity NEVER assume.
Congratulations on your purchase of a Sears Rider It has been designed, engineered and manufactured to give you the best possible dependability and performance If you experience any problems you canno.
TABLE OF CONTENTS SAFETY RULES .................................................... 2-3 CUSTOMER RESPONSIBILITIES .......................... 4 PRODUCT SPECIFICATIONS ................................ 4 WARRANTY .........................................
ACCESSORIES AND ATTACHMENTS These accessories arrd attachments were available when the u nit was purchased. They are also available at most Sears retail outlets, catalog arrd service centers.
ASSEMBLY PREPARATION Before being put in the carton, the u nit was carefully inspected The carton was made to protect the unit dudng shipment The unit !s completely assembled except for the items show.
ASS E M B LY HOW TO PREPARE AND CHARGE THE BATTERY NOTE: Before you install the battery, add the battery acid (Electrolyte) and charge the battery Battery acid will damage paint and parts, WARNING: Read the instructions included with the battery acid container.
,,,u i ASSEMBLY HOW TO ASSEMBLE THE STEERING WHEEL Use the fasteners shown below to install the steering wheel The fasteners are shown at full slze A 1x102 Bottom View © B Top 15x88 View 1 Make sure .
ASSEMBLY HOW TO INSTALL THE BAI-rERY Use the fasteners shown below to install the battery, The fasteners are shown full size A 91565 B Q C 15x66 D lx38 Battery Tray Drain Tube Drain Tube Clamp A 1 Che.
ASSEMBLY HOW TO INSTALL THE SEAT Use the fasteners shown below to instalt the seat The fasteners are shown at full size (A) (B) lx45 18xlB (C} BoIlom (D) Top 2x53 View tSx88 V_ew Seat Seal Bfackel C D 1 With the seat hinge towards the front of the unit.
OPERATION KNOW THE PRODUCT Before you operate the unit, read this instruction book If you understand the unit and how the unit operates you will get the best performance When you read this instruction.
OPERATION The operation of any lawn mower can result in foreign objects thrown in the eyes, which can result in severe eye damage Always wear safety glasses or eye shields before starting your lawn mo.
OPERATION HOW TO USE THE THROTTLE CONTROL Use the throttle control to increase or decrease the speed of the engine 1 To start a cold engine move the lever to the START or CHOKE position 2 The FAST pos.
OPERATION BEFORE STARTING THE ENGINE CHECK OIL - Add as needed NOTE: Do not check the level of the oil while the engine runs 1 Make sure the unit is tevel 2 Clean the area around the dipstick Remove t.
OPERATION HOW TO OPERATE THE UNIT AS A MULCHER A Mutcher cuts the grass fine so that the grass can be easily recycled Because the nutrients are returned to the soil, the lawn will need less fertilizer'.
OPERATION HOW TO CONVERT THE MOWER HOUSING The mower housing has a speclat plate that lets you mulch the lawn for a clean, fine cut The mulcher plate must be removed to convert the mower housing to fr.
CUSTOMER RESPONS BIUTIES MAUNTENANCE CHART R I R G I PROCEDURE Blade, Inspect & Sharpen Blade Engagement Control, Check Brake, Check Clutch, Check Tires, Check Batter/, Check & Charge MAINTENA.
MAINTENANCE iNSPECT BLADE WARN!NG: Before you inspect or remove the ...... d_sc_nn_, t .... _._ ,o .... _.., plug the b!adeh .... nobj_ct, stop the engine Che&k the un.t for damage The blade has sharp edges When you ho!d the blade, use g!oL, es or cloth ,t t_r _ ,4e material to protect _o,,.
MAINTENANCE HOW TO CHECK AND ADJUST THE BLADE ENGAGEMENT CONTROL WARNING: To prevent an injury, the blade engagement control must operate correctly 1 Stop the engine Disconnect the wire from the spark plug.
MAINTENANCE Adjustable Nut / (To increase the operation of the Washer _._ brake, turn counterclockwise ) Cotter Pin Brake Rod / 1/2" to 5/8 (13ram to 16turn) Clearance Pedal Lever /" / Washe.
MAINTENANCE HOW TO REMOVE THE SIDE PANEL To help service and clean the engine or the battery the rear s_de panels can be easity removed 1 Remove the large screws that hold the front of the side panel .
MAINTENANCE ENGINE HOW TO CHECK THE OIL NOTE: Do not check the level of the oil while the engine runs, 1 Make sure the unit is level 2 Clean the area around the dipstick Remove the dipstick Wipe the o.
MAINTENANCE HOW TO CLEAN THE AIR FILTERS Some engines have two filters, an outer foaro filter around an inner paper filter Clean the air filters every 50 hours If you operate in dirty conditions servi.
SERVnCE AND ADJUSTMENT HOW TO ADJUST THE CARBURETOR The factory settings for the carburetor are for most conditions if the engine is operated under the following conditions you can adjust the carburet.
r SERVICE AND ADJUSTMENT 2 HOW TO REMOVE THE MOWER HOUSING 1 Move _he lift lever to the MIDDLE position 2 Move the blade engagement control lever [o the DISENGAGE position 3 Disconnect the blade drive.
SERVICE AND ADJUSTMENT HOW TO REPLACE THE MOWER DRIVE BELT 1 Move the lift lever into the low cut position 2 Slide the mower drive belt between the stack pulley and the belt guide Remove the mower dri.
SERVICE AND ADJUSTMENT HOW TO LEVEL THE MOWER HOUSING if the mower housing is level, the mower will cut easier and the iawn will look better 1 Make sure the unit is on a hard level surface 2 Check [he.
SERVICE AND ADJUSTMENT HOW TO SET THE HEIGHT OF CUT The height of cut is sat at the factory from 1'/_ to 4inches To lower or raise the height of cut make an adjustment to the lifter rod as follow.
STORAGE (Over 30 Days) At the end of each year, prepare the unit for storage as foilo',,_s MOWER CLEAN THE UNIT t Clean the mower housing See "How To Clean The Mower Housing" LUBRICATE .
TROUBLE SHOOTING CHART (Recoii-Sta_ And Electric Models) PROBLEM: The engine will not start 1 Follow the steps How To Start The Engine in this book 2 Clean the battery terminals Tighten the cables 3 C.
Medea No, 502.255020 How to Order Repair Parts ® 10 30" MOWER / 5 SPEED REAR ENGINE HPo ELECTRIC START MULCHER The Model Number for the mower is found under the seat on a decal attached to the seat support.
デバイスSears 502.25502の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sears 502.25502をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSears 502.25502の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sears 502.25502の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sears 502.25502で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sears 502.25502を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSears 502.25502の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sears 502.25502に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSears 502.25502デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
