SearsメーカーNTEX04911.0の使用説明書/サービス説明書
ページ先へ移動 of 28
Serial Number Decal CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Keep this manual for future reference. Model No.
2 T ABLE OF CONTENTS W ARNING DECAL PLACEMENT W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . .
3 W ARNING: T o reduce the risk of serious injury , read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product.
4 Seat Accessory T ray Seat Handlebar Handlebar Heart Rate Monitor Pedal/Strap Wheel Leveling Foot Console Backrest Adjustment Handle Handle Thank you for selecting the revolutionary NORDICTRACK ® GX 5.
5 M8 Locknut (86)–2 M6 W asher (88)–8 M4 x 16mm Screw (77)–7 M8 x 16mm Screw (69)–8 M8 x 65mm Button Bolt (70)–2 M6 x 38mm Screw (25)–8 M6 x 18mm Screw (75)–2 M10 x 105mm Bolt (65)–4 M.
6 • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you fi nish assembly .
7 3 3. Orient the Seat Frame (52) as shown. Attach the Seat Frame (52) to the Seat Carriage (41) with four M8 x 16mm Screws (69). 52 69 41 4. Tip: A void damaging the wires inside the Seat Handlebar (1 1) during this step. Attach the Seat Handlebar (1 1) to the Seat Frame (52) with two M8 x 65mm Button Bolts (70) and two M8 Locknuts (86).
8 5 5. Plug the Seat Pulse Wire (10) into the receptacle in the Right Rear Shield (97). 97 10 6. Attach the Seat (9) to the Seat Frame (52) with four M6 x 38mm Screws (25) and four M6 Washers (88).
9 8 7 103 75 7. Attach the Backrest (8) to the Seat Frame (52) with four M6 x 38mm Screws (25) and four M6 W ashers (88). 8. Attach the Backrest Cover (103) to the Backrest (8) with two M6 x 18mm Screws (75).
10 9 44 40 42 43 2 10 Wire T ies Wire T ies 1 9. Orient the Upright (2) and the T op Shield (44) as shown. Slide the T op Shield upward onto the Upright. Have a second person hold the Upright (2) and the T op Shield (44) near the Frame (1) until step 10.
11 11 12 13 1 1. Identify the Right Handlebar (20), which is marked with a “Right” sticker , and orient it as shown. Attach the Right Handlebar (20) to the Upright (2) with two M8 x 16mm Screws (69). Attach the Left Handlebar (7) in the same way .
12 14 15 16 14. Identify and orient the Front Upright Cover (58) as shown. Attach the Front Upright Cover (58) to the Upright (2) with two M4 x 16mm Screws (77). 16. Plug the Power Adapter (51) into the receptacle on the frame of the exercise bike. T o plug the Power Adapter (51) into an outlet, see HOW T O PLUG IN THE POWER ADAPTER on page 14.
13 HOW TO PUT ON THE HEART RA TE MONITOR The heart rate monitor has two components: a chest strap and a sensor unit (see the drawing below). Insert the tab on one end of the chest strap into one end of the sensor unit, as shown in the inset drawing. Press the end of the sensor unit under the buckle on the chest strap.
14 HOW TO PLUG IN THE POWER ADAPTER IMPORT ANT : If the exercise bike has been exposed to cold temperatures, allow it to warm to room temperature before plugging in the power adapter . If you do not do this, you may damage the console displays or other electronic components.
15 CONSOLE DIAGRAM FEA TURES OF THE CONSOLE The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals with the touch of a button.
16 HOW TO USE THE MANUAL MODE 1. Begin pedaling or press any button on the console to turn on the console. When you turn on the console, the display will light. The console will then be ready for use. 2. Select the manual mode. Press the Manual Control button on the console to select the manual mode.
17 Press the Home button to return to the default menu (see HOW T O CHANGE CONSOLE SETTINGS on page 20 to set the default menu). If necessary , press the Home button again. When a wireless iFit Live module is connected, the wire- less symbol at the top of the display will show the strength of your wireless signal.
18 HOW TO USE AN ONBOARD WORKOUT 1. Begin pedaling or press any button on the console to turn on the console. When you turn on the console, the display will light.
19 HOW TO USE AN IFIT LIVE WORKOUT 1. Begin pedaling or press any button on the console to turn on the console. When you turn on the console, the display will light. The console will then be ready for use. 2. Insert the iFit Live module into the console.
20 HOW TO CHANGE CONSOLE SETTINGS The console features a user mode that allows you to view usage information, select a unit of measurement, and adjust the contrast level of the display .
21 Inspect and tighten all parts of the exercise bike regu- larly . Replace any worn parts immediately . T o clean the exercise bike, use a damp cloth and a small amount of mild soap. IMPORT ANT : T o avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.
22 HOW TO ADJUST THE DRIVE BEL T If the pedals slip while you are pedaling, even while the resistance is adjusted to the highest setting, the drive belt may need to be adjusted. T o adjust the drive belt, first unplug the power adapter . Then, you must remove the top shield, the right pedal, and the right shield (see the instructions below).
23 EXERCISE GUIDELINES These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember , proper nutrition and adequate rest are essential for successful results.
24 1 1 Frame 2 1 Upright 3 2 Front Stabilizer Cover 4 1 Console 5 1 Rail 6 1 Adjustment Bar 7 1 Left Handlebar 8 1 Backrest 9 1 Seat 10 1 Seat Pulse Wire/Pulse Grip Set 11 1 Seat Handlebar 12 1 Brake .
25 Note: Speci fi cations are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.
26 2 4 20 49 69 69 67 67 77 77 77 77 77 77 58 57 100 100 100 8 9 10 10 10 11 7 25 25 49 56 69 70 70 25 25 88 88 75 75 77 77 77 77 77 77 77 77 77 88 88 69 52 97 98 99 99 103 86 104 105 EXPLODED DRA WING A Model No.
27 1 5 6 12 13 14 15 16 17 17 19 19 21 22 23 24 27 26 29 30 30 31 33 95 28 33 34 35 36 37 38 39 41 42 43 45 46 47 3 3 48 48 50 50 51 53 55 55 55 55 59 89 74 59 55 89 59 59 59 74 18 55 89 59 74 74 64 8.
ORDERING REPLACEMENT P ARTS T o order replacement parts, please see the front cover of this manual. T o help us assist you, be prepared to provide the following information when contacting us: • the.
デバイスSears NTEX04911.0の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sears NTEX04911.0をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSears NTEX04911.0の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sears NTEX04911.0の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sears NTEX04911.0で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sears NTEX04911.0を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSears NTEX04911.0の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sears NTEX04911.0に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSears NTEX04911.0デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
