AvermediaメーカーEB1004の使用説明書/サービス説明書
ページ先へ移動 of 40
AVerMedia ® EB1004 BAK Real-time Security DVR Operation Manual.
FCC NOTICE This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limit s are designed to provide re asonable protection against harmful interference in a comm ercial, i ndustrial or business environment.
WARNING TO REDUCE RISK OF FIRE OR ELE CTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE . CAUTION DO NOT DISASSEMBLE THIS PRODUCT .PLEASE REFER TO YOUR LOCAL DEALER IF THERE IS A PROBLEM.
1 Table of Contents Chapter 1 Introduction ......................................................................3 1.1 Features and S pecificat ions ........................................................................ 3 1.2 Front Panel ...........
2 3.9 SENSOR SETUP ...................................................................................... 26 3.9.1 SENSOR RE CORD TIME ................................................................ 26 3.9.2 ALARM OUT TIME ...........................
3 Chapter 1 Introduction EB1004 BAK is a stand-alone, non-PC based DVR unit that provides real-time monitoring and digital recording of surveillance video. Up to four video cam eras and four sensor devices can be hooked up to this DVR unit. It is also equipped with an output relay that allows connection of an alarm device.
4 • Full-screen resolution: Display: 720 x 480 (NTSC), 720 x 576 (PAL) Recording: 640 x 224 (NTSC), 640 x 272 (PAL) • Display and recording frame rate: Quad mode: 30/25 fps (NTSC/PAL) per channel,.
5 1.2 Front Panel 1 3 4 5 6 7 12 11 12 13 14 2 9 8 10 15 16 17 18 19 20 1. REC : Start video recording. 2. MENU : Open/Close the OSD main menu or subsequent submenus. 3. : Go up one item. 4. : Go down one item. 5. SELECT : (a) Cycle through various options in a selected menu item.
6 14. : (a) Fast forward during playback. (b) Switch between the play list and the date/time search controls. 15. Removable hard disk rack with lock CAUTION BEFORE REMOVING THE REMOV ABL E OR INTERNAL HARD DISK, POWER OFF THE DVR UNIT FIRST . 16. Removable Hard disk LED 17.
7 1.4 Setting Up the DVR Unit 1.4.1 Installing Hard Drives Before you install hard drives, please adj ust the jumpers’ setting according to the instructions on your hard disk label. The DVR unit allows you to install up to two hard drives (a master and slave drive).
8 1.4.2 Install the Hard Drive in a Removable Case 1. After unlock the remo vable hard disk drawer, remove the removable hard drive drawer from the case. 2. Remove the upper cover of the drawer. 3. Connect the power connector to the hard drive as the right picture shows.
9 1.4.3 Install a Removable Hard D rive Case in a PC (Optional) For users who purchase an optional hard drive case, please follow the steps to install the case in a PC. 1. Power off your PC and re move the cover of your PC. 2. Remove a front cover and free a 5 1/4” drive bay.
10 1.4.4.1 Basic Devices • Cameras Connect the video output of each video camera or composite video source to the CH1 ~ CH4 connectors. • VGA monitor Connect a VGA monitor to the VGA OUT c onnector of the DVR unit to use as a display for video surveillance and playback.
11 Terminal 9 : Connect to the positive (+) wire of the alarm device Terminal 10 : Connect to the gr ound (-) wire of the alarm device • Desktop/Laptop computer Connect EB1004 BAK to a PC with a USB c able. Insert the USB connector to PC’s USB socket.
12 Chapter 2 Operating the DVR Unit 2.1 First Time Use Connecting the DVR unit to a power outlet au tomatically turns on its power . When you install new hard disks in y our DVR, the system will detect hard disks status and show “HDD FORMA T SELECT(YES) /MENU(NO)”.
13 Sometimes the system has trouble det ecting the hard disks, it shows “Turn off and on the DVR” on the screen. Follow the instruction to unplug DVR. Reboot and the system will show the normal first time use screen. After you format the hard drive(s), please en ter the default password before you enter the main menu.
14 EACH mode QUAD mode Use the following front panel buttons to sele ct the desired video camera to display in full screen: CH1: Camera 1 CH2: Camera 2 CH3: Camera 3 CH4: Camera 4 Note: The recording mode can be selected in the OSD main menu.
15 2.3.2 T o play back the recorded video 1 Press X to display the Playlist: 2 If you want to switch to the other har d drive or search for a range of video recordings, press . The ">" arrowhead cursor will th en move up to the top of the screen.
16 Chapter 3 Setup Menu MAIN MENU > CAMERA SELECT 1234 RECORD S ELECT 1234 RE COR D M ODE E AC H RE COR D FRAME RA TE 3 0 VIDE O QUAL ITY NORMAL RECORD SCHE DULE SU BMENU HARD DRIVE SE TUP S ENSOR .
17 1 Press button to display the OSD main menu. MAI N MENU > CAMERA SELECT 1234 RECORD SELECT 1234 RECORD MODE EACH RE C OR D FRA MER A TE 3 0 V IDEO QUAL ITY N ORMAL RECORD SCHEDULE SU BMENU HARD .
18 CH1: Camera 1 CH2: Camera 2 CH3: Camera 3 CH4: Camera 4 You can also press to cycle through different camera display combinations. For instance: (1 2 3 4) : Switch on all camera displays. (1 - - 4) : Switch on camera display 1 and 4 only. (- 2 3 -) : Switch on camera display 2 and 3 only.
19 3.4 RECORD FRAME RATE This sets the number of images per second of video that is recorded. By default, frame rate is set at 30 fps for NTSC, 25 fps for PAL. There are 8-9 different frame rates you can choose from. 3.5 VIDEO QUALITY There are three video quality settings to choose from: BEST, GOOD or NORMAL.
20 3.6 RECORD SCHEDULE By default, the DVR unit is customized for continuous 24-hour video recording. If you prefer to record video only at certain ti me schedules within a day, you can choose specific recording hours.
21 SUB MENU > PASSWO RD CHANGE TI M E S ET VGA S ETU P MO TION SETUP P AS S WORD SE TUP N O PRESS (< , >), THEN (SELECT ) PRESS ( MENU ) TO EX IT 3.
22 3.7.2 TIME SET TIME 2004/01/ 10 15:30: 25 ^ PRESS (< , >), THEN(S ELECT ) PRESS (M ENU) TO EX IT To change the system date and time: 1. Press or to move through the "year/month/day" and "hour:minute:second " entries.
23 3.7.4 MOTION SETUP T o change MOTION CAMERA, 1. Press or to move the arrowhead cursor to MOTION CAMERA in the menu. 2. Press the channel buttons to select cameras that you want to setup. To setup all cameras, press . You will see the screen shows MOTION CAMERA 1 2 3 4 .
24 2. Press repeatedly to cycle through the numbers. The time setting ranges from 5 to 30 seconds. Stop pressing the button when reach the desired numbers. 3.7.5 P ASSWORD SETUP You can change the PASSWORD SETUP se tting under the SUB MENU to enable PASSWORD SETUP.
25 3.8 HARD DRIVE SETUP HARD DRIV E SETUP > OVER W RITE ENA BLED YES MASTER HDD SIZE 80072MB MASTER HDD USED 16014MB 20% MASTER HDD FO RMAT SL AVE HDD SIZE N/A SL AVE HDD U SED N/A SL AVE HDD FORMA T PRESS ( < , >), TH EN(SELEC T) PRESS ( MENU ) TO EXIT 3.
26 3.9 SENSOR SETUP SENSOR SETUP > SENSO R RECORD TIME 15 AL ARM OUT TIME 05 CH AN NEL -1 T YPE:N ORMAL -CL OS E CH AN NEL -2 T YPE:N ORMAL -OP EN CH AN NE L-3 NO T INS TA LL ED CH AN NE L-4 NO T INS TA LL ED PRESS (< , >), TH EN(SELECT) PRESS ( MENU ) TO EXIT 3.
27 Chapter 4 Connect to a PC EB1004 BAK provides a convenient tool to trace back the recorded surveillance video, catch specific images and save as AVI file s. With the EB-DVR Playback Application, users can play back the surveillance video , catch images and backup all recorded images easily .
28 Follow the instructions to install the driver: 1. Select a language. Click Next to continue the installation. 2. Insert the CD dr iver into CD-ROM’s plate. It will auto-r un. You will see the screen on the right side. Note: The application supports Windows 2000/XP only.
29 5. Click Finish to complete the installation..
30 4.2 Operating EB-DVR Playback Application Click to run the application. Select the hard disk and then se lect a proper video system according to your local video system. Click OK . Attention: Make sure you enter the Main Menu before use the USB function.
31 The sequences of the DVR hard disks will vary depending on the hard disk numbers in your PC. As the following illustrati ons show, please select a proper hard disk sequence according to the real situation when you run the playback application. Case 1 : The sequence of HDD A will be HDD2 .
32 HDD A will be HDD2 . HDD A will be HDD1 . Case 7 : Place HDD B in the removal hard disk drawer . The sequence of HDD B will be HDD2 . Case 8 : Place HDD B in the removal hard disk drawer .
33 1. Channel 1- Channel 4: Switch between cameras. 2. Change Driver: Switch bet ween dif ferent hard disks. 3. Event List: Display all the re corded events stored in hard disks. 4. Play: Play the recorded video. 5. Backward play: Play the video backward.
34 Attention: When you want to read the data in the HDD A via a U SB cable directly without removing the hard disk, follow the following picture to connect the hard disks in the DVR. When you need to read HDD B via a USB cable. Please plug the middle connector of IDE cable in HDD B and the other connector to HDD A as the following picture.
35 the sensor detects an event. Event List enables you to playback any recorded event anytime. When you decide which ev ent to play, click to display the video or click to display a recorded dynamic event reversely. Click to search the appointed video.
36 Click to pause the playing. Click to stop the video. 4.2.3 Catch Images and V ideo EB-1004 BAK Playback Application provides functions to output both dynamic and static images. Users can easily catch a st atic screen and save it as a BMP file, or save some fragment of recorded video as an AVI file.
37 W arranty Notice LIMITED WARR ANTY AVerMedia TECHNOLOGIES, Inc. warrants th is product to be free of defects re sulting from faulty manufacture or components under the following terms: WARRANTY LENGTH Labor is warranted for (1) one y ear from the date of purcha se.
デバイスAvermedia EB1004の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Avermedia EB1004をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAvermedia EB1004の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Avermedia EB1004の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Avermedia EB1004で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Avermedia EB1004を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAvermedia EB1004の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Avermedia EB1004に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAvermedia EB1004デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。